C2G Connectors

This C2G Cables to Go adapter allows the DisplayPort video output of a laptop to connect to the HDMI input of a display and is perfect for applications including displaying video on an HDTV, projector, or monitor in a classroom, on a desktop, or in a meeting room. This active DisplayPort to HDMI active adapter can be used in either DisplayPort single-mode or dual-mode outputs, providing the conversion for a DisplayPort source even when that source does not support DP++. Active DisplayPort conversion is excellent for applications where multiple DisplayPort adapters are required to connect to a single graphics card. This allows every active adapter to interface with a corresponding display..This adapter allows the DisplayPort video output of a laptop to connect to the HDMI input of a display.Cable length is 0.67'.Male DisplayPort to female HDMI connectors.Dongle-style adapter reduces strain on ports.Supports resolutions up to 4K (4096 x 2160 at 30Hz).Made of PVC and comes in black.3-year manufacturer limited warranty

Send a video signal from a tablet, laptop computer, or another source device with a DisplayPort output port to a projector, monitor, or HDTV with an HDMI, DVI or VGA input port. This compact all-in-one converter is an ideal solution for use in schools, conference rooms, or other work spaces that may utilize assorted displays with varying inputs in multiple rooms throughout a building..The DisplayPort to HDMI, VGA, or DVI adapter allows you to connect a DisplayPort equipped laptop or tablet to a projector, monitor, or HDTV with an HDMI, VGA, or DVI input port.Inputs: DisplayPort male.Outputs: DVI female, HDMI female, VGA female.Does not require drivers for installation; the device is powered through DisplayPort bus power, so no additional power adapters are needed.The dongle-style adapter converter reduces strain on the video port..The cable between the DisplayPort connection and the adapter converter provides strain relief that protects the port from strain damage as cords are moved.Supports VGA resolutions up to 1920 x 1080 at 60Hz; DVI resolutions up to 1920 x1080 at 60Hz; HDMI resolutions up to 3840 x 2160 at 30Hz.3-year manufacturer limited warranty

Angled connectors ensure less cable bend and fatigue for longer life!When connecting serial ATA devices to your motherboard or host controller, you want a permanent solution. The last thing you need is a cable that could fatigue, or even fail over time, because of bending or stress occurring right at the critical connection. The angled connectors deliver the cable at a more desired angle and are fortified to keep the cable lined up straight. So you'll continue to receive the performance you expect from your serial ATA drive long after you've plugged it in. Cables To Go offers this serial ATA cable which minimizes clutter, increases airflow and provides maximum transfer rates. Serial ATA cable by Cables To Go is designed to handle the differential signals implemented in today's technology. This ensures increased throughput and reduced data packet loss. The 7-pin, Serial ATA cable permits higher data transmission rates, reduce crosstalk, and improve signal integrity. This cable reduces overheating and save internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters..The last thing you need is a cable that could fatigue, or even fail over time, because of bending or stress occurring right at the critical connection.The angled connectors deliver the cable at a more desired angle and are fortified to keep the cable lined up straight.So you'll continue to receive the performance you expect from your serial ATA drive long after you've plugged it in

Enjoy your media on a large screen by connecting your video source to your computer monitor via the C2G DisplayPort to VGA adapter Cable. The male DisplayPort and 15-pin HD-15 male VGA at either end, plug securely into the ports on your input device, creating an instant connection. An ultra flexible PVC jacket shields the copper wire against outside noise. Available in a convenient length of 3 feet, this DisplayPort to VGA cable lets you position your equipment as per your requirements..Male DisplayPort and 15-pin HD-15 male VGA connectors for a reliable connection between your video devices.PVC jacket maintains the integrity of the signals.3' cable for convenient installation.Comes with a 3-year limited warranty.Comes with a 3-year limited warranty.The C2G 54331 3' DisplayPort to VGA Black Adapter Cable is apt for connecting video devices, notebooks and monitors, facilitating error-free signal transfer.

C2G® 25' USB A Male to female active extension cable in black color runs easily through raceway or conduit with built-in center booster format active chip. High quality cable consumes 100 mA from the USB port of the computer to operate reliably. Buffers the incoming and outgoing signals for electrical and timing minimums. Supports USB 2.0 specifications. Offers excellent conductivity with gold plating contacts..Black USB that is compatible to connect with various devices.25' length for easy access.Male-to-female cable design eliminates the need for separate adapters.USB for quick data-transmission.1 x USB type A male to connect conveniently with desktops or laptops.Molded black PVC hood for durability, aluminum mylar foil shields for added protection.Maximum data transfer rate up to 480 Mbps.Has 22 AWG thickness with voltage rating of 30 V.Features 1 x type A male connector at first end, 1 x type A female USB connector at second end.Copper offers good conductivity.Comes with 1 year limited warranty.Operates temperature range of 80 deg C.Weighs 0.710 lbs.C2G® 25' USB A Male to female active extension cable enhances productivity by providing end-to-end connection up to 75'. Transfers data at the rate up to 480 Mbps.

