Architect Measuring Tools

This 18" stainless steel ruler has a cork bottom to provide a clean raised edge. Stainless steel will last a lifetime, and won't get pitted and worn on the edge like plastic rulers. Includes both standard and metric measurement units. Sold as a pack of 6 rulers..Stainless Steel Ruler.Includes Imperial & Metric Scales.Measures 18".Silver.Sold as Pack of 6

General® Rigid precision ruler measures 6" x 3/4" and has permanent, deeply etched black markings for accurate measurements. Ruler features graduations of 1/8ths, 1/16ths 1/32nds, 1/64ths and ultra fine black etched graduations..Length: 6 in.Width: 3/4 in.Number of scales: 4.Measuring system: Inch.Graduations: 1/8Ths, 1/16ths; 1/32nds, 1/64ths.Ultra fine black etched graduations.⚠ WARNING: This product can expose you to Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.General® 6 in (L) SS 8ths 16ths And 32nds 64ths Inch Rigid Precision Ruler comes with ultra fine black etched graduations.

Ridgid® Outside reading folding rule is made of heavy duty fiberglass for durability and measures 6" x 5/8". Rule features graduations with red 16" stud marks for easy reading and positive locking joints..Type: Outside Reading.Length: 6 ft..Width: 5/8 in.Measuring system: Inch.Material: Fiberglass.Precision made of flexible heavy-duty fiberglass with embedded, easy-to-read boldface figures and graduations with red 16 in stud marks and positive locking joints.Weight: 7 oz..Length: 6 ft.Weight: 7 oz.Ridgid® Folding Rule is precision made of flexible heavy-duty fiberglass.

Komelon DW12 Series 4" dia feet/inches twin measuring wheel is ideal to use on hard indoor or outdoor surfaces. Wheel provides stable and accurate measurements..Measuring wheel.Dual 4"(Dia.) wheels.Measures in feet/inches.Its 5 digit counter measures up to 10,000 units.Equipped with a telescopic aluminum handle.Durable twin wheels for stable and accurate measuring on hard indoor and outdoor surfaces.Komelon DW12 Series 4" dia feet/inches twin measuring wheel has a 5 digit counter that measures up to 10000 units and features a telescopic aluminum handle.

Section off lengths of metal conduit with this Komelon Monster MagGrip Pro tape measure. The magnetic dual end hook on the tape provides good gripping power on metal surfaces for one-person use, and the nylon-coated blade is printed on both sides for easy, precise marking. This 30-foot Komelon Monster MagGrip Pro tape measure comes in a rubberized impact-resistant case that's ideal for busy industrial environments..Blade length: 30'.Impact-resistant rubberized black/green case protects end hook and button.Measurement gradients: inches.Has a thumb latch lock to keep measuring tape from rolling back into case during use.Blade width: 1".Magnetic dual-end hook allows for easier one-person measurement.Nylon coated blade with double-sided printing provides precise marking and line drawing.The perfect tape for anyone working with or around metal.Measure steel framing on your own with this 30-foot Komelon Monster MagGrip Pro tape.

Acme Westcott® Magnifying ruler is made with durable scratch resistant plastic and is perfect for home, office or school use. Ruler measures 12" and is scaled in metric, 1/16th scales to ensure correct scale..Clear and transparent.Scaled in 1/16ths and metric.12" length.Flexible.Scratch resistant.For the student…for anyone….for all of your needs.Westcott has been a trusted name in rulers since 1872.Numerals and graduations are sharply delineated.Edges are straight and true.We work carefully everyday to make sure our products measure up.These 12" clear plastic rulers really measure up for school, home or office use.Length: 12".1/16th of an inch on one side, millimeters/centimeters on the other.Clear plastic.Acme Westcott® Magnifying ruler is 12" long and comes with sharply delineated numerals, graduations for precise measurements.

