2-Channel Amplifiers

The Pyle PFA300 90 Watt Hi-Fi Stereo Class-T Amp is a small digital amplifier with up to 90 watts of power. Use it in your car, your RV, your golf cart or your home—anywhere you need a great amplifier with low distortion and acoustically accurate reproduction of music. Adjust the bass and treble to your liking, or bypass the included equalizer. It has a 3.5 mm stereo input and a stereo RCA. It is 2 ohm to 8 ohm speaker impedance compatible and comes with a 12-volt DC adapter..Total output power: 90 watts.Frequency response: 20 Hz to 20 kHz for acoustically accurate reproduction of music with low distortion.Speaker impedance: 2 ohms to 8 ohms.Signal-to-noise ratio: greater than 80 dB.Total harmonic distortion: less than 0.4%.Customizable sound with tone and direct switch; allows adjustment of how much bass and treble get through to be amplified; switching to direct removes filters from circuit so sound is amplified without any filtering.Supports various external devices with aux/RCA input, microphone input and aux input for karaoke.Crisp buttons and rotary knob controls for audio adjustment.Blue LED illuminated volume knob which also serves as a power indicator.Input power: 9 volts to 14.4 volts, 2 amps DC.Short circuit, overload, and overheat protection keep connected devices functioning properly and safely; built-in loudspeaker protection circuit protects speakers from high volume bursts of audio.Dim: 6.02 in. H x 4.96 in. W x 1.5 in. D.Includes 12-volt AC/DC adapter

Pyle® 1000 Watt power amplifier has fault LEDs that illuminate when the amplifier is aware of any problems. Amplifier also features signal activity LEDs that illuminates when the output signal level exceeds 1 volt..Two channels A/B-bridgeable.Inputs: Electronic balanced; barrier strip, xLR, TRS 1/4".Speaker terminal: Speakons for Ch A, Ch B and bridge; binding post.Cooling fan two-speed DC fan, air flow back to front.110 -220 V switchable.2 x 5 LED indicator red, DDT/cipping; yellow, signal; green, power.Overload and protection indicator.Signal/noise ratio: 102 dB, Distortion: 1.0percent.Frequency response: 20Hz to 20 KHz >+or-0.5dB.Input impedance: balance 20Khz, input level: +4 dB.Warranty: 1 year.Pyle® 1000 Watt power amplifier has a built in fan cooling system to disperse heat and allow ideal operation.

The next generation of Crown XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown's patented DriveCore technology and can drive 350W at 4 ohms bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue..Two-channel power amplifier can drive 350W at 4 ohms bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers.Dimensions: 3.5"H x 19"W x 7.7"D.Comes in black.Provides band pass filter per channel, and higher DSP capabilities with more control.Increased lighting functionality by turning off all LED indicators except clip and thermal to reduce distraction in dark venues.Can be driven at full power with selectable input sensitivity.Set sleep mode after specified time without having to press a button.Security setting disables menu buttons; menu locked/unlocked by entering combination.System reset allows factory settings to be restored.Remote power trigger for convenient use.Peakx Limiters provide maximum output while protecting your speakers.XLR, 0.25", and RCA inputs provide flexibility.Integrated PureBand crossover system for better performance and control.Efficient forced-air fans prevent excessive thermal buildup

The DriveCore Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi series amplifiers are designed, engineered and manufactured to the industry's highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging installed sound applications. Versatile, compact and highly energy-efficient, DCi series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology..Two-channel power amplifier provides system integrators with the advanced features and flexibility required for challenging installed sound applications.Dimensions: 3.5"H x 19"W x 14.25"D.Comes in black.Contains two output channels with 4 ohms impedance.Delivers 300W of the rated power over a longer period.The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.Better monitoring, control and audio manipulation with the HiQnet protocol that's over standard TCP/IP.GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.Save power by integrating the amplifier into a control system so you can easily turn it on and off.Highly efficient internal cooling fans provide airflow to the most heat-generating parts.The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 2000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 90 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 90 W RMS at 8 Ohm, two 125 W RMS at 4 Ohm, 250 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 19.7 lbs..The Gemini® professional power amplifier with 2000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