The C2G® 03044 DB9-to-DB9 female/female null modem cable in beige color, allows two DTE or DCE devices to communicate with no conflict in data transmission. This cable measuring 6' is foil shielded for EMI/RFI protection from surrounding office equipment and fluorescent lights. The crossed transmit and receive signals ensures the proper data transmission..Modem cable communicate with no conflict in data transmission.Cable length: 6'.Connections: DB9 female to DB9 female.Wired connectivity.Copper conductor.Transmit and receive signals are crossed to ensure proper data transmission.Each null modem cable is designed with a rugged, over molded construction that provides added strain relief and a solid connection each time.Cable is foil shielded for EMI/RFI protection from surrounding office equipment and fluorescent lights.Thumbscrew connectors provide a fast, easy connection every time.Weight: 0.26 lbs..Comes with lifetime warranty.Beige 6' modem cable is designed with a rugged, over molded construction that provides added strain relief and a solid connection each time.

The HDMI In-Line Extender is the perfect solution for extending HDMI V signals over HDMI cabling. This extender is capable of supporting a 4K (4096 x 2160 at 60Hz, 4:4:4) resolution at extension distances up to 82 feet and a 1080p resolution at extension distances up to 164 feet. The female to female connector configuration makes this device easy to install and in most instances, no external power is required. Simply connect an HDMI cable from a Blu-ray™ player, laptop or other HDMI device to the HDMI port of the extender labeled Source, and then connect an HDMI cable from the HDMI port of the extender labeled Display to a HDTV, projector, or monitor. The HDMI In-Line Extender is HDCP 2.2 compliant and supports exceptional 4K resolutions up to 4096 x 2160 at 60hz with 4:4:4 chroma sub-sampling, handling total HDMI data rates up to 18Gbps..No external power required.Supports HDR10 and Dolby Vision HDR.CEC Pass through.Transmit up to 164ft at 1080p at 60Hz

The 4-Port USB 3.1 Over Cat6a Extender was designed to extend USB 3.1, 2.0 and 1.1 devices simultaneously up to 328 feet over a single Cat6a cable, making it a perfect solution for USB 3.1 conferencing cameras, interactive white boards, security and monitoring, video matrix systems, remote storage, and/or any other USB 3, 2 and 1 device. Convenience No software drivers required, making installation quick and easy with true plug and play convenience. Simply connect the Transmitter to the source computer, extend with a single category cable, and connect the Receiver to as many as four USB devices. Performance The 4-Port USB 3.1 Over Cat6a Extender provides the ability to connect USB 3.1 Gen 1 (5 Gbps) device types and is backwards compatible to USB 2.0 and 1.1 across a point-to-point connection. The extender also includes an Ethernet pass-through for connecting to network enabled devices or to use existing infrastructure without losing LAN connectivity..Requires a single Cat6a cable.100/1000Mbps Ethernet channel; LAN pass-through.Point-to-point connection.Up to 1.2A (6W) per USB port

Panel type unshielded RJ45 (8P8C) keystone jack..White.Length: 6.1".Panel type unshielded RJ45 (8P8C) keystone jack.110/krone IDC horizontal punchdown termination for 22-26 AWG UTP solid wire.Balances signal transmission of insertion loss and crosstalk from 1 to 250 MHz.Complies with FCC part 68.Includes: Two plastic strain relief caps for IDC connector, three color coded designation dust covers with voice, data and Cat6 icons.Meets or exceeds industry standard category 6/class E according to TIA/EIA 568b 2.1 and ISO 11801 2nd edition.Lifetime limited warranty

The C2G 6' black adapter cable is a perfect solution for connecting the DisplayPort output to a computer monitor or other display that accepts a VGA input. It has a DisplayPort male digital audio/video connector on first end and 15-pin HD-15 male VGA connector on the second end. This adapter cable carries an analog video signal and supports up to 1920 x 1200 resolution for superior video quality. It meets the requirements of high performance applications. This cable is suitable for extending the life of the current display in a desk setup..Adapter cable is a perfect solution for connecting the DisplayPort output of a laptop to a computer monitor which accepts a VGA input.Length: 6'.Has one 20-pin DisplayPort male digital audio/video connector on first end and one 15-pin HD-15 VGA male connector on second end.PVC jacket offers protection against corrosive environment.Features aluminum foil braided shielding and FM-PE insulation to minimize EMI/RFI interference.Conductor: 30 AWG (7/0.1) tinned copper.Compatible with PC.Voltage rating: 30 V, Time delay: 5.2 ns/m (max.).Conductor resistance: At 20 deg C max.Insulation resistance: 10 M Ohms/km.Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz and 37.095 dB at 7 GHz.Temperature: 0 - 50 deg C (operating), -25 to 70 deg C (storage).Supports monitor, notebook and video device.Insulation color: White/brown, white/red, white/orange, white/green, white/blue.CE Listed.Weight: 0.321 lbs..Comes with 3 years warranty

