Manual Desks
187 results
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).1-2 users.Adjustable CPU positions.Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
When it comes to standing comfort, small adjustments can make a big difference!.Standing desk with gel wrist rest and mouse pad.Black, MDF.Primary work surface is 35.4" W x 23.2" D and is large enough to fit two 24” monitors and holds up to 35 lbs.Gas assist continuous height adjustment allows you to move smoothly and quietly between sitting and standing positions in seconds.Includes 3M Gel Wrist Rest for your keyboard and 3M Precise Mouse Pad.Height adjustment range from 6.2” to 20” above the desk accommodates a wide range of users.Pre-assembled solution eliminates need for installers.+10⁰/-10⁰ keyboard surface tilt to help achieve comfortable typing position.The 3M Precision Standing Desk provides maximum adjustability to achieve your most comfortable standing work position.
Humanscale’s QuickStand Eco is the next generation in portable sit/stand desk solutions. Sleeker, easier to use and comprised of more sustainable materials than ever before, our adjustable standing desk solutions are a vast improvement over the current generation of sit/stand surfaces. The award-winning QuickStand Eco features simple setup, portability and near effortless adjustability — transforming ordinary desktops into healthy, active workspaces..Designed to accommodate users of varying heights with 18.6” of work surface adjustment..Alternating between sitting and standing throughout the day can boost productivity and mood, and reduce the negative effects of sedentary behavior. QuickStand Eco’s seamless operation allows you to quickly sit or stand when you choose..As we consider the impact of our products on people both during manufacturing and when they are in use, QuickStand Eco is built with sustainable, non-toxic materials and is the embodiment of Humanscale's design philosophy..Its minimal aesthetic blends into any environment, and its easy-to-use cable management helps hide cords and cables out of sight..There are no knobs or levers to adjust - Humanscale's Continuous Force self-locking mechanism keeps the equipment safe and stable while you work..Practical for home and corporate offices, this revolutionary product helps you bring ergonomic comfort and wellness right to your workspace.
Add movement to your working day by converting your traditional desk or table into a dynamic sit-stand desk instantly. Alternating your position between sitting and standing throughout the day can help you work more healthy and increase productivity. Thanks to its gas spring technology this standing desk converter can be easily adjusted to your preferred height by holding down the lever. The extra wide, high quality MDF platform with rounded edges allows you to place either a widescreen monitor, two monitors or a monitor and a laptop to create your ideal workspace. The integrated grommet hole lets you install a monitor mount, too. The lower keyboard platform is wide enough to hold a large keyboard with number pad plus your mouse on a mouse pad. A built-in device channel holds your tablet or smartphone securely in place and even allows for routing your charging cable through the integrated slots. Integrated rubber feet ensure your tabletop remains free from scratches..Turn your traditional desk into an active sit-stand workstation with this 38" wide standing desk converter.EASY HEIGHT ADJUSTMENT: Effortlessly raise or lower this sit stand desk converter throughout the day for a more active workspace. This table top standing desk can be adjusted smoothly in height between 5.9" and 16.9" and holds up to 33 bs..WORK HEALTHIER: Alternate between sitting and standing for a healthier way to work and increased productivity. This sit to stand desk riser is designed to encourage movement helping you to stay energized and reduce the risk for neck, back and shoulder pain.DUAL MONITOR STANDING DESK: Improve your workflow and enjoy the wide tabletop space (38” wide), large enough for dual monitors or one monitor and one laptop with a built-in device slot to keep your phone or tablet securely in sight.SIMPLE SETUP: Easy to assemble right out of the box. Simply place this 38 inch wide standing desk riser on your current desk or table, attach the ergonomically placed keyboard tray and get back to work in no time.High-quality contemporary design with rounded edges fits perfectly into any office or home interior.Integrated rubber feet ensure your tabletop remains free from scratches.Supported by manufacturer's limited lifetime warranty.Designed to meet or exceed ANSI/BIFMA standard.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Upgrade Your Setup with Our Wide-Surface Desk Converter, Smooth Lift, and Posture-Perfecting Design
Humanscale’s QuickStand Eco is the next generation in portable sit/stand desk solutions. Sleeker, easier to use and comprised of more sustainable materials than ever before, our adjustable standing desk solutions are a vast improvement over the current generation of sit/stand surfaces. The award-winning QuickStand Eco features simple setup, portability and near effortless adjustability — transforming ordinary desktops into healthy, active workspaces..Designed to accommodate users of varying heights with 18.6” of work surface adjustment..Alternating between sitting and standing throughout the day can boost productivity and mood, and reduce the negative effects of sedentary behavior. QuickStand Eco’s seamless operation allows you to quickly sit or stand when you choose..As we consider the impact of our products on people both during manufacturing and when they are in use, QuickStand Eco is built with sustainable, non-toxic materials and is the embodiment of Humanscale's design philosophy..Its minimal aesthetic blends into any environment, and its easy-to-use cable management helps hide cords and cables out of sight..There are no knobs or levers to adjust - Humanscale's Continuous Force self-locking mechanism keeps the equipment safe and stable while you work..Practical for home and corporate offices, this revolutionary product helps you bring ergonomic comfort and wellness right to your workspace.
