Cat6 Cables 4 Pair

With RJ-45 male-to-male connectors, this high-performance Category 6 UTP Patch Cable is an ideal performance upgrade for any network. PowerSum tested and exceeding performance requirements for Category 6, its internal load bar assures accurate positioning of pairs and consistent high performance. Its 2-row, staggered pin configuration controls cross-talk at hyper-frequencies. Use it to replace any Cat5 cable that fails to support 1000BaseT Gigabit Ethernet..Maximize your network speed with a 7-foot high-bandwidth CAT6 cable..Ideal for VoIP, video, and file transfers.Exceeds 500MHz in performance tests.CAT6 Ethernet patch cable for connecting to LANs or the Internet.Ideal for use with 100-1000BASE-T networks.RJ45 plugs with 50-micron gold-plated connectors for clear signal.4 twisted pairs of stranded copper wires prevent crosstalk.UTP stranded copper wires.Snagless design prevents cracking and breaking.Durable PVC jacket.RJ45 plugs with 50-micron gold-plated connectors.Molded strain relief.Belkin Lifetime Warranty.This cable is perfect for connecting 10/100/1000 networks and capable of improving return loss in your current network by 40%. 50 micron gold-plated connectors ensure clean, clear transmissions.

The C2G 3' green Cat6 snagless patch cable is suitable for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. It has one RJ-45 - male connector on both the ends for reliable connectivity. The 24-AWG stranded copper conductors ensure optimal signal conductivity. It has HDPE insulation and PVC jacket for long lasting durability. The unshielded twisted pairs reduce interference and structural return loss. This cable with snagless design protects the connectors from damaged to offer long period optimal performance..Cat6 UTP patch cable with snagless design protect clips while plugging and unplugging.Cable length: 3'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG (7/0.20) copper conductors for better conductivity.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in green color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

The C2G® 7' male to male category 6 yellow snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in yellow color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.22 lbs..Comes with lifetime warranty

The Comprehensive® CAT6B-1000 bare wire Cat6 solid bulk cable in blue, has a PVC jacket and for added protection. This cable measuring 1000' has 4 twisted pairs solid bare copper conductors that assures high conductivity. The cable is suitable for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155 and all proposed Category 6 requirements for high-speed, full duplex and parallel transmission protocols..Bulk cable is perfect for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN, Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5).Cable length: 1000'.Connections: Bare wire to bare wire.Wired connectivity.Gauge: 24 AWG.Material: PVC jacket, conductor: 4 twisted pairs solid bare copper.Meets Cat6 TIA/EIA, EIA/TIA 568B.2, RoHS standards.Bandwidth: 550 MHz.Conductor resistance: 9.8 Ohm at 100 m.Outer diameter: 6.2 mm.Polyethylene separator for enhanced NEXT, ELFEXT and RL bandwidth.CM/CMG rated for single floor, general purpose use in walls and ceilings.Durable, high-density polyethylene insulation, PVC jacket.Weight: 27 lbs..Comes with lifetime warranty.Blue 1000' bulk cable features durable, high-density polyethylene insulation, PVC jacket.

Monoprice® Flexboot Series 7' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in black color has snagless strain relief boots and offers high performance..Black.Cat6 Cable.Fixed length network cables are the perfect combination of value and performance.7' Length.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 7' Cat6 UTP Ethernet network cable in black color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G ® 3' red Cat6 snagless shielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 26 AWG bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 3'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in red color.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.High quality cable and plug construction effectively minimizes near-end crosstalk levels.Protects from EMI/RFI interference.Weight: 0.05 lbs..Comes with lifetime warranty.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments

Monoprice® Flexboot Series 25' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in black color has snagless strain relief boots and offers high performance..Black.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.25'.Gauge: 24 AWG.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 25' Cat6 UTP Ethernet network cable in black color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

This C2G 50' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is useful for high performance networking applications..Cable length: 50'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 1.38 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Kensington Technology Mobile Tablets Blue Kensington Trapper Keeper Universal Case - Designed with a mead-inspired style