HDMI male to male cable provides easy connectivity between display and multimedia devices..10.2 Gbps data transfer rate for fast connections.Ethernet support for surfing the Internet.PVC jacket for protection from external noise.Aluminum foil braided shielding for added durability.30 AWG for proper insulation and improved performance.10' length for easy access to ports in confined spaces.Voltage Rating: 30 V.DC Resistance: 300 V.Insulation Resistance: 100.Compliant Standards: RoHS.Compliant Standards: RoHS

The 10ft (3m) USB-C to C 2.0 Male to Male Cable is the ultimate solution for connecting your USB-C enabled devices for fast charging and data transfer. With a 5A charging output and data transfer speeds up to 480 Mbps, this cable ensures your devices stay powered and synced effortlessly. Its reversible USB-C connectors make it easy to plug in, while the durable PVC jacket and stranded copper conductors provide reliable performance. Compatible with Apple® and Microsoft® Surface® devices, this high-quality cable offers versatility and longevity with a lifetime warranty..The USB-C to C 2.0 Male to Male Cable is ideal for connecting devices like laptops, tablets, and smartphones for charging and data transfer. It is perfect for use with Apple®, Microsoft® Surface®, and other USB-C enabled devices..This cable has a length of 10 feet (3 meters), providing ample reach for connecting devices in various settings..It features USB-C Male connectors on both ends, providing a stable connection for charging and data transfer. The connectors are symmetrical for a reversible, hassle-free plug-in..The cable is built with 30 AWG wire gauge and is made of PVC jacket material. It uses stranded copper for conductors, offering durability and effective data transmission. The true color is black..While this cable is primarily for charging and data transfer, it also supports video input and output via USB-C, allowing for media sharing across devices..Connector 1: USB-C Male Connector 2: USB-C Male.The cable supports data transfer speeds of up to 480 Mbps, allowing for quick and efficient file sharing between devices..Compatible with Apple® iPad Pro®, MacBook®, MacBook Air®, and MacBook Pro®. It also works with the Microsoft® Surface® Book 2, Surface Go, and other USB-C enabled devices..This cable complies with the USB 2.0 standard and is RoHS compliant, ensuring it meets environmental and safety regulations..The product comes with a lifetime warranty, ensuring long-term reliability and support.

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

Upgrade your connectivity with the C2G HDMI to VGA Adapter Converter Dongle, the perfect solution for linking modern HDMI-enabled laptops to legacy VGA monitors or projectors. Designed for seamless signal conversion, this compact 8-inch adapter transforms digital HDMI output into high-quality analog VGA video - supporting resolutions up to Full HD 1920 x 1080. Its lightweight, low-profile build minimizes strain on your device’s port, while the Micro USB power input ensures stable performance across all compatible devices. Ideal for business presentations, classroom setups, and home offices, this plug-and-play adapter delivers reliable performance without the need for drivers. Backed by a 3-year warranty and CE certification, it’s a dependable choice for bridging the gap between old and new display technologies..Convert HDMI to VGA Easily – Seamlessly connect your HDMI-enabled laptop or device to a VGA monitor or projector for reliable video output..High-Resolution Support – Delivers crisp visuals with support for resolutions up to 1920 x 1080, including 1080p, 720p, and legacy formats..Compact & Stress-Free Design – 8" adapter length minimizes strain on your laptop’s HDMI port, ideal for compact workspaces and travel..Micro USB Power Support – Includes Micro USB input for additional power when needed, ensuring stable signal conversion..Durable Build Quality – Features a black PVC jacket, 0.2" cable diameter, and 12mm minimum bend radius for long-lasting performance..Plug-and-Play Convenience – No drivers required; just connect and go for instant compatibility with VGA displays..Certified & Backed by Warranty – CE certified and supported by a 3-year limited manufacturer warranty for peace of mind..Versatile Compatibility – Ideal for use with laptops, desktops, and other HDMI devices connecting to older VGA monitors or projectors..Connect your laptop to a computer monitor with this C2G HDMI male to VGA female adapter converter dongle.

