Cat 6 Cables

Black Box CAT6A 650-MHz Solid Ethernet Bulk Shielded Cable provides transmission performance beyond 650MHz exceeding the industry standards and ETL Verified for supporting the operation of 10Gig Ethernet applications (10GBASE-T). This cabling provides support for high-bandwidth applications such as data centers and other data-intensive or backbone requirements..CAT6A Ethernet Cable, 650-MHz Solid Ethernet Bulk Cable.Cable Length (ft) 1000.Connections First End Bare Wire, Second End Bare Wire.Gauge (AWG) 23, Jacket Type CMP, LSZH, Plenum - Color Green.Data Transfer Rate 10 Gbit/s.Features Alien Cross Talk (AXT), Near End Cross Talk (NEXT), Halogen Free.Limited Lifetime Warranty.Constructed from Internal separator, FEP insulation, dielectric tape, drain wire, aluminum/Mylar tape.A center isolation member maintains pair separation for optimal NEXT performance.CAT6A UTP comes with 0.271" outside diameter.Tested up to 650 MHz.Foil shield construction virtually eliminates alien crosstalk

Use this CAT-6 Network Patch Cable from Intellinet Network Solutions® to set up your high-performance network connections. It supports all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE and up to 10-Gbps data communications at frequencies up to 250 MHz. With a much smaller diameter than a normal CAT-6 network cable, this stranded cable nonetheless provides all the features. It gives a network cabinet's equipment a neater, more organized appearance in dense cable installations, and its smaller size helps improve air circulation. Because of its smaller size and increased flexibility, the cable is an excellent option for installations in confined spaces and around corners. This cable is appropriate for PoE applications since it is made entirely of pure bare copper, unlike other cables that are made of copper-clad aluminum (CCA) or even copper-clad steel (CCS). The contacts' gold coating protects them from corrosion in all types of environments. All of Intellinet Network Solutions' patch cables are the ideal option for high-density settings like data centers and server rooms because of their snag-free boot design. It is simple to connect and disconnect the cable plugs securely without breaking the latch thanks to strain relief and a molded boot for safety..10 pack, with each cable 20-ft. long.CAT-6 with 10G/1G and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Snag-free boots to smoothly and easily pull the cable without damaging the RJ45 connectors.Ultra-thin format for more flexibility and simplified cable management in dense installations.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B.Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty.WARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty