C-Clamp Monitor Mounts

Raise your monitors to an ergonomic position and work more efficiently with this dual monitor mount. Designed for performance, this mount is made from high-strength steel for durability. Includes both clamp and grommet installation components to fit a variety of desks. The arms can be raised and lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop..Fits two displays from sizes 17 to 32 inches in size, with a maximum support weight of 22 pounds on each arm, using the 75x75mm or 100x100mm VESA square bolt holes pattern found on the back of the monitor. (measure distance, in millimeters, between bolt hole patterns if unsure of size).Constructed of heavy duty steel, integrated cable management clips keep your cables organized, comes with interchangeable C-clamp or grommet bases, and mounting plates are detachable for easy monitor mounting..Comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to your monitors, then re-attached to the stand in a few minutes for easy installation..Monitors can tilt up 90 degrees and down 90 degrees, swivel left and right 180 degrees at two different joints, and each screen can be rotated 360 degrees and held in portrait or landscape orientation independent of one another. Arm raises and lowers a total of 16 inches on the center pole..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Our full motion monitor arm mount helps you increase productivity and clear up extra space on your desk!

This dual monitor desk mount is a great addition to an ergonomic workspace, and provides the luxury of more desk room for other office essentials. Each VESA head bracket is compatible with 75mm x 75mm and 100mm x 100mm displays, and can hold 17.6 lbs. Swivel your monitors up to 180 degrees for portrait or landscape orientation, and tilt up or down 90 degrees. The cable management sleeves offer a clean, clutter-free look, while the two USB 3.0 ports, integrated into the base, are easily accessible for charging or data transfer..MI-2762 is compatible with 75mm x 75mm and 100mm x 100mm VESA patterns and can hold up to 17.6 lbs per monitor arm.Two integrated USB 3.0 port, and matching cables for each are hidden from view.Provides 11.5 inches of smooth height adjustment for optimal ergonomic positioning..Compatible with VESA 75x75 and 100x100 mounting patterns..Supports monitors weighing between 4.4 and 17.6 lbs. per arm..Offers 90° upward and 90° downward tilt for flexible viewing angles..Features 360° swivel at two joints and an additional 180° swivel at one joint for maximum adjustability..Allows full 360° rotation to easily switch between landscape and portrait orientations..Includes both C-clamp and grommet base installation options for versatile desk mounting..Comes with all required hardware and clear installation instructions for easy setup..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Adjustable dual Monitor Mount for Office, Home, and Classroom Use!

MI-1772 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Dual side-by-side monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitors independently to switch between landscape and portrait modes. By elevating your monitors above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture..Dual Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".Holds monitors up to 19.8 lbs. per arm.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Height Adjustable Full-Motion Articulating Desk Mount integrates fashion with function, delivering ergonomic performance with style.

Raise your monitors to an ergonomic position and free up desk space with this stackable dual monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. Screen Sizes: 17" - 32", VESA Compatible: 75x75, 100x100, Monitor Weight Capacity: 17.6 lbs. (per screen),Tilt: +35°~-35°, Swivel: +90°~-90°, Screen Rotation: +180°~-180°, Arm Extension: 19.5" - 21", and Material: Aluminum, Plastic, Steel..DUAL MONITOR ARM MOUNT DESK STAND: Fits two monitors up to 32" in size, with a maximum support weight of 17.6 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp (for desktops up to 3" inches thick) or grommet (up to 1.5" thick) base mounts..WELL-DESIGNED: Vertical monitor mount has counterbalanced, gas spring arms for effortless adjustments, and screens can be stacked in a vertical or horizontal configuration. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..FULLY ADJUSTABLE: Vertical dual monitor stand can tilt up and down 35 degrees in either direction, swivel left and right 360 degrees, and raise or lower a total of 14.2 inches. Monitors can be rotated 180 degrees for portrait or landscape orientation independent of each other..EASY INSTALLATION: Double monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas springs to set the counterbalance and hold screens in place..Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Boost Ergonomics & Desk Space with Our Dual Monitor Mount. Perfect for Home Offices, Professional Set ups, Commercial Set ups to name a few.

The MI-753XL triple monitor desk mount provides you with an ergonomic work station, where you can find any number of positions for your monitors. Tilt and orient your screen to help reduce glare and eye strain. Rotate easily between landscape and portrait orientation to suit your fluctuating work needs. The height-adjustable design allows you to turn your workspace into a sit-stand desk. Dual locking C-clamp ensures stability, reinforcing your mount and desk bond, and fits desks up to 4" thick. All necessary hardware and instruction guides are included..Raise your monitor to a comfortable viewing height with this triple-monitor desk mount.Supports most flat panel monitors from 13" up to 32" for versatile use.Made of heavy-duty steel and comes in black.90-degree tilt feature allows you to reduce glare and eyestrain.Weight capacity: 22 lbs. per arm.Compatible with VESA 75mm x 75mm and 100 x 100mm mounting patterns.Height-adjustable design allows you to turn your workspace into a sit-stand desk.360-degree independent plate rotation allows for easy setup for portrait and landscape orientation.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Achieve a Customizable, Ergonomic Workstation with our Triple Monitor Mount

