Cat 6 Ethernet Cables for Gaming

The Belkin 1' green CAT6 snagless patch cable improves the network speed with higher bandwidth. It has RJ45M male connectors on the both the ends for reliable connectivity. This cable is ideal for transferring VoIP, video and file. It has four pair of 24 AWG bare stranded copper conductor construction for optimal signal conductivity. The 50-micron, gold-plated connectors ensure clear transmission. It has PVC jacket for durability and the HDPE insulation for secured optimal performance. The snagless molds safeguard the cable connectors while installation..RJ-45 Male.1ft.Green.Connectivity: Wired.Bare stranded copper conductor for better conductivity and PVC jacket for added durability.Meets ISO/IEC 11801 and TIA/EIA-568-B.2-1 certifications or standards.Cable type: Cat6.Connector plating: 50 micron gold-plated Connector plating.Comes in green color.Impedance: 100 +/- 15 ohm at 1 - 550 MHz, Resistance: 93.8 ohm/km at 20 deg C max, Capacitance: 56 pF/m max.Dielectric strength: AC 1.5 kV, Spark test: 2.5 kV, Structural return loss: 8.6 dB min at 550 MHz, Propagation delay: 536 nS/100 m max at 550 MHz.Data transfer rate: 100 Mbps.Increases your network speed with higher bandwidth.Protects your network for future expansion.2-row staggered pin configuration controls cross-talk at hyper-frequency.Comes with lifetime warranty

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..It is used for networking purposes. It provides high-speed data transfer and reliable connectivity for network infrastructure..The cable length is 6 feet..Features the following connections: Connector Type: RJ45 Pin Count: 8 pins (standard for RJ45 connectors).cable is made with a 27 AWG gauge, a Low Smoke Zero Halogen (LSZH) jacket, bare copper conductors, and an Red exterior color.High-Speed Data Transfer: Supports data transfer rates up to 10 Gbps (10,000 Mbps)..Compatible with a wide range of devices that have RJ45 Ethernet ports. Here are a few examples: Computers (Desktops and Laptops), Routers, Switches..Comes with a Life time warranty.

This C2G 6' white Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is ideal for high performance networking applications..Cable length: 6'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.18 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes with lifetime warranty.15.7" black power splitter adapter cable is easy to use and install and offers maximum system expandability without having to upgrade a computer power supply for the sake of SATA (power) connections.

Monoprice® 14' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in red color has snagless strain relief boots and offers high performance..Red.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.14'.Gauge: 24 AWG.Cable rating: 550 MHz.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 14' Cat6 UTP Ethernet network cable in red color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

The 4XEM 100 ft Cat6A Snagless RJ‑45 Ethernet Patch Cable delivers high‑performance connectivity for demanding professional environments. Rated Cat6A at 500 MHz and supporting 10 Gbps, it uses 25 AWG pure copper, stranded conductors for superior signal integrity and reliability. The cable features RJ‑45 male connectors with TIA/EIA‑568B pinout and 30 µin gold‑plated contacts, ensuring clean, stable transmission. Its gray overmold snagless strain‑relief boot and PVC jacket (FT1, UL) enhance durability for long‑term use. The 100 ft length is ideal for extended patching between switches, routers, patch panels, and workstation endpoints. Fully compliant with RoHS and TIA/EIA‑568B.2, this UTP 4‑pair cable has passed PoE support testing, making it suitable for VoIP and powered network devices. Backed by a lifetime warranty, it provides dependable performance for enterprise‑grade networking..Supports networking tasks for structured LAN setups..Extends 100 feet for long‑distance patch routing..Connects using RJ‑45 male to RJ‑45 male, 568B pinout..Utilizes 25 AWG pure copper and gray PVC FT1 jacket..End 1 features RJ‑45 male for Ethernet termination..Enables 10 Gbps Cat6A throughput at 500 MHz..Works with switches, routers, and patch panels..Meets TIA/EIA‑568B.2 and RoHS compliance..Lifetime warranty for dependable use.

Introducing the StarTech Cat6a 6ft Ethernet Cable, the perfect solution for your high-speed networking needs. This cable is designed to deliver reliable and efficient connections for your 10GBASE-T networks, ensuring seamless data transfer and power delivery for your devices. Crafted with precision, the cable features 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, providing both durability and safety. The snagless design and gold-plated RJ45 connectors ensure a secure fit and minimize wear over time, making it ideal for various installation environments, from home offices to industrial settings. Whether you're connecting to switches, NAS devices, or PoE++ devices, this cable supports data transfer rates up to 10 Gbps, ensuring high-speed performance for demanding applications. Its backward compatibility with Cat 6 and Cat 5/5e standards ensures easy integration into existing network setups. Fluke Tested and ETL Verified, the StarTech Cat6a Ethernet Cable meets stringent performance standards, giving you peace of mind and assurance of quality. Upgrade your network with this reliable and versatile cable, and experience the difference in speed, reliability, and safety. Choose the StarTech Cat6a 6ft Ethernet Cable for your networking needs and enjoy a seamless and efficient connection every time..Ideal for networking applications, this cable is perfect for connecting switches, NAS devices, and PoE++ devices, ensuring reliable data transfer and power delivery..The cable measures 6 feet in length, providing a convenient reach for various installation environments, from home offices to industrial settings..Equipped with RJ45 connectors on both ends, this cable features 8-pin connections that ensure a secure and stable link between devices..Made with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, this cable is both durable and safe. The true color is purple..RJ45 Male Connector on End 1, RJ45 Male Connector on End 2.Supports data transfer rates up to 10 Gbps, ensuring high-speed and reliable network performance for demanding applications..Compatible with Cat 6, Cat 6a, and Cat 5/5e standards, making it easy to integrate into existing network setups..Fluke Tested and ETL Verified, this cable meets ANSI/TIA-568.2-D standards, ensuring top-notch performance and reliability..Comes with a Limited Lifetime Warranty, providing peace of mind and assurance of quality.

The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty

Ensure a reliable Ethernet network connection between your system and router using the Monoprice 109825 CAT-6 Cable. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-6 for seamless connection over a network.Designed to transmit data at 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.14' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.The Monoprice 109825 14' CAT-6 Ethernet Network Cable, White, supports 10 Gigabit Ethernet networks to provide uninterrupted data transfer.

The C2G ® 14' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 14'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.4 lbs..Comes with lifetime warranty

Monoprice® 2' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in green color has snagless strain relief boots and offers high performance..Green.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.2'.Gauge: 24 AWG.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 2' Cat6 UTP Ethernet network cable in green color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

The C2G ® 3' red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The 4XEM 1 ft Cat6A Snagless RJ45 Ethernet Patch Cable delivers ultra‑fast 10 Gigabit connectivity in a compact, durable design made for high‑performance networking. Built with 25 AWG pure copper stranded conductors, this cable ensures superior electrical performance and reliable signal transmission compared to CCA alternatives. Its snagless overmold strain‑relief boot protects the RJ45 connector latch from damage during frequent installations, while the FT1 UL‑rated PVC jacket provides long‑lasting flexibility and toughness. Supporting 500 MHz bandwidth, this UTP cable enables smooth data transfer, seamless VoIP performance, and efficient communication between switches, routers, and patch panels. Ideal for tight spaces, short patch panel jumps, and organized cable routing, the compact 1 ft length ensures clean cable management. Fully compliant with TIA/EIA‑568B.2 and RoHS, it is engineered for professional‑grade reliability and backed by a lifetime warranty..Ideal for tight‑space networking and short device links..Provides a 1 ft length for clean, organized cable runs..Built with RJ45 male connectors using 568B wiring..Made from 25 AWG pure copper with a blue PVC jacket..Handles 500 MHz bandwidth for stable performance..Uses RJ45 terminals for dependable Ethernet links..Supports 10 Gbps speeds for high‑speed transfers..Compatible with switches, routers, and patch panels..Complies with RoHS and TIA/EIA‑568B.2 standards..Lifetime warranty for long‑term use.

The C2G 3975 6' black Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Category 6 for Network Device.RJ-45 Male.6ft.Black.Certifications & Standards: TIA/EIA.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Comes with lifetime warranty

The 4XEM 25 ft Cat6A Patch Cable is built for reliable, high‑speed Ethernet connectivity in professional and home networks. Using standard RJ45 connectors on both ends, it supports 10 Gbps performance typical of Cat6A cabling over a convenient 25‑foot length, ideal for connecting switches, routers, patch panels, and endpoints. The blue jacket makes cable identification simple in racks and office environments. Designed to meet common structured cabling practices, this patch cord is a straightforward choice for clean installations, equipment moves, and daily network operations. Whether you are expanding a LAN, organizing a rack, or making direct device connections, the 4XEM Cat6A patch cable provides dependable throughput and consistent performance to keep your network running smoothly. Pair it with keystones and patch panels for a tidy, scalable setup..Supports networking use across office and rack setups..Measures 25 feet to simplify clean patch runs..Connects via RJ‑45 male to RJ‑45 male, TIA/EIA‑568B pinout..Built with 25 AWG stranded pure copper; blue PVC FT1 jacket..End 1 uses RJ‑45 male for standard Ethernet terminations..End 2 uses RJ‑45 male for straightforward device links..Delivers Cat6A 10 Gbps throughput at 500 MHz bandwidth..Compatible with switches, routers, patch panels, LAN gear..Meets TIA/EIA‑568B.2 and RoHS compliance requirements..Lifetime warranty for enduring reliability.

