Expandable Storage Racks

Carrying documents from desk to desk or shuffling them about is messy and pass. This mobile plan center lets you easily roll your files anywhere, anytime. Simply drop the files in and lift them out, as needed. Composed of heavy gauge steel with ball bearing swivel casters (2 with brakes), this unit allows for up to 18 hanging clamps with adjustable widths of 24 in to 42 in. (Clamps are sold separately). The stand is simple to set up and simple to use..Measuring 51"H x 47"L x 20"D with an adjustable length from 29 to 47 inches, this mobile rack will effectively store your larger files with ease.To provide long-lasting strength and use throughout the years, this mobile blueprint stand is composed of heavy gauge steel with a powder-coated finish.Large file storage rack boasts a 360-pound weight capacity and can hold up to 1800 documents at once.The bottom is outfitted with four, ball-bearing swivel casters to facilitate easy movement from one location to the next with two lockable front casters to keep the unit securely in place when you get to your destination.Accommodating up to 18 clamps at the same time, just clamp your files into the paper clamps and drop them into the top bracket for quick access to your hanging blueprints.Fits 18 clamps 24”, 30”, 36”, or 42” long.Minimum Outer dimensions: 29”L x 20”W x 51”H.A perfect storage area for hanging maps, blueprints, plan drawings and other large-format documents.1 year manufacturer warranty.Black finish.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Blueprint, Maps, Filing and Storage

Household Essentials Bamboo folding dryer features 11 drying rods and folds for an easy storage when not in use. Dryer provides ample room for delicates, towels, bedding and anything else that could benefit from a little fresh air..Elegance and nature unite again in this beautiful Bamboo dryer.Material: Bamboo.Dimensions: 42 1/8"(H) x 29"(W) x 14 1/8"(D).11 drying rods provide up-to 25' of energy-saving drying space.Ample room for delicates, towels, bedding, and anything else that could benefit from a little fresh air.It folds compactly for easy storage, though its understated elegance may keep it out of the closet.Elegant bamboo frame constructed from sustainable and renewable bamboo.Household Essentials Folding dryer is made entirely of naturally vibrant bamboo and features up to 25' of drying space providing ample space for delicates, towels and bedding.

The AD74-1836C Chrome Wire Shelving Add-On Kit has been specifically designed to expand Chrome Wire Shelving Starter Kits. A set of posts is shared between the two kits. Each Add-On Kit comes with 2 posts, 4 shelves and 8 S-hooks..36" x 18" x 74".800 lb. capacity.1/each.Chrome Finish

The AD74-2436C Chrome Wire Shelving Add-On Kit can be attached to a Chrome Starter Kit to extend its storage capacity. This can be done in a number of configurations including parallel, side to side and right angle arrangements. Comes with four shelves (800 lbs. of weight capacity each), two posts and eight S-Hooks.36" x 24" x 74".800 lb. capacity.1/each.Chrome Finish

The AD74-2448C Chrome Wire Shelving Add-On Kit is used to extend the storage space of a Chrome Wire Shelving Starter Kit. It can be installed in a back-to-back, sideways or right angle configuration. Each wire shelf allows air to circulate freely and has a load capacity of 800 lbs..48" x 24" x 74".800 lb. capacity.1/each.Chrome Finish

The AD74-2460C Chrome Wire Shelving Add-On Kit allows for the extension of a corresponding Chrome Wire Shelving Starter Kit. It can be installed in a parallel, side to side or right angle configuration. Each wire shelf allows air to circulate freely and has a load capacity of 600 lbs. Each Add-On Kit comes with 2 posts, 4 shelves and 8 S-hooks..60" x 24" x 74".600 lb. capacity.1/each.Chrome Finish

Carrying documents from desk to desk or shuffling them about is messy and pass. This mobile plan center lets you easily roll your files anywhere, anytime. Simply drop the files in and lift them out, as needed. Composed of heavy gauge steel with ball bearing swivel casters (2 with brakes), this unit allows for up to 18 hanging clamps with adjustable widths of 24 in to 42 in. (Clamps are sold separately). The stand is simple to set up and simple to use..A perfect storage area for hanging maps, blueprints, plan drawings and other large-format documents.Accommodating up to 18 clamps at the same time.Large file storage rack boasts a 360-pound weight capacity and can hold up to 1800 documents at once.Measuring 51"H x 47"L x 20"D with an adjustable length from 29 to 47 inches, this mobile rack will effectively store your larger files with ease.To provide long-lasting strength and use throughout the years, this mobile blueprint stand is composed of heavy gauge steel with a powder-coated finish.The bottom is outfitted with four, ball-bearing swivel casters to facilitate easy movement from one location to the next with two lockable front casters to keep the unit securely in place when you get to your destination.Accommodating up to 18 clamps at the same time, just clamp your files into the paper clamps and drop them into the top bracket for quick access to your hanging blueprints.Fits 18 clamps 24”, 30”, 36”, or 42” long.Minimum Outer dimensions: 29”L x 20”W x 51”H.1 year manufacturer warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Blueprint, Maps, Filing and Storage

