Call Center Adapters for Phone

The Cisco ATA 191 Analog Telephone Adapter turns traditional telephone, fax, and overhead paging communications devices into IP devices for greater cost-effectiveness. Customers can take advantage of IP telephony applications by connecting their analog devices to Cisco analog telephone adapters. The Cisco ATA 191 Analog Telephone Adapter is the preferred solution to address the needs of customers who connect to enterprise networks, small offices, or the emerging unified communications as a service from the cloud. It has two standard FXS ports, which can be configured independently as two Session Initiation Protocol (SIP) registrations. With the ATA 191, customers can protect and extend their existing investment in analog systems, as well as smooth their migration to pure voice over IP in an affordable and reliable way..Turns traditional telephone, fax, and overhead paging communications devices into IP devices for greater cost-effectiveness.Connectivity: 1 x 10/100Mbps RJ45 Ethernet and 2 x RJ11 FXS ports.Compatible with the brand's call control systems (CUCM, CME).Dimensions: 3.9"H x 3.9"W x 1"D; weight: 4.7 oz..Enables an IPv4/IPv6 dual stack to facilitate migration to IPv6.Offers clear, natural-sounding voice quality via advanced preprocessing, high-performance echo cancellation, Voice Activity Detection (VAD), and Comfort Noise Generation (CNG).Improves serviceability with a dedicated PRT button for problem reporting and log collection.Eases deployment via a Cisco Unified Communications Manager central interface.Provides a complete security solution for both media and signaling.DC input voltage: 5V at 2.4A maximum; power consumption: 5W.LED indicators: power, network, phone 1, phone 2, PRT.Buttons: reset/problem reporting (PRT).1-year manufacturer limited warranty

The Jabra® 6.56' phone cable offers RJ-11 male connector to quick disconnect connection. This cable features copper conductor for optimal signal conductivity..Phone cable is suitable to use with Jabra headset.Cable length: 6.56'.Connections: RJ-11 male to quick disconnect.Copper conductor for good conductivity

Covert analog phones into digital IP phones to simplify management and faxing. Ensure VoIP with Wi-Fi connectivity when ethernet isn’t available. Reutilize your analog phone with the Poly ATA 400 Series and take advantage of VoIP calling. Get the advantage of digitization, access a dial tone over the network without replacing your existing phones. The PDMS-SP cloud service lets you configure, modify, troubleshoot, and maintain all the Poly ATA 400 devices and phones they are connected to across your organization. API support enables real-time ATA status monitoring. One FXS port lets you make and receive calls and faxes over the internet using SIP-based VoIP and T.38 services. Multiple Poly ATA 400 devices can be used in a single room. Effortless deployment with Poly ATA 400: connect analog phone, power source, and internet for a seamless transition to digital IP communication. Repurpose phones in minutes with a simple setup. Poly ATA 400 helps analog telephony join the digital world, transitioning from Public Switched Telephone Network (PSTN). As regions worldwide shift to digital networks, our solution keeps you connected. With a WiFi USB adapter, sold separately, you can access Wi-Fi for VoIP even when ethernet isn't available, keeping your communication flowing smoothly in any situation. The Poly ATA 400 works with your existing infrastructure. The Poly ATA is Zoom certified and Microsoft supported through Microsoft Teams SIP Gateway. Bring clearer communication to your analog phones with high-quality sound built on Poly’s decades of audio expertise..VoIP adapter designed to connect analog telephones and fax machines to VoIP networks using SIP protocol.1 x FXS port for analog device connection, 1 x Ethernet LAN port, and 1 x Ethernet WAN port for network connectivity.Works with Open SIP environments and is compatible with a wide range of VoIP service providers.Supports high-quality voice over IP, advanced security protocols, easy web-based configuration, compact design, and includes power supply.Included in the box Quick Start Guide, AC Power Adapter, Ethernet Cable, ATA400 Voice Service Bridge & Telephone Adapter.1-year limited manufacturer's warranty