This C2G 50' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is useful for high performance networking applications..Cable length: 50'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 1.38 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Kensington Technology Mobile Tablets Blue Kensington Trapper Keeper Universal Case - Designed with a mead-inspired style

Monoprice® 3' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in blue color has snagless strain relief boots and offers high performance..Blue.Cat6.Features molded, snagless strain-relief boots.3'.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 3' Cat6 UTP Ethernet network cable in blue color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

The C2G ® 7' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty.StarTech.com® HDMM10 10' HDMI Cable with ultra HD male/male HDMI connectors supports 4k x 2k video signal. Offers multimedia interface with clear audio/video signal.

The C2G ® 1' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 1'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.05 lbs..Comes with lifetime warranty.Comes with lifetime warranty

With a polyvinyl chloride jacket, the StarTech C6PATCH12GN 6' green molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Category 6 patch cable connects workstation to wall outlet.Convenient length of 6'.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.Meets CSA TIA/EIA-568B standards and RoHS Green compliant.Comes in green color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to ensure high-performance capability for your demanding Ethernet applications, such as Power over Ethernet.Manufactured using high-quality copper conductors to provide highest value for your cable investment.Patches from hub to distribution panel.Carefully constructed and tested to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

The C2G ® 3' red Cat6 snagless shielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 26 AWG bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 3'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in red color.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.High quality cable and plug construction effectively minimizes near-end crosstalk levels.Protects from EMI/RFI interference.Weight: 0.05 lbs..Comes with lifetime warranty.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in black.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The 4XEM 100 ft Cat6A Snagless RJ45 Ethernet Patch Cable delivers reliable and ultra‑fast 10 Gigabit connectivity for enterprise, business, and educational networks. Built with 25 AWG pure copper stranded conductors, this cable ensures superior signal integrity and performance compared to CCA alternatives. The snagless overmold strain‑relief boot prevents latch damage during installation, while the FT1 UL‑rated PVC jacket delivers long‑lasting durability and flexibility. Supporting 500 MHz bandwidth, this UTP cable enables smooth data transmission, stable VoIP communication, video streaming, and high‑speed file transfers. With a generous 100 ft length, it is ideal for routing connections across server rooms, offices, and structured wiring spaces. Fully compliant with TIA/EIA‑568B.2 and RoHS, this Cat6A cable is engineered for professional‑grade performance and backed by a lifetime warranty for long‑term reliability..Designed for networking across long device connections..Extends reach with a 100 ft cable length..Equipped with RJ45 male connectors using 568B wiring..Built with 25 AWG pure copper and a blue PVC jacket..Delivers 500 MHz bandwidth for strong signal flow..Uses RJ45 terminals for dependable Ethernet links..Enables 10 Gbps speeds for heavy network use..Works with routers, switches, and patch panels..Complies with RoHS and TIA/EIA‑568B.2 standards..Lifetime warranty for lasting value.

The C2G® 7' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.21 lbs..Comes with lifetime warranty

Comprehensive CAT6 550 MHz snagless patch cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief. Comprehensive CAT6 550 MHz snagless patch cables meet all CAT6 TIA/EIA standards and greatly reduce loss compared to standard 100Mhz cable..CAT6 550 MHz snagless patch cable designed for fast Ethernet networks.Cable length: 7'.Features a gold-plated RJ45 (male) connector on each end.Four twisted pairs 24 AWG bare copper stranded cable with a durable PVC jacket; comes in black.Supports voice/data/video distribution applications up to 550 MHz.Have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief.Applications include: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN, 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps A, 622A and T1 Voice.Lifetime limited manufacturer warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

C2G® 6' CAT6 Snagless network patch cable in green color has RJ-45 male connectors on both ends and minimizes near end crosstalk levels. Cable has molded, snag less boot prevents unwanted cable snags during installation..Dimensions: 6'L.For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high-performance networking applications.Connector: 1 x RJ-45 male on first and second end.Conductor: Copper.Cable type: Category 6.Green.Snagless design protects clips when plugging and unplugging.Unshielded twisted pair wires.Weight: 0.174 lbs..Warranty: Lifetime.C2G® 6' CAT6 Snagless network patch cable in green color is constructed from high quality copper and is ideal for bandwidth intensive voice, data or video distribution applications.