The Tripp Lite SmartRack® SRWO8U22MD 8U/12U/22U expandable very low-profile patch-depth open rack frame has heavy-duty steel construction with a durable black powder-coated finish. The cabinet has a maximum load capacity of 150 lb. Easy to assemble and suitable for installing patch panels and other shallow networking equipment in secure IT areas with limited floor space..Expandable very low-profile patch-depth open rack frame is suitable for installing patch panels and other shallow networking equipment.Dimensions: 45.22 (8U), 63 (12U), 107.45 (22U) cm H x 51.08 cm W x 30.48 cm D, 19"D (rack), Maximum device depth: 30.48 cm.Black steel.Form factor: Wall mountable.Maximum weight capacity: 150 lbs..Rack height (U spaces): 8.Houses EIA-standard 19" rack equipment up to 11 1/2" deep.Open-frame design in 3 configurations: Assembles in 8U, 12U or 22U to meet current needs, allows easy access for organizing, servicing and cabling.Made from heavy-duty steel with a black powder-coated finish, easy to assemble w/included hardware, vertical mounting rails with threaded 12-24 holes.Includes rack frame, 24x12-24 mounting screws, 16xM5 cap screws, 8xM6x12 head screws, 2xshort/long rails, 2xmounting rail tie plates, owner's manual.Meets Green compliant, RoHS, EIA-310-D, IEC 60297-3-100 standards.Weight: 6.71 Kg, Weight varies depending on configuration 8U = 10.24lbs, 12U = 11.25lbs, 22U: 14.08 lbs..Comes with 5 year limited warranty

Increase the storage capacity in your closet or supply room with this shelving add-on kit. The shelves have a weight capacity up to 600-pounds, which makes them ideal for heavy tools, and the open design provides adequate ventilation. This Quantum Storage Systems wire shelving unit has a chrome finish for a professional appearance..These extra shelves provide expansion of storage capacity on a corresponding shelving unit and come complete with four shelves, two posts, and eight S-hooks.Chrome-finished wire construction provides adequate air flow and high visibility of stored goods from every side.Four non-adjustable shelves.Has a weight capacity of 600 lbs. per shelf evenly distributed.Overall dimensions: 74"H x 72"D x 18"W; each shelf dimensions: 18"W x 72"D.Units can be combined at a right angle, straight line, and back-to-back configuration.Allows for the use of optional accessories including dividers, ledges, and inlay mats.Create additional storage to your existing wire shelving with this Quantum Storage Systems wire shelving add-on kit.

The Tripp Lite SmartRack expandable low-profile open-frame rack with 150 lbs. load capacity, secures and organizes 19U of 19" rack equipment up to 23.5" deep in locations with limited floor space. The pivoting, 2-post open-frame design provides convenient access for installing, configuring and servicing equipment and cabling from any direction. Heavy-duty steel with black powder-coated finish provides durability. It is suitable for setting up UPS systems, battery packs, network switches and patch panels in secure IT areas. The open-frame design helps to configure this rack to 8U, 12U or 22U to meet current needs. Rack comes with assembly and equipment-mounting hardware for easy installation..Rack height: 8U, 12U, 22U.Weight capacity: 150 lbs..Dimensions: 17.8" (8U), 24.8" (12U), 42.3" (22U)H x 20.11"W x 24"D.Device depth: 23.5".Perfect for installing UPS systems, battery packs, network switches and patch panels in secure IT areas with limited floor space.Expands to add equipment later without buying a bigger rack.Offers easy access for organizing, installing and servicing equipment and cabling.Heavy-duty steel construction with a black powder-coated finish offers added durability.Easy to assemble with included hardware.Vertical mounting rails with threaded 12-24 holes.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Contains 24 x 12-24 mounting screws, 16 x M5 button-head cap screws, eight M6 x 12 Phillips-head screws, two short vertical mounting rails.Meets EIA-310-D, IEC 60297-3-100, RoHS certifications and standards.Weight: 8U = 13.03 lbs., 12U = 14.04 lbs., 22U = 16.87 lbs..Comes with 5 years limited warranty

The Adir Expandable Mobile Plan Center 615 is perfect for hanging blueprint storage of your largest files. Just clip your large documents, such as blueprints, plan drawings, and maps, into a hanging file clamp, and place the clamp into the bracket. This mobile blueprint rack has an 18 clamp capacity, and can be adjusted to fit hanging clamps 24, 30, 36, or 42 inches long. (Only one size clamp will fit into this mobile plan rack at a time). Hanging paper clamps are sold separately..Measuring 51"H x 47"L x 20"D with an adjustable length from 29 to 47 inches, this mobile rack will effectively store your larger files with ease.To provide long-lasting strength and use throughout the years, this mobile blueprint stand is composed of heavy gauge steel with a powder-coated finish.Large file storage rack boasts a 360-pound weight capacity and can hold up to 1800 documents at once.The bottom is outfitted with four, ball-bearing swivel casters to facilitate easy movement from one location to the next with two lockable front casters to keep the unit securely in place when you get to your destination.Accommodating up to 18 clamps at the same time, just clamp your files into the paper clamps and drop them into the top bracket for quick access to your hanging blueprints.Fits 18 clamps 24”, 30”, 36”, or 42” long.Minimum Outer dimensions: 29”L x 20”W x 51”H.A perfect storage area for hanging maps, blueprints, plan drawings and other large-format documents.1 year manufacturer warranty.Black finish.⚠ WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Blueprint, Maps, Filing and Storage