The JBL CSA 280Z Audio Amplifier (2x 80W) provides a compact and powerful amplification solution for installed applications. The unit utilizes a universal switch-mode power supply and Crown's DriveCore technology to deliver reliable and efficient sound amplification..1 or 2 output channels with 40W, 80W, 120W per channel.Built-in 70V and 100V.Fanless, space-saving 1U design.Sleep mode disable function.Energy-efficient amplifier.Sleek industrial look with illuminated rings making knobs easy to see and use

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 3000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 95 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 150 W RMS at 8 Ohm, two 200 W RMS at 4 Ohm, 400 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 19 lbs..The Gemini® professional power amplifier with 3000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 5000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 100 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 400 W RMS at 8 Ohm, two 550 W RMS at 4 Ohm, 1100 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 26.8 lbs..The Gemini® professional power amplifier with 5000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

Give your home’s soundtrack a boost. The Bose Music Amplifier powers up to two pairs of passive speakers with 125 watts per channel and connects over Wi-Fi so you can stream all your favorites, from playlists to podcasts, easily from your phone. To elevate your sound experience, pair the amp with Bose in-ceiling or outdoor speakers and custom EQ will deliver clear, well-balanced sound. Enjoy the simplicity of controlling your music with the Bose Music app, or stream content your way via Bluetooth, Apple Airplay 2, Spotify Connect, and Chromecast built-in. For more music throughout your home, group the amp with other Wi-Fi -enabled Bose products. SimpleSync technology lets you pair it with a compatible Bose headphone or Bluetooth speakers for private listening or more sound. When it comes to your record player, connect easily for maximum enjoyment of your vinyl collection or allow guests to take over the vibe by pairing via Bluetooth..Audio Amplifier Commonly used for enhancing sound in home audio systems.Connect everything from speakers, to TVs and CD players, then use the Bose Music app to adjust audio or control music..USB or optical inputs, depending on the specific model..Audio control for bass and treble adjustments..SimpleSync connectivity.EQ control for select Bose speakers.Stereo and mono settings.Wi-Fi and ethernet connectivity.Compatible app: Bose Music app.Outputs: Ethernet, Analog, Bass, Two sets of speakers.Inputs: Power, Ethernet, Analog, Optical, USB (Service only)

The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference..This powerful, rugged, and reliable amplifier is suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.Contains two inputs with one 1350W output.Electronically balanced RCA and XLR inputs; binding post and Speakon outputs.Supports stereo/parallel/bridge-mono mode.User-selectable input sensitivity: 0.78V and 1.4V.Efficient forced-air cooling prevents excessive thermal buildup.Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel.Provides protection against shorts, no load, on/off thumps, and radio-frequency interference

The CDi Series amplifiers are professional tools designed and built for installed sound applications. Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user-defined DSP presets are available..Two-channel power amplifier is a professional tool designed and built for installed sound applications.70Vrms/140Vrms outputs.Accurate, uncolored sound with very low distortion for the best in music and voice reproduction.Onboard digital signal processing (DSP) includes crossovers, EQ filters, delay, and output limiting.Features intuitive front-panel LCD screen for quick, easy configuration.Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads, and internal faults.Switch-mode universal power supply

Built for installed sound applications, the CSA 2300Z Dual-Channel 300W Amplifier from JBL delivers powerful sound and efficient performance using the Crown’s DriveCore commercial power amplifier technology..Two channels with 300W output each.Integrated output transformer to drive 70V or 100V speaker systems.Ideal for commercial and industrial use.Euroblock style input connectors.Barrier strip output connectors

The DriveCore Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi series amplifiers are designed, engineered and manufactured to the industry's highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. This amplifier is EN 54-16 compliant for life safety applications..Two-channel power amplifier with BLU Link is versatile, compact and highly energy-efficient.Features GPIO, AUX, Ethernet, and BLU Link In and Out ports.With digital audio transport via HARMAN's proprietary BLU Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage - at a much lower cost.Better monitoring, control and audio manipulation with the HiQnet protocol that's over standard TCP/IP; remotely see how all networked DCi amplifiers are performing and control them as needed.In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.Meets or exceeds the EN 54-16 standard.3-year manufacturer limited warranty