The C2G 3975 6' blue Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Dimensions: 6'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Type: Patch cable - CAT 6.Technology: UTP.Wiring Scheme: T568B.Wires per Cable: 8 wires.Features: Snagless, stranded , minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Manufacturer Warranty: Limited lifetime warranty

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is gray..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

StarTech shielded Cat6a cables ensure fast and dependable 10 Gigabit network connections by protecting against electromagnetic interference (EMI/RFI) and noise. The result is a fast and safe network. Each cable is tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Plus, the RJ45 connectors are both snagless and molded to prevent damage to the connector clips and the cable. This helps to avoid accidental disconnections and decreases in network performance..CAT-6a snagless shielded (STP) Ethernet network patch cable designed for error-free 10Gbps multi-gigabit connections.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality 100% stranded copper and features a Low Smoke Zero Halogen (LSZH) jacket; comes in white.Snagless molded boots protect the tab/latch on each RJ45 connector.Tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks.Meets the ANSI/TIA-568.2-D standards for patch cord performance.The 27 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.Braided construction resists damage from bending.Supports PoE devices up to 100W PoE++.Lifetime limited manufacturer warranty

The C2G ® 1' male/male Cat6 blue snagless shielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. It safeguards high-speed network from noise and electromagnetic interference. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. It has aluminum foil shielding to get rid of EMI/RFI interference to ensure reliable error-free data communications. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 1'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in blue color.Voltage rating: 30 V.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.Offers immense protection from EMI/RFI interference.High quality cable and plugs construction minimizes near-end crosstalk (NEXT) levels.Weight: 0.05 lbs..Comes with lifetime warranty

10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty

The 4XEM 3 ft. Cat6A Snagless RJ45 Ethernet Patch Cable delivers fast and reliable 10 Gigabit connectivity for professional, business, and educational networks. Built with 25 AWG pure copper stranded conductors, it ensures superior signal integrity, reduced resistance, and stronger performance than CCA alternatives. The snagless overmold strain‑relief boot protects the RJ45 latch during frequent installs, while the ft.1 UL‑rated PVC jacket provides flexibility and long‑lasting durability. Supporting 500 MHz bandwidth, this UTP cable enables smooth data transfers, seamless VoIP communication, and high‑quality video streaming. With a compact 3 ft. length, it is ideal for tight spaces, patch panels, and organized cable routing. Fully compliant with TIA/EIA‑568B.2 and RoHS standards, this cable ensures reliable performance across all standard Ethernet devices and comes backed by a lifetime warranty..Built for networking use in offices, labs, and enterprise setups..Comes in a compact 3 ft length for short device links..Equipped with RJ45 male connectors using 568B wiring..Made with 25 AWG pure copper and a blue PVC jacket..Provides 500 MHz bandwidth for fast signal delivery..Uses RJ45 terminals for stable Ethernet connectivity..Supports 10 Gbps transfer rates for high‑speed traffic..Works with switches, routers, and patch panel systems..Meets RoHS and TIA/EIA‑568B.2 compliance standards..Lifetime warranty for trusted durability.

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

Deliver high-performance 10 Gigabit network connections, free of noise and EMI/RFI interference. This Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections. Find the length and color you needThis 6-foot black patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6a patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Reliable Cat6a 10 Gigabit connectionsEach cable is tested for up to 500MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amounts of EMI. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance. The C6ASPAT6BK is backed by StarTech.com's lifetime warranty for guaranteed reliability..Protect your data against noise and EMI/RFI interference.RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Black PVC jacket for color coding your connections

The Comprehensive® 25' gray Cat6 snagless patch cable is perfect for network devices. It has one RJ-45 male connector on both ends for reliable connectivity. This cable features 4-pair 24 AWG stranded copper conductors and 50 u gold-plated copper alloy contact for excellent conductivity. It supports voice/data/video distribution applications up to 550 MHz. The snagless boot offers easy installation. The X-traflex PVC jacket of this patch cable withstands rigorous usage..Patch cable is great for voice, data and video distribution applications.Cable length: 25'.Connections: One RJ-45 male connector on both ends.X-traflex PVC jacket for added durability and 4-pair 24 AWG stranded bare copper conductor for excellent signal transmission.Meets RoHS, UL and EIA/TIA 568B.2 certification or standards.50 u gold contacts with copper alloy plating offers maximum conductivity.Comes in gray color.Diameter: 6.2 mm outer jacket.DC resistance: 9.8 ohm at 100 m (maximum) conductor.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Snagless boot offers easy and simple installation.Perfect for Gigabit 1000/100/10 BASE-T, 4/16 Mbps token ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps A, 622A and T1 voice applications.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.50' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.6' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