The Cisco ATA 191 multiplatform analog telephone adapter is a 2-port handset-to-Ethernet adapter that brings traditional analog devices into the IP world. The Cisco ATA 191 multiplatform analog telephone adapter turns traditional telephone, fax, and overhead paging communications devices into IP devices for greater cost-effectiveness. Customers can take advantage of IP telephony applications by connecting their analog devices to Cisco analog telephone adapters. The ATA 191 is the preferred solution to address the needs of customers who connect to enterprise networks, small offices, or unified communications as a service from the cloud. It has two standard FXS ports, which can be configured independently as two Session Initiation Protocol (SIP) registrations. With the ATA 191, customers can protect and extend their existing investment in analog systems, as well as smooth their migration to pure voice over IP in a more affordable and reliable way..This multiplatform analog telephone adapter turns traditional telephone, fax, and overhead paging communications devices into IP devices for greater cost-effectiveness.Connectivity: 2 x RJ-11 FXS ports, and 1 x 10/100 Mbps RJ-45 Ethernet port.Adapter is designed to work with Cisco Webex Calling, BroadCloud and BroadWorks, and other third-party call control system Metaswitch, Asterisk.Dimensions: 1.1"H x 3.9"W x 3.9"D.Enables IPv6 dual stack to help with migration to IPv6.Customers can take advantage of IP telephony applications by connecting their analog devices to Cisco analog telephone adapters.It has two standard FXS ports, which can be configured independently as two Session Initiation Protocol (SIP) registrations.Offers clear, natural-sounding voice quality via advanced preprocessing, high-performance echo cancellation, voice activity detection, and comfort noise generation.Improves serviceability with a dedicated PRT button for problem reporting and log collection.Enables zero-touch provisioning via TR-069 and XML configuration files.Provides a complete security solution for both media and signaling.DC input voltage: 5V at 2.4A maximum; power consumption: 5W.LED indicators: power, network, phone 1, phone 2, PRT Wall mountable.Buttons: reset/problem reporting (PRT).Security: password-protected system reset to factory default/password-protected administrator and user access authority/provisioning, configuration, and authentication/HTTPS with factory-installed client certificate/Advanced Encryption Standard (AES) encryption/SIP over Transport Layer Security (TLS1.1 and TLS1.2)/Secure (encrypted) calling using Secure RTP (sRTP)/encrypted configuration files/image authentication/secure boot/Secure Shell (SSH).Provisioning and management: cloud provisioning (remote configuration)/Web-based administration/Interactive Voice Response (IVR)/Automated provisioning and upgrading via HTTP, HTTPS, and TFTP/TR-069/SSH access/Simple Network Management Protocol (SNMPv3)/Report generation and event logging/dedicated PRT button/support for RTP statistics/syslog (multilevel granularity)/ping and trace route diagnostics/configuration management: backup and restore/dual image.Power adapter: 100-240VAC at 50-60Hz (26-34VA) with 5.91' cord.Meets or exceeds the AS/NZS CISPR 32:2015 Class B, CISPR 32: 2015 Class B, EN 55032: 2015 Class B, EN 61000-3-2: 2014 Class A, EN 61000-3-3: 2013, EN 55024:2010+A1: 2015, EN 61000-4-2: 2009, EN 61000-4-3: 2006+A1:2008+A2:2010, EN 61000-4-4: 2012, EN 61000-4-5: 2014, EN 61000-4-6: 2014+AC：2015, EN 61000-4-8: 2010, EN 61000-4-11: 2004, FCC Part 15, Subpart B, ANSI C63.4-2014, ICES-003 Issue 6: 2016, ANSI C63.4-2014, VCCI-TECHNICAL REQUIREMENTS (VCCI-CISPR 32: 2016)/CISPR 32: 2015 class B standards.1-year manufacturer limited warranty

Jabra LINK 14201-32 Adapters.Enables remote electronic hook switch with Jabra wireless headsets and the Nortel/Avaya 1100 Series IP phones with USB headset port.Provides ability to answer calls while away from your desk.For use with Avaya 11XX, Jabra GN9330, GM9350, GO 6470, Pro 94XX, Nortel IP Phone 11XX.Compatible with Nortel/Avaya IP phone 1120E, Nortel/Avaya IP phone 1140E, Nortel/Avaya IP phone 1165E and Nortel/Avaya IP phone 1150E.Incorporates answer call, end call, ring tone in headset, volume control and mute control

The Jabra LINK electronic hook switch adapter provides remote electronic hook switch control (EHS) with Jabra PRO wireless headset series and NEC DT730 IP phones. It enables users to control their call directly from Jabra wireless headsets up to 450' away from their desk. It helps to answer and end calls, mute and reject calls, hear ring tone in the headset, adjust the volume and redial..Electronic hook switch adapter compatibly works with traditional desk phones.Other (360015).Comes in black color.Compatible with NEC DT730/ITL-12D-1P, NEC DT730/ITL-24D-1P, NEC DT730/ITL-32D-1P and NEC DT730/ITL-8LD-1P phones.Incorporates answer call, end call, ring tone in headset, volume control, mute, reject call and redial control.Meets CE and UL certifications or standards.Comes with 1 year limited warranty

Jabra 14201-30 Headset Adapter.Compatible w Jabra headsets: Pro 9400 GO 6470 GN9350 GN9350e GN9330e Cisco IP phones: 8961 9951 9971.Interfaces/ports: USB, Microphone.Length of cables: 900 mm.Hear ring tone in the headset, answer and end calls, adjust the volume, mute the microphone.Link your Cisco Unified IP Phone 8900/9900 to your wireless headset with this jabra Link 14201-30 electronic hook switch.

