Ladder 300 lb
39 results
The FS1502 fiberglass 2' step ladder has a duty raiding of 300 lbs. Allows two users to work on the same ladder simultaneously to easily accomplish tasks that would be more difficult for a single person. Solid non-conductive fiberglass rails for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 24" L x 17" W with an approximate 20.1" spread.Angled aluminum slip resistant rubber feet.Large molded top.Heavy-duty gusset bracing.Equipped with a wide top, pinch-resistant spreader braces.Double-rivet step construction.Safe for working around electricity.Strong and durable
The L6206 fiberglass 6' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps..Type IA duty rating leaning ladder made of fiberglass.Leaning ladder is 74.4" L x 24" W with an approximate 38" spread.Rated to hold up to 300 lbs..Top dimension is 7" D x 13" L.LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity.Dropped rear rail pivot point gets ladder closer to your work.Color and branding differentiates LEANSAFE from standard step ladders.Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode.Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode.Back-up plates reinforce all top connectors.Heavy-duty internal spreaders.Full set of rear horizontals spaced one per foot.EDGE360 bracing protects the ladder feet from every angle.Every rivet backed up by metal, metal plates, or washer to protect rails.Six-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 3' 10" and a maximum reach height of 10'.Six-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 2' 10"s and a maximum reach height of 9'
The D6228-2 fiberglass 28' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung extension ladder made of fiberglass.D-rung extension ladder is 168" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Smooth operating pulley with polypropylene rope.Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails.External guides at top of base section securely interlock rails.Heavy-duty extruded rung locks are spring loaded to operate smoothly.Pre-pierced holes for easy field installation of accessories.Base and fly separate easily to use base section as single ladder.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps
The D6224-2 fiberglass 24' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung extension ladder made of fiberglass.D-rung extension ladder is 144" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Smooth operating pulley with polypropylene rope.Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails.External guides at top of base section securely interlock rails.Heavy-duty extruded rung locks are spring loaded to operate smoothly.Pre-pierced holes for easy field installation of accessories.Base and fly separate easily to use base section as single ladder.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps
The D6240-2 fiberglass 40' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung extension ladder made of fiberglass.D-rung extension ladder is 240" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Smooth operating pulley with polypropylene rope.Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails.Two sets of external guides at top of base section securely interlock rails.Heavy-duty extruded rung locks are spring loaded to operate smoothly.Pre-pierced holes for easy field installation of accessories.Base and fly separate easily to use base section as single ladder.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps
The D6220-2 fiberglass 20' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung extension ladder made of fiberglass.D-rung extension ladder is 120" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Smooth operating pulley with polypropylene rope.Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails.External guides at top of base section securely interlock rails.Heavy-duty extruded rung locks are spring loaded to operate smoothly.Pre-pierced holes for easy field installation of accessories.Base and fly separate easily to use base section as single ladder.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps
The L6212 fiberglass 12' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps..Type IA duty rating leaning ladder made of fiberglass.Leaning ladder is 146.4" L x 34.85" W with an approximate 75" spread.Rated to hold up to 300 lbs..Top dimension is 7" D x 13" L.LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity.Dropped rear rail pivot point gets ladder closer to your work.Color and branding differentiates LEANSAFE from standard step ladders.Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode.Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode.Back-up plates reinforce all top connectors.Heavy-duty internal spreaders.Full set of rear horizontals spaced one per foot.EDGE360 bracing protects the ladder feet from every angle.Every rivet backed up by metal, metal plates, or washer to protect rails.Twelve-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 9' 7" and a maximum reach height of 16'.Twelve-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 6' 8"s and a maximum reach height of 13'
The FM1506 fiberglass 6' twin step ladder has a duty raiding of 300 lbs. Allows two users to work on the same ladder simultaneously to easily accomplish tasks that would be more difficult for a single person. Solid non-conductive fiberglass rails for working near electricity..Type IA duty rating step ladder made of fiberglass.Twin step ladder is 72" L x 22.8" W with an approximate 52.3" spread.Equipped with SHOX™ impact absorption system for damage prevention.Twin-sided ladder has heavy-gauge steel hinges for durability.Raptor Boot slip-resistant Boot.Inside spreader braces.Double-rivet step construction.Heavy gauge steel hinges
The 6203 fiberglass 3' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 36" L x 18.12" W with an approximate 23.13" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The D6210-1 fiberglass 10' D-rung straight ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung straight ladder made of fiberglass.D-rung straight ladder is 120" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Pre-pierced holes for easy field installation of accessories.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps
The D6210-1 fiberglass 12' D-rung straight ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung straight ladder made of fiberglass.D-rung straight ladder is 144" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Pre-pierced holes for easy field installation of accessories.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps
The D6208-1 fiberglass 8' D-rung straight ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung straight ladder made of fiberglass.D-rung straight ladder is 96" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Pre-pierced holes for easy field installation of accessories.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps
The P6202 fiberglass 2' platform ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height platform ladder made of fiberglass.Platform ladder is 48" L x 23.4" W with 8' reach height and an approximate 29.75" spread.Rated to hold up to 300 lbs..Platform is 14.6" D x 15" W.Back-up plates reinforce all top connectors.Large platform provides secure and comfortable work area.Slip-resistant Traction-Tred steps are double riveted.Full set of rear horizontals spaced one foot apart.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails
The P6208 fiberglass 8' platform ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height platform ladder made of fiberglass.Platform ladder is 120" L x 33.96" W with 14' reach height and an approximate 66.6" spread.Rated to hold up to 300 lbs..Platform is 14.6" D x 15" W.Safety guardrail encourages proper ladder use.Back-up plates reinforce all top connectors.Large platform provides secure and comfortable work area.Slip-resistant Traction-Tred steps are double riveted.Full set of rear horizontals spaced one foot apart.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Internal aluminum spreaders
The 6210 fiberglass 10' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 120" L x 30.36" W with an approximate 65.88" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The 6206 fiberglass 6' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 72" L x 23.4" W with an approximate 41.25" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The L6210 fiberglass 10' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps..Type IA duty rating leaning ladder made of fiberglass.Leaning ladder is 122.4" L x 31.2" W with an approximate 62.5" spread.Rated to hold up to 300 lbs..Top dimension is 7" D x 13" L.LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity.Dropped rear rail pivot point gets ladder closer to your work.Color and branding differentiates LEANSAFE from standard step ladders.Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode.Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode.Back-up plates reinforce all top connectors.Heavy-duty internal spreaders.Full set of rear horizontals spaced one per foot.EDGE360 bracing protects the ladder feet from every angle.Every rivet backed up by metal, metal plates, or washer to protect rails.Ten-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 7' 8" and a maximum reach height of 14'.Ten-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 6' 8"s and a maximum reach height of 13'
The 6212 fiberglass 12' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Step ladder made of fiberglass.Step ladder is 144" L x 33.84" W with an approximate 78.25" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The 6110 fiberglass 10' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot™ for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 120" L x 28" W with an approximate 65.75" spread.Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.HolsterTop with Lock-In System secures tools to increase productivity.Back-up plates reinforce all top connectors.Braces on top and bottom step.Double riveted slip-resistant Traction-Tred steps.Full set of rear horizontals spaced one per foot.Heavy-duty internal spreaders.Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3
The 6207 fiberglass 7' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 84" L x 25.12" W with an approximate 47.5" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The 6204 fiberglass 4' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 48" L x 19.92" W with an approximate 29" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The PD6206 fiberglass 6' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height podium ladder made of fiberglass.Podium ladder is 108" L x 31.5" W with 12' reach height and an approximate 56" spread.Rated to hold up to 300 lbs..Platform is 19.5" D x 16" W.Same reach height as a 8' step ladder.4X Work Zone to reach all directions.Extra-large platform for long standing comfort.LOCKTOP extended guardrail securely wraps around the work zone and holds an arsenal of tools.EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads.Double riveted slip-resistant Traction-Tred steps.Back-up plates reinforce all top connectors.All steps and two rear horizontals are knee-braced
The PD6208 fiberglass 8' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height podium ladder made of fiberglass.Podium ladder is 130" L x 34.5" W with 14' reach height and an approximate 68.2" spread.Rated to hold up to 300 lbs..Platform is 19.5" D x 16" W.Same reach height as a 10' step ladder.4X Work Zone to reach all directions.Extra-large platform for long standing comfort.LOCKTOP extended guardrail securely wraps around the work zone and holds an arsenal of tools.EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads.Double riveted slip-resistant Traction-Tred steps.Back-up plates reinforce all top connectors.All steps and two rear horizontals are knee-braced
