Molded Polypropylene Chairs

Flash Furniture HERCULES Series folding chair of sold as 120 per pack has double rails for adding extra strength. Steel frame with black powder finish suits perfectly for all events. Easy to handle & stack & comes with floor caps to reduce noise..Black plastic.Armless.Dimensions: 31.5"H x 17.5"W x 18"D.Textured polypropylene seat and back.Seat size: 15.5"W x 15.5"D, back size: 15.5"H x 17.5"W.Weight capacity: 650 lbs..Fully assembled.Black powder coated frame finish.Lightweight for easy handling.Double support rails.Contoured back and seat.Non-marring floor caps.Easily nests for stacking, designed for indoor and outdoor use.For Use with 201184 Dolly.Meets or exceeds all ANSI/BIFMA standards.Warranty: 2 years parts only.No Assembly Required.Designed For Commercial Use.Flash Furniture HERCULES Series 650 lbs capacity premium black plastic folding chair allows drying in all weather conditions, sold as 120/pack features open back and contoured seat has drain holes for air circulation.

Students sit most of the day, provide comfortable seating in your classroom or training room with these popular ergonomic plastic stack chairs. These student stack chairs are favorable in classrooms due to their ergonomic seat shell and lightweight design to move easily around the classroom. The ergonomic comfort-formed shell has a waterfall edge to reduce leg pressure and an air-vented lower back. Plastic chairs are easy to clean for high traffic environments. Spills in the seat drain through the drain holes to prevent water pooling. These stackable school chairs may be used outdoors for school events, protect the chairs from wet weather. We consider this student stack chair to be the premier stack chair - essential for every school and classroom setting. After parent-teacher conferences or school events these chairs stack neatly up to 20 high and can be transported on our steel stack chair dolly..Plastic Stack Chairs.Color: Orange; Material: Metal, Plastic, Polypropylene.Ergonomic Design - Contoured Shell Seat and Back.Overall Dimensions: 19.25"W x 23.5"D x 32"H.Seat Dimensions: 17.75"H x 17.75"W x 15.5"D.Back Dimensions: 17"W x 15"H.Rated for up to 880 lbs. Based on 6-8 Hours Use.Care Instructions: SW-Solvent and water based cleaner such as foam.Fully Assembled.Meets or Exceeds ANSI/BIFMA Standards; Rated for Commercial Use.3 Years Limited Warranty.Set of 5 Multipurpose Stack Chairs.880 lb. Weight Capacity.Stack Quantity: 20.Ergonomically Contoured Design with Orange Plastic Back and Seat.Vented Back and Seat Drain Holes assist in drying.Double Support Braces.Gray Powder Coated Frame Finish with Plastic Floor Glides.Designed for Commercial Use.Ships Fully Assembled.Widely used and popular plastic stack chairs will satisfy your everyday or temporary seating needs in any commercial establishment or in the home.

Flash Furniture HERCULES™ Series folding chair sold as 20 per pack is constructed with white resin molded and UV stabilized polypropylene material for long life span. Chair is lightweight in design and can be folded flat to reduce storage space..White Resin.Armless.Dimensions: 30 3/4''H x 17 1/2''W x 18''D.Seat Size: 18 1/2''H x 15 1/2''W x 13 3/4''D; Back Size: 15''H x 17 1/2''W.Weight Capacity: 1000 lbs..Lightweight Design.White Vinyl Padded Upholstered Seat.Waterproof Detachable Seat.Anti-Static.Aluminum Hardware.Designed for Indoor and Outdoor Use.CA117 Fire Retardant Foam.Meets or exceeds all ANSI/BIFMA standards.Warranty: 2 years parts only.No Assembly Required.Designed For Commercial Use.Injection molded with UV stabilized waterproof detachable seat.Weight capacity: 1000 lbs..Fully assembled.Lightweight design.Anti-static.Waterproof detachable seat.Easily stored, folds flat at 2 3/4".Designed for indoor and outdoor use.CA117 fire retardant foam.Flash Furniture HERCULES™ Series white resin folding chair is ideal for general usage which gives comfortable seating is sold as 20/pack and has detachable waterproof white vinyl padded seat which withstands 1000 lbs capacity.