Produce professional-quality engineering and architectural drafts with this gray-and-silver T-square. The metric and imperial rulings offer accurate measurements and quick conversion, while the aluminum construction provides good heft and lasting durability. Use the elevated sides on the ruler to control and guide your pencil in drawing quick and straight lines. This Staedtler Mars 24-inch T-square features a calibrated blade for longevity and wear-free black etched gradation markings for easy reading..Aluminum T-square with a ruler and calibrated blade.Features metric (61cm) and imperial (24") scale ruler markings on the straight-edge blade.Dimensions: 27.75"H x 11.63"W x 0.5"D.Offers a true professional ruler scale for drafting, engineering, crafting, artwork, and architectural work.High-contrast black gradation markings are etched into the ruler body for easy reading and long-lasting life.Draw straight and true with elevated sides to brace and guide your pencil or pen.Lifetime manufacturer limited warranty.Draw precise lines with this Staedtler Mars 24-inch T-square.

Mutual Industries Komelon® 45 Series Measure wheel has folding handle with comfortable pistol grip for user convenience and its 5 digit counter measures up to 10000 units. Wheel has a composite tread to help improve traction on smoother surfaces..Measure wheel.14.3"(Dia.).Material: Aluminum handle.Measures in feet/inches.Gear driven counter with push button reset and spring loaded kickstand.Its 5 digit counter measures up to 10,000 units.Folding handle with comfortable pistol grip.Diameter wheel is perfect for almost any outdoor use.Has a composite tread to help improve traction on smoother surfaces.Mutual Industries Komelon® 45 Series Measure wheel is suitable for almost any outdoor use and features a 14.3" dia wheel with spring loaded kickstand, gear driven counter with push button reset.

Staedtler® Geomaster compass features precision spring bow head and center wheel that offers precision setting as well as prevents unintended setting adjustments. Metal compass offers to draw up to 8 7/8" circle..Drafting type: Geomaster compass.Maximum circle drawn: 8 7/8".Material: Metal.Metal compass with precision springbow head.Center wheel offers precision setting and prevents unintended setting adjustments.Includes a spare parts tube with one replacement lead.This precision spring-bow compass features a sturdy, lightweight bow that's easy to use.The attachments lock firmly into compass leads to hold them steady.Made of brass and fiberglass-reinforced polyester for extra durability.Includes a plastic wallet to protect pockets and backpacks.Plastic storage wallet included.

Komelon® USA Series 60 Measuring wheel measures 19" Dia and has 7 digit gear driven counter that measures up to 10000'. Measuring wheel with magnifying lens has flexible twist/lock handle and pistol grip for added comfort..Diameter: 19-inch.Handle type: Pistol Grip, High Visibility Green.Measuring system: Feet/Inch.Gear driven counter with push button reset and spring loaded kickstand.Adjustable twist and lock handle with comfortable pistol grip.7 digit counter reads up to 10,000 Feet.Polyvinyl tread for improved traction.Magnifying lens for improved readability.Komelon® USA Measuring Trundle Wheel: For surveying a property or putting up a fence, the MK6012 is the right choice.

Komelon® USA Series 31 Measuring wheel measures 10" Dia and has 5 digit gear driven counter that measures up to 10000'. Measuring wheel with magnifying lens for enhanced readability features flexible twist/lock handle, pistol grip for added comfort..Diameter: 10-inch.Handle type: Pistol Grip, High Visibility Green.Measuring system: Feet/Inch.Gear driven counter with push button reset and spring loaded kickstand.Adjustable twist and lock handle with comfortable pistol grip.5 digit counter reads up to 10,000 Feet.Polyvinyl tread for improved traction.Magnifying lens for improved readability.10" diameter.Measures in feet/inches.Accurate gear driven counter with push button reset.Made in USA.Komelon® USA Measuring Wheel has magnifying lens for improved readability. 5 Digit counter reads up to 10,000 feet.

Komelon 31 Series 10" dia feet/inch measuring wheel has a composite thread for enhanced traction on smooth indoor surfaces and is used for outside use. Wheel has a gear driven counter with a push button reset and the handle offers pistol grip..Measuring wheel.10"(Dia.) wheels.Measures in feet/inches.Its 5 digit counter measures up to 10,000 units.Equipped with a telescopic aluminum handle.Gear driven counter with push button reset and spring loaded kickstand.Folding handle with comfortable pistol grip.Durable enough for outdoor use and has a composite tread that provides improved traction on smooth indoor surface.Wheels are great for athletic and rec. departments, concrete and asphalt contactors, estimators, grounds maintenance crews, and surveyors.Komelon 31 Series 10" dia feet/inch measuring wheel with a kickstand has a 5 digit counter that measures up to 10000 units and features a telescopic aluminum handle.

