ProSafe™ GS110TP 10-Port 10/100/1000 Gigabit Ethernet Smart Switch

ProSafe™ GS110TP 10-Port 10/100/1000 Gigabit Ethernet Smart Switch is packed with powerful features capable of enhancing any type of business network. The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed and PoE capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber ports for uplinks with greater distance.

• 10-Port 10/100/1000 Smart switch
• 4000 MAC Addresses
• GS110TP offers useful PoE power management features to help you better control and monitor your power resourcec
• NETGEAR green: Up to 60% lower power consumption than the previous model1, Auto power-down mode conserves energy when a port is not connected, Less transmit power when the cable is short (under 10 m), Packaging manufactured with at least 80% recycled material
• 802.1p-based prioritization
• Rate limiting
• Advanced Quality of Service (QoS): Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads
• Advanced security: 802.1x for authentication, ACL filtering to permit or deny traffic based on MAC or IP addresses
• Eight (8) 10/100/1000 Mbps auto sensing + 2 Gigabit SFP uplinks
• Administrative switch management: IEEE 802.1Q Static VLAN (64 groups, Static), Protected Ports, IEEE 802.1p Class of Service (CoS), Port-based QoS, DSCP-based QoS, DiffServ, IEEE802.3ad Link Aggregation (manual or LACP), IEEE 802.1w Rapid Spanning Tree Protocol (RSTP), IEEE 802.1s Multiple Spanning Trees Protocol (RSTP), IEEE 802.1ab Link Layer Discovery Protocol (LLDP), SNMP v1, v2c, v3, RFC 1213 MIB II, RFC 1643 Ethernet Interface MIB, RFC 1493 Bridge MIB, RMON group 1, 2, 3, 9, Auto Voice VLAN, DHCP Filtering, Auto denial-of-service (DoS) protection, HTTP and HTTPS, Ping and trace route, Power saving when link down, RFC 2131 DHCP client, IEEE 802.1x with Guest VLAN, Jumbo frame support, Port-based security by locked MAC addresses, MAC and Ip-based ACL, Storm control for broadcast, multicast and unknown unicast packets, IGMP Snooping v1/v2, Port-based egress rate limiting, SNTP, Port Mirroring Support (Many to one), Web-based configuration, Configuration Backup/Restore, Password Access Control, RADIUS Support, TACACS+ and RADIUS support, Syslog, Firmware upgradeable, PoE (46 watts of power budget)
• Forwarding modes: Store-and-forward
• Bandwidth: 20 Gbps full duplex
• Network latency: Less than 4 µs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
• Buffer memory: 512 KB embedded memory per unit
• Zero acoustic noise
• PoE budget: 46W
• Address database size: 4k media access control (MAC) addresses per system
• Auto VoIP, Auto Video and ACL wizard for easy network deployment
• Mean time between failure (MTBF): 157004 hrs
• Power consumption: 59.3W maximum
• Centralized management software for easy deployment and configuration of multiple switches
• Operating humidity: 90% maximum relative humidity, non-condensing
• Storage humidity: 95% maximum relative humidity, non-condensing
• Operating temperature: 0 to 50 deg C
• Storage temperature: -20 to 70 deg C
• Operating altitude: 3, 000 m
• Storage altitude: 3, 000 m
• Electromagnetic emissions: CE mark, commercial, FCC Part 15 Class A, VCCI Class A, C-Tick
• Safety: CE mark, commercial, cUL IEC 950/EN 60950, CB
• Centralized management via the new smart control center: With multiple switches in the network, managing configurations on each switch and upgrading firmware becomes a big challenge. NETGEAR’s Smart Control Center that comes with the GS110TP and many other Smart switch models can help make this task much easier and simpler. It can perform discovery of the switches on your network, push configuration and firmware updates to multiple selected switches at once, and can even schedule when the tasks should be performed

Compare with similar items