Transform your workspace with the ProFlex Series Heavy-Duty Monitor Arm, designed for ultrawide and standard monitors from 17” to 49”. Built from high-strength steel and aluminum, this ergonomic monitor mount supports up to 44 lbs., ensuring a stable and secure hold for even the heaviest screens. The fully adjustable gas spring arm allows for seamless height adjustment, tilting, swiveling, and screen rotation, so you can achieve the perfect viewing angle for work, gaming, or multitasking. This premium desk mount features both C-clamp and grommet installation options, fitting most desks between 0.4” to 3.35” thick for a versatile, space-saving setup. The built-in USB 3.0 and USB-C ports provide convenient access for charging and connecting devices, reducing clutter and improving efficiency. Plus, the integrated cable management system keeps wires neatly organized for a clean, professional look. Ideal for professional workstations, home offices, and gaming setups, the ProFlex Series monitor arm delivers exceptional durability, smooth movement, and a modern matte black finish that enhances any workspace..This heavy-duty gas spring monitor arm securely holds one monitor and is designed to improve ergonomics and maximize workspace efficiency in home offices, gaming stations, and professional environments..Supports a single monitor from 17" to 49" ultrawide, accommodating displays up to 44 lbs. in weight..Features a height range of 10.5" to 21.65" for customized viewing comfort..Constructed from durable steel and aluminum with a sleek matte black finish for strength and style..Provides full-motion adjustability with +50°/-20° tilt, ±180° swivel, and ±180° screen rotation for optimal viewing flexibility..Includes integrated cable management channels to keep cords neatly organized and out of sight..Supports monitors weighing from 4.4 lbs. up to 44 lbs..The mount is Compatible with 75x75 and 100x100 mm VESA mounting patterns..Features integrated USB 3.0 and USB-C ports for quick charging and easy peripheral connectivity..Includes dual mounting options (C-clamp and grommet) to fit most desks for a secure, space-saving installation..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by Manufacturer's Limited Lifetime Warranty..Enhance your workspace with the Mount-It! ProFlex Heavy-Duty Monitor Arm, engineered for large ultrawide screens, effortless adjustability, and a clean, modern setup.

This LCD Monitor Pole with Double-Link Swing Arm provides a secure and elevated position for two flat-screen monitors to help free up valuable desk and work space. It's fully adjustable tilt, rotate, side-to-side, height, and tension settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. LCD monitors can be easily rotated around the pole to allow others to view presentations and other multimedia from almost any direction. Durable metal construction and a sturdy clamp provide a quick, easy, and secure mount to a desktop or other horizontal surface. Ready to install with included hardware, there's no need to drill holes into desks or countertops. Thus mount is made of high grade steel and aluminum. Fits most LCD monitors 13" to 27". Supports up to 22 lbs. per monitor. Every joint is able to be tightened, so you can adjust exactly how fluid/stationary you want everything, simply remove the cap on the joint and tighten the bolt underneath..Raise your monitor to a comfortable viewing height with this dual monitor desk mount.Supports up to 27" monitors for versatile use.Height-adjustable with two screws holding arms securely on pole.Sturdy aluminum construction features integrated clips and port for cable management.A +80/-80 degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable for optimal viewing.Each arm securely holds up to 22 lbs. to fit most monitors (44 lbs. total load on height-adjustment assembly).Compatible with the standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black finish completes overall aesthetic appeal.The C-clamp base has an integrated double lock to ensure stable mounting onto any surface up to 4" thick.Supported by manufacturer's limited lifetime warranty

Enhance your workspace with our full-motion dual monitor mount, designed to accommodate two monitors up to 32 inches and 17.6 lbs. each. Perfect for professionals and gamers alike, this mount features individual gas springs on each arm for effortless height adjustments, ensuring each screen is always at your ideal ergonomic viewing level. Enjoy the flexibility of full motion control with +90°/-45° tilt, +/-90° swivel, and a full 180° screen rotation, making it easy to share your screen with coworkers or adjust for optimal comfort during long work sessions. The integrated cable management system keeps your desk organized and clutter-free, supporting a more productive environment. Whether in a bustling office, a quiet home study, or a dynamic gaming setup, this mount's sturdy build ensures reliability and durability. Installation is a breeze with both clamp and grommet options included, fitting tabletops up to 1.97 inches thick. Maximize your desk space and your productivity with a setup that adapts to your needs, allowing you to work smarter, not harder..This is an adjustable dual monitor desk mount with built-in gas spring arms, designed for ergonomic positioning and increased productivity.Supports two monitors ranging from 13" to 32" in size, with one gas spring arm for each screen. Holds monitors up to 17.6 lbs. per arm.The height is adjustable from 6.3" to 16.34".The monitor mount is black in color and constructed from high-quality steel.Each arm offers full motion flexibility with a tilt range of +90° to -45°, swivel up to ±90°, and rotation up to ±180°, allowing for dynamic screen positioning and easy screen sharing..Compatible with 75x75mm and 100x100mm VESA mounting patterns..Integrated cable management keeps cords organized and out of sight, maintaining a neat and distraction-free workspace..Ideal for both home and professional use, this sturdy mount increases screen real estate and enhances ergonomic comfort for multitasking..Versatile installation with included clamp and grommet mounting options for a stable fit on any desk.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Upgrade Your Desk with a Dual Monitor Mount That Does It All!

