Data Patch Cables
149 results
Category 5e patch cable.10 ft.1 x RJ-45 Male Network.1 x RJ-45 Male Network.Black
With a polyvinyl chloride jacket, the StarTech N6PATCH15WH 3' white snagless Cat 6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity. It patches from hub to distribution panel and is great for use with Gigabit networks. This 4-pair UTP cable connects workstation to wall outlet..Category 6 patch cable connects workstation to wall outlet.Convenient length of 3' extend the reach of network devices.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.EIA/TIA-568A, TIA/EIA-568-B.1-2001 T568B, CMG rated, UL listed, ETL verified and RoHS Green compliant.Comes in white color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to support a broad range of Ethernet applications such as Power over Ethernet.Molded strain relief prevents the bending of the cable at sharp angles at the RJ-45 connector to minimize the stress at the plug termination point.Carefully constructed and tested, to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty
With a polyvinyl chloride jacket, the StarTech C6PATCH100WH 8' white molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Category 6 patch cable connects workstation to wall outlet.Convenient length of 8'.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.Meets CSA TIA/EIA-568B standards and RoHS Green compliant.Comes in white color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to ensure high-performance capability for your demanding Ethernet applications, such as Power over Ethernet.Manufactured using high-quality copper conductors to provide highest value for your cable investment.Patches from hub to distribution panel.Carefully constructed and tested to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty
Patch cable..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.3' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.Safety Data Sheet
With a polyvinyl chloride jacket, the StarTech N6PATCH100GN 3' green snagless Cat 6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity. It patches from hub to distribution panel and is great for use with Gigabit networks. This 4-pair UTP cable connects workstation to wall outlet..Category 6 patch cable connects workstation to wall outlet.Convenient length of 3' extend the reach of network devices.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.EIA/TIA-568A, TIA/EIA-568-B.1-2001 T568B, CMG rated, UL listed, ETL verified and RoHS Green compliant.Comes in green color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to support a broad range of Ethernet applications such as Power over Ethernet.Molded strain relief prevents the bending of the cable at sharp angles at the RJ-45 connector to minimize the stress at the plug termination point.Carefully constructed and tested, to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty
This 5 ft Molded Cat 6 Patch Cable is ETL verified to meet or exceed all Category 6 performance standards and features a durable green jacket that simplifies departmental color coding while providing rugged flexibility for network connections..50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Certifications & Standards: ETL
StarTech .com® Cat 6a cable in blue color offers reliable signal routing in IT hardware of 10 gigabit Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 7' cable has eight 25 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Snagless molded design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Aluminum polyester foil shielding secures data signal passing through the cable from electro-magnetic radiation and radio frequency interference..Easy-to-install 7' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.High quality construction protect against electro-magnetic or radio frequency interference from nearby equipment with cables.Comes in blue color for a new look.Shielded Snag-less cable offers flexibility.Meets CMG flame retardant test to minimize fire hazards.4 Pair STP conductors for good conductivity.The 25 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.CAT6a rated cable provides performance of up to 10 Gb/s.Meets all requirements and standards of TIA/ETL-568-B2.10 Category 6, UL® 444 and ROHS 2002/95/EC.Includes 1 x 7' blue shielded snagless 10 Gigabit Cat 6a STP patch cable.Comes with lifetime warranty.Blue.StarTech .com® C6ASPAT7BL 7' Blue Cat 6a cable is useful for 10 gigabit Ethernet network connections. Snagless RJ45 male-to-male connectors offer reliable connection.
CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 100 Mbps.Gold-plated RJ-45 male network connectors on both sides for dependable network connectivity.7' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty
StarTech.com® UTP Cat 5e Patch cable in black color offers reliable signal routing in IT hardware of 350 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 50' cable has eight 24 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Molded design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Utp patch cable for use with fast ethernet networks with power over ethernet capability.Easy-to-install 50' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.Molded cable offers flexibility.Meets CMG flame retardant test to minimize fire hazards.4 Pair STP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.CAT5e rated cable provides performance of up to 350 MHz.Incorporated with colored hoods for departmental color coding.50-micron gold connectors for peak conductivity.Meets all requirements and standards of RoHS.Includes 1 x 50' grey molded Cat 5 patch cable.Designed for use with Fast Ethernet networks, patches from hub to distribution panel.Comes with limited lifetime warranty.StarTech.com® M45PATCH50BK 50' Black UTP Cat 5e patch cable is useful for Ethernet network application. Molded RJ45 connectors offers reliable connection.
With a polyvinyl chloride jacket, the StarTech N6PATCH75BL 75' blue snagless Cat 6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity. It patches from hub to distribution panel and is great for use with Gigabit networks. This 4-pair UTP cable connects workstation to wall outlet..Cable length: 75'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, ETL verified, TIA/EIA-568-B.1-2001 T568B certifications and standards.Color: Blue, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty
Startech® 35' Cat 6 Snagless RJ-45 Male/Male Patch Cables31.Cat6 utp patch cable offers reliable signal routing.Easy-to-install 35' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.StarTech.com® N6PATCH35BK 35' Black UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.