Powerlock® Single side measuring tape features 12' x 1/2" blade that is made of durable Mylar® polyester material for long service life. Inch/decimal tape with double-duty tru-zero hook comes in a convenient ABS case that resists rough handling..Blade length: 12 ft.Blade width: 1/2 in.Blade finish: Mylar® polyester.Case size: 1 in height x 3 1/2 in width x 5.8 in length.Case material: Zinc.Die-cast metal case holds its own against rough handling.Entire blade coated with heavy-duty Mylar® polyester film for unbeatable durability.Two-rivet, corrosion-resistant hook stands up to continuous use.Special tru-zero hook does double-duty as a pivot for drawing circles and arcs and positive blade lock will not creep while taking measurements.Heat treated spring for longer life and 32-211 replacement blade.32-211 replacement blade.Powerlock® Mylar® Polyester Single Side Measuring Tape comes with corrosion-resistant hook stands up for continuous use.

Komelon® USA Series 12 Measuring wheel measures 4" Dia and has 8 digit gear driven counter that measures up to 10000'. Measuring wheel with magnifying lens has flexible twist/lock handle and pistol grip for added comfort..Measuring range: 0-10000 Feet.Diameter: 4-inch.Handle type: High Visibility Green.Measuring system: Feet/Tenths.Accurate gear driven counter with push button reset.Adjustable twist and lock handle.8 digit counter reads up to 10,000 Feet.Polyvinyl tread for improved traction.Magnifying lens for improved readability.Made in USA.Komelon® USA Measuring Trundle Wheel: For decorating a room on the weekend or measuring a space to sell, this wheel is the one you need.

Each set includes 1 Ball Bearing Compass which creates accurate circles up to 12" in diameter. Features positive pencil lock. Complete with pencil, inch and centimeter guide. Each set also has a 6" Clear plastic protractor. Sold as a pack of 12 Compass/Protractor sets..Get all your drafting tools in this nifty set!.Ball Bearing Compass creates accurate circles up to 12" in diameter..Features positive pencil lock..Complete with pencil, inch and centimeter guide

This meter stick folds into fourths on three hinges for easy storage. Calibrated in U.S. Standard and Metric. Sold as 3 folding meter sticks..Color: Yellow; Material: Plastic.Scale: 1:1.LEARN METRIC AND IMPERIAL -- This meter stick will measure 1 meter in inches, centimeters, millimeters and meters! Students can use this foldable ruler to understand the relationships between these units..COMPACT DESIGN -- This meter stick folds four times for easy storage and portability. Easily store them in backpacks, drawers, desks and more..USE FOR MEASUREMENT AND CREATIVITY -- Use this meter ruler to practice measurement concepts. It's also perfect for a variety of activities like drafting, designing, craft projects and more!.DURABLE MATERIAL -- Made from durable plastic, this foldable ruler is designed to last for years of home or classroom use. Keep one with your teaching or homeschool supplies.

Alumicolor's solid aluminum drafting scales are the ultimate for accurate, professional use. Satin-smooth anodized aluminum scales are a pleasure to use. Alumicolor's scales are truly professional with the full six scales on each one and ultra smooth, mark resistant surface.The Engineer scales have the following calibrations: 10, 20, 30, 40, 50, 60 parts to the inch.Each scale measures 12 in. in length..Satin-smooth anodized aluminum scales are a pleasure to use.Alumicolor's scales are truly professional with the full six scales on each one and ultra smooth, mark resistant surface.The Engineer scales have the following calibrations: 10, 20, 30, 40, 50, 60 parts to the inch.Each scale measures 12 in. in length.color: gold

Powerlock® Single side measuring tape features 12' x 1/2" blade that is made of durable Mylar® polyester material for long service life. Inch tape with double-duty tru-zero hook comes in a convenient ABS case that resists rough handling..Blade length: 12 ft.Blade width: 1/2 in.Blade finish: Mylar® polyester.Case size: 1.1 in height x 3 1/2 in width x 5.8 in length.Case material: ABS.Die-cast metal case holds its own against rough handling.Entire blade coated with heavy-duty Mylar® polyester film for unbeatable durability.Two-rivet, corrosion-resistant hook stands up to continuous use.Special tru-zero hook does double-duty as a pivot for drawing circles and arcs and positive blade lock will not creep while taking measurements.Heat treated spring for longer life and 32-211 replacement blade.32-211 replacement blade.Powerlock® Mylar® Polyester Single Side Measuring Tape comes with corrosion-resistant hook stands up for continuous use.