This DisplayPort 1.2 to Dual HDMI MST Hub allows a DisplayPort enabled device to connect to two HDMI enabled displays for video mirroring, video extension, or viewing a single video image across two displays. The hub is perfect for graphic design, spreadsheet analysis, and digital signage applications. Improve multitasking and increase productivity by configuring the hub to work as a splitter with the same video image on each display, extending a video image to multiple displays, or expanding a video image by joining multiple monitors together as one display. The hub is ideal for a multiple display desk setup and the light-weight, small form factor, also makes it easy to carry while traveling or just on the go The hub supports resolutions up to 4K (3840 x 2160) at 60Hz when connected to a single display or 4K (3840 x 2160) at 30Hz when connected to dual displays and has a max bandwidth of 5.4Gbps. Note: This hub requires 5V/2A of power. In some instances, depending on the connected source device, additional external power may be required through the USB Micro-B port on the hub. This MST hub is DisplayPort 1.2 compliant. The source device video card and display must support DisplayPort 1.2 and MST..Supports 7.1 channel surround sound.DisplayPort 1.2 standards.Dongle style adapter.USB Micro-B port for additional power

The C2G® 8" black USB-C to DisplayPort adapter converter is suitable to use with a monitor, projector or HDTV for displaying video as well as audio. This compact, lightweight adapter has plug-and-play connection for easy installation and supports video resolutions up to a 4k resolution. It features tinned copper conductor for superior conductivity. This converter has one type C male USB 3.1 USB connector on first end and one DisplayPort female audio/video connector on second end..USB-C to DisplayPort adapter converter is perfect for showing presentations, pictures or other audio/video content.Cable length: 8".Connections type: Connector on first end: One type C male USB 3.1 USB, Connector on second end: One DisplayPort female audio/video.Tinned copper conductor for superior conductivity.Color: Black.Supported resolution: 3840 x 2160, American wire gauge: 32 AWG.Device supported: Projector, monitor, HDTV, tablet and notebook.Specifications: Supports up to a 4k resolution, reversible and symmetrical USB-C connector.Design: Compact and lightweight, Ease of use: Plug-and-Play (no driver required).Suitable for showing presentations or audio/video content from USB-C port of laptop, tablet to Displayport input of monitor, projector or HDTV.Adapter supports up to a 4k (3840 x 2160 at 30 Hz) resolution while allowing it to deliver a high quality video image to the connected display.Voltage: 30 V, Conductor resistance: At 20 deg C max 32 AWG: 588.85 ohms/km.Insulation resistance: 10 M-km min at 20 deg C 500 VDC (EIA-364-21), Dielectric strength: 500 VAC/1 min no breakdown (EIA-364-20).Operating temperature: 0 - 50 deg C.Weight: 0.073 lbs..Comes with 3 years warranty

C2G® 3.28' Micro USB 2.0 type A male to type B male cable in black color is an effective way to make the right connection to offer high performance. Versatile cable accelerates the data-transfer process by transferring digital signals or data at the speed of 480Mbps. Connects your computer to peripherals like cellphones, GPS systems, PDAs, OTG devices and digital cameras. Smaller and thinner micro-USB connector helps to transfer data easily and charges your device to offer better performance. Suitable for high frequency 2 GHz DBS satellite distribution systems..Black USB 2.0 cable that is compatible to connect with various devices.3.28' length for easy access.Male-to-male cable design eliminates the need for separate adapters.USB 2.0 for quick data-transmission.1 x USB 2.0 type A male to connect conveniently with desktops or laptops.Device requires a USB Micro-B or USB Micro-A female port.Features 1 x 4-pin type A male USB 2.0 connector at first end, 1 x 5 pin micro-USB type B - male connector at second end.Copper offers good conductivity.Lifetime limited warranty.Meets RoHS certification and standards.Weighs 0.104 lbs.C2G® 3.28' Micro USB 2.0 type A male to type B male cable connects peripherals to a computer for reliable transmission. Transfers the data at the rate up to 480Mbps.

This Mini DisplayPort 1.2 to Dual HDMI MST Hub allows a Mini DisplayPort enabled device to connect to two HDMI enabled displays for video mirroring, video extension, or viewing a single video image across two displays. The hub is perfect for graphic design, spreadsheet analysis, and digital signage applications. This MST hub is a perfect accessory for Microsoft Surface products and other leading laptops. Improve multitasking and increase productivity by configuring the hub to work as a splitter with the same video image on each display, extending a video image to multiple displays, or expanding a video image by joining multiple monitors together as one display. The hub is ideal for a multiple display desk setup and the light-weight, small form factor, also makes it easy to carry while traveling or just on the go The hub supports resolutions up to 4K (3840 x 2160) at 60Hz when connected to a single display or 4K (3840 x 2160) at 30Hz when connected to dual displays and has a max bandwidth of 5.4Gbps. Note: This hub requires 5V/2A of power. In some instances, depending on the connected source device, additional external power may be required through the USB Micro-B port on the hub. Optional Micro-B power cable available (Part No. 27053). This MST hub is DisplayPort 1.2 compliant. The source device video card and display must support DisplayPort 1.2 and MST..DisplayPort 1.2 standards.USB Micro-B port for additional power.5.4Gbps max bandwidth.Supports 7.1 channel sound