Tripp Lite 5-ft. Cat6 Gigabit Snagless Molded Patch Cable.Category 6 for Network Device.Patch Cable.5 ft.1 x RJ-45 Male Network.Purple
The C2G ® 3' red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty
The Tripp Lite 7' blue Cat5e snagless molded patch cable comes rated for 350 MHz/1 Gbps communications. It has one RJ-45 male connector on both ends for reliable connectivity. The PVC four-pair stranded UTP reduces cross talk and attenuation. It features molded connectors with integral strain relief to withstand daily wear and tear. The premium snagless-type moldings protect the connection to offer long-period optimal performance. It is suitable for 1000Base-T, 10/100Base-T, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications..Type: Patch cable - CAT 5e.Technology: UTP.Wires per Cable: 8 wires.Features: Molded, stranded, snagless.Length: 7 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: Blue.Package Type: Retail.Manufacturer Warranty: Limited lifetime warranty
The Tripp Lite 7' blue Cat5e snagless molded patch cable comes rated for 350 MHz/1 Gbps communications. It has one RJ-45 male connector on both ends for reliable connectivity. The PVC four-pair stranded UTP reduces cross talk and attenuation. It features molded connectors with integral strain relief to withstand daily wear and tear. The premium snagless-type moldings protect the connection to offer long-period optimal performance. It is suitable for 1000Base-T, 10/100Base-T, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications..Type: Patch cable - CAT 5e.Technology: UTP.Wires per Cable: 8 wires.Features: Molded, stranded, snagless.Length: 7 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: Blue.Package Type: Retail.Manufacturer Warranty: Limited lifetime warranty.The Tripp Lite TRPN001007BL 7' CAT-5e Snagless Molded Patch Cable, Blue, is apt for 1000 Mbps networks and facilitates error-free data transfer.
Belkin® 14' RJ45 Cat-5E patch cables connect all the hardware destinations in a Local Area Network (LAN). Premium snagless-type models feature moldings to protect the connection. They're ideal for 10/100/1000 BaseT networks, and exceed the performance req uirement of Category 5e..14' long.Black.1 each.Exceeds the performance requirement of Category 5e. Molded.Available in 7', 14', 25' & 50' sizes.Premium snagless-type moldings to protect the connection.Belkin lifetime warranty.50-micron gold-plated connectors insure a clean and clear transmission.PowerSum tested.Black color.Manufacturer's lifetime guarantee.Belkin™ 14' CAT5e Snagless molded patch cable in black color has RJ-45 Male terminal connector and is compatible with 10/100 Base-T network.
The 4XEM™ 4XC6PATCH1GR 1' UTP network patch cable in gray, has one RJ-45 male connector on both the ends for reliable connectivity. The 4-pair 24 AWG stranded copper conductors ensure optimal signal conductivity. It features PVC jacket to withstand harsh environmental conditions. This cable feature molded connectors with integral strain relief..Cat6 UTP network patch cable for constructing Gigabit Ethernet networks.Cable length: 1'.Color: Gray, Material: PVC.Connectors: One RJ-45 male on both the ends.Conductor: 4 pair 24 AWG stranded copper.Tested to 350 MHz/1 Gb/s.Molded, stranded, snagless.Feature molded connectors with integral strain relief.CMG rated (general purpose).Meets ETL (category 6 draft 11), ANSI/TIA/EIA-568-B.1-2001, T568B certifications and standards.Comes with lifetime limited warranty
Make Power-over-Ethernet-capable Gigabit network connections - 10ft Cat 6 Patch Cable - 10 ft Cat6 Patch Cable - 10 feet Cat 6 Patch Cord - 3m Snagless Patch Cord - Black.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Backed by StarTech .com lifetime warranty.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Two serial devices with DB9M connectors requiring a null modem (cross wired) configuration.Warranty: Lifetime limited.Tripp Lite 6' Null modem cable connects two PC serial ports with Serial270 DB9 cable allowing data transmission with out any conflicts and features foil-shielding to ensure EMI/RFI protection.
Make Power-over-Ethernet-capable Gigabit network connections - 50ft Cat6 Cable / 50' Ethernet Patch Cable / 50 ft Gigabit Cat6 Cable - Yellow Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 50 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty
Belkin 20' CAT6 Snagless High Performance UTP Patch Cable, Red.Works with 100Base-T and gigabit Ethernet networks.Ensures clean, clear transmissions with 50-micron gold-plated connectors.Improves the return loss in your current network by 40 percent.Includes a Belkin Lifetime Warranty
Ensure a reliable Ethernet network connection between your system and router using the Tripp Lite N201-007-BK CAT-6 Cable. Both ends of this networking cable are fitted with RJ-45 male connectors for smooth transfer of signals. Its PVC jacket properly insulates the copper conductor and is flexible, reducing the possibility of cable damage..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.7' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.The Tripp Lite N201-007-BK 7' CAT-6 Patch Cable, Black, supports 10 Gigabit Ethernet networks to provide uninterrupted data transfer.
