ProSafe™ FS752TP 54-Port 10/100/1000 Fast Ethernet Smart Switch

ProSafe™ FS752TP 54-Port 10/100/1000 Fast Ethernet Smart Switch is a state-of-the-art, high-performance, IEEE-compliant network solution designed for users who require a large number of ports and want the power of Gigabit connectivity to eliminate bottlenecks, boost performance, and increase productivity. There are 48 twisted-paired ports with four gigabit ports (two are combo ports with SFP GBIC slots) on the front panel of the switch. To simplify installation, the switch is shipped ready for use out of the box.

• 54-Port 10/100/1000 Smart switch
• 4000 MAC Addresses
• The 10/100/1000 base-T ports are auto-sensing using RJ-45 UTP connectors
• Flexible, energy-efficient PoE: With a generous total power budget of 384 Watts, the ProSafe FS752TP connects up 48 devices based on IEEE 802.3af – including up to four high-power IEEE 802.3at devices. PoE optimizes the installation and management of network devices such as VoIP phones, wireless APs and IP-based surveillance cameras by requiring only a standard Cat 5 UTP cable to carry both power and data–reducing installation time and cost. The ProSafe FS752TP also comes with a PoE timer to increase network security and energy efficiency by allowing IT administrators to remotely turn ports off and on
• Sophisticated traffic management: ProSafe FS752TP goes beyond basic VLAN and QoS for network traffic management, with Auto Voice VLAN and Auto Video VLAN. These advanced features automatically detect IP phones and cameras on the network, put them in a designated voice or video VLAN, and then assign the proper traffic priorities and security profiles. This plug-and-play approach reduces initial set up time as well as simplifying ongoing monitoring, maintenance and changes
• Multiple Management Options: As a smart switch, the ProSafe FS752TP offers IT administrators flexibility in network management. Individual switches can be managed through a simple browser-based graphical user interface. The ProSafe FS752TP can also be managed through SNMP (v1, 2c and 3) for compatibility with existing SNMP-based consoles. For larger deployments, NETGEAR’s Smart Control Center is a free Windows-based application for discovering, configuring and upgrading multiple smart switches across the network. For networks including other devices from NETGEAR such as switches, wireless access points and NAS, the NETGEAR Network Management System (NMS-200) can manage them all from a single console for extensive visibility, granular control and seamless automation across the entire network
• 48 PoE-capable ports with PoE Plus supports on the first 4 ports
• Cost-effective solution for large VoIP and video surveillance deployments
• 48 10/100 Mbps auto sensing Fast Ethernet 4 10/100/1000 Mbps auto-sensing gigabit Ethernet switching ports (RJ-45) 2 dual personality SFP slots
• Administrative switch management: – IEEE 802.1Q static VLAN – (128 groups, static), IEEE 802.1p Class of Service (CoS), Port-based QoS, DSCP-based QoS, DiffServ, IEEE802.3ad link aggregation – (manual or LACP), IEEE 802.1D Spanning Tree – Protocol (STP), IEEE 802.1w Rapid Spanning – Tree Protocol (RSTP), IEEE 802.1s Multiple Spanning – Tree Protocol (MSTP), IEEE 802.1ab Link Layer Discovery – Protocol (LLDP), LLDP-MED, SNMP v1, v2c, v3, RFC 1213 MIB II, RFC 1643 Ethernet interface MIB, RFC 1493 bridge MIB, RMON group 1, 2, 3, 9, RFC 2131 DHCP client, Voice VLAN, Auto-VOIP, DHCP Filtering, Auto denial-of-service (DoS) protection, HTTP and HTTPS, Ping and trace route, Power saving when link down, IEEE 802.1x, Port-based security by locked – MAC addresses, IP and MAC ACL, Storm control for broadcast, multicast and unknown unicast packets, IGMP snooping v1/v2/v3, Protected Port, PoE Timer, Port-based ingress and egress rate – limiting, SNTP, Port mirroring support (many to one), Static Routing (support for up to 10 static routes), Web-based configuration, configuration backup/restore, Password access control, RADIUS Support, TACACS+ support, Syslog, Firmware upgradeable, Cable test
• Forwarding modes: Store-and-forward
• Bandwidth: 17.6 Gbps
• Network latency: Less than 20µs for 64-byte–frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
• Buffer memory: 1.5 Mbps
• Acoustic noise: 34.5 dBA
• PoE budget: 384W
• Address database size: 4, 000 media access control (MAC) addresses per system
• Addressing: 48-bit MAC address
• Mean time between failures (MTBF): 230731 hrs at 25C
• Power consumption: 539W maximum
• 100-240VAC/50-60-Hz universal input
• Operating humidity: 90% maximum relative humidity, non-condensing
• Storage humidity: 95% maximum relative humidity, non-condensing
• Operating temperature: 0 to 50 deg C
• Storage temperature: -20 to 70 deg C
• Operating altitude: 3, 000 m
• Storage altitude: 3, 000 m
• Electromagnetic emissions: CE EN 55022, EN 61000 and EN 55024, FCC Part 15 Class A, VCCI Class A, C-Tick, KCC, CCC
• Safety: UL/cUL 60950, CE EN 60950-1, CCC, CB
• Modules: AGM731F 1000BASE-SX SFP Module, AGM732F 1000BASE-LX SFP Module, AGM733 1000BASE-ZX SFP ModuleAFM735 100BASE--FX SFP LC Module

Compare with similar items