Power Over Ethernet Extenders

This StarTech POEEXT1GAT Gigabit PoE+ extender features compact, wall-mountable and rugged metal housing that offers better performance in harsh environments. The extender is equipped with plug-and-play technology, so you won't need to install software or run programs to get it up and running. It is perfect for Wi-Fi access points, IP phones, surveillance cameras and kiosks where a power connection is not available. This extender automatically detects your connected PD to prevent damage if incorrectly installed..Network extender is perfect for Wi-Fi® access points, IP phones, surveillance cameras, and kiosks where a power connection is not available.Dimensions: 1"H x 2.7"W x 3.7"D, Cable length: 328'.Black with steel for durability and corrosion resistance.2-x RJ-45 female interfaces/ports.PoE IN, LNK/ACT, PoE OUT LED indicators offer easy monitoring.Power supply: 52 - 56 VDC (input), Power consumption: 3.2 W max, Power source: PoE-powered.Environmental conditions: 0 - 50 deg C (operating), -10 - 85 deg C (storage), Humidity - 5 - 95% RH.Compatible networks: 10/100/1000 Mbps, Flow control: Half-duplex back-pressure, IEEE 802.3x pause frame for full duplex.Data transfer rate: 2 Gbps (full duplex).Surge protection: EN61000-4-2 (ESD) - 2 kV, EN61000-4-5 (surge) - 2 kV, Switching architecture: Store-and-forward.Auto MDIX, auto-negotiation, full duplex support for better performance.Includes gigabit power over Ethernet extender, instruction manual.Meets IEEE 802.3af PoE, IEEE 802.3at PoE+, EEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T certification and standards.Weight: 6.6 oz..Comes with 2 years warranty.The StarTech Gigabit PoE+ extender extends your PoE PDs over longer distances by daisy-chaining four extenders up to 500m.

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.)..Input Ports: 1 10/100Base-T.Output Ports: 1 10/100Base-T.Weight (Approximate): 1.59 oz

Axis Communications® 5026-401 T8640 POE+ Ethernet over coax adapter enables IP communication over existing Coax video cabling. Converts an analog system to digital and offers standard PoE and centrally sourced power without any new cables. Comes with diagnostics LEDs for power and link status in both base and device unit..Suitable for installation of network cameras.Measures 4.1" x 2.2" x 0.9".Provides BNC 75 ohm coaxial connection and has shielded ethernet RJ-45, EIA 568A or 568B for convenience.Has 100Base-TX full duplex Ethernet cable and offers 100 + 100 Mbps symmetrical to full range coaxial cable data rate.100Base-TX Full duplex coaxial type Ethernet cable delivers 100+100Mbps symmetrical to full range data rate.PoE AXIS T8642 enabled to detect devices up to 25.5 W power.Has network indicators, power indicators, plug-and-play installation, wall/rack/din rail mounting and detects PoE automatically.Operates at 14 - 122 deg F temperature and has storage temperature of -40 to 165 deg F.Meets IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15 and Class B with FTP cabling standards.Certifications and standards: IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15, Class B with FTP cabling, EN 55022 Class B, (Emissions, PoE powered), EN 55022 Class A (Emissions, DC powered), EN 55024 (Immunity).Weight: 0.3 lbs..Axis Communications® T8640 POE+ Ethernet over coax adapter is perfect for installation of network cameras. Full network connection is delivered and features durable construction.

AXIS 5025-281 PoE Extender.Security accessories type: Network extender.Compatibility: M11 series, M30 series, M31 series, M31-VE series, M32 series, P33 (indoor models).Dimensions: 4.1"(H) x 1.6"(W) x 0.9"(D).Connectors: Shielded RJ-45, EIA 568A and 568B.Enclosure type: External.Cabling type: 10Base-T, 100Base-TX.Weight: 1.59 oz.Data transfer rate: 100 MBps.1 Year limited warranty.AXIS® PoE Extender is designed for M11 series, M30 series, M31 series, M31-VE series and M32 series.