The PD6210 fiberglass 10' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height podium ladder made of fiberglass.Podium ladder is 159" L x 38" W with 16' reach height and an approximate 68.2" spread.Rated to hold up to 300 lbs..Platform is 19.5" D x 16" W.Same reach height as a 12' step ladder.4X Work Zone to reach all directions.Extra-large platform for long standing comfort.LOCKTOP™ extended guardrail securely wraps around the work zone and holds an arsenal of tools.EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads.Double riveted slip-resistant Traction-Tred steps.Back-up plates reinforce all top connectors.All steps and two rear horizontals are knee-braced
The T6206 fiberglass 6' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 72" L x 23.4" W with an approximate 50.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The 6205 fiberglass 5' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 60" L x 21.6" W with an approximate 35.13" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The T6208 fiberglass 8' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 96" L x 26.84" W with an approximate 64.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The T6210 fiberglass 10' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 120" L x 30.36" W with an approximate 78.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The 6104 fiberglass 4' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 48" L x 19" W with an approximate 28.88" spread.Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.HolsterTop with Lock-In System secures tools to increase productivity.Back-up plates reinforce all top connectors.Braces on top and bottom step.Double riveted slip-resistant Traction-Tred steps.Full set of rear horizontals spaced one per foot.Heavy-duty internal spreaders.Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3
The PD6204 fiberglass 4' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height podium ladder made of fiberglass.Podium ladder is 84" L x 27.5" W with 10' reach height and an approximate 43.6" spread.Rated to hold up to 300 lbs..Platform is 19.5" D x 16" W.Same reach height as a 6' step ladder.4X Work Zone to reach all directions.Extra-large platform for long standing comfort.LOCKTOP™ extended guardrail securely wraps around the work zone and holds an arsenal of tools.EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads.Double riveted slip-resistant Traction-Tred steps.Back-up plates reinforce all top connectors.All steps and two rear horizontals are knee-braced
The T6204 fiberglass 4' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 48" L x 19.92" W with an approximate 36.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" W x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The 7407 fiberglass 7' step ladder has a duty rating of 375 lbs. and features 3" metal steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IAA duty rating step ladder made of fiberglass.Step ladder is 84" L x 26.84" W with an approximate 49" spread.Rated to hold up to 375 lbs..Top dimension is 7.25" D x 14.875" L.Extra heavy-duty aluminum HolsterTop with thick side plates.Back-up plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each front rail.Slip-resistant Traction-Tred steps are double riveted and have extra wide knee braces.Full set of rear horizontals are knee braced and spaced one per foot.Extra heavy-duty internal aluminum spreaders.Aluminum external rail shield helps protect against abrasion damage.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Slip-resistant foot pads attached to the EDGE structure.EDGE bracing system helps to decrease damage to rail.Every rivet backed up by metal, metal plates, or washer to protect rails.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
Louisville™ FE3200 Series 24' Industrial extension ladder is made of fiberglass for durability and high mechanical strength. Ladder has a full channel non-conductive side rails and can employed for lighter industrial use..Capacity: 300 lb..Overall length: 24'.Number of sections: 2.Step size: 3 1/4".Step shape: D.Bottom width: 17 1/16".Material: Fiberglass.It features outside slide guides.Rungs fully serrated for slip resistant surface; Non marring rail end caps.QuickLatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position.Standard: CSA Certified, OSHA Certified, ANSI A14.5.Rungs fully serrated for slip resistant surface.Non marring rail end caps.Louisville™ 300 lb. IA Class Series FE3200 Fiberglass Industrial Extension Ladder is non-conductive.
The T7404 fiberglass 4' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 48" L x 21.5" W with an approximate 36.13" spread.Rated to hold up to 375 lbs. per side.Top dimension is 8.25" D x 14.5" L.Heavy gauge aluminum extruded top with thick side plates.Back-up aluminum plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail.Slip-resistant Traction-Tred steps are double riveted and knee-braced.Extra heavy-duty internal aluminum spreaders.Rubber step bumpers to resist damage.EDGE bracing system helps to decrease damage to rail.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Aluminum external rail shield helps protect against abrasion damage.Shoe pads riveted to the EDGE structure.Every rivet backed up by metal, metal plates, or washer to protect rails.Designed for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
Louisville™ FE3200 Series 20' Industrial extension ladder is made of fiberglass for durability and high mechanical strength. Ladder has a full channel non-conductive side rails and can employed for lighter industrial use..Capacity: 300 lb..Overall length: 20'.Number of sections: 2.Step size: 3 1/4".Step shape: D.Bottom width: 17 1/16".Material: Fiberglass.It features outside slide guides.Rungs fully serrated for slip resistant surface; Non marring rail end caps.QuickLatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position.Standard: CSA Certified, OSHA Certified, ANSI A14.5.Louisville™ 300 lb. IA Class Series FE3200 Fiberglass Industrial Extension Ladder is non-conductive.