15 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Black CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH15BK10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 15 ft. (4.6 m) Color: Black | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 15 ft. Black patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Black snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Black | Lifetime Warranty

The C2G ® 10' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Yellow

Snagless molded patch cable..White.Category 6 RJ45 Male/RJ45 Male.Snagless, molded.5'.Material: Polyvinyl chloride(PVC) jacket.Conductor: Copper.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Communications: 550 MHz/1 Gbps.All cables feature boots with integral strain-relief and RJ45 (Male) connectors.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.TSB 568B (AT and T 258A)wiring.Includes 5' Cat6 gray Gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited

The C2G 3975 6' blue Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Dimensions: 6'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Type: Patch cable - CAT 6.Technology: UTP.Wiring Scheme: T568B.Wires per Cable: 8 wires.Features: Snagless, stranded , minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Manufacturer Warranty: Limited lifetime warranty

Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.50' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.1 x RJ45 male connector A/B.PVC 4-pair stranded UTP.25'.Conductor: Copper.System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA application.Feature molded connectors with integral strain relief.High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.Deliver stable performance up to 550MHz/1 Gbps communication

Snagless molded patch cable..White.Category 6 RJ45 male/RJ45 male.Molded connectors with integral strain relief.14'.Material: Polyvinyl chloride (PVC) jacket.Conductor: Copper.Device supported: Network device.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Wires per cable: 8 wires, Pairs per cable: 4 pairs, Wiring scheme: T568B.Communications: 550 MHz/1 Gbps.Deliver stable performance up to 550 MHz/1 Gbps communication.Drastically reduce impedance and structural return loss compared to standard 100 MHz wire.Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.Includes 14' Cat6 white gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

1 each.Up to 100MB per second for high bandwidth.Ideal for high-speed Internet access, home/small-office networking and audio/video distribution

The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The Belkin® RJ45 Performance Category 6 UTP patch cable is the perfect performance upgrade. Used to replace any Cat 5 cable that fails to support 100 Base-T or Gigabit Ethernet. Includes RJ45 male-to-male connectors and a snagless molded strain relief. Sn agless molds protect the RJ45 tap from being damaged during installation. Internal load bar assures accurate positioning of pairs and consistent high performance. 2-row staggered pin configuration to control cross-talk at hyper-frequency. Capable of impro ving the return loss in your current network by 40%!.Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.50 micron gold plated connectors to ensure a clean and clear transmission.Exceeds the performance requirement of Category 6; PowerSum tested.Black color; 100' length.Manufacturer's lifetime warranty.Belkin™ 100' CAT6 Snagless patch cable in black color in gray color is capable of improving the return loss in current network by 40 percent and is compatible with 100 Base-T.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

The C2G 31341 5' Cat6 snagless white network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The N201-001-PU Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this one-foot purple cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Manufactured from 24 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded UTP N201-001-PU delivers speeds up to 550 MHz/1 Gbps with minimal near-end crosstalk (NeXT)..Rated for 550 MHz/1 Gbps communications.Snagless RJ45 connectors protect against broken tabs.Meets Cat6 TIA/EIA standards.High-quality 24 AWG stranded copper wire.Reduces impedance and structural return loss.Certification and Standards: RoHS

C2G® 6' CAT6 Snagless network patch cable in green color has RJ-45 male connectors on both ends and minimizes near end crosstalk levels. Cable has molded, snag less boot prevents unwanted cable snags during installation..Dimensions: 6'L.For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high-performance networking applications.Connector: 1 x RJ-45 male on first and second end.Conductor: Copper.Cable type: Category 6.Green.Snagless design protects clips when plugging and unplugging.Unshielded twisted pair wires.Weight: 0.174 lbs..Warranty: Lifetime.C2G® 6' CAT6 Snagless network patch cable in green color is constructed from high quality copper and is ideal for bandwidth intensive voice, data or video distribution applications.