Global Sonic Series Stacking arm chair measuring 32" x 20 1/2" x 21 3/4" has straight leg base and chrome metal plated frame. Stacking arm chair offers comfort and strength for the people who sit on it..Stacking chair with arms.Black, Polypropylene.32"H x 20 1/2"W x 21 3/4"D.Seat: 17"W x 16"D.Back: 17"W x 15"H.2/Carton.Chrome frame with black plastic back and seat.A clean, cosmopolitan look to any cafeteria, reception room or informal meeting area.Contains a minimum of 60% recycled content.Mfr. limited lifetime warranty.Global Sonic Series Stacking arm chair in black color has molded polypropylene seat/back for ease cleaning and durability.

Strong as an elephant and quiet as a mouse! The gorgeous 6600 Series Elephant Z-Stool with Backrest is the zenith of ergonomic design and stylish comfort, perfect for hands-on settings like art studios or science labs. The mammoth, chrome-plated, 14-gauge, eye-shaped tubular steel frame is available in three separate height options. Footrest has a smooth-textured surface for traction and rear brace for extra stability. Each stool features a black, lightweight, blow-molded, polypropylene seat and ventilated fan-backed backrest, contoured to fit the user. Sturdy, U-shaped, sled-base legs distribute weight across a wider surface, minimizing pressure on floors. The glides are securely bonded with thermoplastic polyurethane (TPU) and move softly over any surface. Z-Stools are conveniently stackable (three units high) or hang with ease from tabletop surfaces, allowing for simple clean-up and storage..Black stool ideal for labs, art rooms and as a task stool.Black blow-molded plastic seat supported by mighty 14 gauge steel frame.Sturdy, U-shaped, sled-base legs distribute weight across a wider surface, minimizing pressure on floors.16.75"W x 16.25"D x 35"H.Nests On Tabletops For Easy Cleanup And Storage.Backrest: 19"W x 1"D x 9"H.Armless.Built-in foot ring.Weight Limit: 300 lb's.Base stool comes assembled, backrest installation requires minimal effort.Meets or exceeds ANSI/BIFMA standards.10 Year Manufacturer Warranty.Foot Rests Made Of 17-Gauge Chrome Eye-Shaped Tubular Steel.Ventilated fan-backed backrest, contoured to fit the user.Footrest has a smooth-textured surface for traction and rear brace for extra stability

Strong as an elephant and quiet as a mouse! The gorgeous 6600 Series Elephant Z-Stool is the zenith of ergonomic design and stylish comfort, perfect for hands-on settings like art studios or science labs. The mammoth, chrome-plated, 12-gauge, oval tubular steel frame is available in three separate height options. Each stool features a black, lightweight, blow-molded, polypropylene seat, contoured to fit the user. Sturdy, U-shaped, sled-base legs distribute weight across a wider surface, minimizing pressure on floors. The glides are securely bonded with thermoplastic polyurethane (TPU) and move softly and smoothly over any surface. Z-Stools are conveniently stackable (six units high) or hang with ease from tabletop surfaces, allowing for simple clean-up and storage..Black stool ideal for labs, art rooms and as a task stool.Black blow-molded plastic seat supported by mighty 14 gauge steel frame.Sturdy, U-shaped, sled-base legs distribute weight across a wider surface, minimizing pressure on floors.16.75"W x 16.25"D x 18"H.Nests On Tabletops For Easy Cleanup And Storage.Footrest has a smooth-textured surface for traction and rear brace for extra stability.Armless.Built-in foot ring.Weight Limit: 300 lb's.Base stool comes assembled, backrest installation requires minimal effort.Meets or exceeds furniture industry (ANSI/BIFMA) standards.10 Year Manufacturer Warranty.Foot Rests Made Of 17-Gauge Chrome Eye-Shaped Tubular Steel.The NPS 6600 Series Black Elephant Z-Stool 18"H Blow Molded Heavy Duty Chrome Plated Steel Stool (66183) features an ergonomic blow-molded seat that ensures aerated comfort while seated.