The C2G® 6.6' USB-A male to USB mini-B male data transfer cable allows to connect your 5-pin mini-USB camera or device to the USB port on your USB hub, PC or Mac®. This black cable works with most digital cameras. It offers a transfer rate up to 480 Mbps depending upon the peripheral's USB version. It is great for transferring pictures from your digital camera to your PC or Mac. The foil and braid shielding of this cable reduces EMI/RFI interference. It features twisted-pair construction that helps to reduce cross talk and assures high-speed, error-free data transfer..Data transfer cable offers optimal data transmission.Cable length: 6.6'.Connections: 1 x USB-A male to 1 x USB mini-B male.Copper conductor for good conductivity.Meets RoHS compliant.Compatible with USB hub, PC or Mac and many camera models from the major brands.Comes in black color.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G ® 6.6' type-A USB/type-B micro USB male/male data transfer cable is perfect for cell phones, GPS systems, PDAs and digital cameras. It offers transfer speed up to 480 Mbps and is compliant with USB 2.0 specifications. This cable is perfect to charge and synchronize many cell phones..Cable length: 6.6'.Connections: USB to USB.Interface: USB 2.0.Interface: USB 2.0.First end connection: one 4-pin type-A USB male.Second end connection: one 5-pin type-B micro USB male on first end.Compatible with cellphones, GPS systems, PDAs and digital camerasCopper conductor for better electrical conductivity.Perfect to charge and sync many cell phones.Great replacement or spare cable and is available in lengths up to 3 m.Small form factor is suitable for today's compact portable devices for transferring data or charging your device easily.RoHS Compliant.Weight: 0.18 lbs..Comes with lifetime warranty

This USB 3.0 (USB 3.1 Gen 1) USB-C to USB-A Adapter Converter is the perfect solution for connecting a flash drive, keyboard, mouse, or other device that has a USB A connector to a laptop or desktop computer that has a USB Type-C port for USB 3.0 (USB 3.1 Gen 1) communication. The color coded USB Type-C connector allows this adapter converter to be easily identified as a USB 3.0 (USB 3.1 Gen 1) adapter and differentiated from other adapters which may support a different feature set. The USB Type-C connector is smaller than traditional USB connector and features a symmetrical design which allows it to be easily connected on the first try. Additionally, the durability of the USB Type-C connector allows for up to 10,000 connection cycles. This cable supports a data rate up to 5Gbps for data transfer and sync with 5 volts and 1 amp of power for device operation and charging..Perfect Connectivity Solution: Connect flash drives, keyboards, mice, and other USB-A devices to laptops or desktops with USB Type-C ports..Color-Coded Identification: Easily identify the adapter as USB 3.0 (USB 3.1 Gen 1) with its color-coded USB Type-C connector..Compact and Symmetrical Design: Smaller than traditional USB connectors, the symmetrical design ensures easy connection on the first try..Durable and Reliable: USB Type-C connector supports up to 10,000 connection cycles for long-lasting use..High-Speed Data Transfer: Supports data rates up to 5Gbps for fast data transfer and synchronization..Powerful Performance: Provides 5 volts and 1 amp of power for device operation and charging.

HDMI to DVI-D cable for smooth signal transfer..Gold-plated Type A male HDMI and single-link male DVI-D connectors for corrosion resistance.PVC jacket maintains the integrity of the signals.3.3' cable for convenient installation.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

Make compatibility and setup the easy part. C2G 10ft DisplayPort Male to HD Male Adapter Cable - Black (VQ5923) with a 10ft length (key specs: 10 ft). Use it for presentations, monitor hookups, or quick replacements to keep teams moving. Simple to integrate and dependable for daily use..Connect DisplayPort so you can connect laptops to monitors, projectors, and meeting room displays.Plug-and-play setup helps you get connected quickly—ideal for quick replacements.Input: VGA.Compact design fits easily in IT kits, travel bags, and hot-desk drawers.Black.Features two 30 AWG bare copper conductors for enhanced conductivity.Voltage rating: 30 V.Temperature: 0 to 50 deg C operating, -25 to 70 deg C storage.Supports audio/video device, notebook, projector and TV.Supports up to a 1080p resolution.Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal.Meets CE certification.Weight: 0.39 lbs..Comes with 3 years warranty.Simplify device compatibility—quick, dependable connection for everyday setups and replacements.