Tripp Lite® 14' Cat6 molded patch cable in blue color has snagless pattern that offers protection for locking tabs on RJ45 male connectors. Cable with 4 pair stranded UTP is ideal for application requiring stable performance up to 550MHz/1 Gb/s..Blue.Cable type: Category 6.Cable length: 14'.Material: Polyvinyl chloride (PVC) jacket.Connector details: 1 x RJ-45 male network on first and second end.Technology: Unshielded twisted pair (UTP).Conductor: Copper, Wires per cable: 8, Pairs per cable: 4.Features: Snagless, molded.Application: Computer networking.System requirements: or 1000 Base-T (1Gbps Ethernet), 10/100 Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring TYPE 3 applications as well as EIA/TIA applications.Drastically reduce impedance and structural return loss, staggered-pin plug design to keep near-end crosstalk levels to a minimum.Integral strain relief.Certification and Standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL, RoHS.Warranty: Lifetime limited.Tripp Lite® 14' Cat6 molded patch cable in blue color featuring high quality copper wire and a staggered-pin plug offers guaranteed performance in minimizing near-end crosstalk levels.

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in black.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

Bulk cable..Black.Category 6 bare wire/bare wire.Durable, high-density polyethylene insulation, PVC jacket.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, polyethylene, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, CMG, MPR.Outer diameter: 6.2 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 9.8 Ohm at 100 m.Polyethylene separator for enhanced NEXT, ELFEXT and RL bandwidth.Ideal for 10Base-T, 100BASE-TX, 1000Base-TX, 100 Vg-AnyLAN, token ring, TP-PMD, 350 Mbps CDDI, ATM 155, and all proposed Category 6 requirements for high-speed, full duplex, parallel transmission protocols.CM/CMG rated for single floor, general purpose use in walls and ceilings.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

StarTech.com® UTP Cat 6 Patch cable in black color offers reliable signal routing in IT hardware of 500 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 25' cable has eight 24 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Snagless design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Easy-to-install 25' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.Snagless cable offers flexibility.Meets CMG flame retardant test to minimize fire hazards.4 pair UTP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.CAT6 rated cable provides performance of up to 500 MHz.50 micron Gold-plated connector plating for good conductivity.Molded strain relief design avoids the cable from being bent at sharp angles at the RJ45 connector.Ensure high-performance capability for your demanding ethernet applications.Meets all requirements and standards of RoHS, Wiring Standard: TIA/EIA-568-B.1-2001 T568B.Includes 1 x 25' black snagless ETL verified Cat6 UTP patch cable.Designed for use with Gigabit networks, patches from hub to distribution panel.Comes with limited lifetime warranty.StarTech.com® N6PATCH25BK 25' Black UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Tripp Lite® 25' Cat6 RJ45 Male/Male Gigabit Snagless Molded Patch Cable, Red.Red.Cable type: Category 6.Cable length: 25'.Material: Polyvinyl chloride (PVC) jacket.Connector details: 1 x RJ-45 male network on first and second end.Technology: Unshielded twisted pair (UTP).Conductor: Copper, Wires per cable: 8, Pairs per cable: 4.Features: Snagless, molded.Rated for 550 MHz/1 Gbps communication.Application: Computer networking.System requirements: For 1000 Base-T (1Gbps Ethernet), 10/100 Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring TYPE 3 applications as well as EIA/TIA applications.Drastically reduce impedance and structural return loss, staggered-pin plug design to keep near-end crosstalk levels to a minimum.Integral strain relief.Certification and Standards: UL, IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL.Warranty: Lifetime limited.Tripp Lite® 25' Cat6 molded patch cable in red color featuring high quality copper wire and a staggered-pin plug offers guaranteed performance in minimizing near-end crosstalk levels.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