Upgrade your workspace with this single monitor arm, designed to provide ergonomic positioning and free up valuable desk space. Unlike bulky built-in stands, this adjustable monitor mount lets you easily set your screen at the ideal height along its 16-inch pole, reducing neck and eye strain for a more comfortable workday. Enjoy full motion flexibility allowing you to find the perfect viewing angle whether you’re working, gaming, or multitasking. The VESA-compatible mount supports monitors up to 32 inches and 19.8 lbs., and its space-saving clamp or grommet base ensures a secure, clutter-free setup. Plus, integrated cable management keeps wires organized for a sleek, professional look..This is an adjustable monitor desk mount designed to support ergonomic screen positioning, and it includes both a C-clamp and grommet mounting base, as well as integrated cable management for a clean and efficient workspace..The mount supports one monitor ranging from 17" to 32" in size. Holds monitors up to 19.8 lbs..The screen can be mounted anywhere along the 16-inch vertical pole to achieve your desired ergonomic height..The item is available in black or white and is made of durable steel..It offers full motion adjustability, including ±160° swivel, +40°/-40° tilt, 360° screen rotation, and flexible pivot positioning to achieve an optimal viewing angle..This mount is VESA-compatible with both 75x75mm and 100x100mm patterns..The mount holds monitors up to 19.8 lbs., making it suitable for most standard and curved screens..Its dual mounting options (clamp or grommet) allow flexible installation on various desk types..Integrated cable management channels keep cords organized and out of sight, supporting a tidy, professional setup..Supported by Limited Lifetime Warranty.From home office to late-night gaming! This monitor arm keeps up with your lifestyle.

MI-1771 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture. The monitor arm is compatible with VESA patterns (100x100 mm and 75 x 75 mm). If your monitor has mounting holes in the back, this mount will work with it..Single Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".40 lbs. Capacity.10-year manufacturer limited warranty

Maximize the use and functionality of your monitor with this ultrawide single-monitor desk mount. Designed to securely hold a monitor or TV up to 42 inches in screen size and with a maximum load capacity of 22 lbs. Position your monitor at eye level for better posture while you work, and reduce neck, back, and shoulder pain. Installation only takes a matter of minutes, and can quickly convert your office or home into a productive workspace. The sleek finish on this mount will complement your surroundings and will last for years to come..Raise your monitor to a comfortable viewing height with this single-monitor desk mount.Pole height: 16.75"; base height: 3.75"; height adjustment: 14".VESA compatibility: 75mm x 75mm to 200mm x 200mm; compatible screen size: up to 42"; weight capacity: 22 lbs..Comes in black and made of heavy-duty construction.360-degree rotation makes the transition between portrait and landscape orientation much easier.Features 30-degree down/30-degree up tilt and 360-degree swivel.Organize your space with the cable management clip.Monitor mount is easy to install with both the C-clamp or included adapter for grommet slot.5-year manufacturer limited warranty

Our dual monitor mount with full range of motion allows you to tilt, swivel, and rotate the monitor from landscape to portrait position with ease. This dual monitor stand is perfect for cross-referencing work or running multiple programs, so you don't have to keep switching between computer applications. Quick and easy install with the secure clamp, or fixed mount with the included grommet..Raise your monitor to a comfortable viewing height with this monitor mount.Supports screens from 17" to 32" monitors for versatile use.Height adjusts from 8.5" to 19" for comfortable viewing.Made of aluminum, steel, and plastic.Tilt and swivel functions enable adjustments for comfortable viewing.Total weight capacity: 35.2 lbs. (17.6 lbs. per monitor).Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Switch Between Landscape and Portrait Modes Effortlessly, Our MI-2672 dual monitor Mount easily Adjust Your Monitor’s Height, Tilt, and Swivel for Perfect Viewing!

MI-43116 dual monitor mount features two full motion arms to create a more customized workspace. The extra long mounting pole measures 20.5”, allowing for a large height adjustment range. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. The heavy-duty aluminum construction is designed to withstand heavy-use and to withstand the test of time. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual Monitor Desk Mount fits most of 13" -27" Computer Screens.Gas Spring Arms have Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 345 degrees.Load capacity 39.6 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