50''(L) x 1/2"(W) engineer''s Hi-Viz orange linear fiberglass tape features lightweight high impact ABS winding drum for smooth tape recovery..Size: 50'(L) x 1/2"(W).Material: Fiberglass.Non-conductive, easy-to-read black, red markings, yellow background.Blade style: C2.Case color: Orange.Replacement blade: O703D

Stanley® Polymer coated single side measuring tape features 26' x 1" high-contrast blade for easy readability. Inch/metric tape is provided with three-rivet, corrosion-resistant hook that moves to allow accurate inside/outside measurements..Blade length: 26 ft.Blade finish: Polymer coated.Case size: 4.3 in width X 6.2 in length.Case material: ABS.7 ft standout.1/2 in, 3/4 in and 1 in blade widths.High-contrast blade for easy readability.High-impact, high-visibility yellow case stands.Three-rivet, corrosion-resistant hook moves to allow accurate inside/outside measurements.Stanley® Polymer Coated Single Side Measuring Tape comes with corrosion-resistant hook that moves to allow accurate inside/outside measurements.

Powerlock® Single side measuring tape features 12' x 3/4" blade that is made of durable Mylar® polyester material for long service life. Tape with double-duty tru-zero hook comes in a convenient ABS case that resists rough handling..Blade length: 12 ft.Blade width: 3/4 in.Blade finish: Mylar® polyester.Case size: 1.1 in height x 3.9 in width x 5.9 in length.Case material: Zinc.Die-cast metal case holds its own against rough handling.Entire blade coated with heavy-duty Mylar® polyester film for unbeatable durability.Two-rivet, corrosion-resistant hook stands up to continuous use.Special tru-zero hook does double-duty as a pivot for drawing circles and arcs and positive blade lock will not creep while taking measurements.Heat treated spring for longer life and 32-211 replacement blade.31-616 replacement blade.Powerlock® Mylar® Polyester Single Side Measuring Tape comes with corrosion-resistant hook stands up for continuous use.

Powerlock® Single side measuring tape features 16' x 3/4" blade that is made of durable Mylar® polyester for long service life. Inch/metric tape with double-duty tru-zero hook comes in a convenient case that has a belt clip for easy accessibility..Blade length: 16 ft.Blade width: 3/4 in.Blade finish: Mylar® polyester.Case size: 1 1/2 in height x 4 1/2 in width x 6.9 in length.Entire blade coated with Mylar® polyester film for added durability.Heat-treated spring stands up to repeated usage.Positive blade lock won’t creep during measurements.Belt clip on back of case assures effortless accessibility.Special tru-zero hook does double-duty as a pivot for drawing circles and arcs and has 32-616 replacement blade.Powerlock® Mylar® Polyester Single Side Measuring Tape comes with belt clip on back of case to assure effortless accessibility.

Alumicolor's solid aluminum drafting scales are the ultimate for accurate, professional use. Satin-smooth anodized aluminum scales are a pleasure to use. Alumicolor's scales are truly professional with the full six scales on each one and ultra smooth, mark resistant surface.The Engineer scales have the following calibrations: 10, 20, 30, 40, 50, 60 parts to the inch.Each scale measures 12 in. in length..Satin-smooth anodized aluminum scales are a pleasure to use.Alumicolor's scales are truly professional with the full six scales on each one and ultra smooth, mark resistant surface.The Engineer scales have the following calibrations: 10, 20, 30, 40, 50, 60 parts to the inch.Each scale measures 12 in. in length.color: silver

