Antenna Mounts

The ClearStream J-Mount with Mounting Hardware from Antennas Direct is made from powder-coated steel tube and is ideally suited for the ClearStream series of antennas. The J-Mount is not compatible with the ClearStream 5 antenna. The mount base pivots for flat, angled or vertical use, and includes sealing tape for worry-free installation. The J-Mount also includes all-weather lag bolts, sealing tape and instructions..Ideally suited for antennas.Base pivots for flat, angled or vertical use.Includes mount, all-weather lag bolts, sealing tape & instructions.90-day warranty on parts.Dim: 20"H x 1" Dia

Made for durability and functionality, the ClearStream Universal J-Mount 40-In. Mast from Antennas Direct is engineered to provide reliable support for a wide range of devices, including larger TV antennas, satellite dishes, and more. Its J-shaped design provides stability, and the included pivoting base adapts to provide a secure fit on vertical and horizontal flat mounting surfaces such as a wall, roof, or eave. Constructed from all-weather, powder-coated, 16-gauge steel, this mast is built to withstand harsh outdoor conditions, including wind, rain, and snow, ensuring long-lasting performance. The included mounting hardware simplifies installation, allowing for quick and hassle-free setup..Made for larger TV antennas, satellite dishes, and more.Mast measures 40 in. with a 1-5/8-in. outside diameter, 1.5-in. inside diameter; made with weather-resistant, powder-coated, 16-gauge steel for optimal durability in various weather conditions.Features pivoting base for installation on vertical or horizontal flat surfaces, such as a wall, roof, or eave.Includes 40-in. J-Mount mast with all-weather steel pole and pivoting base, mounting hardware, sealing pads, installation instructions; 90-day manufacturer warranty.Based in St. Louis, MO., Antennas Direct is dedicated to providing superior digital antennas and accessories engineered in the USA

The Zebra® BRKT-70662-01R heavy-duty 16 mount bracket is compatible with Motorola FX7500, RD5000 RFID readers, AN440 and AN480 RFID antennas..16 mount bracket.Compatible with Motorola FX7500, RD5000 RFID readers, AN440, AN480 RFID antennas.Sold individually

Wilson Electronics® Fixed antenna pole mounting assembly kit is made of aluminum for long lasting durability and strength. Includes cylinder post, U-Bolt and mounting bracket for more safety. Comes with a wall-mount bracket that allows for the 10" pole to attach the fascia of a house/building. Suitable for mounting outdoor Yagi and omni antennas to exterior walls..Pole mounting assembly kit features wall-mount bracket for easy installation.Includes cylinder post, U-Bolt and mounting bracket for more safety.Sold as each.Comes with all hardware needed to mount Wilson® outdoor cellular antenna on home or office - wall-mount bracket, 10"L x 1 1/2" dia aluminum pole.The Wilson Electronics® fixed antenna pole mounting assembly kit is suitable for outdoor Yagi and omni antennas. Offers easy mounting and has impedance of 50 ohms.

This Browning® mirror-mount kit includes a heavy-duty, high-performance antenna with a stainless steel 3-way mount. The antenna comes with an 18' RG58 A/U coaxial cable with PL-259 for reliable operation. The antenna contains a standard 3/8" x 24" thread CB mount for easy mounting..Standard 3/8" x 24 thread CB mounting ensures easy installation.Offers high performance with a stainless steel 3-way mount.Includes an 18' RG58A/U coaxial cable and PL-259 connector.Weight: 1.25 lbs..The Browning® mirror-mount kit helps to conveniently mount an antenna. Provides optimum performance.

Cobra® HighGear® CB Magnet mount antenna with 100 W power handling capability has black stainless steel hardware. 21" antenna attaches well to roof or trunk lid with frequency ranging from 26 to 30 MHz and includes 16' coaxial cable and base pad..PL-259 connector.Application/usage: Two-way radio communication.16' braided coaxial cable.Premium base-loaded magnet mount CB antenna attaches easily to roof or trunk lid.100 W power handling capability.Black stainless steel whip and hardware.Weather channel capability.Scratch-resistant base.Includes: SO 239 connector, matched braided coaxial cable and scratch-resistant base pad.Cobra® HighGear® CB Antenna measuring 21" includes scratch-resistant base pad and 16' braided coaxial cable that easily attaches to roof or trunk lid.

Winegard® Gable end mount features an alternative to drilling hole in the roof and gives a secure fit by holding the mast in two places while being suitable for off-air tv antenna. Mount is varied from 48"- 60'' to fit all roofs and gives 2" offset..Provides a secure mount by holding the mast in two places.An alternative to drilling holes in the roof.Provides a 2" offset from the fascia board.Adjustable from 48" to 60" to fit almost all roofs.For mounting TV antenna to roof gable.Compatibility: Off-air TV antenna.Weight: 8.45 lbs..Gable end mount is adjustable from 48" to 60" to fit all roofs and supports a 2" offset from the fascia board and is applicable in off air tv antennas.

