Connectable Shelves

Tennsco Add-on Unit for snap-together open shelving has evenly distributed 200 lbs. to 300 lbs. per shelf holding capacity. Shelf unit with 12" deep shelves include shelf support with five-file dividers per shelf..Heavy-duty rolled-steel construction with sand finish.36" x 88".Units snap together without tools and fasteners.Uses half the floor space of conventional files.200- to 300-lb capacity per shelf.Starter set provides a single freestanding unit.Add-on units form a complete wall system.All shelves are adjustable.Order one starter set and any number of matching-height add-on units.Two "L" uprights form the same frame.Add-on unit is a "T"-shaped upright that attaches to Starter Set to join units.Tennsco Add-on Unit for snap-together open shelving with 7 shelves measures 88" x 36" x 12".

The AD74-1836C Chrome Wire Shelving Add-On Kit has been specifically designed to expand Chrome Wire Shelving Starter Kits. A set of posts is shared between the two kits. Each Add-On Kit comes with 2 posts, 4 shelves and 8 S-hooks..36" x 18" x 74".800 lb. capacity.1/each.Chrome Finish

The AD74-2448C Chrome Wire Shelving Add-On Kit is used to extend the storage space of a Chrome Wire Shelving Starter Kit. It can be installed in a back-to-back, sideways or right angle configuration. Each wire shelf allows air to circulate freely and has a load capacity of 800 lbs..48" x 24" x 74".800 lb. capacity.1/each.Chrome Finish

The AD74-2436C Chrome Wire Shelving Add-On Kit can be attached to a Chrome Starter Kit to extend its storage capacity. This can be done in a number of configurations including parallel, side to side and right angle arrangements. Comes with four shelves (800 lbs. of weight capacity each), two posts and eight S-Hooks.36" x 24" x 74".800 lb. capacity.1/each.Chrome Finish

The AD74-2460C Chrome Wire Shelving Add-On Kit allows for the extension of a corresponding Chrome Wire Shelving Starter Kit. It can be installed in a parallel, side to side or right angle configuration. Each wire shelf allows air to circulate freely and has a load capacity of 600 lbs. Each Add-On Kit comes with 2 posts, 4 shelves and 8 S-hooks..60" x 24" x 74".600 lb. capacity.1/each.Chrome Finish

Tennsco Add-on Unit for snap-together open shelving has evenly distributed 200 lbs to 300 lbs per shelf holding capacity. Shelf unit with 12" deep shelves includes shelf supports and five-file dividers/shelf..200 lb to 300 lb per shelf holding capacity if evenly distributed.Dimensions: 88"H x 48"W x 12"D.Ready To Assemble (Units snap together without tools or fasteners).12 inch deep shelves.Sand finish heavy-duty steel construction.T shaped upright attaches to Starter set (sku 350886) to join units.Set includes shelves, shelf supports and five file dividers per shelf.Shelves are adjustable.Starter unit (sku 350886) required to use this item.Mfr. limited lifetime warranty.Closed add-on unit—T shaped upright attaches to starter set shelving unit (item# 128848PCSD) to join units together.Includes adjustable 12" deep shelves, shelf supports and five file dividers per shelf.Heavy-duty rolled steel construction.Sand finish.200- to 300-lb. load capacity per shelf (with weight evenly distributed).Units snap together without tools or fasteners.All shelves are adjustable.44x88".7 shelves.Shpg. wt. 147lbs..Heavy-duty rolled-steel construction with sand finish.Units snap together without tools and fasteners.Uses half the floor space of conventional files.Starter set provides a single freestanding unit.Add-on units form a complete wall system.Order one starter set and any number of matching-height add-on units.Two "L" uprights form the same frame.Add-on unit is a "T"-shaped upright that attaches to Starter Set to join units.Tennsco Add-on Unit for snap-together open shelving with 7 shelves measures 88" x 48" x 12".

The WR74-1848C Chrome Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. This unit is suitable for use in dry areas. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit..Adjustable Open Wire Shelving - Starter Units.48" x 18" x 74".800 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish

The WR74-1836C Open Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit..Adjustable Open Wire Shelving - Starter Units.36" x 18" x 74".800 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish

The WR74-1860C Chrome Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit..Adjustable Open Wire Shelving - Starter Units.60" x 18" x 74".600 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish

Increase the storage capacity in your closet or supply room with this shelving add-on kit. The shelves have a weight capacity up to 600-pounds, which makes them ideal for heavy tools, and the open design provides adequate ventilation. This Quantum Storage Systems wire shelving unit has a chrome finish for a professional appearance..These extra shelves provide expansion of storage capacity on a corresponding shelving unit and come complete with four shelves, two posts, and eight S-hooks.Chrome-finished wire construction provides adequate air flow and high visibility of stored goods from every side.Four non-adjustable shelves.Has a weight capacity of 600 lbs. per shelf evenly distributed.Overall dimensions: 74"H x 72"D x 18"W; each shelf dimensions: 18"W x 72"D.Units can be combined at a right angle, straight line, and back-to-back configuration.Allows for the use of optional accessories including dividers, ledges, and inlay mats.Create additional storage to your existing wire shelving with this Quantum Storage Systems wire shelving add-on kit.