Powerlock® Single side measuring tape features 16' x 3/4" blade that is provided with Mylar® polyester finish for enhanced strength. Tape with belt clip on back has special tru-zero hook that perform double-duty as a pivot for drawing circles/arcs..Blade length: 16 ft.Blade width: 3/4 in.Blade finish: Mylar® polyester.Case size: 1 1/2 in height x 4 1/2 in width x 6.9 in length.Case material: ABS.Entire blade coated with Mylar® polyester film for added durability.Heat-treated spring stands up to repeated usage.Positive blade lock won’t creep during measurements.Belt clip on back of case assures effortless accessibility.Special tru-zero hook does double-duty as a pivot for drawing circles and arcs and has 32-616 replacement blade.32-616 replacement blade.Powerlock® Mylar® Polyester Single Side Measuring Tape comes with belt clip on back of case to assure effortless accessibility.

Powerlock® Single side measuring tape features 12' x 1/2" blade that is made of durable Mylar® polyester material for long service life. Inch/metric tape with double-duty tru-zero hook comes in a convenient ABS case that resists rough handling..Blade length: 12 ft.Blade width: 1/2 in.Blade finish: Mylar® polyester.Case size: 1.1 in height x 3 1/2 in width x 5.8 in length.Case material: ABS.Die-cast metal case holds its own against rough handling.Entire blade coated with heavy-duty Mylar® polyester film for unbeatable durability.Two-rivet, corrosion-resistant hook stands up to continuous use.Special tru-zero hook does double-duty as a pivot for drawing circles and arcs and positive blade lock will not creep while taking measurements.Heat treated spring for longer life and 32-211 replacement blade.32-211 replacement blade.Powerlock® Mylar® Polyester Single Side Measuring Tape comes with corrosion-resistant hook stands up for continuous use.

Stanley® Long measuring tape features 50' x 3/8" blade that is made of steel material with polymer coating for increased durability. Easy-to-read tape with easy-wind drum comes in a high-impact, high-visibility yellow ABS case..Blade length: 50 ft.Blade width: 3/8 in.Blade thickness: 0.004 in.Blade material: Steel.Blade finish: Polymer coated.3/8 in (10mm) wide yellow blade coated with polymer for enhanced durability.High-impact, high-visibility yellow ABS case houses thick, steel blade with easy-to-read markings.Easy-wind drum ensures streamlined usage.End hook recoils neatly into contoured case.Stanley® Polymer Coated Steel Long Measuring Tape consists of a high-impact, high-visibility yellow ABS case having a thick, steel blade with easy-to-read markings.

KOMELON® Professional series measuring tape features 12' x 5/8" blade that is made of steel material with nylon finish for enhanced durability. Tape with built-in shock absorber and bottom blade protector has superior mechanism for smooth working..Blade length: 12 ft.Blade width: 5/8 in.Blade material: Steel.Blade finish: Nylon coated.Case material: Durable ABS.Heavy duty nylon coated blade for maximum durability.Built-in shock absorber to protect blade tip.Superior mechanism provide smooth operation.Bottom blade protector.KOMELON® Nylon Coated Steel Professional Series Measuring Tape is ergonomically designed to complete any job.

Stanley® Double side long measuring tape features 100' x 1/2" blade that is made of PVC material for easy cleaning and comes in a high-impact ABS case. Easy-to-read tape in a high-visibility color is easy to find in the toolbox or on the job site..Blade length: 100 ft.Blade width: 1/2 in.Blade material: PVC.Case size: 1.6 in height x 6.2 in width x 11.6 in length.Case material: ABS.1/2 in wide blade with easy-to-read markings for more accurate measurements.High-impact ABS case withstands rugged conditions.PVC blades allow tape to be wound wet and easily cleaned.High-visibility color makes it easy to find in the toolbox or on the job site.Increased number of fiberglass strands means less stretch and better accuracy.Rubber grip is designed with comfort in mind.Open reel.Blade length: 100 ft..Stanley® PVC Double Side Long Measuring Tape has increased number of fiberglass strands providing less stretch and better accuracy.