The HON Motivate office stacking chair transforms any space into a dynamic environment. This set of two four-leg stacking chairs was sculpted for incredible comfort. The chairs stack up to six high on the floor..Flexible, multiuse stacking office chair.Shell is made of plastic in Regatta blue color, the base comes in a platinum finish.Dynamic flex-zone seat and back motion provide all-day comfort for extended meetings and computer work.Overall dimensions: 32.25"H x 21"W x 23"D.Seat dimensions: 18"H x 18"W x 18"D.Back dimensions: 18"W x 18"D.Supports up to 300 lbs..Comes fully assembled.Meets or exceeds the ANSI/BIFMA and ISTA Performance standards.Molded shell features reinforced resin for flexibility and strength to withstand heavy use and frequent handling.Seating platform evolved from extensive ergonomic research to dramatically reduce pressure points.Perfect for collaborative settings where people need to transition within or between work areas.Curvilinear design matches tables from the same collection and complements other table and desk styles.Designed for multi-user environments where the use of space is constantly changing.Chairs stack up to six high on the floor; not designed to be stacked on cart.Premium base provides both style and durability.Lifetime manufacturer limited warranty.Model Option: HMG1.N.S.RE.PLAT

Furnish your classroom, training room and adult education facilities with seating designed for comfort during educational courses and workshops. With an open-back for airflow this classic student stack chair will keep students comfortable to focus on the educator. The classroom oriented student stack school chair features a heavy-duty navy seat shell made of superior high-density polypropylene, ergonomically shaped for maximum student seating comfort and 18-gauge bright nickel, chrome plated frame. The seat shell is designed to promote student seating comfort and correct seating posture for enhanced learning. Non-exposed rivets hold the school chair shell to the strong, non-corrosive steel frame while nylon tip glides on each leg help protect delicate floor surfaces. This ergonomic stack chair provides a stylish and durable classroom seating solution. The chair stacks up to 12 chairs high to provide ease of cleaning and maximum storage within the classroom. This well constructed, stackable school chair provides an unparalleled level of durability and value to exceed your classroom seating needs..Plastic Stacking School Chair.Color: Navy; Material: Plastic, Steel.Ergonomic Shaping.Overall Dimensions: 20"W x 19"D x 30.5"H.Seat Dimensions: 18"H x 15.5"W x 14"D.Back Dimensions: 15"W x 14"H.Rated for up to 225 lbs Based on 6-8 Hours Use.Fully Assembled.ANSI/BIFMA and SGS.Warranty: 3 Years Limited.Space-saving Stackable Classroom Chair.Stack Quantity: 12.High-density Polypropylene Seat Shell with UV, heat and cold protection.18 Gauge Steel Frame.Bright Nickel, non-corrosive chrome plated frame finish.Nylon tipped, Self-Leveling Glides protect delicate surfaces.Designed for Middle School, High School and Adult Students.Meets all ANSI/BIFMA and SGS structural test requirements for student stack chairs.BIFMA Approved for Toxic Emissions.Widely used and popular plastic stack chairs will satisfy your everyday or temporary seating needs in any commercial establishment or in the home.

Today's learning environments are designed to be kinetic and multipurpose, and HON SmartLink allows collaboration and inspiration to happen naturally. This 18" HON SmartLink four-leg chair supports students with a comfortable one-piece seat and back, which are contoured to the body's natural curves. The high-strength tubular steel frame adds rigidity and durability to guarantee years of confident use. The armless design stacks up to five high on the floor to maximize space, and the casters move effortlessly on hard surfaces..Four-leg chair designed to make learning environment kinetic and multipurpose.Made with an injection-molded plastic shell in an onyx finish and a high-strength tubular steel frame with a platinum-tone metallic texture.Comes with a comfortable one-piece seat and back, which are contoured to the body's natural curves.Overall dimensions: 31"H x 19.5"W x 19.63"D.Seat dimensions: 18"H x 16.5"W x 16.25"D.Back dimensions: 15.38"W x 13.38"D.Armless design is easy to fit under any desk.Ships four chairs per carton.Fully assembled.Stacks up to five high on the floor to maximize space.Model Option: HSS4L-18B.E.ON.PLAT