MI-45111 dual monitor mount features two gas spring arms for smooth full motion monitor adjustments. The extra long mounting pole measures 20.5”, allowing for a large height adjustment range. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. It also includes a grommet base that securely attaches to a desktop hole opening. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual LCD Computer desk stand for 30" screens. 19.8lb load capacity per monitor.Height adjustable gas spring arm with 11.5" of height adjustability.Rotate portrait-to-landscape, pivot 360 degrees, and tilt 30 degrees.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Get the optimized viewing height of two displays with this adjustable mount that allows for monitors to be mounted in either portrait or landscape orientation. This stand delivers height and tilt adjustments and each mounted screen can swivel 180 degrees. Desk space is kept neat and tidy with the innovative cable management system of this Mount-It! dual monitor mount. This 2 monitor mount works with screens 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 inches in size, with a maximum support weight of 17.6 pounds each arm, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Two monitor stand has full motion, height adjustable arms that are made of heavy duty steel and have integrated cable management clips on each arm to keep your cables organized. Comes C-clamp base for use on desktops up to 3.5" inches thick. The double monitor mount arms can tilt up and down 15 degrees, swivel a full 360 degrees, raise and lower a total of 17" inches, and each screen can be placed in portrait or landscape orientation independent of one another..Raise your monitor to a comfortable viewing height with this dual monitor desk mount.Supports up to 27" monitors for versatile use.Heavy-duty cold-rolled steel construction with plastic elements that will outlast many screens to come.A +80/-80 degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable for optimal viewing.Each arm securely holds up to 17.5 lbs. to fit most monitors (35 lbs. total load on height-adjustment assembly).Dimensions: 17.25"H x 34"W (fully extended).Compatible with standard VESA mounting patterns: 75 x 75, 100 x 100.Meets VESA MIS-D mounting standard.Black finish completes overall aesthetic appeal.Single bolt with hex key provides 17" of height adjustment.C-clamps secure the mount to the edge of the desk without the need to drill.Comes with an integrated cable-management wire clips to keep your work area tidy.Supported by manufacturer's limited lifetime warranty

This single monitor mount features a gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to save desk space while improving posture by raising the monitor to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk up to 3” thick, making it an easy addition to any workspace. Fits monitors up to 32” with a weight capacity of 19.8lbs..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 19.8 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

MI-45116 dual monitor mount features two gas spring arms for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual Monitor Stand fits most of 13" -27" Computer Displays.Gas Spring Arms have Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 360 degrees.Load capacity 19.8 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) Compliant.Supported by manufacturer's limited lifetime warranty

Raise your monitor to an ergonomic position and free up desk space with this single monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop..Screen Size: 17" - 32".Monitor Weight Capacity: 17.6 lbs..Arm Extension: 19.5" - 21.5".Screen Rotation: +180°,-180°.VESA Compatible: 75x75, 100x100.Tilt: +35°,-35°.Swivel: +90°,-90°.Material: Aluminum, Plastic, Steel.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS1000 is designed to do exactly that. Combining industrial influences with a minimalist design, this gas shock monitor mount allows for finger-tip adjustments to be made to the height and orientation of your screen. Raise, tilt, swivel and rotate your monitor on the fly to ensure it’s always in an ideal position. The detachable base provides a seamless connection to your desk, while its easy-to-use clamping mechanism can be secured to any ledge or grommet hole up to 2 inches thick. To ensure a clutter-free setup, the DMS1000 also includes cable management clips to conveniently route your cables..Fits most flat panel computer monitors from 17” to 32”.Supports monitors weighing 3.3 lb (1.5 kg) to 16.5 lb (7.5 kg).Accommodates VESA sizes of 75x75 and 100x100.Ball joint provides a 25° viewing angle in any direction.360° of swivel and monitor rotation for vertical and horizontal screen orientation.Single arm provides up to 23.3” (59.3 cm) of reach.Adjustable tension gas shock system provides 9.5” (24 cm) of fingertip height adjustment.Integrated cable management.Aluminum construction with a painted finish.Installation manual and all monitor mounting hardware for either desk edge or grommet hole installation is included.Two year manufacturer's warranty.Not your average monitor mount.

Single Arm Monitor Mount VESA 75x75 100x100 Integrated Cable Management. Free up space while creating an ergonomic work environment. This desk-mount monitor arm makes it easy to securely mount and adjust a 17" to 34" display above your desk. Adjust Your Monitor for Ideal Viewing The single arm monitor mount extends up to 18.4" (467 mm) so it's easy to find the right viewing angle. Swivel your monitor +90/-90 degrees or tilt your screen +90/-90 degrees for comfortable viewing. You can even rotate it 90 degrees for landscape or portrait viewing. One-Touch Height Adjustment With up to 17.5" (445 mm) of height adjustment, the slim monitor-mount arm features a mechanical spring that makes it easy to raise or lower your display offering a toolless adjustable height range of 10.1". Adjust the tension according to the weight of your monitor for effortless movement. Easy Installation The VESA mount monitor stand is easy to install (desk C-clamp or grommet mount) and offers built-in cable management and dual USB 3.0 port passthrough for connecting your computer. The detachable VESA mount makes it simple to attach your monitor. The Choice of IT Pros Since 1985 StarTech.com conducts thorough compatibility and performance testing on all our products to ensure we are meeting or exceeding industry standards and providing high-quality products to IT Professionals. Our local StarTech.com Technical Advisors have broad product expertise and work directly with our StarTech.com Engineers to provide support for our customers both pre and post-sales. ARMSLIM2USB3 is backed by a 2-year StarTech.com warranty and free lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor mount.Supports up to 35" monitors for versatile use.Made of aluminum.Swivel and tilt functions enable adjustments for comfortable viewing.Weighs 6.3 lbs..Dimensions: 17.5"H x 4.53"W x 21.54"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

Find your best view, save desk space and discover your most productive self, thanks to the LX Desk Monitor Arm, Tall Pole. The sky is the limit with the taller pole, offering up more range above your work surface and increased visibility. Place your screen where you need it for each project, and then reclaim a space full of opportunities by folding the arm and pushing it aside during a much-needed screen break..Desk Component Type & Use: Monitor Arm, Tall Pole.Furnishing Material & Color: Metal, Black.Product Weight: 8.9 lbs.Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm).Mountable: Yes.Includes arm, extension, base, desk clamp, 13" pole, attachment hardware.10 years Warranty