FatMax® Single side measuring tape features 30' x 1 1/4" blade that is made of steel material with Mylar® polyester, bladearmor™ finish for increased strength. Tape with top-forward blade lock has cushion grip that offers slip-resistant hold..Blade width: 1 1/4 in.Blade material: Steel.Blade finish: Mylar® polyester, bladearmor.Case size: 2.2 in height x 4.9 in width x 7.9 in length.11 ft. tape standout.BladeArmor coating on the first 6 in maximizes durability of hook end.Top-forward blade lock makes locking and unlocking a cinch.Cushion grip provides comfortable, slip-resistant hold.Specially designed hook grabs on side, top or bottom for versatility.11 ft tape standout.BladeArmor™ coating on the first 6 in maximizes durability of hook end.High-impact ABS case with rubber over mold is jobsite tough.16 in and 19.2 in stud center markings simplify framing jobs.FatMax® Mylar® Polyester Steel Single Side Measuring Tape is specially designed to hook grabs on side, top or bottom for versatility.

FatMax® Single side measuring tape features 35' x 1 1/4" blade that is made of steel material with Mylar® polyester, bladearmor™ finish for increased strength. Tape with top-forward blade lock has cushion grip that offers slip-resistant hold..Blade length: 35 ft.Blade width: 1 1/4 in.Blade material: Steel.Blade finish: Mylar® polyester, bladearmor™.Case size: 2.2 in height x 4.6 in width x 7.1 in length.11 ft tape standout.BladeArmor™ coating on the first 6 in maximizes durability of hook end.Top-forward blade lock makes locking and unlocking a cinch.Cushion grip provides comfortable, slip-resistant hold.Specially designed hook grabs on side, top or bottom for versatility.16 in and 19.2 in stud center markings simplify framing jobs.FatMax® Mylar® Measuring Tape is specially designed to hook grabs on side, top or bottom for versatility.

FatMax® Single side measuring tape features 25' x 1 1/4" blade that is made of steel material with Mylar® polyester, bladearmor™ finish for increased strength. Tape with top-forward blade lock has cushion grip that offers slip-resistant hold..Blade length: 25 ft.Blade width: 1 1/4 in.Blade material: Steel.Case size: 2.2 in height x 4.6 in width x 7 1/2 in length.BladeArmor™ coating on the first 6 in maximizes durability of hook end.Top-forward blade lock makes locking and unlocking a cinch.Cushion grip provides comfortable, slip-resistant hold.Specially designed hook grabs on side, top or bottom for versatility.High-impact ABS case with rubber over mold is jobsite tough.16 in and 19.2 in stud center markings simplify framing jobs.Blade finish: Mylar® polyester, bladearmor.11 ft. tape standout.FatMax® Mylar® Polyester Steel Single Side Measuring Tape is specially designed to hook grabs on side, top or bottom for versatility.

The Staedtler 18" ruler in silver color, has high-quality stainless steel construction for durability. The ruler with acid-etched and color-coded graduations for user convenience, is suitable to cut paper. It has cork backing that prevents slipping and raises ruler from work surface to eliminate ink smearing..Color: Silver, Material: Stainless steel.Size: 18".High-quality stainless steel construction is perfect to cut paper and measurement.18" Silver stainless steel ruler.

Lufkin® Series 700 power return measuring tape features 25' x 1" A5 blade that is made of durable steel with yellow clad finish. Tape with non-slip co-molded rubber grip is use for one-man measurements of steel framing and drop ceiling grids..Blade style: A5.Blade width: 1 in.Blade material: Steel.Blade finish: Yellow clad.Use for one-man measurements of steel framing and drop ceiling grids.Powerful dual magnets can also serve as a pick-up tool.Non-slip co-molded rubber grip; Non-slip rubber blade lock button.Durable ABS case stands up to the toughest work site.Magnetic end hook is a time-saver for framers, HVAC installers, and more.Non-slip co-molded rubber grip.Non-slip rubber blade lock button.Blade length: 25 ft..Lufkin® A5 Yellow Clad Steel Power Return Series 700 Measuring Tape has a magnetic end hook with a time-saver for framers.