This manual height-adjustable frame is perfect for the office, schools, home, and most working environments. The easy-to-operate Mount-It! hand crank adjusts the desk height, giving you flexibility to sit or stand in seconds. The durable steel frame provides durability that is sure to withstand heavy and repeated use. Go above and beyond, and add an anti-fatigue floor mat or an under-desk CPU mount to your setup. Use this ergonomic sit-stand desk as a long-term investment for both your employees and your business. The tabletop is easily cleanable with a damp cloth..Burn more calories while you work, and improve your posture with this elegant and easy-to-use height-adjustable standing desk.Easy-to-use crank system adjusts the height of the desk from 30" from the ground up to 50".Comes with black steel legs and frame, featuring a white melamine tabletop.Dimensions: 30"-50"H x 47.5"W x 29.5"D; weight capacity: 132 lbs..Leg spacing can be adjusted from 44" to 64" to support most available tabletops.Excellent ergonomic desk solution for anyone who wants to work healthier on a budget.Tabletop is easily cleanable with a damp cloth.Supported by manufacturer's limited lifetime warranty
A desk designed for any scenario and a variety of tasks – ideal for art studios when painting or drawing, working in your home or business office, or for gaming. The desk features two tabletops, one large and one small, that can both be tilted to fit your needs or preferences. Easily roll the cart wherever you need and lock two of the wheels for added stability. Convert the desk into a standing height from 27.5 inches to 40 inches high with the manual knob, to support better posture and increase productivity..A sit-to-stand height adjustable desk that can be utilized in home or business offices, medical offices, or schools..Height adjustable from 27.5 inches to 40 inches..The desk has a solid walnut desktop with a matte gray steel frame..Assembled Dimensions: 26 inches (W) x 16 inches (D) x 27.5 inches to 40 inches (H) with an overall weight capacity of 20 lbs..Equipped with four 1.5-inch caster wheels (two locking)..Requires assembly – tools required included..Limited 1-Year Manufacturer's Warranty.The large desktop measures 17.5 inches (W) x 15.7 inches (D)..The small side desktop measures 9.8 inches (W) x 8.3 inches (D)..Dual tilting tabletops for a more comfortable way to work..Net Weight: 14 lbs..Seville Classics airLIFT Tilting Mobile Desk Cart packs flexibility and versatility in one convenient package so you can move and work in a more personalized and ergonomic workspace.
Built with a gas spring height adjustment, the Lotus™LT Standing Desk Converter allows you to comfortably sit or stand while working, with 15.5" of maximum height adjustment. A spacious top platform holds two monitors or a monitor and laptop, while the bottom level perfectly accommodates a keyboard and mouse. Keep your phone or other accessories within reach with a convenient device channel on the top platform. This standing desk converter arrives fully assembled – no complicated instructions, no mounting. Simply unpack your Lotus™ Standing Desk Converter and get started..Work comfortably sitting or standing with the height adjustment range from 4.38" to 15.5".Spacious top platform holds two monitors or a monitor and laptop; and the bottom level perfectly accommodates a keyboard and mouse.Keep your phone or other accessories within reach with the convenient device channel on the top platform.Arrives fully assembled: no complicated instructions, no mounting, just unpack and get started.Compatible with our Sit-Stand Single and Dual Monitor Arm Kit.Meets or exceeds BIFMA standard.Weight capacity: 35.1 lbs.Dimensions: 15.5"H x 31.5"W x 24.2"D.3-year manufacturer limited warranty.Easily transition from sitting to standing with the Lotus™ LT Standing Desk Converter.