Use your desk phone headset to take calls over the Internet with this easy-to-use USB adapter. Simply plug and play to connect any compatible jabra desk phone headset to your softphone for high-quality VoIP calls. This black jabra Link 230 USB adapter is a great tool to help your office achieve a unified communications plan..Comes in black color.Protect your headset investment.Crystal clear conversation.Prevent stress and hearing injuries.Built to withstand even the toughest work environments.Jabra Link 230 is compatible with any corded Jabra QD headset and all leading brands of softphones.Add functionality to your office with this jabra Link 230 USB adapter.

Jabra LINK 14201-33 Adapter.Compatible with traditional desk phones.Length of cables: 35.43".Supports electronic hook switch, making it possible to answer/end calls to a desktop phone.Enables remote call control with Jabra headsets and the latest generation of UC and IP softphones.Features: Answer call, end call, ring tone in headset, volume control, mute control.Connectors: Connect to telephone port on headset base, connect to AUX port on headset base, connect to headset port on Avaya phone.Certification and standards: CE, FCC, C-Tick.Warranty: 2 years limited.Enjoy the freedom of responding to calls without staying tied to your desk with this Jabra Link EHS adapter.

Cord to connect a Jabra Quick Disconnect headset to phones with a 2.5 mm jack interface..Quick Disconnect, Sub-mini phone - 5".Cable length: 5".Cable type: Headset adapter.Connector on first/second end: 1 x quick disconnect/1 x sub-mini phone male.It provides a standard quick disconnect plug on one end and a 2.5 mm plug on the other.Offers a modular adapter that can be used with most cordless phones.Black.Dimensions: 8.7"H x 6.05"W x 0.01"D.GN Netcom 1005143 Stereo Mobile Adapter For 2.5 mm Headset Jack plugs into any 2.5mm headset jack in most cordless phones.

Plantronics Adapter Cable Assembly - Quickly Connect Your Devices.Mini-phone Male, Quick Disconnect Male.Right angle plug.For the computer and mobile market segments.Specializing in telephone products, such as amplified telephone headsets

In combination with the Cisco EHS-compatible phones, the CEHS-CI 01 cable for electronic hook switch is compatible with the wireless IMPACT SDW 5000, DW, SD and D 10 headset series..Electronic hook switch adapter for remote desk phone call control.Wireless technology provides unparalleled mobility.High quality sound perfect for VoIP applications.Compatible with: Cisco Unified IP Phone 7942G, 7945G, 7962G, 7965G, 7975G, IMPACT D 10, IMPACT DW Office, Office ML, Office USB, Office USB ML, Pro1, Pro2, IMPACT SDW 5011, 5013, 5014, 5015, 5016, 5031, 5033, 5034, 5035, 5036, 5061, 5063, 5064, 5065, 5066

Make your call center work more efficiently with this Plantronics electronic hook switch adapter..Note: This item was previously part number 38350-13. The part number has changed, but the product remains the same..Electronic hook switch adapter for remote desk phone call control.Wired connectivity.Compatible with Cisco desk phones.Comes in black

Evaluate training calls by connecting two headsets with this cable. It allows both agents to listen to conversations while keeping only one microphone live to avoid call confusion. This Plantronics Y-splitter adapter has a toggle switch that lets the supervisor control which microphone should be muted to provide trainee guidance..This Y-style headset cable adapter is ideal for stable connectivity of two headsets to one phone.Wired connectivity.Connector on first end: one Quick Disconnect.Connector on second end: 2 x Quick Disconnect.The Quick Disconnect (QD) capability allows the headset to detach without losing the call.Compatible with: Plantronics M12, P10, P10A, and Plantronics A 20.Comes in black color.Microphone mute switch and QD clamp are included in the pack.Manufacturer's 1-year limited warranty.Monitor agent calls with this Plantronics Y-connector adapter cable.

IP phones and analog terminal adapters (ATAs) require a network connection. LAN cabling in the office or the home can be expensive to install if not already wired. Wi-Fi networks are practically everywhere today. Poly USB Wi-Fi adapter enables USB equipped VoIP adapters or VVX phones (models with USB ports) to connect to the Internet over a Wi-Fi network. With the Poly Wi-Fi adapter, you have the freedom to place your VVX phones or VoIP adapters anywhere within range of your Wi-Fi network. Deployment tip—if you are using the WiFi adapter to connect your phone or VoIP adapter, these devices are typically powered by Power over Ethernet (PoE). So, if you are not plugging into a wired LAN with PoE and are instead using the USB Wi-Fi accessory, don't forget to also order the appropriate power adapter to power your phone or VoIP device..Wireless USB adapter enables USB-equipped VoIP adapters or VVX phones (models with USB ports) to connect to the Internet over a Wi-Fi network.Dimensions: 1.57"H x 0.63"W x 0.28"D.Designed to use both the 2.4GHz and 5GHz bands.Meets or exceeds FCC and CE standards.Workplace freedom: by enabling Wi-Fi you can place your device anywhere within the range of your Wi-Fi network.Simply transform your VoIP adapter or phone to connect to the internet.Wireless data encryption provides a high level of security.1-year manufacturer limited warranty