MagGrip™ Pro series measuring tape features 25' x 1" blade that is made of steel material with nylon coating for enhanced durability. Tape has double sided printing for accurate measurement and comes in a rubberized case for convenience..Blade width: 1 in.Blade material: Steel.Blade finish: Nylon coated.Case material: Rubberized.Nylon coated blade with double sided printing.Blade length: 25 ft..MagGrip™ Measuring Tape has double sided printing to provide precise marking, and the monster MagGrip's blade is nylon coated for maximum durability.

KOMELON® Professional series measuring tape features 16' x 3/4" blade that is made of steel material with nylon finish for enhanced durability. Tape with built-in shock absorber and bottom blade protector has superior mechanism for smooth working..Blade length: 16 ft.Blade width: 3/4 in.Blade material: Steel.Blade finish: Nylon coated.Case material: Durable ABS.Heavy duty nylon coated blade for maximum durability.Built-in shock absorber to protect blade tip.Superior mechanism provide smooth operation.Bottom blade protector.KOMELON® Nylon Coated Steel Professional Series Measuring Tape is ergonomically designed to complete any job.

Lufkin® Single side measuring tape features 100' x 1/2" C2 blade that is made of durable fiberglass with yellow clad finish. Tape with open four-arm frame design comes in a lightweight, strong case and has folding end hook for true-zero measurements..Blade style: C2.Blade width: 1/2 in.Blade material: Fiberglass.Blade finish: Yellow clad.Open four-arm frame design protects blade, does not trap dirt in case.Lightweight but strong case is easy to handle and rewind.Two-material grip is comfortable to use.Engineer fts blade.Folding end hook for true-zero measurments.Yellow clad fiberglass blade impervious to moisture.O706D replacement blade.Blade length: 100 ft..Lufkin® C2 Yellow Clad Fiberglass Single Side Measuring Tape is lightweight but has a strong case, which is easy to handle and rewind.

Stanley® Double side long measuring tape features 200' x 1/2" blade that is made of PVC material for easy cleaning and comes in a high-impact ABS case. Easy-to-read tape in a high-visibility color is easy to find in the toolbox or on the job site..Blade length: 200 ft.Blade width: 1/2 in.Blade material: PVC.Case size: 1 1/2 in height x 8 1/2 in width x 13 1/2 in length.Case material: ABS.1/2 in wide blade with easy-to-read markings for more accurate measurements.High-impact ABS case withstands rugged conditions.PVC blades allow tape to be wound wet and easily cleaned.High-visibility color makes it easy to find in the toolbox or on the job site.Increased number of fiberglass strands means less stretch and better accuracy.Rubber grip is designed with comfort in mind.Stanley® PVC Double Side Long Measuring Tape has increased number of fiberglass strands providing less stretch and better accuracy.

Alumicolor Straight Edges with Center Finding Backs are really two rulers in one. The front side of each is calibrated in inches and millimeters while the back side has center finding calibrations in inches. They have ultra smooth edges and photo anodized calibrations that resist cleaning or rubbing off.These are excellent, low priced, yet high quality rulers for every day use. They are made of sturdy, rigid aluminum and are 36 in. long x 1 1/4 in. wide x 1/8 in. thick..Front side is calibrated in inches and millimeters.Back side features center finding calibrations in inches.Ultra smooth edges.Photo anodized calibrations resists cleaning and rubbing off.Made of sturdy, rigid aluminum.36 in. long x 1 1/4 in. wide x 1/8 in. thick.color: silver

Lufkin® Single side measuring tape features 200' x 1/2" C1 blade that is made of durable fiberglass with yellow clad finish. Tape with open four-arm frame design comes in a lightweight, strong case and has folding end hook for true-zero measurements..Blade style: C1.Blade length: 200 ft.Blade width: 1/2 in.Blade material: Fiberglass.Blade finish: Yellow clad.Open four-arm frame design protects blade, does not trap dirt in case.Lightweight but strong case is easy to handle and rewind.Two-material grip is comfortable to use.Folding end hook for true-zero measurements.Yellow clad fiberglass blade impervious to moisture.Numbered feet and instantaneous feet.O1708 replacement blade.Lufkin® C1 Yellow Clad Fiberglass Single Side Measuring Tape has an open four-arm frame designed to protect the blade and prevent dirt from getting trapped in the case.