The Comprehensive® 7' snagless Cat6 patch cable in blue color, has one RJ-45 male connector on both the ends. The 24 AWG bare copper conductor and 50-micron gold plated connector ensure optimal signal conductivity. With its polyvinyl chloride jacket, this patch cable ensures long lasting durability. It features snagless boot to offer easy installation..Snagless patch cable for distributing data, voice and video on today's high speed Ethernet and gigabit networks.Cable length: 7'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Bare copper, Jacket: Polyvinyl chloride (PVC), Connector: Polycarbonate.Meets RoHS, UL, Cat6 TIA/EIA, EIA/TIA 568B.2 certifications and standards.Color: Blue, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 550 MHz, Number of conductors: 4 twisted pairs.Conductor DC resistance: 9.8 ohm at 100 m max.Snagless boot for easy installation.Weight: 5 lbs..Comes with lifetime warranty

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.50' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The Comprehensive® 10' black RJ-45 male/male Cat6 patch cable features snagless boot for easy/quick installation and provides better strain relief. It has 24 AWG stranded construction, X-traflex jacket for enhanced protection and copper alloy plated with 50u gold contacts for optimum conductivity. This 550 MHz snagless patch cable is perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 100 VG-AnyLAN, 100 Mbps TP-PMD, 4/16 Mbps token ring, 55/155 Mbps A, 622A and T1 voice applications..Cat 6 patch cable for network devices.Cable length: 10'.Connections: RJ-45 male on both ends.Connectivity: Wired.Copper conductors for better conductivity and a PVC jacket for added safety.Meets RoHS, EIA/TIA 568B.2 and UL certifications and standards.Connector finish: 50-micron gold.Comes in black color.Wire gauge: 24 AWG.Bandwidth: 550 MHz.Outer diameter: 6.2 mm.DC resistance: 9.8 Ohm at 100 m, Jacket type: X-traflex.Supports network device.Molded snagless boot, stranded.Weight: 0.3 lbs..Comes with lifetime warranty

With a polyvinyl chloride jacket, the StarTech C6PATCH5YL 5' yellow molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Category 6 patch cable connects workstation to wall outlet.Convenient length of 5'.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.Meets CSA TIA/EIA-568B standards and RoHS Green compliant.Comes in yellow color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to ensure high-performance capability for your demanding Ethernet applications, such as Power over Ethernet.Manufactured using high-quality copper conductors to provide highest value for your cable investment.Patches from hub to distribution panel.Constructed and tested to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

Ensure a reliable Ethernet network connection between your system and router using the Comprehensive CAT6-25BLK CAT-6 Cable. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor. With its snagless design, the cable does not snap during installation and its connector clips remain protected..CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.25' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

Tripp Lite 5' Molded patch cable in red color has snagless design to protect the locking tabs on the RJ45 male connectors. Cable is constructed from PVC 4-pair stranded UTP and reduces cross-talk or return loss..Red.Category 6 RJ45 Male/RJ45 Male.Snagless, molded.5'.Material: Polyvinyl chloride(PVC) jacket.Conductor: Copper.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Communications: 550 MHz/1 Gbps.All cables feature boots with integral strain-relief and RJ45 (Male) connectors.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.TSB 568B (AT and T 258A)wiring.Includes 5' Cat6 gray Gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited.Tripp Lite 5' Molded patch cable in red color is rated for 550 MHz/1 Gb/s communications and provides premium cabling for category 6, 5 and 5e applications.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Deliver high-performance 10 Gigabit network connections, free of noise and EMI/RFI interference. This Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections. Find the length and color you needThis 4-foot blue patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6a patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Reliable Cat6a 10 Gigabit connectionsEach cable is tested for up to 500MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amounts of EMI. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance. The C6ASPAT4BL is backed by StarTech.com's lifetime warranty for guaranteed reliability..Protect your data against noise and EMI/RFI interference.RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Blue PVC jacket for color coding your connections