Need to replace your antenna? The Metra Side/Top Mount Rubber Antenna for 1 in. Opening makes a great replacement antenna. This heavy-duty unit features a 14 in. rubber mast and a 54 in. cable..Side/top mount split ball for 1" opening.14" removable black conductive rubber mast with 54" cable.44-US07R/AW-US07R/CF-US07R/CK-US07R.WARNING: Cancer and Reproductive Harm https://www.p65WARNINGs.ca.gov

Tram-Browning Inc. offers quality workmanship and materials. Their products provide exceptional performance and function thanks to expert engineering. They are proud to offer the Scanner Trunk/Hole Mount Antenna Kit with BNC-Male Connector..Freq Ranges: 150MHz-174MHz VHF, 440MHz-490MHz Uhf, 800MHz-1,000MHz.18" Tall Black-finish Stainless Steel NMO Mounting Antenna With Gold Plunger-type Contact Pin.Solid Brass NMO Mount With Gold-plated Antenna Contact Pin & High-frequency Fully Enclosed, Fully Shielded, Fully Weatherized Zinc Die-cast Housing.17ft Low-loss RG58/U Coaxial Cable With BNC-male Connector Installed.Stainless Steel "l" Bracket With Black Finish For Trunk Groove Or Side Mounting.Can Be Mounted In 3/4" Hole

Winegard® Swedged antenna is 5' long that suits almost all tv and FM antennas and features 18 gauge galvanized steel masting for longer durability. Antenna has 1.25" outer diameter and can be stacked for larger length..18 gauge galvanized steel masting.Standard for most TV and FM antennas.They can be stacked for greater lengths.Size: 5'(L).Weight: 3 lbs..Winegard® Swedged antenna mast features 1.25" outer diameter and is 5' long which is the standard for tv as well as FM antennas.

Winegard® J-Mount is made of galvanized steel and is 39" long with electro applied Gray coating for protection while being suitable for DBS satellite dish / outdoor tv antenna. Mount has steel wall thickness of 0.060" and pipe outer dia of 1.66"..Galvanized steel pipe.Electro-applied grey coating for maximum protection against the elements.Not recommended for antennas with a boom length longer than 40".Size: 39"(L), Wall thickness: .060".Pipe outer diameter is 1.66".Does not come with a hardware bag - hardware for mounting to this mount should come with the antenna or dish.Use on side of house or roof, mount foot can be used on either end of pipe for best mounting.Compatibility: Outdoor antennas.Galvanized steel.39" J-pipe mount in electro-applied Gray coating for maximum protection against the element is compatible for DBS satellite dish / outdoor tv antenna.

Ubiquiti Quick-Mount helps to quick and easy install your Ubiquiti NanoBeam. Its construction provides flexible, easy alignment..Mount for Ubiquiti NanoBeam.Compatible with NanoBeam.Comes in white.Includes one mount.Quick and easy installation.Flexible and easy alignment

Winegard® Chimney mount features 12' straps that are adjustable and has heavy duty galvanized steel construction for longer life span. Z type chimney mount fits up to 1 5/8" mast..Heavy duty galvanized steel straps.Z-type chimney mount with adjustable 12 ft straps.Fits up to 1 5/8 mast.Weight: 2.15 lbs..Chimney mount features heavy duty galvanized steel strap for longer durability and fits up to 1 5/8" mast.

Tram provides premium antenna components that provide functionality and durability of the antenna to deliver quality communication connections you depend on. Each antenna model is carefully planned and developed to ensure great transmission over many uses. They are proud to offer the 144MHz/440MHz Dual-Band Pre-Tuned Amateur Glass-Mount Antenna..Freq: 144MHz–148MHz/440MHz–450MHz.2.5dBd gain VHF/4.5dBd gain UHF.Max power 50W.Extra-long whip for superior gain & wide bandwidth.28" tall.17ft RG58/U low loss premium cable with PL-259 connector

The Ubiquiti 60 GHz precision alignment mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align..Mount kit enhances mounting flexibility and device alignment.Supports airFiber (AF60) and airMAX (GBE-LR) products.Quick and easy installation

Tram presents the 3 1/4" Magnet with NMO Mounting, 17ft Cable with PL-259. This well-designed magnet antenna improves signal. Its premium components add to the functionality and durability of the antenna to deliver the communication you depend on..NMO mount with gold-plated contact pin.Installed PL-259 male connector.17ft low loss RG-58 A/U coaxial cable with tinned copper braid 95%, solid insulation & stranded tinned copper center conductor