Aluminum Ductwork

The Semi-Rigid Flexible Aluminum Duct (6 in. dia x 8 ft.) from Deflecto is meant for multiple uses--dryer, bathroom or kitchen. Its semi-rigid construction makes it flexible enough for easy installation..6" dia x 8ft length.Fire-resistant aluminum.Multiple uses - dryer, bathroom or kitchen

This 4 in. Aluminum Duct (Multi-ply, 5 ft.) from Deflecto is a UL-listed, Class 1 air connector. It can be used in low- to medium-pressure HVAC applications, bathroom venting and general venting. The ducting is also flexible, easy to install and comes with 2 spring clamps..4" diameter.UL 2158A.Includes 2 clamps.Nonretail polybag.2-ply.5ft.UL 181 Class 1.WARNING: This product can expose you to Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65WARNINGs.ca.gov.

The Deflecto® FM0450 duct is made of flexible aluminum for added strength and durability. Measures 4" diameter x 50' and comes with markings on each foot for easy measurement..Flex duct for various venting purposes.2 Ply aluminum construction for durability.Dimensions: 50"L x 4" diameter.Markings each foot for easy measurement.Aluminum duct for flexibility.For use as bath fan exhaust duct.Weight: 4 lbs..WARNING: This product can expose you to Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65WARNINGs.ca.gov..Deflecto® Duct has a length of 50' is perfect to used as bath fan exhaust. Offers easy installation.

The Semirigid Flexible Aluminum Duct (4 in. x 8 ft.) from Deflecto is meant for multiple uses--dryer, bathroom or kitchen. Its semirigid construction makes it flexible enough for easy installation..Fire-resistant aluminum.4" dia x 8ft length.Nonretail bulk

The Semi-Rigid Flexible Aluminum Duct (5 in. x 8 ft.) from Deflecto is meant for multiple uses--dryer, bathroom or kitchen. Its semi-rigid construction makes it flexible enough for easy installation..5" dia x 8ft length.ire-resistant aluminum.Multiple uses - dryer, bathroom or kitchen

The Aluminum Duct (Supurr-Flex Transition Ducting, 5 ft.) has a 4 in. dia. and 2 spring clamps. This clothes dryer transition duct is UL listed 2158A..4" diameter.UL 2158A.Includes 2 clamps.Nonretail polybag.Supurr-Flex transition ducting.5 ft..WARNING: This product can expose you to Tris (1,3-dichloro-2-propyl) phosphate, which is known to the State of California to cause cancer. For more information go to www.P65WARNINGs.ca.gov.

This Rigiflex semi-rigid aluminum flexible yet rigid patented duct is recommended over conventional semi-rigid and foil ducts. This Rigiflex duct requires no elbows as it can form tight 90 degree turns requiring less space to work. The design creates airtight seams and prevents unraveling while handling. The duct is reinforced with bead wire helix to always maintain its round shape. Rigiflex duct is suitable for all general-purpose venting applications including exhaust venting, bathroom fan venting, range hoods and more. It is installer friendly and can be uncompressed easily for installation. Unlike conventional semi-rigid ducts that take up large amounts of space, Rigiflex has a compact compression that is 4 times smaller than the current duct in the market. This reduces space needed for transportation, warehouse, and shelf space in store..Airtight design.Fire-resistant.Class 0 air duct.Improved airflow.Highly flexible.Installer friendly.Patented.Uninsulated.Operating temperature range: -86°F to 482°F.Max. velocity: 5,000 FPM

Lambro's premium semi-rigid, aluminum, flexible yet rigid patented duct is recommended over conventional semi-rigid and foil ducts. This duct requires no elbows as it can form tight 90 degree turns requiring less space to work. The design creates airtight seams and prevents unraveling while handling. The duct is reinforced with bead wire helix to always maintain its round shape. This duct is suitable for all general-purpose venting applications including exhaust venting, bathroom fan venting, range hoods and more. It is installer friendly and can be uncompressed easily for installation. Unlike conventional semi-rigid ducts that take up large amounts of space, the duct has a compact compression that is 4 times smaller than the current duct in the market. This reduces space needed for transportation, warehouse, and shelf space in store..Airtight design.Fire-resistant.Class 0 air duct.Improved airflow.Highly flexible.Installer friendly.Patented.Uninsulated.Operating temperature range: -86°F to 482°F.Max. velocity: 5,000 FPM

Lambro's premium semi-rigid, aluminum, flexible yet rigid patented duct is recommended over conventional semi-rigid and foil ducts. This duct requires no elbows as it can form tight 90 degree turns requiring less space to work. The design creates airtight seams and prevents unraveling while handling. The duct is reinforced with bead wire helix to always maintain its round shape. This duct is suitable for all general-purpose venting applications including exhaust venting, bathroom fan venting, range hoods and more. It is installer friendly and can be uncompressed easily for installation. Unlike conventional semi-rigid ducts that take up large amounts of space, the duct has a compact compression that is 4 times smaller than the current duct in the market. This reduces space needed for transportation, warehouse, and shelf space in store..Airtight design.Fire-resistant.Class 0 air duct.Improved airflow.Highly flexible.Installer friendly.Patented.Uninsulated.Operating temperature range: -86°F to 482°F.Max. velocity: 5,000 FPM

