New day. New Daily Deals. Get them before they are gone!
Can't find what you're looking for? Shop all ink and toner cartridges by brand
New day. New Daily Deals. Get them before they are gone!
How 3D Printing Has Evolved
by Kevin Ackerman, Staples® Contributing Writer
The first photocopied document was produced in 1938, but photocopiers didnt make their way into offices around the globe until the late 1960s. Meanwhile, 3D printing was first invented in 1983 and we saw adoption by businesses in the early 2000s. Moving faster into the mainstream than its predecessor, this new technology has quickly blossomed because of new printing techniques, an ever-growing range of new materials to output objects in, and easy access to 3D printing devices.
Improved Printing Technologies
New York Citybased designer Bradley Rothenberg has witnessed 3D printings evolution firsthand. His work, including 3D-printed lingerie and wings for Victorias Secret, has pushed the limits of fashion and fabrication. And his experience with 3D printing, as the field has developed, shows how far it has come in the past 10 years.
Rothenberg was first introduced to 3D printing in 2005 while studying architecture at New York Citys Pratt Institute. This first object Rothenberg printed was a model of a pavilion, produced to show how the complex, curved surface would interact with light. But the colleges printer was a very low-resolution machine, and after the object finished printing, it was spent. "Actually, my first print broke, he admits. It didn't work because I printed it too small.
But if Rothenberg had a chance to produce the miniature pavilion with todays 3D printing technology, it would stand much taller. In 2005, 3D printers primarily created objects using fused deposition modeling (FDM), a method like inkjet printing in which hot material (usually plastics) is extruded through a print head. "When we first saw the 3D printer at Pratt, we realized, basically, it's just a regular 2D printer, like an HP printer, he says. "In fact, it even used HP print heads.
While FDM has improved through the years, printing in thinner layers and other materials (like rubber and clay), alternative, more intricate methods have emerged. For instance, Plastic Jet Printing, used on the Cube® 3D printer, can produce layers as thin as two tenths of a millimeter using ABS or PLA plastics.
Rothenberg prints using Selective Laser Sintering (SLS), which uses a high-powered beam of light to melt powdered metals, ceramics, plastics and other materials into three-dimensional shapes, and is a big improvement over his college printer. For example, back in college the smallest size Rothenberg's pavilion printer could produce in was 4 millimeters. "Currently, the printers we use on a day-to-day basis can print down to features as small as about 0.7 millimeters, he says. In addition, while it used to take Rothenberg eight hours to print a 4 object, now he estimates two or three hours generates the same size.
But 3D printings next big technological leap may not be in printing at all, but in scanning, using tools like the Cubify® Sense 3D scanner. "I can print a replica of your body, or I could scan a broken part of my car and send that scan to a 3D printer," says William Dante, founder of the Association of 3D Printing.
Being able to output in more materials has also propelled 3D printing. A few years ago, you could 3D print about seven substances and most of them were plastic, says Dante. "Now, we can print in hundreds of substances pretty much anything I can get into a consistency of a powder, I can print with." That means plastic, metal alloys, glass, chocolate, sugar, pharmaceuticals and even human tissue are 3D printable. And innovators have used these materials to print objects as varied as wristwatch bands and human heart valves.
In addition to material options, color selection has improved. Depending on the printing method and materials used, objects can even be output in full color, with multiple hues appearing on the same object, using the same materials.
Better Access to Printers
Improvements in technology dont just help devices to perform better they often make gadgets less expensive and more accessible as well. For instance, the printer that Rothenberg used in 2005 was the size of an ATM machine, weighed hundreds of pounds and cost thousands of dollars, and his school only had one of them. Today, 3D printers are small enough to sit on your desktop and cost only a few hundred dollars, and anyone can buy one for their home or office.
But for some users, an even better option than buying a small, inexpensive 3D printer is to not own one at all. Online 3D printing solutions let users produce objects without having to invest in the technology whatsoever. All they need to do is upload their 3D printing file through an Internet-based service, select the appropriate output options, and press buy. The object is output at a remote facility and delivered days later.
For even faster service, people in New York City and Los Angeles can print in stores, using Staples 3D printing service. With the latest in-store technology, including design software, printers and scanners, these locations are great resources for people new to 3D printing, or for experts who need bigger printers, full color or other materials to output their designs. The concept is great for businesses and consumers, Dante explains, because it frees them from having to invest in the latest technology. "Let Staples worry about the filaments and the technology changing, he says.
In addition, having easy access to experts makes local solutions like Staples 3D Printing Services even more valuable, Dante adds. Why should I walk into Staples when I can do this online? he asks. "Because if theres something wrong, I've got someone. I've got a human being."
Related Products & Services: