Black Industrial Racks
56 results
Combine style and function with this sturdy, heavy-duty 6-foot-tall storage unit. It is NSF International-certified to safely hold food and water. Each woven-wire shelf of this Whalen shelving unit holds up to 200 pounds and is coated with a sturdy rust-resistant finish..Shelf unit offers plenty of storage space for any office, garage, or utility room.Made of steel with durable black epoxy finish that resists rust, chips, and corrosion, while wire construction provides adequate air flow and high visibility of stored goods from every side.Four shelves adjust in 1" intervals allowing you to change the configuration as your storage needs evolve.Holds up to 200 lbs. per shelf evenly distributed.Dimensions: 72"H x 48"W x 18"D.Snap-together assembly — no tools required.Floor-leveling feet with protective plastic pads provide stability.Meets or exceeds NSF International standard.Increase space for stock with this 48-inch-wide black Whalen wire 4-shelf storage unit.
The Tripp Lite SmartRack expandable low-profile open-frame rack with 150 lbs. load capacity, secures and organizes 19U of 19" rack equipment up to 23.5" deep in locations with limited floor space. The pivoting, 2-post open-frame design provides convenient access for installing, configuring and servicing equipment and cabling from any direction. Heavy-duty steel with black powder-coated finish provides durability. It is suitable for setting up UPS systems, battery packs, network switches and patch panels in secure IT areas. The open-frame design helps to configure this rack to 8U, 12U or 22U to meet current needs. Rack comes with assembly and equipment-mounting hardware for easy installation..Rack height: 8U, 12U, 22U.Weight capacity: 150 lbs..Dimensions: 17.8" (8U), 24.8" (12U), 42.3" (22U)H x 20.11"W x 24"D.Device depth: 23.5".Perfect for installing UPS systems, battery packs, network switches and patch panels in secure IT areas with limited floor space.Expands to add equipment later without buying a bigger rack.Offers easy access for organizing, installing and servicing equipment and cabling.Heavy-duty steel construction with a black powder-coated finish offers added durability.Easy to assemble with included hardware.Vertical mounting rails with threaded 12-24 holes.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Contains 24 x 12-24 mounting screws, 16 x M5 button-head cap screws, eight M6 x 12 Phillips-head screws, two short vertical mounting rails.Meets EIA-310-D, IEC 60297-3-100, RoHS certifications and standards.Weight: 8U = 13.03 lbs., 12U = 14.04 lbs., 22U = 16.87 lbs..Comes with 5 years limited warranty
Organize supplies with this heavy-duty shelving. The adjustable shelves let you adapt to changing storage needs, and the open-wire design promotes air circulation to minimize dust build-up on stored items. The unit's welded-wire construction supports up to 1000 pounds per shelf for secure storage of heavy supplies and equipment. This Alera wire shelving starter set snaps together for quick assembly and can be constructed as a single four-tier rack or two double-tier racks for a custom setup..Shelf rack offers plenty of storage space for any office, garage, or utility room.Heavy-duty metal welded construction comes in black.Four adjustable shelves.Holds up to 1000 lbs. per shelf when the weight is evenly distributed.Dimensions: 72"H x 48"W x 24"D.Snap-together design assembles in minutes.Meets or exceeds NSF standard.Shelving adjusts in 1" increments.Meets or exceeds ANSI/BIFMA Standards.5-year manufacturer limited warranty.Create vertical storage with this 72-inch-high Alera black industrial wire shelving starter set.
Bring fashion and functionality with the 4-tier simple sleek storage shelf that blends in wherever it is placed, whether in the garage or in the closet. The IRIS USA shelving unit is made with durable resin and can withhold up to 100lbs per shelf with a total weight capacity of 400lbs. With plenty of space on each shelf, the storage shelf is perfect for storing items whether light or heavy. The storage shelf can be assembled easily by simply interconnecting the shelves and connecting bars together without any tools..100 lbs. per shelf / 400 lbs. entire unit.Easy to assemble and clean.Sturdy and Durable.4 Durable Shelves.Made in the USA.Whether in the garage, or in the home, use the convenient shelving unit to store storage boxes, gardening tools, clothes, books, or use as a plant shelf.