Make solid connections with an Aluminum Pipe from Deflecto. Each length of duct pipe measures 4 in. x 24 in..Snaplock seam to close pipe.Bath, dryer or general purpose venting.Aluminum.Each

Lambro's space saving TiteFit 90 Degree Rectangular Aluminum Dryer Duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in. from the wall for optimum space utilization. The 2 piece aluminum construction allows for these ducts extend from 24 in. to 41 in. in length. This item is ideal for laundry closets where space is limited..Tight space dryer venting solution ideal for limited space behind dryer.Extends from 24 in. to 41 in. to accommodate installation needs.90° connections allow for tight space installations.Ideal for laundry closet installations.Installation requires two 4 in. worm drive clamps (sold separately)

The Easy-Connecting Semi-Rigid Dryer Vent Hookup Kit, 8 ft., from Deflecto means simplicity for you. The kit includes duct twists on Hooker-Upper protectors and slides over dryer vent and outlet while protecting the duct from being smashed behind the dryer. No tools, tape or clamps are required..Semi-rigid aluminum duct.Flexible strip gasket.Duct twists on Hooker-Upper protectors & slides over dryer vent & outlet pipe.Protects duct from being smashed behind dryer.No tools, tape or clamps required for installation.8ft.WARNING: This product can expose you to chemicals including Toluene, which is known to the State of California to cause cancer. For more information go to www.P65WARNINGs.ca.gov.

Lambro's flexible aluminum/aluminum foil flex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250°F. Ideal installations include bathroom fan venting and general exhaust applications. This duct is not to be used when venting a dryer, as a UL2158A transition duct is required for that application..Highly flexible.Installer friendly.Uninsulated.Operating temperature range: -86°F to 257°F.Resists tearing and puncturing

The Lambro 3.25-in. x 10-in. Aluminum Exhaust Hood Vent with 5-in. tail is ideal for venting through the wall. It features a spring-controlled opening and closing gasketed damper that prevents outside elements and air from entering the vent. The damper seals the vent opening when the kitchen, range hood, and microwave are not running because no exhaust air exits the vent. When the appliance operates, the exhaust air pressure pushes the damper open to let the exhaust air escape from the vent. The exhaust vent can easily be used for new and replacement installations over an existing 3.25-in. x 10-in.opening. The vent’s manufacturing material is 22-gauge aluminum for durability and will not rust to maintain longevity. Please be sure to check local building codes before installation..For new or replacement vent installations.Recommended for kitchen, range hood, and microwave exhaust installations.Not for use with clothes dryer venting.Mounts over existing 3.25-in. x 10-in. openings.5-in. tail for through-the-wall installation.Designed for maximum airflow.Spring-controlled opening and closing gasketed damper stays closed when not in use.Made of 22-gauge aluminum for durability and will not rust to maintain longevity.Installation screws not included

Lambro's premium semi-rigid aluminum flexible yet rigid patented duct is recommended over conventional semi-rigid and foil ducts. This duct is suitable for all general purpose venting applications. The duct requires no elbows as it can form tight 90 degree turns. The complete kit allows for venting from the appliance to the outside wall..UL 2158A Certified.Airtight design.Fire resistant.Improved airflow.Highly flexible.Installer friendly.Patented.Uninsulated.Operating temperature range: -86°F to 482°F.Max. velocity: 5,000 FPM.Includes duct, vent, pipe, and clamps

The Supurr-Flex Dryer Vent Kit, 8 ft., from Deflecto has everything you need to get your appliance connected. The SK8WF includes a Supurr-Vent Louvered Vent Hood with pipe and collar, semi-rigid aluminum duct and two 4 in. metal worm clamps..8ft run of duct is UL 2158AKit includes:.Hood.Pipe.Collar.WARNING: This product can expose you to Tris (1,3-dichloro-2-propyl) phosphate, which is known to the State of California to cause cancer. For more information go to www.P65WARNINGs.ca.gov.

Lambro's range vent hood Aluminum Wall Cap allows for maximum exhaust airflow when venting. The built-in spring-controlled damper prevents back drafts while utilizing a foam seal. The minimum size duct allowed on most range hoods is 3.25 in. by 10 in. which is equivalent to a 6-in. round. It is designed for use with rigid ductwork..Opening/closing damper prevents outside elements from entering the vent.Damper is spring loaded to keep damper closed when not in use.Durable aluminum material.3.25 in. x 10 in.