Wired LAN Port Switch

The Cisco Catalyst 9500 series switches are the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability. Based on an x86 CPU, the Cisco Catalyst 9500 series is Cisco's lead purpose-built fixed core and aggregation enterprise switching platform, built for security, IoT, and cloud. The switches come with a 4-core x86, 2.4-GHz CPU, 16-GB DDR4 memory, and 16-GB internal storage. The Cisco Catalyst 9500 series is the industry's first purpose-built 25, 40 and 100 Gigabit Ethernet line of switches targeted for the enterprise campus. These switches deliver unmatched table scale (MAC/route/ACL) and buffering for enterprise applications. The Cisco Catalyst 9500 series includes nonblocking 40 and 100 Gigabit Ethernet Quad Small Form-Factor Pluggable (QSFP+, QSFP28) and 1, 10 and 25 Gigabit Ethernet Small Form-Factor Pluggable Plus (SFP/SFP+/SFP28) switches with granular port densities that fit diverse campus needs. The switches support advanced routing and infrastructure services (such as Multiprotocol Label Switching (MPLS) Layer 2 and Layer 3 VPNs, Multicast VPN (MVPN), and Network Address Translation (NAT); Cisco Software-Defined Access capabilities (such as a host tracking database, cross-domain connectivity, and VPN Routing and Forwarding (VRF)-aware Locator/ID Separation Protocol (LISP); and network system virtualization with Cisco StackWise virtual technology that are critical for their placement in the campus core. The Cisco Catalyst 9500 Series also supports foundational high-availability capabilities such as patching, Cisco Nonstop Forwarding with Stateful Switchover (NSF/SSO), redundant platinum-rated power supplies, and fans..Rack-mountable switch is the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability.Contains 16-port 1/10 Gigabit Ethernet switch with SFP/SFP+.Programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks, so they can focus instead on innovation that positively transforms your business.Up to 6.4Tbps switching capacity with up to 2Bpps of forwarding performance.Dimensions: 1.73"H x 21.52"W x 17.5"D.Features 16GB DRAM, 16GB flash memory, quad-core x86, 2.4GHz CPU.Up to 512000 Flexible NetFlow (FNF) entries in hardware.Up to 212000 routing entries (IPv4/IPv6) for high-end campus core and aggregation deployments.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.IEEE 802.1ba AV Bridging (AVB) built-in to provide a better AV experience through improved time synchronization and QoS.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Support for both static and dynamic NAT and Port Address Translation (PAT).Scalable routing (IPv4, IPv6, and multicast) tables and Layer 2 tables.Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models.Meets or exceeds UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943 standards.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 10Gbps SFP+ ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.132Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 960W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 1Gbps SFP ports engineered for 1Gb AV over IP.24 PoE++ ports (90W/port) provide a total of 1440W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The 5-Port Gigabit Ethernet Switch from Intellinet Network Solutions® is ideal for home offices and small-size businesses looking for a durable switch that is reliable and easy to install. Small and powerful, this Gigabit Switch is easy to install and connects up to 5 computers, servers, printers, switches, or any other Ethernet devices at 10, 100 or 1000 Mbps over Ethernet cables, and it works with any operating system. The auto features of this switch make installation plug and play and hassle-free. Plus, it has Green Ethernet technology, allowing it to monitor power usage and turn off unused ports to save electricity..Compact switch with 5 Gigabit ports to expand your network in an instant.Easy plug-and-play installation - simply power it up and start using it.Green Ethernet power-saving technology deactivates unused ports.Five 10/100/1000 auto-sensing ports automatically detect optimal network speeds.Supports any combination of 10-Mbps, 100-Mbps, or 1-Gbps network devices.Switch fabric of 10 Gbps.Supports 2k MAC address entries with Auto-Learning and Auto-Aging.Buffer memory of 1.5 MBytes.Supports jumbo frames up to 16 KBytes.Ultra-compact design.Fanless design is ideal for silent operation.Store and forward switching architecture.Fully NDAA-compliant.3-year warranty.Includes power adapter and quick instruction guide