Transform your workspace with our versatile single monitor mount, designed to support a broad range of screen sizes from 13" to 32". Ideal for enhancing your home office setup or professional workstations, this mount adjusts effortlessly to meet your needs. Whether you're gearing up for a marathon coding session, settling in for a long day of digital design, or configuring multiple displays for trading, it provides optimal positioning and comfort. This monitor desk mount comes a robust weight capacity of 17.6 lbs. and is compatible with 75x75 and 100x100 VESA mounting patterns, accommodating most monitor brands. Experience full motion control with tilt angles ranging from +90° to -45°, swivel adjustments of +/-90°, and a complete 180° screen rotation capability that allows you to switch from landscape to portrait orientation in a snap—perfect for any task that requires dynamic screen movement. Securely attaching to most desk types, it fits surfaces from 0.4" to 1.97" thick, ensuring a stable and reliable setup. Crafted from high-quality materials, the monitor mount is not only sturdy but also built to last, regardless of how often you adjust your setup. Additionally, the integrated cable management system keeps your workspace organized and free from clutter, allowing you to maintain a tidy and efficient home office environment. Whether for professional use in offices or for enhancing your home office ergonomics, this monitor mount delivers superior performance and adaptability..This is a Single monitor desk mount with gas spring arm for ergonomic positioning; includes C-clamp and grommet base for flexible installation. Ask ChatGPT.The mount is designed to support a broad range of screen sizes from 13" to 32". Holds monitors up to 17.6 lbs..The height can be adjusted smoothly along the arm from 6.3" to 16.43".The monitor mount is black in color and constructed from high-quality steel for long-lasting performance..Offers full motion articulation with a tilt range of +90° to -45°, swivel adjustments of ±90°, and screen rotation up to 180° for flexible viewing from any angle..Compatible with standard 75x75mm and 100x100mm VESA mounting patterns..An integrated cable management system keeps wires neatly organized and out of sight for a clutter-free workspace..Dual mounting options (clamp and grommet) provide a secure fit for a wide range of desk types..Ideal for both home and office use, this monitor mount offers reliable performance and ergonomic flexibility..Supported by Limited Lifetime Warranty.Smooth, Space-Saving Monitor Arm with Gas Spring Adjustment for Effortless Ergonomic Comfort!

MI-1772 Dual Monitor Desk Mount is compatible with screens up to 32" on each arm. Clear up desk space and raise your monitors off your desk with this dual monitor desk mount for desk. Full motion arms swivel, tilt, rotate and move up and down to position the monitors just right for you. The gas spring mechanism includes an adjustable counterbalance so that you can make fluid and easy height adjustments to your screen and position your displays in the optimum viewing position. Rotate your screens between portrait and landscape mode to suit your workflow needs. Cable management sleeves offer a clean, clutter-free look so you can utilize your desk space more efficiently. The dual base allows supports clamp or grommet installations..Fits 2 screens from 13" - 32" in size, with a maximum support weight of 20 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp or grommet base mount for use on desktops.Two monitor stand has counterbalanced, gas spring arms which make adjustments effortless. It has 2 quick-detachable VESA plates for easy mounting and removal of monitors. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..Dual monitor arms can tilt up and down 90 degrees, swivel left/right 180 degrees at two joins and a full 360 at another, and raise/lower a total of 13 inches. Both monitors can be rotated into portrait or landscape orientations with easy and will stay in place..Dual monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas spring arms to set the counterbalance and hold screens in place..Contemporary contours with a color scheme that will never go out of style.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.This monitor arm mount helps you increase productivity and clear up extra space on your desk.

Finding the correct ergonomic height for your monitors and adjusting their distance is easy, thanks to the sturdy and stable Kensington SmartFit Ergo dual extended monitor arm. Clear valuable desk space while improving ergonomics. Wide adjustment range delivers 180-degree swivel, 360-degree rotation (for landscape or portrait orientation), 90-degree monitor tilt adjustment, and arm extension up to 15.7". Sturdy metal C-clamp and grommet fastener are easy to install and won't damage or mark the desk or table. Each arm is compatible with displays up to 32" and 17.6 lbs..Raise your monitors to a comfortable viewing height with this dual monitor arm.Supports most flat panel monitors up to 32" for versatile use.Made of steel and comes in black.-45 to 45-degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.Weight capacity: 17.6 lbs. per arm.Dimensions: 21.57"H x 35.94"W x 5.83"D.Compatible with VESA 75 x 75mm, 100 x 100mm mounting patterns.SmartFit system makes finding the right height for maximum comfort easy: simply match your hand size to the color on the provided chart, set the height to your color, and you're done.Extendable arms let you easily adjust the distance of your monitors (up to 15.7").Included C-clamp and grommet fastener are made of durable steel and aluminum, require less desk space to attach, are easy to install, and won't damage or mark your desk or table.Cable management system eliminates cable clutter for a cleaner desktop.Meets or exceeds RoHS standard.2-year manufacturer limited warranty