The Corsivo Standing Desk Converter allows you to change positions effortlessly while you're hard at work. The gas spring adjustment allows for 15.5" of height adjustment, while the built-in device channel keeps your phone or other accessories within reach. This standing desk converter is designed for durability and lasting performance – simply attach the optional keyboard platform and embrace freedom to work in the way that's most comfortable to you..Easily adjust with the one-handed gas spring, featuring 15.5” of height adjustability.Two-tiered larger work surface can accommodate flexible setup options, holding two monitors or a monitor and a laptop.Keep your phone or other accessories within reach with the device channel.Some assembly required – simply attach the optional keyboard platform and you're ready to go.Weight capacity: 35 lbs..Full Dimensions: 4.5"-15.5"H x 31.5"W x 24.25"D Keyboard Dimensions: 31.3”W x 11.8”D.1-year manufacturer limited warranty.Stay active while you work with the Fellowes Corsivo Standing Desk Converter.
This manual height-adjustable frame is perfect for the office, schools, home, and most working environments. The easy-to-operate Mount-It! hand crank adjusts the desk height, giving you flexibility to sit or stand in seconds. The durable steel frame provides durability that is sure to withstand heavy and repeated use. Go above and beyond, and add an anti-fatigue floor mat or an under-desk CPU mount to your setup. Use this ergonomic sit-stand desk as a long-term investment for both your employees and your business. The tabletop is easily cleanable with a damp cloth..Burn more calories while you work, and improve your posture with this elegant and easy-to-use height-adjustable standing desk.Easy-to-use crank system adjusts the height of the desk from 30" from the ground up to 50".Comes with black steel legs and frame, featuring a white melamine tabletop.Dimensions: 30"-50"H x 55"W x 29.5"D; weight capacity: 132 lbs..Leg spacing can be adjusted from 44" to 64" to support most available tabletops.Excellent ergonomic desk solution for anyone who wants to work healthier on a budget.Tabletop is easily cleanable with a damp cloth.Supported by manufacturer's limited lifetime warranty
Our mobile desk cart features a tabletop (23.75 inches x 15.75 inches) with space for all your essentials – fitting most laptops or tablets. Easily roll the cart for your convenience and lock two of the wheels for even more stability. Create your personalized workspace by adjusting the height of the desk cart from 20.5 inches to 32 inches with the twist-lock manual knob and use as a couch desk or rolling side table. Seville Classics’ airLIFT Mobile Laptop Sitting Desk Cart is the perfect addition for any space for maximum versatility and efficiency..The height-adjustable sitting desk cart can be utilized in classrooms, medical offices, homes or business offices..Height adjustable from 20.5 inches to 32 inches..The desk has a solid walnut desktop with a matte black steel frame..Assembled Dimensions: 23.75 inches (W) x 15.75 inches (D) x 20.5 inches to 32 inches (H) and overall weight capacity of 15 lb..Equipped with four 1.5-inch caster wheels (2 locking).Requires assembly – tools required included..Limited 1-Year Manufacturer's Warranty.The desk has a clearance of 3 inches when rolling underneath furniture..Net Weight: 11 lbs..Mobilize your workstation and work productively anywhere you need with Seville Classics’ airLIFT Mobile Laptop Sitting Desk Cart.
Humanscale’s QuickStand Eco is the next generation in portable sit/stand desk solutions. Sleeker, easier to use and comprised of more sustainable materials than ever before, our adjustable standing desk solutions are a vast improvement over the current generation of sit/stand surfaces. The award-winning QuickStand Eco features simple setup, portability and near effortless adjustability — transforming ordinary desktops into healthy, active workspaces..Designed to accommodate users of varying heights with 18.6” of work surface adjustment..Alternating between sitting and standing throughout the day can boost productivity and mood, and reduce the negative effects of sedentary behavior. QuickStand Eco’s seamless operation allows you to quickly sit or stand when you choose..As we consider the impact of our products on people both during manufacturing and when they are in use, QuickStand Eco is built with sustainable, non-toxic materials and is the embodiment of Humanscale's design philosophy..Its minimal aesthetic blends into any environment, and its easy-to-use cable management helps hide cords and cables out of sight..There are no knobs or levers to adjust - Humanscale's Continuous Force self-locking mechanism keeps the equipment safe and stable while you work..Practical for home and corporate offices, this revolutionary product helps you bring ergonomic comfort and wellness right to your workspace.