The Axis Communications® T8516 managed PoE+ network switch is an easy to use 16 channel managed Ethernet switch that is optimized for surveillance solutions. The switch has web graphic user interface that provides a graphical overview of all connected devices in the system. This allows you to manage connected devices, reboot cameras in the system, cable diagnostics and to monitor the network traffic..PoE+ network switch is perfect for efficient network management.Number of ports: 18.Security: Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, ACL, Private VLANs, DHCP snooping.Dimensions: 1.73"H x 17.4"W x 8.31"D.Input power: 100 - 240 VAC, 50/60 Hz, Max 285 W, output power: PoE - IEEE 802.3af/at Type 2 Class 4, Max power budget - 240 W.Meets CE, EAC, SASO, EN 55032 Class A, EN 55024, FCC Part 15 Subpart B Class A, ICES-003 Class A, RCM, VCCI Class A, KCC, ANATEL, JATE standards.Network function: DHCP and NTP server included, VLAN.Jumbo frames: 9216 bytes.MAC table: 8 K.Throughput: 26.8 Mpps, switching capacity: 36 Gbps.Supported protocols: IPv4, IPv6, HTTP, HTTPS, QoS, Bonjour, UPnP, SNMP v1/v2c/v3, DNS, NTP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SSH, STP, RSTP, MSTP.Connectors PoE ports: RJ45 10BASE-T/100BASE-TX/1000BASE-T (port 1 - 16), combination ports: RJ45/SFP 100BASE-TX/1000BASE-T (port 17 - 18).Form factor: Desktop or rack-mountable.Includes installation guide, power cord, 19" ear rack kit, rubber feet (4x), SFP dust cover (2x).Weight: 6.1 lbs..Comes with 3 year warranty

The Tenda TEG1024D is a high-performance, 24-port Gigabit Ethernet unmanaged switch designed for reliable and efficient network expansion in small to medium-sized businesses, schools, and community networks. With its plug-and-play functionality, the switch requires no complex configuration, making it an ideal choice for users seeking simplicity and performance. Each of its 24 auto-negotiation RJ45 ports supports speeds of 10/100/1000 Mbps, with full-duplex mode enabling data transfer rates of up to 2000 Mbps per port. The TEG1024D features a robust switching capacity of 48 Gbps and a packet forwarding rate of 35.7 Mpps, ensuring seamless data transmission even in high-traffic environments. Housed in a durable metal casing, this fanless switch operates silently and offers flexible installation options, including desktop, wall, and rack mounting. Energy-saving technology reduces power consumption during low traffic periods, contributing to cost efficiency. With compliance to IEEE 802.3 standards and certifications like CE, FCC, and RoHS, the TEG1024D guarantees compatibility and safety. Whether for office networking, educational facilities, or community setups, the Tenda TEG1024D provides a cost-effective and reliable solution for high-speed wired connectivity..The Tenda TEG1024D features 24 auto-negotiation 10/100/1000 Mbps Ethernet ports, offering Gigabit Ethernet performance, and is classified as an unmanaged switch, providing plug-and-play functionality without the need for configuration..Supports a data transfer rate of up to 1 Gbps per port in full-duplex mode, allowing up to 2000 Mbps data transmission per port..Comes in a compact metal housing and supports desktop, wall, and rack-mountable installation options, providing flexibility for various deployment scenarios..The TEG1024D is a wired-only switch..The switch operates in store-and-forward mode, ensuring reliable data transfer. It has a switching capacity of 48 Gbps and a forwarding rate of 35.7 Mpps, enabling efficient throughput for high-traffic environments..Has a maximum power consumption of less than 12W and includes energy-saving features that reduce power consumption during periods of low network activity..Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x standards. It also meets CE, FCC, and RoHS certifications, ensuring compatibility and safety in various operating environments.

23536d54ffebbb303c45b74406501462.Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

This TP-LINK JetStream enterprise switch with 8 x gigabit PoE+ ports and 2 x gigabit SFP slots provides non-blocking switching performance and ultralow latency, so reliable and lightning-fast connections to server and other switches are easily built. Security features include IP-MAC-Port-VID binding, port security, storm control, and DHCP snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the access control lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users' network access can be controlled via 802.1x authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided..8 x gigabit (RJ45) ports of this managed switch offer high-speed and reliable connections to other switches and devices.Contains 8 x 802.3at/af compliant PoE+ ports with a total power supply of 150W.Provides up to 20Gbps of switching capacity.Rack-mountable and features a fanless design.Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more; with QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply.Cloud access and the Omada app for enhanced convenience and easy management.Maximum power consumption: 23.6W (110V/60Hz).8 x Gigabit PoE+ ports and 2 x Gigabit SFP slots provide high-speed connections.Helps route internal traffic for more efficient use of network resources.Features robust security strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.Stand-alone management: web, CLI (console port, Telnet, SSH), SNMP, RMON, and dual image bring powerful management capabilities.sFlow, QinQ, L2PT PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind.802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links.IPv6 functions such as dual IPv4/IPv6 stack, MLD snooping, IPv6 ACL, DHCPv6 snooping, IPv6 interface, path maximum transmission unit (PMTU) discovery, and IPv6 neighbor discovery guarantee your network is ready for the next-generation network (NGN) without upgrading your hardware.Lifetime manufacturer limited warranty