Tennsco Add-on Unit for snap-together open shelving has evenly distributed 200 lbs to 300 lbs per shelf holding capacity. Shelf unit with 12" deep shelves includes shelves, shelf supports along with 5-file dividers per shelf..Dimensions: 76"H x 48"W x 12"D.Ready To Assemble (Units snap together without tools or fasteners).T shaped upright attaches to Starter set to join units.Starter unit required to use this item.Weight: 140 lbs.Mfr. limited lifetime warranty.Closed add-on unit—T shaped upright attaches to starter set shelving unit (item# 127648PCSD) to join units together.Includes adjustable 12" deep shelves, shelf supports and five file dividers per shelf.200- to 300-lb. load capacity per shelf (with weight evenly distributed).All shelves are adjustable.Shpg. wt. 130lbs..Heavy-duty rolled-steel construction with sand finish.Unit includes 6 shelves.Uses half the floor space of conventional files.200- to 300-lb capacity per shelf.Starter set provides a single freestanding unit.Add-on units form a complete wall system.Units snap together without tools and fasteners.Order one starter set and any number of matching-height add-on units.Two "L" uprights form the same frame.Tennsco Add-on Unit for snap-together open shelving with 6 shelves measures 76" x 48" x 12".

The WR74-1872C Chrome Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit. Suitable for use in dry areas..Adjustable Open Wire Shelving - Starter Units.72" x 18" x 74".600 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish

Customize a heavy-duty storage system with this four-tier wire shelving add-on kit. Two posts and eight S-hooks support the four shelves to be attached to a standalone wire shelving unit, and you can set it up for right angle, parallel and adjacent arrangements to fit different spaces. Each shelf of this fully-welded Quantum Storage Systems wire shelving extension kit has a 600-pound capacity to support heavy supplies, tools, or merchandise stocks..Add-on kit adds storage space and total capacity for your shelf rack.All-welded construction and extra wire trussing increase shelf strength and come in chrome.Four non-adjustable shelves.Holds up to 600 lbs. per shelf.Dimensions: 74"H x 72"W x 24"D.Assembly required.Meets or exceeds NSF standard.Consists of two posts, four shelves, and eight S-hooks.10-year manufacturer limited warranty.Configure a sturdy, flexible storage system for business or household applications with this Quantum Storage Systems four-tier wire shelving add-on kit.

Whitmor 4-Tier closet organizer shelve in silver color is perfect for storage in the closet, basement, laundry room and more. 54" x 31 1/2" x 19 1/2" Shelves features durable resin and end connectors for easy connections..Silver coated metal frame with heavy duty resin end connectors.Extra strong wire shelves which make assembly quick and easy.Dimensions: 54"(H) x 31 1/2"(W) x 19 1/2"(L).4-tier closet organizer shelves.Uses: Multipurpose.Features: Sturdy, breathable.Shape: Rectangle.Placement: Floor.Perfect for anywhere in home.Whitmor 4-Tier closet organizer shelve in silver color is perfect for organization of shoes and other accessories.

Stack,connect, and create your own shelf with this space-saving unit. Attach horizontally with shelves of same-height, or vertically with same-width shelves for a custom storage solution. Wall-attachment hardware included. Weight Tolerance: 35.27 lbs per shelf, 105.8 lbs total. Assembly and Wall mount hardware included (screwdriver required). Compliant with CARB Regulation 93120 - Phase 2.Stack 2 units vertically or attach horizontally to fit your space just right.Use in living room to store books or display décor.2 shelves are adjustable height to mazimize space.Easy to Assemble; parts included (screwdriver required). Compliant with CARB Regulation 93120 – Phase 2.Assembled Dimensions: 13.78 in W x 11.4 2in D x 34.65 in H

Stack,connect, and create your own shelf with this space-saving unit. Attach horizontally with shelves of same-height, or vertically with same-width shelves for a custom storage solution. Wall-attachment hardware included.Weight Tolerance: 30.86 lbs per shelf, 92.6 lbs total. Assembly and Wall mount hardware included (screwdriver required). Compliant with CARB Regulation 93120 - Phase 2.Stack 2 units vertically or attach horizontally to fit your space just right.Store kitchen utensils, bathroom toiletries, or closet accessories.2 shelves are adjustable height to mazimize space.Easy to Assemble; parts included (screwdriver required). Compliant with CARB Regulation 93120 – Phase 2.Assembled Dimensions: 11.81 in W x 11.4 2in D x 34.65 in H