Introducing the ultimate monitor mount designed for the largest ultrawide screens on the market, including the Samsung Odyssey Neo G9. Engineered to hold monitors up to 57 inches and 55 lbs., this mount offers unmatched sturdiness and stability, making it ideal for heavy-duty setups. This monitor desk mount enhances immersive gaming setups by providing precise screen positioning for better viewing angles, supports graphic designers and video editors by allowing them to adjust large, ultrawide screens with ease, and boosts productivity in multitasking environments where flexibility and workspace organization are key. Whether for home offices, professional studios, or gaming stations, this mount is a robust, versatile solution built for the most demanding displays. With full motion adjustability, including tilt, swivel, and screen rotation, you can easily customize your viewing angles for maximum comfort. The built-in gas spring provides effortless height adjustment, allowing you to find the perfect position easily. Integrated cable management keeps your workspace clean and organized, while the mount’s universal compatibility with 75x75 and 100x100 VESA patterns and both clamp and grommet mounting options ensure a secure fit on any desk..This is a heavy-duty single monitor desk mount with a gas spring arm, designed for ultrawide monitors and ideal for gaming, creative, or multitasking setups.Designed for ultrawide screens up to 57", including the Samsung Odyssey Neo G9, ideal for gaming, design, and multitasking..The built-in gas spring allows smooth, touch-controlled height adjustment from 9.26" to 23.63".The monitor mount is black in color and constructed from steel to ensure maximum durability and stability..Offers full motion articulation with +50°/-20° tilt, ±90° swivel, and ±90° rotation for optimal viewing from any angle..The mount supports monitors weighing up to 55 lbs..Compatible with 75x75mm and 100x100mm VESA mounting patterns..Integrated cable management keeps wires organized and hidden, maintaining a clean and professional workspace..Ideal for immersive gaming, design work, or high-productivity workflows that require precision and flexibility..Supported by Limited Lifetime Warranty.Heavy-Duty Monitor Mount for Ultrawide Screens Up to 57".Built for Power, Designed for Flexibility!

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS1000 is designed to do exactly that. Combining industrial influences with a minimalist design, this gas shock monitor mount allows for finger-tip adjustments to be made to the height and orientation of your screen. Raise, tilt, swivel and rotate your monitor on the fly to ensure it's always in an ideal position. The detachable base provides a seamless connection to your desk, while its easy-to-use clamping mechanism can be secured to any ledge or grommet hole up to 2 inches thick. To ensure a clutter-free setup, the DMS1000 also includes cable management clips to conveniently route your cables..EASY INSTALLATION - The detachable base can be secured entirely from the top of your desk..GAS SHOCK SYSTEM - Freely raise or lower your screen to improve line-of-sight and reduce neck strain..UNLIMITED POSITIONS - Easily swivel, tilt and rotate your monitor for optimal viewing..WIDE RANGE OF SUPPORT - Fits any desk edge or grommet hole up to 2" thick and supports monitors weighing 3.3 to 16.5 lb..CABLE MANAGEMENT - Conveniently route your cables to ensure a clean setup.

Ideal for freeing up space on desks, the Allsop Art metal dual-arm monitor stand allows users to position their dual monitor setups for optimal viewing and ergonomic comfort. This dual-arm monitor stand features a sleek minimalist design while offering superior stability and adjustability. Each monitor arm has multiple joints allowing full forward, backward, and side-to-side adjustment. The VESA mount joint features tilt and swivel adjustment capabilities to ensure users will find their perfect viewing angle..Raise your monitor to a comfortable viewing height with this monitor arm.Each arm holds a monitor up to 32" for versatile use.Made of metal.-40 to 40-degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Each arm holds a 32" monitor weighing up to 14.5 lbs..VESA 100 x 100 and 75 x 75 compliant.Comes in black.Quick and easy clamp mounting system fits a variety of desks (up to 2" thick); arms can be assembled and installed in just minutes.Features 6" of independent height adjustment for monitors

Turn your workspace into a comfortable and ergonomic environment with the MI-1771 monitor mount. Say goodbye to eye and neck strain and keep your monitor at a comfortable eye-level since this mount is height adjustable up to 13". The heavy-duty design supports up to 20 lbs. with ease. The base comes with a C-clamp that can also be used as a grommet and can be mounted on tables up to 3.3" thick. The arm features clips for cable management to help keep your desk looking clean and tidy. Depending on the user and desk height, this mounting bracket can be used for sit-stand desk applications. Monitor orientation can be changed from landscape to portrait any time necessary..This monitor mount is compatible with VESA patterns 75 x 75 and 100 x 100 and supports LCD and LED displays ranging from 13" to 32"..The monitor mount allows full 360-degree rotation for easy landscape or portrait screen positioning. The screen can be tilted up to 90 degrees upward or downward to reduce glare and achieve optimal viewing angles..The mount installs easily using either a C-clamp or grommet base and fits desks up to 3.3 inches thick..The arm can be raised or lowered up to 13 inches for customizable viewing comfort..The sturdy gas spring arm supports monitors weighing up to 20 pounds..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Transform Your Workspace with the Mount-It! Gas-Spring Single Monitor Desk Mount, Effortless Movement, Maximum Comfort