Expand your network with the Ubiquiti eight-port layer 2 PoE switch supporting silent fanless cooling. Features four GbE, PoE+ RJ45 ports and four GbE RJ45 ports. Managed with the UniFi Network application: version 7.2.94 and late..Compact eight-port layer 2 PoE switch supporting silent fanless cooling.Features 4 x RJ45 (GbE, PoE+) ports and 4 x RJ45 (GbE) ports.Total non-blocking line rate: 8Gbps.Max power consumption: 8W.Meets or exceeds CE, FCC, IC standards.Power adapter included (54VDC, 1.1A).Maximum PoE+ wattage per port by PSE: 30W.Dimensions: 1.25"H x 6.44"W x 3.92"D.Managed with the UniFi Network application (version 7.2.94 and later).Wall-mountable (kit is included)

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x SFP ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 300W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

Featuring 48 PoE+ (802.3af/at compliant) ports, the TP-LINK JetStream switch supports a total PoE power budget up to 384W. Omada's software-defined networking (SDN) platform integrates network devices, including access points, switches and routers, providing 100% centralized cloud management. Omada creates a highly scalable network, all controlled from a single interface. The switch provides seamless wireless and wired connections, making it great for use in hospitality, education, retail, offices, and more. An abundance of L2+ and L3 features are supported to help build a highly scalable and robust network, providing a reliable and efficient solution for enterprises, campuses, and ISPs..Convenient managed gigabit switch with 48-port PoE+ for a complete Omada network.48 x 802.3af/at compliant gigabit PoE+ ports and 4 x gigabit SFP slots provide high-speed connections.Switching capacity: 104Gbps; packet forwarding rate: 77.4Mbps.Comes in a 1U rack-mountable form factor.SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and to send traps on abnormal events.With QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply.Security features include IP-MAC-Port-VID Binding, Port Security, Storm Control, and DHCP Snooping to defend against a range of network threats.Maximum power consumption: 485.4W.Meets or exceeds the CE, FCC, and RoHS standards.Integrated list of common DoS attacks is available, making it easier than ever to prevent them.Users' network access can be controlled via 802.1X authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided.QinQ, L2PT, PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind.Device Link Detection Protocol (DLDP) offers easy monitoring and troubleshooting of Ethernet links.System requirements: Microsoft Windows 98SE/NT/2000/XP/Vista/7/8/10/11, macOS, NetWare, UNIX, or Linux.Package contents: switch, power cord, rack mounting kit, rubber feet, quick installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE++ ports (90W/port) provide a total of 2880W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Tenda TEG1016D is a high-performance unmanaged Gigabit Ethernet switch designed for small to medium-sized businesses, community networks, and industrial applications. With 16 auto-negotiating 10/100/1000 Mbps RJ45 ports, it provides robust and reliable network connectivity to handle bandwidth-intensive tasks, including large file transfers and stable video streaming. The switch boasts a switching capacity of 32 Gbps, ensuring seamless data transmission across all connected devices, and supports jumbo frames up to 9 KB, making it suitable for applications that require high throughput. The device includes an 8K MAC address table, enhancing its capability to manage multiple network devices simultaneously. Housed in a durable 13-inch metal casing, the TEG1016D offers versatile mounting options for desktop, wall, or rack installation, ensuring it fits various environments. It is fanless for silent operation, making it ideal for noise-sensitive settings. Furthermore, its 6 kV lightning protection shields both ports and the power supply from electrical surges, providing stability and durability even in harsh environments. With plug-and-play functionality, no technical configuration is needed, simplifying installation for users. Designed with low power consumption (≤10W) and advanced cooling, it is energy-efficient while maintaining reliable performance. The TEG1016D adheres to industry standards like IEEE 802.3, 802.3u, and 802.3ab, ensuring compatibility with a wide range of network devices. Whether used in an office, factory, or residential setting, the TEG1016D delivers stable, high-speed network connectivity with minimal maintenance, making it a cost-effective solution for enhancing your network infrastructure..Equipped with 16 auto-negotiating 10/100/1000 Mbps Gigabit Ethernet ports, the TEG1016D is a high-performance, unmanaged switch designed for small to medium-sized networks..The TEG1016D does not support Power over Ethernet (PoE), making it ideal for applications that do not require powered devices..Offers a maximum data transfer rate of 1 Gbps per port and a total switching capacity of 32 Gbps for fast and efficient communication..Designed with a compact and durable 13-inch metal casing, it supports desktop, wall, and rack mounting for flexible installation..This model does not include wireless connectivity and is dedicated to wired Ethernet connections for stable and high-speed networking..The TEG1016D does not include SNMP (Simple Network Management Protocol) support, as it is a fully unmanaged switch..Supports basic Quality of Service (QoS) features through IEEE 802.1p prioritization, ensuring smooth traffic handling for critical applications..Features plug-and-play functionality with no configuration required and includes 6 kV lightning protection to safeguard against electrical surges..Delivers a packet forwarding rate of 23.8 Mpps with full-duplex support, optimizing throughput for bandwidth-intensive operations..Operates with low power consumption, using ≤10W under full load, and employs a fanless design for silent and energy-efficient performance..Certified for CE, FCC, and RoHS standards, the TEG1016D adheres to international safety and environmental guidelines while supporting IEEE 802.3, 802.3u, 802.3ab, and 802.3x protocols.