Transform your conventional desk into a dynamic sit-stand workstation with this compact sit-stand desk converter with desktop from Mount-It!. Perfect for smaller spaces like office nooks, this converter brings versatility and innovation to your desk setup. The contemporary design with rounded edges ensures a high-quality aesthetic that seamlessly integrates into any office or home interior. Experience effortless height adjustments ranging from 5.9" to 16.9", thanks to the smooth gas spring mechanism, allowing you to find the perfect ergonomic position by pressing down the lever. The compact 30"W platform accommodates your monitor or laptop as well as office supplies, while the dedicated keyboard tray provides ample space for your keyboard and mouse. Start working in comfort and create a workspace tailored to your needs..Turn your traditional desk into an active sit-stand workstation with this compact sit-stand height-adjustable desk converter.Smooth gas spring mechanism allows for height adjustments between 5.9" and 16.9".Comes in a dark walnut woodgrain finish with an MDF desktop and a steel frame.Dimensions: 5.9"-16.9"H x 30"W x 25.75"D; top platform dimensions: 30" x 19.5"; keyboard platform dimensions: 30" x 11.8"; holds up to 33 lbs..Keyboard tray provides ample space for your keyboard and mouse.Meets or exceeds the ANSI and BIFMA standards.Assembly required.Compact size makes this converter perfect for smaller spaces such as office nooks.High-quality contemporary design with rounded edges fits perfectly into any office or home interior.30"W platform provides enough space for your monitor or laptop.Supported by Limited Lifetime warranty..Sit or Stand Comfortably, Even in Small Spaces
Introducing our height-adjustable laptop sit-stand desk, the ultimate solution for a versatile and ergonomic workstation on the go. With just a press of the foot pedal, our built-in pneumatic spring system effortlessly adjusts the desk's height between 29.6" and 44.2", catering to your comfort and productivity needs throughout the day. Boasting a spacious 23.6" x 20.5" desktop area, this desk provides ample space for your laptop, keyboard, and mouse, ensuring you have everything you need at your fingertips. Crafted with a smooth, heavy-duty, and moisture-resistant finish, our desk is both durable and stylish. Its compact design seamlessly fits into small spaces, making it ideal for any environment. Made from premium materials, our mobile desk cart is robust enough to hold up to 17.6lbs in weight. Plus, with smooth-rolling wheels, effortlessly move between different workspaces or rooms, perfect for shared work environments or dynamic setups. Whether you're sitting, standing, writing, drawing, or dining, our height-adjustable laptop desk offers unparalleled flexibility and convenience..The Mount-It! MI-7997 is a mobile, height-adjustable laptop desk with a rectangular shape; no additional furniture pieces are included..It features a contemporary design with a black, moisture-resistant desktop surface and a durable steel frame..The desktop measures 23.6 inches wide by 20.5 inches deep, and the height adjusts from 29.6 to 44.2 inches. The desk supports up to 17.6 pounds of total weight..Effortlessly move between different workspaces or rooms with smooth-rolling wheels, ideal for shared work environments or dynamic work setups.Seamlessly transition between sitting and standing using the convenient foot pedal to promote movement throughout the day.Compact design fits seamlessly into small spaces while the spacious desktop provides ample space for your laptop, keyboard and mouse.Whether you're sitting, standing, writing, drawing, or dining, our height-adjustable laptop desk offers unparalleled flexibility and convenience..Supported by Manufacturer's Limited Lifetime Warranty..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..From couch to corner office, the Mount-It! MI-7997 makes it easy to sit, stand, and stay productive, wherever your day takes you.
This manual height-adjustable frame is perfect for the office, schools, home, and most working environments. The easy-to-operate Mount-It! hand crank adjusts the desk height, giving you flexibility to sit or stand in seconds. The durable steel frame provides durability that is sure to withstand heavy and repeated use. Go above and beyond, and add an anti-fatigue floor mat or an under-desk CPU mount to your setup. Use this ergonomic sit-stand desk as a long-term investment for both your employees and your business. The tabletop is easily cleanable with a damp cloth..Burn more calories while you work, and improve your posture with this elegant and easy-to-use height-adjustable standing desk.Easy-to-use crank system adjusts the height of the desk from 30" from the ground up to 50".Comes with black steel legs and frame, featuring a brown melamine tabletop.Dimensions: 30"-50"H x 55"W x 29.5"D; weight capacity: 132 lbs..Leg spacing can be adjusted from 44" to 64" to support most available tabletops.Excellent ergonomic desk solution for anyone who wants to work healthier on a budget.Tabletop is easily cleanable with a damp cloth.Supported by manufacturer's limited lifetime warranty