ProSafe™ GSM7328FS 29-Port 10/100/1000 Gigabit Ethernet Switch

ProSafe™ GSM7328FS 29-Port 10/100/1000 Gigabit Ethernet Switch deliver maximum throughput and flexibility where you need it — to high-speed, high-density workgroups at the edge of the network, in the backbone of growing networks or for bandwidth-thirsty file and application servers. The ProSafe GSM7328S and GSM7352S fully-managed switches deliver 24 and 48 ports of auto-sensing 10/100/1000 Mbps interfaces for high-density copper connectivity. The non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency throughput to all ports. A full suite of Layer 3 switching functionality ensures reliable routing between VLANs and network segmentation where and when you need it, at no additional cost.

• 48-Port 10/100/1000 (Gigabit Ethernet) Smart Switch
• Up to 8000 MAC addresses
• 48 10/100/1000 ports with 4 built-in shared SFP gigabit ethernet fiber ports for 100/1000 connectivity and 2 HDMI ports on the rear of the unit - used for stacking only
• Desktop/rack/stack mountable
• Layer 3 switching
• Management: management VLAN, 4 hardware queues, port-based QoS, SNMP v1, v2c, v3, MIB II, ethernet interface MIB, bridge MIB, DHCP client, RADIUS accounting, layer 3 (DSCP) quality of service (QoS), TACACS+, port-based security by locked MAC addresses, TCP/UPD-based priority mapping, IGMP snooping v1, v2, v3, MAC and IP address ACL, storm control for broadcast, multicast and unknown unicast packets, port-based ingress/egress rate limiting, SNTP, RMON group 1, 2, 3, 9, private enterprise MIB, port mirroring - many-to-one, LLDP-MED, protected ports, cable test, web-based configuration, configuration backup/restore, password access control, firmware upgradeable, IEEE 802.1Q VLAN (128 groups, static), IEEE 802.1p class of service (CoS), IEEE 802.3ad static or dynamic link aggregation (LACP), IEEE 802.1D spanning tree protocol, IEEE 802.1w rapid spanning tree protocol, IEEE 802.1s multiple spanning tree protocol, IEEE 802.1x (RADIUS), IEEE 802.3ab LLDP
• Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X, IEEE 802.3x full-duplex flow control, RFC 1213, RFC 1643, RFC 1493, RFC 2131
• Safety: CE mark, commercial, CUL 60950 (listed)/EN 60950 (low voltage directive), Electromagnetic compliance: CE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22), EN 55024 (CISPR 24), C-Tick
• 100 - 240 VAC, 50 - 60 Hz, universal input
• 78.36 W power consumption
• 96 GBPS bandwidth
• Stacking up to 288 pps
• Less than 20 microseconds network latency for 64-byte frames in store-and-forward mode for 1000 MBPS to 1000 MBPS transmission
• Modules: AGM731F ProSafe 1000BASE-SX SFP GBIC module, AGM732F ProSafe 1000BASE-LX SFP GBIC module, AGM733 ProSafe 1000BASE-ZX SFP GBIC module
• 11.38 lbs
• 1.7"(H) x 17.32"(W) x 12.2"(D)
• Limited lifetime warranty

Compare with similar items