The C2G® 10' black Displayport cable is a perfect solution for connecting the DisplayPort output of a laptop to a monitor or other display, which accepts a DisplayPort input. It has a DisplayPort male DisplayPort 1.2 digital audio/video connector on both the ends. This cable comes with the latches that secure the cable in the port carries a digital audio/video signal. It supports a HBR bandwidth and up to 1920 x 1080 resolution for superior video quality. This cable meets the requirements of high performance applications..Cable for connecting the DisplayPort output of a laptop to a computer monitor that accepts a DisplayPort input.Cable length: 10'.Has 20-pin DisplayPort male digital audio/video connector on first end and 20-pin DisplayPort male digital audio/video connector on second end.PVC jacket offers protection against corrosive environment.Features aluminum foil wrap braided shielding and foam-polyethylene insulation to minimize EMI/RFI interference.Features two 30 AWG tinned copper conductors for enhanced conductivity.Certifications & Standards: CE.Minimum bend radius: 73 mm.Supports audio/video device, monitor and notebook.Supports a high bit rate bandwidth and up to a 4k resolution.Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal and features locking latch for enhanced operation.Meets CE certification.Weight: 0.35 lbs..Comes with lifetime warranty

C2G® 25' RS232 - DB9 Null modem cable is fully shielded to prevent unwanted EMI/RFI interference and features low profile connectors. Cable comes with a rounded shape that accommodates smaller monitor mounts..Low-profile connector length: 1 1/4", Cable length: 25'.Cable type: Serial.Connectors: 1 x DB-9 female serial on first end, 1 x DB-9 female serial on second end.Conductor: Copper.Jacket type: CMG, FT4.Certifications and standards: RoHS.Weight: 0.675 lbs..Warranty: Lifetime limited.C2G® 25' RS232 - DB9 Null modem cable has molded cable design that delivers excellent strain relief and is designed to support RS-232/Serial communications.

The C2G Cables to Go (28104) is a 16.4 ft. USB 2.0 A/B high performance cable designed to connect USB Type A (standard USB) to USB Type B (commonly found on printers and scanners), making it perfect for linking various peripherals to your computer or USB hub. With a data transfer rate of up to 480 Mbps, this cable ensures fast and efficient data transmission. Its fully molded connectors provide excellent strain relief for long-lasting performance, while foil and braid shielding reduce EMI/RFI interference, maintaining signal integrity. Constructed with twisted pair technology to minimize crosstalk interference, and made from high-quality materials including a PVC jacket and 24 AWG wire gauge, this cable is compatible with various operating systems such as Windows, Mac, and Linux. Ideal for home office setups, professional environments, or everyday use, the C2G Cables to Go (28104) offers extended reach and robust construction for reliable connectivity..Versatile USB Cable: Connects USB Type A (standard USB) to USB Type B (commonly found on printers and scanners) – Perfect for linking various peripherals to your computer or USB hub..Length: 16.4 feet (5 meters) – Ideal for setups requiring extended reach..Data Transfer Rate: Up to 480 Mbps – Ensures fast and efficient data transmission..Durability: Fully molded connectors provide excellent strain relief, ensuring long-lasting performance..Shielding: Foil and braid shielding reduce EMI/RFI interference, maintaining signal integrity..Construction: Twisted pair construction minimizes crosstalk interference for reliable connectivity..Quality: Made with high-quality materials including a PVC jacket and 24 AWG wire gauge for durability and performance..Compatibility: Works seamlessly with various operating systems including Windows, Mac, and Linux.

The C2G Cables to Go (28104) is a 16.4 ft. USB 2.0 A/B high performance cable designed to connect USB Type A (standard USB) to USB Type B (commonly found on printers and scanners), making it perfect for linking various peripherals to your computer or USB hub. With a data transfer rate of up to 480 Mbps, this cable ensures fast and efficient data transmission. Its fully molded connectors provide excellent strain relief for long-lasting performance, while foil and braid shielding reduce EMI/RFI interference, maintaining signal integrity. Constructed with twisted pair technology to minimize crosstalk interference, and made from high-quality materials including a PVC jacket and 24 AWG wire gauge, this cable is compatible with various operating systems such as Windows, Mac, and Linux. Ideal for home office setups, professional environments, or everyday use, the C2G Cables to Go (28104) offers extended reach and robust construction for reliable connectivity..Versatile USB Cable: Connects USB Type A (standard USB) to USB Type B (commonly found on printers and scanners) – Perfect for linking various peripherals to your computer or USB hub..Length: 16.4 feet (5 meters) – Ideal for setups requiring extended reach..Data Transfer Rate: Up to 480 Mbps – Ensures fast and efficient data transmission..Durability: Fully molded connectors provide excellent strain relief, ensuring long-lasting performance..Shielding: Foil and braid shielding reduce EMI/RFI interference, maintaining signal integrity..Construction: Twisted pair construction minimizes crosstalk interference for reliable connectivity..Quality: Made with high-quality materials including a PVC jacket and 24 AWG wire gauge for durability and performance..Compatibility: Works seamlessly with various operating systems including Windows, Mac, and Linux.