Cisco Catalyst IE3300 Rugged Series switches deliver high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Rugged Gigabit Ethernet switch for a wide range of industrial applications where hardened products are required.This model has 8 x 10/100/1000 RJ45 copper ports, 2 x 100/1000 SFP uplinks, and expandable to up to 26 ports of GE by attaching one of eight compatible modules.Can be managed with powerful management tools such as Cisco DNA Center and Cisco Industrial Network Director, and a completely redesigned user-friendly modern GUI tool called WebUI.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 23W.Built for harsh environments and temperature ranges (-40 degrees Fahrenheit to 167 degrees Fahrenheit).Fanless, convection-cooled with no moving parts for extended durability.Hardened for vibration, shock and surge, and electrical noise immunity.Complies with multi-industry specifications for automation, ITS, and substation environments.Improves uptime, performance, and safety of industrial systems and equipment.Alarm I/O for monitoring and signaling to external equipment.Enables ultrahigh definition (UHD), PTZ IP cameras, programmable logic controllers (PLC) and Wi-Fi 6 access points.Delivers multiple rings and redundant ring topologies for new network configurations.Extends geographical scalability where longer-distance connectivity is required.SwapDrive for zero-configuration replacement.Full Flexible NetFlow (FNF) provides enhanced flow and threat visibility.IPv6 Ready Logo certified.Comes with Network Essentials perpetual license.5-year manufacturer limited warranty

The Grandstream GWN7813P is a high-performance Layer 3 managed switch designed for medium-to-large enterprise networks. Featuring 24 Gigabit Ethernet ports with PoE++ support and 4 10G SFP+ uplinks, it delivers up to 128Gbps switching capacity for seamless data flow. Smart power control enables dynamic PoE allocation per port, with a total budget of 360W and up to 60W per port. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your network, while built-in QoS and ACL filtering optimize traffic prioritization. The GWN7813P supports IPv4/IPv6 routing, stacking, and is managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms. Its versatile mounting options and robust design make it ideal for scalable, secure, and intelligent business deployments..24 Gigabit ports and Layer 3 managed switching for enterprise-grade control..Enables dynamic PoE++ allocation with up to 60W per port and 360W total power budget..Up to 128Gbps switching capacity and supports 4 high-speed 10G uplinks..Suitable for desktop, wall, or rack mounting with included installation accessories..Supports SNMP v1/v2c/v3 for remote monitoring and network diagnostics..Prioritizes traffic using advanced QoS with shaping, scheduling, and rate limiting..Secures networks with ARP inspection, IP guard, DoS defense, and port isolation..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Optimizes energy use with smart power control and efficient fan speed adjustment..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ and four 10Gb uplink ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 11.3"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 1Gbps SFP ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.96Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Amer Networks™ SD5 Nway fast Ethernet switch in white, is a perfect choice for small workgroups. This desktop unmanaged switch helps you to multiply bandwidth, boost response time and satisfy heavy load demands. The 5-port switch supports Auto-MDIX, which automatically compensates the connection type. The palm-sized switch allows you to connect any port to either a 10 Mbps or 100 Mbps network..Fast Ethernet unmanaged switch connect any port to a 10 or 100 Mbps network to multiply bandwidth, boost response time & satisfy heavy load demands.5 x RJ-45 10/100Base-T auto-negotiation network.Switching capacity: 1 Gbps, forwarding rate: 148800/pps.Dimensions: 1.1"H x 4"W x 3.2"D.Meets FCC class A, CE mark class A standards.Form factor: Desktop.Power supply: External power adapter 7.5 VDC, 1 A.Indicators: LED status - port link activity, port connectivity, power.Mac address: 1000.Layer supported: 2, color: White.Includes Ethernet switch, AC power adapter and quick installation guide.Temperature rating: 32 to 122 deg F (operating), humidity: 10 to 90% operating.Weight: 1 lbs..Comes with limited lifetime warranty.White 5-port fast Ethernet desktop unmanaged switch connect any port to either a 10 Mbps or 100 Mbps network to multiply bandwidth, boost response time, and satisfy heavy load demands.