Triple Aluminum Gas Spring C-Clamp Desk Mount - 32"..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.Rotation, swivel, and tilt functions enable adjustments for comfortable viewing.Weighs 21.6 lbs..Dimensions: 60.24"H x 27.56"W x 7.5"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

Atdec Ora is a sophisticated monitor arm with clamp for modern ergonomic workspaces. Its patented design fuses Atdec's domain experience with innovative material and manufacturing techniques for outstanding aesthetics and performance. Ora achieves high and extremely stable capacity despite its sleek, minimalist form. The arm's stability and power come from the single-piece monocoque architecture that augments strength, amplified by natural geometric forces created via arm movement. Ora's design is vibration-resistant for a crisp and confident user experience. The arm is interactive, with a wide latitude at each point of movement. Intelligent fingertip adjustment lets users achieve the optimal ergonomic setup as they move, change from sit to stand, or share workspaces. Ora can tilt 45 degrees for comfortable touch-screen operation in workspace or point-of-service environments..Sophisticated monitor arm with clamp for modern ergonomic workspaces.Complete, full-featured monitor arm for a single curved or flat display up to 35".Made of aluminum, steel, and engineering polymers in black.Integrated toolless 180-degree arm rotation limiter to prevent interference with walls and workstation dividers.Weight: 8.6 lbs..VESA mounting dimensions: 75 x 75mm, 100 x 100mm.Balanced tilt mechanism for dynamic viewing angle selection.Effortless counterbalance adjustment with an easy-to-read gauge for fast bulk deployments.Provides adjustable portrait-to-landscape rotation tension.Contemporary styling to suit modern workplace interiors.Discreet cable management guides cables down the arm to the work surface.Package contents: dynamic arm, desk clamp, VESA plate, and display mounting fasteners.Compatible with the AW-FB Ora bolt through fixing (sold separately).10-year manufacturer limited warranty

Save workspace and increase productivity by mounting two monitors, stacked, above your desk. This sturdy and sleek dual-monitor mount raises two displays off the surface of your desk or table, to save space while increasing your productivity. With its steel construction, the dual-monitor mount attaches easily to your desk or table to securely hold two monitors, each up to 27", stacked vertically. Configure your displays to enhance productivity. The dual-monitor mount holds two displays, one above the other, in a vertical configuration. The height of the monitors can be adjusted, as required, along the 27.5" (700 mm) pole. With the dual-monitor mount, you can work more comfortably, reducing neck and eye strain without having to look side to side when comparing files or reviewing reference material on your screens. It's ideal for numerous applications including web design, coding, creating and reviewing files, and many others. The monitor mount saves valuable desk space and lets you work clutter-free, which is a welcome addition in numerous office environments including business, healthcare, and financial settings. Adjust your screens to the ideal position. The monitor mount enables smooth, effortless +45°/-45° tilt and +45°/-45° swivel, making it easy to reduce glare and find the perfect viewing angle. It can also rotate a full 360° giving you flexible viewing options. Rugged steel design. The heavy-duty steel monitor mount holds your two monitors securely in place to protect your investment, and provide long-lasting performance. The dual-monitor mount supports two displays 13" to 27" (330 to 686 mm) in size and 22.1 lb. (10 kg) in weight per monitor. The surface finish features a powder coating to help resist scratches. Easy installation. The dual-monitor mount makes it easy to mount your VESA mount compatible displays above your desk, table or other surfaces, using the included C-clamp or grommet mount. For easier mounting, the VESA mount features notches that let you pre-set the mounting screw, then slide the monitor into place and tighten the screw. To help keep your work area free of clutter, the monitor mount also features cable clips that keep your cables neatly out of sight. The ARMDUALV is backed by a StarTech.com 2-year warranty and free lifetime technical support..Mount two monitors vertically to save space and increase your comfort.Desktop monitor mount supports two displays up to 27" (686 mm) in size and 22.1 lb. (10 kg) in weight per monitor.Heavy-duty steel construction.Made of steel.-45 to 45-degree tilt, -45 to 45-degree pan, and -45 to 45-degree rotation adjustment options enable optimal viewing.Dimensions: 35.43"H x 4.57"W x 4.7"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS1000 is designed to do exactly that. Combining industrial influences with a minimalist design, this gas shock monitor mount allows for finger-tip adjustments to be made to the height and orientation of your screen. Raise, tilt, swivel and rotate your monitor on the fly to ensure it's always in an ideal position. The detachable base provides a seamless connection to your desk, while its easy-to-use clamping mechanism can be secured to any ledge or grommet hole up to 2 inches thick. To ensure a clutter-free setup, the DMS1000 also includes cable management clips to conveniently route your cables..EASY INSTALLATION: The detachable base can be secured entirely from the top of your desk..GAS SHOCK SYSTEM: Freely raise or lower your screen to improve line-of-sight and reduce neck strain..UNLIMITED POSITIONS: Easily swivel, tilt and rotate your monitor for optimal viewing..WIDE RANGE OF SUPPORT: Fits any desk edge or grommet hole up to 2" thick and supports monitors weighing 3.3 to 16.5 lb..CABLE MANAGEMENT: Conveniently route your cables to ensure a clean setup.

