Amber Tape

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have high dielectric strength. The silicon adhesive protection leaves no residue..1" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..3" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..2" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..3/4 inch wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..1 inch wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..2 inches wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Bertech high-temperature masking disks are made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive. These masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Masking disks are primarily used in circuit board production, wave soldering, and other applications. Masking disks are primarily used in circuit board production, wave soldering, and other applications..0.25"Dia high-temperature masking disks.Total thickness: 2.5 mil.Masking disks are primarily used in circuit board production, wave soldering, and other applications.Comes in amber color.Made of 1 mil polyimide film with 1.5 mil silicone adhesive which does not leave any residue.They are packaged on a 3" core; 2000 disks per roll.Tensile strength is 3.5kg/inch (7.72 lbs./inch).Meets or exceeds RoHS standard.Masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments.These disks can withstand temperatures of up to 500 degrees Fahrenheit

Bertech high-temperature masking disks are made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive. These masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Masking disks are primarily used in circuit board production, wave soldering, and other applications..2"Dia high temperature masking disks.Total thickness is 2.5 mil.Masking disks are primarily used in circuit board production, wave soldering, and other applications.Comes in amber color.Made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive, which does not leave any residue.They are packaged on a 3" core, contains 250 disks per roll.Tensile strength is 3.5kg/inch (7.72 lbs./inch).Meets or exceeds RoHS standard.Masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments.These disks can withstand temperatures of up to 500 degrees F/260 degrees C

Bertech High Temperature Masking Disks are made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive. These masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Masking disks are primarily used in circuit board production, wave soldering, and other applications.0.75"Dia. high-temperature masking disks.Total thickness: 2.5 mil.Masking disks are primarily used in circuit board production, wave soldering, and other applications.Comes in amber color.Made of 1 mil polyimide film with 1.5 mil silicone adhesive which does not leave any residue.Packaged on a 3" core and contains 1000 disks per roll.Tensile strength is 7.72 lbs. per inch.Meets or exceeds RoHS standard.Masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments.These disks can withstand temperatures of up to 500 degrees Fahrenheit