11% off  of Netgear Plus 8-Port Gigabit Ethernet Managed Switch, Gray (MS108EUP-100NAS)

NETGEAR Plus switches with PoE meet business networks growing needs by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus Switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. The Netgear MS108EUP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE) that can provide up to 60W/port. This switch can power devices such as VoIP phones, surveillance IP cameras, wireless access points and many other applications. Netgear Plus switch includes advance PoE control to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can charge and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Business-friendly and easy-to-use web browser-based management GUI.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Advanced PoE controls: manage PoE prioritization, scheduling, power limit per port, and more for simple control over all PoE-powered devices.Fanless design makes this switch perfect for noise-sensitive environments.Simple, yet useful network set-up on top of plug-and-play connectivity.VLAN support for traffic segmentation.Auto “denial-of-service” (DoS) prevention.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Port mirroring for network monitoring.Loop prevention and broadcast storm controls.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty

Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty

Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty

The D-Link® DGS-1210 series DGS-1210-52MP Gigabit web smart switch offers 48 10/100/1000BASE-T PoE ports with 4 Gigabit SFP ports for optical connections using multimode or singlemode SFP transceivers. It supports IPv6 management to ensure the safety of your network and incorporates Green 3.0 technology to save power. Auto surveillance VLAN feature consolidates data and surveillance video transmission through the network and protects the quality of realtime video. The switch ensures protection against traffic flooding caused by virus attacks with safeguard engine. The IEEE 802.3x flow control function allows servers to directly connect to the switch to ensure fast and reliable data transfer..Ethernet switch.Dimension: 17.32" x 8.27" x 1.73", 19" standard rack mounting width, 1U height, Weight: 5.69 lbs. (91 oz).Comes in black color.Total number of network ports: 52, number of total expansion slots: 4.Media type supported: optical fiber, twisted pair.Expansion slot type: SFP.Supports IEEE 802.1p quality of service and supports DSCP.Auto surveillance VLAN, cable diagnostics, LLDP/LLDP-MED, auto voice VLAN.Comes with lifetime limited warranty.Ethernet switch supports IEEE 802.1p quality of service and supports DSCP. Auto surveillance VLAN, cable diagnostics, LLDP/LLDP-MED, auto voice VLAN.

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 240W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Netgear 300 Series Gigabit Ethernet unmanaged switch with PoE provides easy, reliable, and affordable network connectivity for home and small offices. With this unmanaged plug-and-play switch, you can expand your network connections to multiple devices instantly. The SOHO gigabit PoE unmanaged switch supports Netgear's FlexPoE exclusive upgradeable PoE feature. Powered by the flexible integrated PoE+ technology, you can increase or decrease the PoE budget by simply purchasing a new Netgear FlexPoE power supply, effectively future-proofing small business networks and budgets. This unmanaged switch contains eight PoE+ ports with 83W total power budget, and includes Netgear FlexPoE, making it expandable to 123W (with separately purchased power supply module)..Unmanaged switch with eight ports provides gigabit Ethernet connectivity to your devices.Provides a total power budget of 83W (up to 30W per port) to power wireless access points, IP cameras, IP phones, and much more; upgradable to 123W PoE+ budget with an additional power supply module.Install your switch on your desktop, or mount it to the wall (wall mount kit included).Quality of Service (QoS) for traffic prioritization.Non-blocking switching architecture for maximum throughput at wire speed.Energy-efficient technology for power savings.Meets or exceed the CE Mark, FCC Part 15 Class A, IC Class B, RCM, VCCI, CB, and CE LVD standards.Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Fanless design for silent operation.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Plug-and-play, no setup required.Durable and rugged metal case for long-lasting use.Great for small office and home networks.Dimensions: 1.1"H x 6.2"W x 4"D.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Box contains: unmanaged PoE Gigabit Ethernet switch, power adapter/cord (localized to the North America region), rubber foot pads for desktop installation, wall mount kit, installation guide.3-year manufacturer limited warranty