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

PoE+ Industrial Fiber to Ethernet Media Converter 60W - SFP to RJ45 - Singlemode/Multimode Fiber to Copper Gigabit Ethernet - Compact Size - IP-30/ -40 to +75C (IMC1GSFP60W).EXTEND, CONVERT, POWER: Fiber to Ethernet media converter with PoE extends & converts fiber to RJ-45 copper; Provides up to 60W of PSE power to PoE/PoE+/PoE++ PD devices like cameras and sensors.FLEXIBLE POWER: Can be hardwired using terminal block (48-56VDC) power or powered using a standard Type-N barrel wall adapter (not included).OPEN SFP SLOT: Any MSA compliant SFP can be used for the incoming multimode or singlemode fiber connection; easy deployment across applications or fiber cable types.ROBUST DESIGN: Industrial Gigabit Media Converter w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.Industrial PoE Media Converter | 10/100/1000 Mbps | 60 Watts | Open SFP | DIN Rail Mountable

This media converter by Tripp Lite converts a single-mode or multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks, and access control devices..Customizable media converter extends power and data to a PoE+ device via fiber cable.Dimensions: 0.98"H x 3.74"W x 2.76"D.Network compatibility: 10/100/1000 Mbps Gigabit Ethernet network.Features a compact black metal housing.PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device.Supports auto-sensing of network speed and other advanced functions, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration.Supports both full- and half-duplex operation.Customizable SFP port supports both 1G single- and multimode transceivers.RJ45 jack supports auto MDI/MDI-X to bridge various network devices.Six LEDs indicate the converter's power, PoE, Ethernet network, and fiber link statuses at a glance.Completely plug-and-play with no additional software required for connection.The included power supply connects to a convenient AC outlet with no computer or other signal source needed.Works in tandem with Tripp Lite N785-Series non-PoE converters (sold separately).Pack includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60 Hz, 1.5A; output: 48V 1.25A), and owner's manual.Meets or exceeds FCC and RoHS standards.2-year manufacturer limited warranty

Connect two Cat 6a cables to extend a network connection, using this Shielded RJ45 Inline Coupler. The female to female Ethernet coupler maintains optimal signal integrity while achieving low insertion loss that exceeds industry standards. Wide Compatibility The Cat6a Coupler supports up to 10Gbps and is compatible with common networking standards including 10/100/1000BASE-T, and advanced protocols such as 2.5GBASE-T/5GBASE-T. The Shielded Inline RJ45 coupler facilitates Power-over-Ethernet (PoE) to power network peripheral devices..Inline Cat-6a Coupler, Ethernet Cable Extension, 10 Gbps.Maximum Data Transfer Rate 10000 Mbps.Number of Ports 2.Compatible with Cat 6/6a and Cat 5/5e cables.Features Shielded, Passive, Corrosion Resistance, Wear Resistant, Plug and Play, PoE, EMI Protection.Product Material ABS, Metal, Contact Material Phosphor Bronze.Limited Warranty Lifetime

Power up your network with the StarTech 4-Port Gigabit PoE+ Midspan Injector. Designed to deliver both data and power over a single Ethernet cable, this compact hub supports up to four PoE-enabled devices with speeds up to 1000Mbps and power output of up to 30.8W per port. Ideal for IP cameras, access points, and VoIP phones, it features auto-sensing technology for seamless compatibility and plug-and-play setup—no software required. Wall-mountable and TAA compliant, it’s perfect for professional installations where space and power access are limited. Integrated circuit protection ensures safe operation, while LED indicators provide real-time status at a glance..Functions as a PoE+ injector.Supports Gigabit Ethernet with data transfer rates up to 2 Gbps..Operates over wired Ethernet.Connects using standard RJ-45 Ethernet ports for seamless integration..Features four LAN ports for powering and networking multiple PoE devices..Designed for desktop or wall-mount installation in compact environments..2-year manufacturer warranty for parts and labor.