Tripp Lite® 50' Cat6 molded patch cable in blue color has snagless pattern that offers protection for locking tabs on RJ45 male connectors. Cable with 4 pair stranded UTP is ideal for application requiring stable performance up to 550MHz/1 Gb/s..CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.50' CAT-6 for easy tethering.Comes with a lifetime limited warranty

C2G® CAT6 UTP Patch cable in white color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 10' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 10' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in white color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.29 lb.Comes with lifetime warranty.C2G® 27163 10' White CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

With a polyvinyl chloride jacket, the StarTech C6PATCH12GN 6' green molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Category 6 patch cable connects workstation to wall outlet.Convenient length of 6'.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.Meets CSA TIA/EIA-568B standards and RoHS Green compliant.Comes in green color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to ensure high-performance capability for your demanding Ethernet applications, such as Power over Ethernet.Manufactured using high-quality copper conductors to provide highest value for your cable investment.Patches from hub to distribution panel.Carefully constructed and tested to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

The C2G 27152 7' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 7'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The Tripp Lite 2' black Cat6 Gigabit snagless molded patch cable features RJ-45 gold-plated male connectors on both the ends for clean and clear transmission. It has four twisted pairs 24 AWG stranded copper conductor for better conductivity and PVC jacket for added durability. Patch cable has molded connectors with integral strain relief added security and durability. It is great for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type-3 applications. Cable featuring data transfer rate of 1 Gbps, is suitable for use with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems. Snagless design of cable effectively avoids locking connector tabs from damage while installing..Cat6 gigabit snagless molded patch cable is perfect for home or office.Cable length: 2'.Connections: One RJ-45 male connector on both ends.PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.RoHS compliant.Gold-plated copper contacts for maximum conductivity.Compatible with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems.Comes in black color.Data transfer rate: 1 Gbps.Bandwidth: Rated for 550 MHz.Snagless design aids to avoid locking connector tabs from damage while installing.Perfect for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications.Comes with lifetime limited warranty

The Tripp Lite 1' black Cat6 Gigabit snagless molded patch cable features RJ-45 gold-plated male connectors on both the ends for clean and clear transmission. It has four twisted pairs 24 AWG stranded copper conductor for better conductivity and PVC jacket for added durability. Patch cable has molded connectors with integral strain relief added security and durability. It is great for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type-3 applications. Cable featuring data transfer rate of 1 Gbps, is suitable for use with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems. Snagless design of cable effectively avoids locking connector tabs from damage while installing..Cat6 gigabit snagless molded patch cable is perfect for home or office.Cable length: 1'.Connections: One RJ-45 male connector on both ends.PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.RoHS compliant.Gold-plated copper contacts for maximum conductivity.Compatible with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems.Comes in black color.Data transfer rate: 1 Gbps.Bandwidth: Rated for 550 MHz.Snagless design aids to avoid locking connector tabs from damage while installing.Perfect for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications.Comes with lifetime limited warranty

Tripp Lite® 25' Cat6 molded patch cable in blue color has snagless pattern that offers protection for locking tabs on RJ45 male connectors. Cable with 4 pair stranded UTP is ideal for application requiring stable performance up to 550MHz/1 Gb/s..25ft.1 x RJ-45 Male.Blue.Material: Polyvinyl chloride (PVC) jacket.Connector details: 1 x RJ-45 male network on first and second end.Technology: Unshielded twisted pair (UTP).Conductor: Copper, Wires per cable: 8, Pairs per cable: 4.Features: Snagless, molded.Application: Computer networking.System requirements: or 1000 Base-T (1Gbps Ethernet), 10/100 Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring TYPE 3 applications as well as EIA/TIA applications.Drastically reduce impedance and structural return loss, staggered-pin plug design to keep near-end crosstalk levels to a minimum.Integral strain relief.Certification and Standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL, RoHS.Warranty: Lifetime limited.Tripp Lite 25' Cat6 Gigabit snagless molded patch cable in blue color has a molded design to provide reliable performance and enables high speed distribution of data, voice as well as video.