TRENDnet® 8-Port green net switch features green net technology which adjusts the power voltage as needed. Gigabit green net switch boost your office efficiency and eliminate network congestion..8 ports 10/100/1000base-T gigabit ethernet.Address database size: 8000 MAC addresses.Management: Unmanaged switch.Power: Input: 100 - 240 V, 50/60 Hz, 190 mA, output: 5 VDC, 1 A external power adapter, consumption: 3.5 W (max.).Form factor: Desktop.Dimensions: 1"(H) x 5.8"(W) x 3.8"(D).Media type supported: Twisted pair, twisted pair cable standard: category 6.Layer supported: 2.Switch fabric: 16 Gbps forwarding capacity.Data RAM buffer: 256 Kbytes, jumbo frame support: 9216 bytes.Protocol / topology: CSMA/CD, Star.Network media: Ethernet: Cat. 5 up to 100 m, fast Ethernet: Cat. 5 up to 100 m, Gigabit Ethernet: Cat. 5, 5e,6 up to 100 m.Data rate: Ethernet: 10Mbps/20Mbps (half/full-duplex), Fast Ethernet: 100Mbps/200Mbps (half/full-duplex), Gigabit Ethernet: 2000Mbps (full-duplex).Store and forward switching architecture with non-blocking wire-speed performance.Temperature: Operating: 0 - 40 deg C, storage: -10 - 70 deg C, humidity: max 90% (non-condensing).Includes multi-language quick installation guide, power adapter (5 VDC, 1 A).Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Weight: 13.4 oz..Warranty: 3 years limited.Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Warranty: 3 years limited.TRENDnet® 8-Port green net switch reduces power consumption by up to 70 percent and provides high bandwidth performance.

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE++ ports (90W/port) provide a total of 720W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Netgear 300 Series Gigabit Ethernet unmanaged switch with PoE provides easy, reliable, and affordable network connectivity for home and small offices. With this unmanaged plug-and-play switch, you can expand your network connections to multiple devices instantly. The SOHO gigabit PoE unmanaged switch supports Netgear's FlexPoE exclusive upgradeable PoE feature. Powered by the flexible integrated PoE+ technology, you can increase or decrease the PoE budget by simply purchasing a new Netgear FlexPoE power supply, effectively future-proofing small business networks and budgets. This unmanaged switch contains eight PoE+ ports with 83W total power budget, and includes Netgear FlexPoE, making it expandable to 123W (with separately purchased power supply module)..Unmanaged switch with eight ports provides gigabit Ethernet connectivity to your devices.Provides a total power budget of 83W (up to 30W per port) to power wireless access points, IP cameras, IP phones, and much more; upgradable to 123W PoE+ budget with an additional power supply module.Install your switch on your desktop, or mount it to the wall (wall mount kit included).Quality of Service (QoS) for traffic prioritization.Non-blocking switching architecture for maximum throughput at wire speed.Energy-efficient technology for power savings.Meets or exceed the CE Mark, FCC Part 15 Class A, IC Class B, RCM, VCCI, CB, and CE LVD standards.Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Fanless design for silent operation.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Plug-and-play, no setup required.Durable and rugged metal case for long-lasting use.Great for small office and home networks.Dimensions: 1.1"H x 6.2"W x 4"D.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Box contains: unmanaged PoE Gigabit Ethernet switch, power adapter/cord (localized to the North America region), rubber foot pads for desktop installation, wall mount kit, installation guide.3-year manufacturer limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE® and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. Catalyst 9200 Series switches also provide operational choice of Cisco DNA Center, or cloud monitoring for Catalyst..This 24 Gigabit Ethernet switch extends the power of intent-based networking and hardware. and software innovation to a broader set of deployments.Full Power over Ethernet Plus (PoE+) capability for up to 48 ports.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.Enhanced security with AES-128 MACsec encryption.Flexible downlink options with data, PoE+, or mGig.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE).Simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network

Introducing the NETGEAR GS116PP 16-Port Gigabit Ethernet Unmanaged Switch with 183W PoE budget . The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116PP the ideal cost-effective and future-proof solution for any home or business environment. A unique combination of features from Netgear makes this switch one of the most adaptive on the market..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 183W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.NETGEAR GS116PP is the industry’s first flexible PoE+ 16-Port Gigabit with a compact and fanless design.

Introducing the NETGEAR GS116PP 16-Port Gigabit Ethernet Unmanaged Switch with 183W PoE budget . The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116PP the ideal cost-effective and future-proof solution for any home or business environment. A unique combination of features from Netgear makes this switch one of the most adaptive on the market..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 183W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.NETGEAR GS116PP is the industry’s first flexible PoE+ 16-Port Gigabit with a compact and fanless design.