Strong welded construction with open wire design.Durable black powder-coat finish resists wear and tear.Supports up to 1250 lbs. per shelf.Shelves adjust in 1" increments.Adjustable leveling feet with plastic caps to protect floors.Easy assembly - no tools required.Safco® Limited Lifetime Warranty.Starter kits for 72"H industrial shelving include 4 wire shelves and 4 posts.Adjustable leveling feet with plastic caps.Assembly required, no tools needed.Holds up to 800 lbs per shelf; total weight capacity per unit is 2,500 lbs., evenly distributed.Size: 48Wx24"D
The Tripp Lite SmartRack low-profile switch-depth rack enclosure cabinet with 200 lbs load capacity, stores and organizes 12U of 19" rack equipment up to 16.5" deep in locations with limited floor space. This cabinet has clear acrylic window that lets you monitor equipment without unlocking the door. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for use in network closets, retail outlets, warehouses, offices, classrooms and other locations. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Has steel construction for durability.Form factor: Wall mountable.Comes in black powder coat color.Dimensions: 25.1"(H) x 23.6"(W) x 17.7"(D), 12U(H) x 19"(W) x 16.5"(D) rack.Device depth: 7.62 cm - 41.9 cm.Maximum load capacity: 200 lbs..Grounding lug: Front and back door frames.Front door has shatter-resistant clear acrylic window and locking steel cabinet with sides, top as well as bottom ventilation.Ideal for network wiring closets, retail locations, classrooms and back offices space.Allows you to monitor equipment without unlocking the enclosure and prevents equipment tampering.Front door and side panels lock securely to prevent damage, tampering or theft and vented panels let generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible front door left or right & convenient ports allow cable routing through top/bottom.Has rails that support square-hole or threaded-hole mounting and rack spaces come numbered for easy reference.Includes M6 screws, M6 cage nuts, M6 cup washers, 12-24 screws, removable mounting plate, mounting plate screws, keys and owner's manual.Meets UL/CSA 60950-1, EIA-310-E, Tested to NOM and RoHS certifications or standards.Weight: 22 kg.Comes with 5 years limited warranty
The APC NetShelter SX Enclosure with Roof and Sides - Rack - 24U is perfect for everyday use..Rack enclosure cabinet is perfect for server/LAN switch/PDU.Dimensions: 47.19"H x 23.62"W x 42.13"D.Compatible with NetShelter SX enclosure.Comes in black color.Weight capacity: 2250 lbs. (dynamic load), 3000 lbs. (static load).Rack height: 24U.Door material gauge: 18, rail material gauge: 14, roof/top material gauge: 18, side panel material gauge: 18.APC cooling, power distribution and cable management products work seamlessly with the enclosures to provide IT infrastructure support system.Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment.Perforated front & rear doors provide ample ventilation for servers & networking equipment, split rear doors improve access & serviceability.Front door can be moved to the opposite side or interchanged with rear doors, doors are easily removed with simple lift-off design.Half-height quick release side panels reduce size & weight for easy handling & access to equipment.Includes rack cabinet, baying hardware, documentation CD, doors, installation guide, doors and side panels with identical lock, leveling feet.Meets UL 60950, EIA-310-D, RoHS standards.Weight: 196 lbs..Comes with 5 year warranty
Heavy-duty cold-rolled steel rack mount with textured powder coat finish..Material: Cold-rolled steel (CRS).Rack size: 25U.Black.Dimensions: 49.3"(H) x 20.2"(W) x 22 - 39.3"(D).Supports 1000 lbs. of rackmount equipment.Adjustable mounting depth (22 to 39 inches).Textured powder coat finish.Heavy-duty cold-rolled steel.Bolt down provisions, self squaring design.Numbered mounting positions.Weight capacity - stationary: 1000 lbs..Grounding lug: Included screws, nuts, and washers secure user-supplied grounding wire to front or back frames, installed whole system maximum rack depth: 39.3", installed whole system minimum rack depth: 22.Certifications: NOM (Mexico): tested to NOM (Mexico), Approvals: EIA-310-D, IEC 60297-3-100, DIN 41494, RoHS.Weight: 45 lbs..Warranty: 5 years limited.Tripp Lite Smartrack rack frame is suitable for 19’’ rack mount applications and multiple units can be bolted together side by side.