This C2G Value Series 6' black mini-phone to RCA audio Y-adapter cable converts a 3.5 mm jack to dual stereo RCA jacks. It splits an audio signal or adapts from one connection to another to meet your application needs. The brass/nickel-plated plugs of this cable connect to 26 AWG spiral-wrapped copper-shielded wire. The dual conductor has shielding to safeguard from EMI/RFI interference. The connectors of this cable have molding to provide excellent strain relief and durable use..Cable length: 6'.Connections: One mini-phone male connector on first end, two RCA male connector on second end.Brass/nickel-plated plugs connect to 26 AWG spiral-wrapped copper-shield to protect from EMI/RFI interference.Features fully molded connectors to provide excellent strain relief.Comes in black color.Quality-made to deliver crisp and clear sound.Certifications and standards: RoHS and Green Compliant.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G 3 m black USB 2.0 type A/A extension cable helps to extend the reach of your existing USB A/B cable. Foil and braid shielding of this cable minimizes EMI/RFI interference effectively. Cable featuring twisted pair construction, aids to minimize crosstalk for a high speed, error-free data transfer. It supports USB 2.0 speeds and offers guaranteed performance with various mobile devices as well laptops including PCs, Macs..Type A Male USB.Type A Female USB.9.84ft.Black.Copper conductors offer better conductivity.RoHS Compliant.Comes in black color.Compatible with Mac and PC.Shielded to provide protection from interference.Weight: 0.23 lbs..Comes with lifetime warranty

The C2G 6' DisplayPort to HDMI Video Cable (3850843) is a high-quality cable designed to connect DisplayPort-enabled devices to HDMI displays. This 6-foot cable ensures seamless audio and video transfer from your computer to your HDTV, projector, or monitor, supporting resolutions up to 1080p. Perfect for home office setups, professional environments, or everyday use, this cable offers reliable connectivity and extended reach for all your video needs..Versatile Video Cable: Connects DisplayPort output to HDMI input – Ideal for linking computers to HDTVs, projectors, and monitors..Length: 6 feet – Provides flexibility and convenience for connecting devices over longer distances..Resolution: Supports up to 1080p – Ensures high-definition video quality..Durability: Fully molded connectors with integral strain relief for long-lasting performance..Shielding: Premium shielding prevents unwanted noise interference, maintaining audio and video quality..Construction: Twisted pair technology minimizes crosstalk interference for reliable connectivity..Quality: Made with high-quality materials including a PVC jacket for durability and performance..Compatibility: Works seamlessly with various operating systems including Windows, Mac, and Linux..Compliance: Meets CE, FCC, and RoHS standards..Warranty: Backed by C2G's 5-year warranty..Use this C2G 6-foot DisplayPort adapter cable to connect your computer to an HDTV or projector without hassle.

The C2G 6' DisplayPort to HDMI Video Cable (3850843) is a high-quality cable designed to connect DisplayPort-enabled devices to HDMI displays. This 6-foot cable ensures seamless audio and video transfer from your computer to your HDTV, projector, or monitor, supporting resolutions up to 1080p. Perfect for home office setups, professional environments, or everyday use, this cable offers reliable connectivity and extended reach for all your video needs..Versatile Video Cable: Connects DisplayPort output to HDMI input – Ideal for linking computers to HDTVs, projectors, and monitors..Length: 6 feet – Provides flexibility and convenience for connecting devices over longer distances..Resolution: Supports up to 1080p – Ensures high-definition video quality..Durability: Fully molded connectors with integral strain relief for long-lasting performance..Shielding: Premium shielding prevents unwanted noise interference, maintaining audio and video quality..Construction: Twisted pair technology minimizes crosstalk interference for reliable connectivity..Quality: Made with high-quality materials including a PVC jacket for durability and performance..Compatibility: Works seamlessly with various operating systems including Windows, Mac, and Linux..Compliance: Meets CE, FCC, and RoHS standards..Warranty: Backed by C2G's 5-year warranty..Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal.Meets CE certification.Weight: 0.263 lbs..Comes with 3 years warranty.Use this C2G 6-foot DisplayPort adapter cable to connect your computer to an HDTV or projector without hassle.

