24 AWG Ethernet Cables

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

With a polyvinyl chloride jacket, the StarTech C6PATCH100WH 100' white molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Cable length: 100'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, ETL, TIA/EIA-568-B.1-2001 T568B certifications and standards.Color: White, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.Has colored hoods for departmental color coding

Make Power-over-Ethernet-capable Gigabit network connections. The C6PATCH20RD Cat 6 Patch Cable (20 ft) meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections, and features a durable red PVC jacket that enables you to color code your network cable runs as needed. To ensure long-lasting performance, this high quality Cat 6 patch cable features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could decrease network performance. Constructed of only top quality materials, this Gigabit Patch Cable delivers reliable performance and is backed by our Lifetime Warranty.100% Copper - a better value StarTech.com Cat6 cables are manufactured using high-quality copper conductors. While many cable manufacturers offer a "cheaper" cable, based on a copper-coated aluminum core, we make no compromises on quality to ensure you receive top value and performance for your network cable investment.24 AWG Wire This Cat6 cable is constructed with 24 gauge copper wire, to support a broad range of Ethernet applications such as Power over Ethernet (PoE). Because we use a high quality copper wire, our cables easily sustain the power required for Power over Ethernet applications, whereas the inferior quality offered by copper-coated aluminum cables may be subject to insufficient power delivery, heat buildup, equipment damage and potentially, fire.50-micron Gold Connectors This molded patch cable offers high quality connectors comprised of 50-micron gold, to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion..Allows you to access all of the networked data, swiftly and securely.Features Category 6 cable type.Features Molded.Certifications & Standards: ETL

StarTech.com® UTP Cat 6 Patch cable in blue color offers reliable signal routing in IT hardware of 500 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 35' cable has eight 24 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Snagless design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Cat6 utp patch cable offers reliable signal routing.Easy-to-install 35' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in blue color for a new look.StarTech.com® N6PATCH35BK 35' Blue UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.

Orange.Category 5e bare wire/bare wire.High-density polyethylene insulation.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, plenum, MPR.Outer diameter: 5.3 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 89 Ohm/km, Insulation resistance: 100 Ohm/km.Foot-marked cable.Ideal for 10Base-T(IEEE 802.3), 100BASE-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), token ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, voice and multimedia.CM/CMR rated for use in walls and conduit in ceiling.Bandwidth: Supports voice/data/video distribution applications up to 350 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 9-foot yellow patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionsEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH9YL is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Yellow PVC jacket for color coding your connections.9 ft. in length

Monoprice® 25' Cat5e UTP Ethernet network cable with a data transfer speed of 350 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in black color has snagless strain relief boots and provides reliable performance..Black.Cat5e.Fixed length network cables are the perfect combination of value and performance.25'.Gauge: 24 AWG.Cable rating: 350 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 25' Cat5e UTP Ethernet network cable in black color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

C2G® CAT6 UTP Patch cable in white color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 10' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 10' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in white color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.29 lb.Comes with lifetime warranty.C2G® 27163 10' White CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

The C2G® 7' male to male category 6 yellow snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in yellow color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G ® 3' white Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.Length: 3 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: White.Manufacturer Warranty: Limited lifetime warranty.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G 3975 6' blue Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Dimensions: 6'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Type: Patch cable - CAT 6.Technology: UTP.Wiring Scheme: T568B.Wires per Cable: 8 wires.Features: Snagless, stranded , minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Manufacturer Warranty: Limited lifetime warranty

The C2G 22014 15' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15 ft.Black.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty.The StarTech Slimline Serial DB9 gender changer is a reliable way to convert a nine-pin female port to a nine-pin male port.

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 1-foot gray patch cable is perfect for use in server closets, patch panels and with Ethernet hubs. The cable is intended for short-distance applications such as point-to-point in-rack and across-rack network switch and server connections. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH1GR is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Gray PVC jacket for color coding your connections.1 ft. in length for shorter connections, without the clutter of excess cable

StarTech.com® Bulk roll Cat5e cable in blue color is suitable for network installation at home, office and educational institution. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 1000' cable has eight 24 AWG conductors for providing reliable connection and high data transfer speed. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. It is easy to install on walls, conduit, ceiling and other vertical places involving Ethernet network applications..Utp cable is ideal for network installation at home, office or educational institution.Easy-to-install 1000' long cord.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in blue color for a new look.Meets CMR flame retardant test to minimize fire hazards.4 pair UTP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.The 350 MHz rated cable offers brilliant performance and bandwidth over the standard 100Mhz Category 5e specifications.Meets all requirements and standards of RoHS, Industry Standards: Category 5, CMR.Includes 1 x 1000' bulk roll of blue CMR Cat5e solid UTP cable.CMR rated for use in walls, conduit, ceiling and other vertical applications.Comes with limited lifetime warranty.StarTech.com® WIRC5ECMR 1000' Blue Cat5e cable offers enough bandwidth to carry 350 MHz signal in Ethernet network applications. The 4-pair UTP conductors offer true connection.

The C2G 31341 5' Cat6 snagless white network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

Monoprice® Flexboot Series 25' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in green color has snagless strain relief boots and offers high performance..Green.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.25'.Gauge: 24 AWG.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 25' Cat6 UTP Ethernet network cable in green color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

The C2G 27152 7' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 7'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G® 7' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.7ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.178 lbs..Comes with lifetime warranty

StarTech.com® UTP Cat 5e Patch cable in black color offers reliable signal routing in IT hardware of 350 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 50' cable has eight 24 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Molded design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Utp patch cable for use with fast ethernet networks with power over ethernet capability.Easy-to-install 50' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.Molded cable offers flexibility.Meets CMG flame retardant test to minimize fire hazards.4 Pair STP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.CAT5e rated cable provides performance of up to 350 MHz.Incorporated with colored hoods for departmental color coding.50-micron gold connectors for peak conductivity.Meets all requirements and standards of RoHS.Includes 1 x 50' grey molded Cat 5 patch cable.Designed for use with Fast Ethernet networks, patches from hub to distribution panel.Comes with limited lifetime warranty.StarTech.com® M45PATCH50BK 50' Black UTP Cat 5e patch cable is useful for Ethernet network application. Molded RJ45 connectors offers reliable connection.

For fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat5e TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..For Data Networking - 1 x 1000Base-SX - 62.5/125 µm Optical Fiber1 Gbit/s.Color: Black.Product Type: SFP Transceiver.Interfaces/Ports: 1 x 1000Base-SX.Lifetime warranty

The N201-06N-WH Premium Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. This six-inch white cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-06N-WH delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)..Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from stress and cracking.Certifications & Standards: IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)

Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from

The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 2-foot purple patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionsEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH2PL is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Purple PVC jacket for color coding your connections.2 ft. in length

The C2G ® 6" RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. It features RJ-45 male connectors on both ends for enhanced connectivity. The 24 AWG stranded bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. This bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modems, DSL/cable modems, patch panels and other high performance networking applications..Type: Network Cable.Cable Type: Category 6.Cable Length: 0.5'.Size: 6".Color: Blue.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Diameter: 6.2 mm + 0.03 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.03 lbs..Comes with lifetime warranty.952 C2G - KVM & Networking 6" Cat6 Snagless Unshielded Network Patch Cable - Exponentially reduces impedence and structural return losses

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.