Bring excellent, reliable seating to any modern dining area, waiting room, or office with this black plastic stacking chair. Highlighted with a diamond quilted pattern, this chair offers plenty of style. It's perfect for use as an accent side chair in waiting areas, cafes, lounges, and casual restaurants. This chair boasts a waterfall seat to help reduce leg strain and provide superior comfort for your guests during their stay. No place is off limits as this quilted plastic stack chair will hold up in a classroom, conference room, restaurant dining room or around the home..Stack Chairs.Color: Black; Material: Chrome, Plastic.Overall Dimensions: 17"W x 20"D x 31"H.Seat Dimensions: 18"H x 17"W x 14.5"D.Back Dimensions: 16.5"W x 14.5"H.Armless.Weight Capacity: 265 lbs; Recommended Usage: 6-8 Hours.Assembly Required.Rated for Commercial Use.5 Year Limited (non moving metal parts) 2 yr Parts.Multipurpose Stack Chair.Stack Quantity: 5.Black Plastic Finish.Ripple Diamond Patterned Back and Seat.Ergonomically Contoured Design.Polypropylene Molded Structure.Waterfall Seat reduces pressure on your legs.Chrome Frame Finish.Widely used and popular plastic stack chairs will satisfy your everyday or temporary seating needs in any commercial establishment or in the home.

On-the-go learning is what it is all about with the National Public Seating CoGo mobile tablet chair. Ergonomically designed fiberglass-reinforced polypropylene seat with waterfall edge offers the perfect flex-stretch solution for an intensive day of study. The seat swivels, allowing students to shift focus throughout the room. The 16-gauge steel pyramid frame creates strong, lasting support. The smooth, extra-wide 19.5"W x 13.75"D poly reinforced tablet arm includes a deep slot to securely hold computer tablets. The tablet arm can be installed for either right- or left-hand students and boasts a 150 lb. weight capacity. Double-wheel castors provide 44 lbs. of total weight capacity. The wide storage base conveniently stores bags and books. So CoGo your way to the 21st century collaborative learning..Ergonomically designed seat with waterfall edge offers the perfect flex-stretch solution for an intensive day of study.Blue seat is made of fiberglass-reinforced polypropylene; the tablet is made of poly reinforced with a 16-gauge steel frame and comes in gray.Dimensions: 34"H x 24.75"W x 32.5"D.Contains a 16.75"W x 16.75"D under-seat storage.Meets or exceeds MAS Certified Green standard.Assembly required.Tablet arm can be installed on either right or left side.Features strong 2" dual-wheel casters.Each caster has a 110 lb. weight capacity for a total of 440 lbs..Tablet has a 150 lb. weight capacity.Steel washer plates are welded onto the frame, and a steel tab is welded onto the arm, providing firm support and preventing the arm from sagging.10-year manufacturer limited warranty