The C2G ® 3147 1' monitor power adapter cord is perfect to use with monitors, scanners, printers and other devices that use the 3-pin male-to-female shroud power connector. This flexible adapter cord comes in fully molded design for maximum durability. The female connector plugs directly into the device and the male connector plugs into an auxiliary power port on the power supply for auto power when the system is on/off condition..Cord length: 1'.Three prong guards against shock.Comes in black color and SVT jacket prolongs cable life.18/3 AWG conductor constructions ensures superior electrical conductivity.Amperage: 10 A, Voltage rating: 125 V.Connector on first end: one 3-pin IEC 320 EN 60320 C14 male.Connector on second end: one 3-pin NEMA 5-15R female.Diameter: 6.3 mm OD.Compatible with monitors, scanners, printers and other devices.Female connector connects directly into the device while the male connector plugs into an auxiliary power port on the power supply.TAA Compliant.Weight: 0.18 lbs..Comes with lifetime warranty

The C2G Performance Series Ultra Flexible High Speed HDMI Cable is perfect for connecting a wide variety of devices from computers to projectors and monitors, AV presentation furniture, or in-wall applications requiring high speed HDMI features and video resolutions up to 4k (4096 x 2160) at 60Hz - perfect for conference rooms, classrooms, churches, and other commercial installations. This Ultra Flexible High Speed HDMI Cable was designed for installations in tight spaces and offers commercial grade connectors that feature compact overmolding for high density environments, integrated finger grips on the top, bottom, and sides, for easy insertion and removal, and the gripping connector shell has 2x greater port retention to keep your devices connected. The gold plated connectors on the cable allow for better shielding, increased electrical conductivity, and durability. This Ultra Flexible High Speed HDMI Cable supports the updated library of Consumer Electronic Control (CEC) commands, allowing communication between devices connected through the HDMI ports. Lastly, this fully-functional, high bandwidth cable has been tested to perform at industry standards..Audio/video cable with HDMI interface.Cable length: 6'.HDMI (19-pin) to HDMI (19-pin) connectors.Black cable with PVC jacket to protect this cable from environmental factors.Compatible with your monitor.Meets or exceeds RoHS two (2011/65/EU) and CEC CMG FT4 standards.Lifetime manufacturer limited warranty

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 2' blue Cat6 snagless patch cable has a RJ-45 male connector on each end for reliable connectivity. This cable features a snagless design that protects the connectors from damage and offers long-lasting optimal performance. It also features HDPE insulation and a PVC jacket for durability. The 24-AWG bare stranded copper conductors and 50-micron gold plated copper alloy connectors ensure optimal signal conductivity. This cable is suitable for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, and 4/16 Mbps token ring applications..Category 6 for Network Device.RJ-45 Male.2ft.Blue.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in blue color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.069 lbs..Comes with lifetime warranty.StarTech.com® PXT101NB10 10' Black power cord with NEMA 1-15P and IEC 60320 C7 connectivity helps to extend your laptop power cord length. 18 AWG cord provides reliable connection.

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

Cables To Go 15ft Universal Power Cord.A convenient length of 15' for ease of installation.Features IEC 320 C13 first end and NEMA 5 15R second end for reliable connection.Well suited to use with computers, monitors, scanners, printers and devices that use a 3-pin shroud power connector.Comes in black color for a new look.STV type cable for reliable connectivity.Operates feasibly with input voltage of 125 V and current of 10 A.Comes with wire of size 18 AWG.Comes with outer diameter of 6.3 +/- 0.1 mm.DVW tested at 1500VAC for 1 second.Operates feasibly at 60 deg C and stores comfortably at -20 - 60 deg C.Rated with resistance 20 deg C < 22.4 ohms/km at 25 deg C < 22.8 ohms/km and features 0.33 mm insulation with 2 +or-0.1 mm diameter.Male connector plugs into a standard outlet while female connector plugs directly into the device.Meets UL-E135710, E115330, TAA and RoHS standards.Standard Warranty: Lifetime.Weight: 0.78 lb..Cord Length: 15 ft.C2G® 9482 15' Black standard power cord with NEMA 5-15P and IEC320C13 connectivity ideal for power cable replacement. 18 AWG Heavy duty cord provides reliable power connection.

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

The C2G ® 4' RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.4ft.Blue.Tripp Lite 6' Null modem gold cable uses copper conducting material to resist corrosion and allows you to connect 2 serial devices that require cross-wired configuration.

The C2G 22011 15' Cat5e 350MHz snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.35 lbs..Comes with lifetime warranty.Category 5e for Network Device.C2G® 29932 8' Black power extension cord with NEMA connectivity on both ends allow you to extend power cord for flexibility. The 16 AWG cord provides reliable connection.

The C2G 22011 15' Cat5e 350MHz snagless unshielded blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.34 lbs..Comes with lifetime warranty.Category 5e for Network Device.6" LP4 to LP4 SATA power Y cable adapter features powers an IDE (LP4 connected) drive using a SATA power connector from the computer power supply.

This DisplayPort/DVI-D connector is compatible with notebooks, tablets, monitors, and video devices..8".1 x DisplayPort Male Digital Audio/Video.1 x DVI-D (Single-Link) Female Digital Video.Black