Cisco Catalyst 9200 series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 series switches give you what you need now with investment protection on future innovations..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ 4x1G uplink ports.Supports Cisco IOS XE software that opens a completely new paradigm in network configuration, operation, and monitoring through network automation.Operational efficiency, supporting stacking bandwidth up to 80Gbps.Dimensions: 1.73"H x 17.5"W x 11.3"D.Provides optimum power saving with Energy-Efficient Ethernet (EEE) on the RJ45 ports and low-power operations for the perfect power management and power consumption capabilities.Features 2GB DRAM, 4GB flash memory.Resiliency with field-replaceable units (FRU) and redundant power supply, fans, and modular uplinks.Provides infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond.Offers Gigabit Ethernet speeds with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed; industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic at wire speed.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack; equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Advanced network monitoring using full Flexible NetFlow.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I equipment standards.Lifetime manufacturer limited warranty

These are times of unprecedented change for small businesses. Consumers are more demanding than ever before. Online transactions have accelerated. While this new promises greater reward, it also requires small businesses to accelerate digital transformation..Type of Ethernet Switch: Unmanaged 24-Port Ethernet Switch.No. & Type of Ports: 24-Port.System Management: Unmanaged.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 16.34 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.Limited Lifetime Warranty.Affordable, Plug-and-Play Switches for Small Business Networks

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 9x gigabit Ethernet and 1x 1Gbps SFP port engineered for 1Gb AV over IP.8 PoE+ ports (30W/port) provide a total of 110W of power, so you can power and connect your devices with a single wire.20Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power adapter, power cord, console USB Type-C cable, flat brackets for desktop or wall mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x gigabit SFP ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 125W of power, so you can power and connect your devices with a single wire.24Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE Compliant Managed Network.No. & Type of Ports: 8-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 151.4 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP+.No. & Type of Ports: 48-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 10.1 x 1.7".Power Consumption: 382 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

36% off  of Netgear 300 Series 24-Port Gigabit Ethernet Unmanaged Switch, 10/100/1000 Mbps, Black (GS324-200NAS)

Netgear 300 Series Gigabit Ethernet unmanaged switches provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly. Just step up to switch directly to avoid congestion due to stacking up lower port count switches and be ready for future expansion..Unmanaged switch provides easy, reliable, and affordable network connectivity for home and small offices.Contains 24 x 10/100/1000Mbps ports (auto uplink).Non-blocking switching architecture for maximum throughput at wire speed.Dimensions: 1.7"H x 9.9"W x 7.1"D.Power consumption: 12.1W max and 4.33W standby; features energy-efficient technology for power savings.Certifications and standards: Meets or exceeds CE Mark, FCC Part 15 Class A, IC Class A, RCM, VCCI, CB, CE LVD standards.Fanless design for silent operation.Desktop-, wall-, and rack-mountable (rack-mount kit included).Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Auto negotiation for automatic connection at the highest common speed between the switch and end device.802.1p QoS for traffic/frame prioritization.Plug-and-play; no setup required.Durable and rugged metal case for added protection.Standards-based technology ensures interoperability with any standards based devices in the existing network.3-year manufacturer limited warranty

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP.No. & Type of Ports: 52-Port.System Management: Managed.Rack-Mountable Design.Dimensions (H x W x D): 1.7 x 17.3 x 10.1".Power Consumption: 382 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable.Limited Lifetime Warranty.The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks.

This Tenda SOHO Gigabit Ethernet switch offers plug-and-play simplicity, reliability for your small office or home/office network. Compared with a 100Mbps switch, it enhances transmission speed up to 10 times and eliminates the bottleneck of cascading bandwidth..Unmanaged Gigabit Ethernet switch provides you with high-speed, reliable, and easy-to-use connection.Switch has eight 10/100/1000Mbps auto-negotiation RJ45 ports, auto MDI/MDIX.Dimensions: 0.94"H x 3.54"W x 5.59"D.Max power consumption: 4W (9V DC).Certifications and standards: Meets or exceeds CE, FCC, RoHS standards.With desktop or wall-mounting design, you can put the switch anywhere you want and move flexibly; it comes in a pretty dome-shaped pattern plastic case.Features store-and-forward mechanism, auto-learning and auto-aging MAC address, switching capacity of 16Gbps.Transfers data without loss to ensure stable and blazing fast wired network performance.Plug and play, no configuration required