On-the-go learning is what it is all about with the National Public Seating CoGo mobile tablet chair. Ergonomically designed fiberglass-reinforced polypropylene seat with waterfall edge offers the perfect flex-stretch solution for an intensive day of study. The seat swivels, allowing students to shift focus throughout the room. The 16-gauge steel pyramid frame creates strong, lasting support. The smooth, extra-wide 19.5"W x 13.75"D poly reinforced tablet arm includes a deep slot to securely hold computer tablets. The tablet arm can be installed for either right- or left-hand students and boasts a 150 lb. weight capacity. Double-wheel castors provide 44 lbs. of total weight capacity. The wide storage base conveniently stores bags and books. So CoGo your way to the 21st century collaborative learning..Ergonomically designed seat with waterfall edge offers the perfect flex-stretch solution for an intensive day of study.Red seat is made of fiberglass-reinforced polypropylene; the tablet is made of poly reinforced with a 16-gauge steel frame and comes in gray.Dimensions: 34"H x 24.75"W x 32.5"D.Contains a 16.75"W x 16.75"D under-seat storage.Meets or exceeds MAS Certified Green standard.Assembly required.Tablet arm can be installed on either right or left side.Features strong 2" dual-wheel casters.Each caster has a 110 lb. weight capacity for a total of 440 lbs..Tablet has a 150 lb. weight capacity.Steel washer plates are welded onto the frame, and a steel tab is welded onto the arm, providing firm support and preventing the arm from sagging.10-year manufacturer limited warranty

Playing a musical instrument places both mental and physical demands on the musician. This specialty designed Melody Band Chair will give your musicians seating that is specifically designed with their needs in mind. This innovative flared-legged music chair is not only stylish but extremely affordable! Students are certain to enjoy the comfort of an ergonomically-designed music chair. The music chair is designed with band-pitch style and features a seat-to-back angle of 97 degrees to allow for maximum comfort associated with breathing capability. The chair's back legs are positioned at the proper angle to provide choral or band pitch. The polypropylene seat and back are contoured for extra comfort, while the rear seat brace provides added support. For easy storage and quick set up and take down, this chair can be stacked up to 18 high. This chair is ideal for 7th graders to college students..Music Stack Chairs.Color: Black; Material: Metal, Plastic, Polypropylene.Overall Dimensions: 19.25"W x 23"D x 33.75"H.Seat Dimensions: 17.5"H x 16.75"W x 16"D.Back Dimensions: 15"W x 17.5"H.Rated for up to 250 lbs. Based on 6-8 Hours Use.Care Instructions: S-Solvent based cleaner - no water.Fully Assembled.Meets or Exceeds ANSI/BIFMA Standards; Rated for Commercial Use.Warranty: 3 Years Limited.High Density Band/Music Chair.Stack Quantity: 18.Black Plastic Back and Seat, Easy to Clean.Ergonomically Contoured Design.Textured Seat ensures safe seating.97 degree Seat-to-Back Angle allows maximum breathing capability.Black Powder Coated Frame Finish, Floor Protector Plastic Glides.Recommended for 7th Grade to College Students.Made In Taiwan.TAA Compliant.Provide your music students with specially designed chairs for playing instruments and singing.

On-the-go learning is what it is all about with the National Public Seating CoGo mobile tablet chair. Ergonomically designed fiberglass-reinforced polypropylene seat with waterfall edge offers the perfect flex-stretch solution for an intensive day of study. The seat swivels, allowing students to shift focus throughout the room. The 16-gauge steel pyramid frame creates strong, lasting support. The smooth, extra-wide 19.5"W x 13.75"D poly reinforced tablet arm includes a deep slot to securely hold computer tablets. The tablet arm can be installed for either right- or left-hand students and boasts a 150 lb. weight capacity. Double-wheel castors provide 44 lbs. of total weight capacity. The wide storage base conveniently stores bags and books. So CoGo your way to the 21st century collaborative learning..Ergonomically designed seat with waterfall edge offers the perfect flex-stretch solution for an intensive day of study.Black seat is made of fiberglass-reinforced polypropylene; the tablet is made of poly reinforced with a 16-gauge steel frame and comes in gray.Dimensions: 34"H x 24.75"W x 32.5"D.Contains a 16.75"W x 16.75"D under-seat storage.Meets or exceeds MAS Certified Green standard.Assembly required.Tablet arm can be installed on either right or left side.Features strong 2" dual-wheel casters.Each caster has a 110 lb. weight capacity for a total of 440 lbs..Tablet has a 150 lb. weight capacity.Steel washer plates are welded onto the frame, and a steel tab is welded onto the arm, providing firm support and preventing the arm from sagging.10-year manufacturer limited warranty