This full motion monitor arm lets you extend, tilt, and swivel your monitor and laptop with a full range of motion across multiple axes, with spring-assisted height adjustments for effortless positioning. It makes it easy to create an ergonomic work environment that's tailored to your specific needs..Desk mount laptop arm w/ ventilated laptop tray 12.6" x 9.5" supports up to 17.7lbs. and comes with rubber pads to hold laptop.VESA 75x75/100x100mm heavy duty 34" monitor mount (16:9 or 21:9 ultrawide) max 17.7lbs..Full motion articulating for any angle -85/+90° tilt -/+90° swivel -/+180° display rotation, 360° arm rotation.Ergonomic laptop stand and arm w/ one-touch adjustable height of 13.8" | Manual adjustment along 12.2" pole | Max height 22".C-Clamp desk mount (0.4"-3.3" thick).This Desktop Mount Laptop Arm enables you to raise your laptop off your desk and position it to increase ergonomics and productivity.

Raise monitors to the perfect viewing height and angle with this monitor arm. This arm supports up to two 24-inch monitors and enables full screen rotation, 90-degree tilt, and two points of arm adjustment to help achieve the optimal viewing angle for any task. This StarTech ARMDUAL dual monitor arm can be clamped to surfaces up to 3.75 inches thick, transforming almost any workstation..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 24" monitors for versatile use.Made of plastic for durability.-90-to-90-degree tilt, 360-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Securely holds up to 30 lbs. to fit most monitors.Compatible with the standard VESA mounting patterns: 100 x 100, 75 x 75.Comes in black finish.2-year manufacturer limited warranty.Reduce desktop clutter and facilitate multitasking by using this StarTech ARMDUAL articulating dual-monitor arm.

MI-7904 is affordable solution for working while sitting or standing without having to buy an entirely new desk. Designed to simply clamp to your existing workstation, MI-7904 gives you various placement options for convenient use of two monitors and your laptop, notebook and keyboard. Gas spring-assisted lift mechanism that allows you to raise and lower it almost effortlessly in just seconds..This full motion, sit stand workstation allows to work standing up or sitting down with the height adjustable arm that can travel 19.5" up or down..The dual monitor bracket fits monitors from 20" up to 27" with standard VESA patterns 75x75 and 100x100, and each VESA head supports 13.2 lbs. per monitor..A versatile attachment base can be converted to a c-clamp or grommet base that attaches to any desk or table edge up to 3.1" thick in just a few minutes..The monitor bracket tilts +/- 15 degrees and rotates +/- 180 degrees, while the spring arm swivels +/-90 degrees and is height adjustable by 19.5"..Features a 26.2" L x 10.2" D keyboard that conveniently folds away, and the station also includes an organizer tray and built-in cable management ducts..Supports VESA Patterns: 75x75mm and 100x100mm.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Monitor and Desk Mount specialist Mount-It! will change the way you work! No need to buy a complete sit-stand desk. This height-adjustable desk mount clamps to the edge of your existing desk and allows you to work comfortably from either a sitting or standing position.

Full motion capability allows the user to move the laptop closer or farther away, as well as turning it left and right. The arms holding the tray can be lifted or lowered on the 17.7" high pole. Cable management clips helps organize cables running to the computer..MI-4352LT is a universal laptop riser with a large 14" x 11.8" vented tray that supports laptops with screens up to 17" and up to 22 lbs..Desk Connection: C-Clamp and Grommet.Fully adjustable up and down, swivels to the left or right, and the tilt can be adjusted up to 90 degrees.Quick and easy installation with a solid desk clamp that mounts to desks and tables up to 4" thick.Ideal for saving space and improving ergonomics.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.MI-4352LT laptop desk mount helps reduce the risk of back and neck injury that are common with hours of sitting in an incorrect body posture.

The Mount-It! MI-7903 is a full motion, sit stand converter workstation designed to give you the option to sit or stand in seconds. The heavy-duty spring arm uses counter-balance technology so you only need to set it once to the optimal tension, and then you will be able to effortlessly move your sit-stand up to 19.5" for the desired height. The single monitor VESA bracket works with monitors up to 27" and can be tilted for the optimal viewing angle. The wide keyboard is 26.2" L x 10.2" D and it conveniently folds away when you don't need it. The MI-7903 also features a dual c-clamp and grommet attachment base, an organizer tray, built-in cable management ducts, and is constructed from durable steel and aluminum components..This full motion, sit stand workstation allows to work standing up or sitting down with the height adjustable arm that can travel 19.5" up or down..The single monitor bracket fits monitors up to 27" with standard VESA patterns 75x75 and 100x100, and the bracket head supports monitors up to 13.2 lbs..A versatile attachment base can be converted to a c-clamp or grommet base that attaches to any desk or table edge up to 3.1" thick in just a few minutes..The monitor bracket tilts +/- 15 degrees and rotates +/- 180 degrees, while the spring arm swivels +/-90 degrees and is height adjustable by 19.5"..Features a 26.2" L x 10.2" D keyboard that conveniently folds away, and the station also includes an organizer tray and built-in cable management ducts..10-year manufacturer limited warranty.This desk mount has a full-motion system feature that offers a wide range of movement so that you can personalize your desk stand.