The Netgear brings the first Unmanaged Multi-Gigabit PoE++ switch MS108UP with 60W per port Ultra60 PoE++ technology, great for powerful PoE++ installations with PoE budgets up to 230W, a compact size, plug-and-play installation, and reliable performance at affordable prices. The new model MS108UP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE), providing up to 60W/port. The new switch model can power devices such as VoIP phones, surveillance IP cameras, wireless access points, and many other applications. This new Unmanaged switch provides PoE Auto-Balance to help automatically balance the PoE power based on the device needs independent of PoE class detected. With the growing deployment of applications and an all-in-one solution, providing multi-speed and high power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated, non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can power and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop or mount it to your wall with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Eight ports of multi-gigabit 1G/2.5G speeds to connect devices instantly and give them each exactly the speed they need: 1G or 2.5G automatically.Unique PoE Auto-Balance technology automatically balances the PoE power based on the device's needs independent of PoE class detected.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design makes this switch perfect for noise-sensitive environments.Easy monitoring through per-port LEDs for port activity and speed.Simple, yet useful network set-up on top of plug-and-play connectivity.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty

The NETGEAR GS105Ev2 Plus Desktop Switch features 5-Port Gigabit Ethernet, ProSAFE Lifetime Protection and more..5 Gigabit Ethernet ports.Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or wall mount placement.The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert; 2 years warranty on power adapter.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Certifications and standards: CE, FCC Part 15, VCCI, RCM, KCC, EAC, CCC, CE LVD.NETGEAR Plus Switch

NETGEAR ProSAFE 8-port Gigabit Desktop Switch, designed for business with simple plug-and-play connectivity and no configuration needed. It comes with a sturdy metal case and the NETGEAR Limited Lifetime Warranty. It supports Energy Efficient Ethernet (IEEE802.3az) for optimized energy savings and DSCP-based QoS for traffic prioritization..The standards-based ProSAFE Gigabit switches senses and adjusts for network speed and cabling type automatically. Easily integrates into your existing Ethernet network - no matter if it is running at 10/100Mbps or Gigabit speed. Simple set up with no software or configuration needed. Front panel LEDs keep you informed of power status, link speed and link activities..Prioritize mission-critical applications such as voice and video Support IEEE 802.1 p and DSCP-based QoS for delivering data based on priority and type..Superior network performance at non-blocking rate delivers true Gigabit speed with no compromise..Supports the latest Energy Efficient Ethernet standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used. Energy savings lead directly to cost savings in operation..Certifications and standards: CE, FCC Part 15, ICES-003, VCCI, RCM, EN 60950-1.Lifetime manufacturer limited warranty; 2-year warranty on power adapter.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

The Aruba JL319A 2930M 24-port Gigabit Ethernet switch in black, features 12.38MB, 4.5MB ingress/7.875MB egress packet buffer, 4GB eMMC and 1GB of DDR3 SDRAM memory. It has 20 x autosensing 10/100/1000 ports and 4 x combo 10/100/1000BASE-T or 100/1000 Mbps SFP ports. This switch has maximum throughput of 95.2 Mbps..Gigabit Ethernet switch provides faster throughput.Ports: (20) autosensing 10/100/1000 ports, (4) combo 10/100/1000Base-T or 100/1000 Mbps SFP ports.Allows you for Aruba central, web browser, SNMP manager and RMON1 management.Throughput: 95.2 Mpps.Dimensions: 1.73"H x 17.42"W x 12.7"D.Certifications and standards: Meets UL 60950-1, 2nd Edition, CSA 22.2 No. 60950-1-07 2nd, VCCI Class A, CNS 13438 standards.Comes in black color.Packet buffer: 12.38MB, 4.5MB ingress/7.875MB egress, memory: 4GB eMMC, 1GB DDR3 SDRAM, processor: ARM Cortex A9 dual core at 1016 MHz.Features PoE, half or full duplex and (1) uplink slot.Weight: 9.81 lbs..Comes with limited lifetime warranty

Pure compatibility, pure stability, pure design. The perfect fit for any stable, future-proof system, even where space is limited..This unmanaged Gigabit Ethernet switch features five ports, supports speeds of 10/100/1000 Mbps, and operates without the need for configuration..Data transfer rate of 10/100/1000 Mbps, supporting Gigabit Ethernet speeds.It has a mega compact form factor, measuring just 55 x 55 x 16 mm (2.17 x 2.17 x 0.63 inches), which is smaller than a standard business card..Designed for straightforward plug-and-play operation without the need for configuration.With a throughput of 10/100/1000 Mbps, this device supports Gigabit Ethernet speeds and operates in a non-blocking layer 2 mode, ensuring efficient data transfer without packet loss..Maximum power consumption of 3.3W.Industrial operating temp (-40 °C to +85 °C / -40°F to +176°F).Seamless integration with design software - logical placements and fixed distances.Board to board and board to cable connection.LEDs visible in all orientations – can be directed to outer casing via fiber optics or light pipe, or electrically wired.Comes with a 10 year limited warranty