Louisville™ FS1500 Series 4' Extra-heavy duty step ladder has molded top with slots that helps to keep tools at hand. Step ladder has a secured step with six large headed semi-tubular steel rivets for an optimum strength..Capacity: 300 lb.Overall length: 4'.Number of steps: 4.Step size: 3".Step shape: Flat.Equipped with Da Boot for slip resistant footing.SHOX™ - superior impact absorption.ProTop™ - versatile and durable.A structural molded top with hardware tray, paint can holder, handyman´s tool slots, pipe holder.Curved top front provides leg comfort and convenient magnet to secure small steel parts.Double-rivet step construction.Inside spreader braces, wide back braces.Standard: CSA Certified, OSHA Certified, ANSI A14.5.Louisville™ Step Ladder has a curved top front to provide leg comfort and convenient magnet to secure small steel parts.
When you need to reach something on the top shelf or step up to a higher level such as a kitchen cabinet or closet shelf, the DMI Step Stool gives you the height and stability you need. Unlike most step stools, this one is designed with a handle and a non-slip base to ensure your safety. Never worry about items being out of reach or stepping onto high places again. Step platform measures 10"W x 14.5"L. Height of platform from floor: 9˝. Handle height from floor is 34˝. Overall dimensions: 17.3˝ (l) x 12.3˝ (w) x 34˝ (h). Weight capacity: 300 lbs. Some assembly required. Phillips screwdriver (not included) is required for assembly..FOOT STEP STOOL provides easy reach for objects out of grasp with the support of a convenient handrail for safety and stability. Step Stool Standing Aid platform is 9.5 inches from the floor..MULTIPURPOSE BED STEP, STAIR LIFTS OR BED STOOL to safely step up to high beds, out of tubs or showers, in or out of vehicles and hard to reach cabinets..WIDE STEP STOOL features a non-slip textured matting and reinforced rubber tips to enhance stability and provide additional safety..PORTABLE STEP is made of heavy duty steel construction with a chrome plated steel frame and wider legs that holds up to 300 pounds.STEP STOOL SPECS: Step platform measures 10 x 14.5. Height of platform from floor: 9”. Handle height from floor is 34”. Overall dimensions: 17.3”x12.3”x34” . Weight capacity: 300 pounds. Units must be placed on a dry and level surface to ensure stability.
Commercial 3-Step Folding Step Stool, 52-1/8"H, Gray (CSC11839GGO).Large 14 1/2w x 12 1/4d top platform step..22-1/2"W x 32-5/8" Spread x 52-1/8"H.Steps have nonskid treads..Folds for easy storage..Durable, tubular steel frame forms handrail and knee brace..WARNING: Metal ladders conduct electricity..Do not use where contact may be made with live electrical circuits..Working Height:52.13".ANSI Type IA, Extra Heavy Duty Commercial,OSHA Compliant.Three-Step—Opti-Bond™ Powder-Coated Finish..Large 14 1/2w x 12 1/4d top platform step; steps have nonskid treads. Folds for easy storage. Durable, tubular steel frame forms handrail and knee brace
COSCO 1 step molded folding step stool is ideal for any task around the house. Whether it’s reaching that high cabinet, changing a light bulb or washing the windows, this step stool makes it easier to get any job done. This Type 1A, 300 lb. weight capacity lightweight step stool provides security and stability for any situation. The folding feature to this step stool allows for easy transportation and storage..Lightweight; easy to carry..Secure and stable, with a large top step and slip-resistant treads..Easy-release fold and unfold..Compact design fits into small spaces for easy storage..300-lb weight capacity..ANSI Type IA, Extra Heavy Duty Commercial,OSHA Compliant.Platform Dimensions:12.75 x 9.Frame Material:Resin.Working Height: 8.5".These lightweight stepstools are sturdy, but at less than three pounds, easy to carry around for office tasks. With its large, heavy-duty top step and ribbed, slip-resistant step treads, these step stools provide added strength and stability. For your convenience, these step stools feature a self-locking fold and lock release. Compact design folds flat to 3 inches for easy transport and storage.