CAT-6 for seamless connection over a network.Gold-plated RJ-45 male connectors on both sides for easy connectivity.100' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

The C2G ® 6" RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. It features RJ-45 male connectors on both ends for enhanced connectivity. The 24 AWG stranded bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. This bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modems, DSL/cable modems, patch panels and other high performance networking applications..Type: Network Cable.Cable Type: Category 6.Cable Length: 0.5'.Size: 6".Color: Blue.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Diameter: 6.2 mm + 0.03 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.03 lbs..Comes with lifetime warranty.952 C2G - KVM & Networking 6" Cat6 Snagless Unshielded Network Patch Cable - Exponentially reduces impedence and structural return losses

Tripp Lite 5-ft. Cat6 Gigabit Snagless Molded Patch Cable.Category 6 for Network Device.Patch Cable.5 ft.1 x RJ-45 Male Network.Purple

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..it is used for Networking and suitable for high-performance Ethernet connections Ensuring reliable and high-speed data transfer in network setups for various devices..The cable length is 75 feet..Has the following connections: Connectors: RJ45 (male) on both ends Pins: 8 pins in each RJ45 connector.27 AWG cable with a low smoke zero halogen (LSZH) jacket, featuring pure bare copper conductors and a black exterior.Compatible with the following devices: Computers , Printers , Routers.Comes with a Lifetime warranty.

Deliver high-performance 10 Gigabit network connections, free of noise and EMI/RFI interference. This Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections. Find the length and color you needThis 6-foot blue patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6a patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Reliable Cat6a 10 Gigabit connectionsEach cable is tested for up to 500MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amounts of EMI. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance. The C6ASPAT6BL is backed by StarTech.com's lifetime warranty for guaranteed reliability..Protect your data against noise and EMI/RFI interference.RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Blue PVC jacket for color coding your connections

The 4XEM 250 ft. CAT6 Pure Copper CMR Riser Bulk Cable is engineered for high‑performance network installations that require superior reliability and fire‑safe riser‑rated construction. Featuring 23 AWG solid pure copper conductors, this premium cable delivers excellent conductivity, low attenuation, and stable data transmission for LAN networks, VoIP systems, and high‑bandwidth applications. Its CMR‑rated PVC jacket is designed for safe in‑wall and vertical riser runs between floors, ensuring long‑term performance while meeting strict building codes. Supporting up to 550 MHz, this U/UTP cable enables strong Gigabit and 10GBASE‑T performance over appropriate distances. Designed for custom‑length runs, the 250 ft. bulk roll offers flexibility for professional cabling projects. Fully compliant with ANSI/TIA‑568.2‑E, ISO/IEC 11801, and RoHS, it provides dependable, future‑ready network infrastructure backed by a lifetime warranty..Ideal for riser‑rated networking and in‑wall installations..Provides 250 ft length for custom cabling projects..Built with solid 23 AWG pure copper conductors..Features a blue PVC CMR fire‑rated outer jacket..Supports 550 MHz bandwidth for strong performance..Supplied as connector‑free bulk cable for easy termination..Delivers 10 Gbps speeds for high‑demand network traffic..Works with patch panels, keystones, and structured wiring..Meets ANSI/TIA‑568.2‑E, ISO/IEC 11801, and RoHS standards..Lifetime warranty for long‑term value.

Monoprice® Flexboot Series 7' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in black color has snagless strain relief boots and offers high performance..Black.Cat6 Cable.Fixed length network cables are the perfect combination of value and performance.7' Length.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 7' Cat6 UTP Ethernet network cable in black color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

Monoprice® Flexboot Series 10' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in blue color has snagless strain relief boots and offers high performance..Blue.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.10'.Gauge: 24 AWG.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 10' Cat6 UTP Ethernet network cable in blue color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

The C2G ® 50' male to male category 6 snagless blue patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 50'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Features durable polycarbonate connector and four twisted pair 24 AWG stranded bare copper for good conductivity.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Unshielded twisted pair technology for less signal loss.Comes in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 1.35 lbs..Comes with lifetime warranty

Monoprice® Flexboot Series 10' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in green color has snagless strain relief boots and offers high performance..Green.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.10'.Gauge: 24 AWG.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 10' Cat6 UTP Ethernet network cable in green color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.