Belkin CAT5e RJ45 Patch cable in white color is 14' long and has 50 micron gold plated connectors to ensure perfect transmission. Cable offer reliable connection from IT hardware to network and ideal for use with 10 or 100 base-T networks..14'L cable.White.1 per pack.The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.Weight: 0.36 lb.Connector on second end: 1 x RJ-45 - Male - IEEE 802.3 - network.Connector on first end: 1 x RJ-45 - Male - IEEE 802.3 - network.Cable details: Patch cable.Cable type: Category 5e.Standard warranty: Lifetime.The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.
The Tripp Lite 1 m aqua duplex multimode 50/125 OM4 LSZH fiber patch cable is ideal for fiber channel SAN applications. It offers 40/100 Gigabit Ethernet speeds up to 300 m. It has sturdy dual LC male connectors at both ends to ensure fast, clear signal transmission with less insertion loss. It has a low-smoke, zero-halogen jacket for durability. This versatile cable is backward compatible with existing 50/125 fibers. It is suitable for LANs, SANs and high-speed parallel interconnects. It meets current IEEE 802.3ae and TIA LOMMF standards..Type: Patch cable - OM4.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Laser-optimized multimode fiber (LOMMF).Length: 3.3 ft.Core / Cladding Diameter: 50 / 125 micron.Connectors: 2 x LC multi-mode - male.Connectors (Other Side): 2 x LC multi-mode - male.Color: Aqua.Manufacturer Warranty: Limited lifetime warranty.Comes with lifetime limited warranty.40/100 Gb/s Ethernet speed up to 300 m (at 850 nm) for communication.Has nearly three times the bandwidth of conventional 62.5 um multimode fiber.Commonly used with VCSEL and LED laser light sources
Staples Brand.50 ft.Black.Patch Cable
Staples Brand.14 ft.Blue.Patch Cable
The StarTech M45PATCH100B Cat 5e molded patch cable in blue, is 100' long and has PVC jacket for insulation. The cable has RJ-45 male connectors at both the ends for optimal conductivity while reducing corrosion due to signal loss. This cable includes high quality 24 AWG copper wire and features durable construction. Cable rated at 350 MHz is suitable for use with fast Ethernet networks. The cable patches from hub to distribution panel and connects workstation to wall outlet..Patch cable is compatible with Fast Ethernet networks, connects workstation to wall outlet and patches from hub to distribution panel.Dimensions: 100'L.Comes in blue color and features polyvinyl chloride jacket with 24 AWG copper conductor for optimum insulation.Has one RJ-45 male connector at both ends.Cable rating: Cat 5e - 350 MHz.Molded cable provides excellent protection.Number of conductors: 4 pair UTP.Fire rating: CMG rated (general purpose).Colored hoods give departmental color-coding.Constructed with top quality components for durability.50-micron gold connectors deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion.Carefully constructed and tested, to retain Near End Crosstalk (NEXT) well within acceptable limits.Molded strain relief prevents the cable from being bent at sharp angles and minimizes the stress at the plug termination point.Meets RoHS, FCC, ETL, Green, TIA/EIA-568-B.1-2001 T568B certifications and standards.Weight: 2.2 lbs..Comes with lifetime warranty
Active converter cable saves upgrade cost by connecting your DVI computer to a VGA monitor or projector. For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL)..Snagless design protects clips when plugging and unplugging.Standard RJ45 connectors and unshielded twisted pair wires.Color: Black.PoE (Power Over Ethernet).Warranty Type: Lifetime.Cable Length: 3 ft.Wire Gauge: 24 AWG.RJ-45 Male to RJ-45 Male
The C2G ® 25' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 25'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.71 lbs..Comes with lifetime warranty.The Tripp Lite N002-030-BL 30' CAT-5e RJ-45 Molded Patch Cable, Blue, is apt for 1000 Mbps networks and facilitates error-free data transfer.
With a polyvinyl chloride jacket, the StarTech C6PATCH100WH 100' white molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Cable length: 100'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, ETL, TIA/EIA-568-B.1-2001 T568B certifications and standards.Color: White, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.Has colored hoods for departmental color coding
StarTech 45PATCH15WH Cat5e Patch Cable with Snagless RJ45 Connectors, 15ft, White.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat5e cable runs.Backed by StarTech.com lifetime warranty.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components
The Comprehensive® CAT6-7GRY-25VP 7' Cat6 snagless patch cable in gray, saves your time and money while adding convenience. This cable provides up to 550 MHz bandwidth for a high-speed signal transmission. The snagless cable has a molded low profile, snagless boot that makes installing the cable quick and easy every time while providing superior strain relief. This cable is perfect for distributing data, voice and video on today's high-speed Ethernet and Gigabit networks..Snagless patch cable is ideal for 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps token ring (IEEE 802.5), 100 VG-AnyLAN applications.Dimensions: 7' cable length.Gray PVC jacket.Packaging: 25/pack.Conductor: 24 AWG 4 twisted pairs stranded bare copper.Connections: 1 x RJ-45 male on both ends.Contact material: Copper alloy plated with 50u gold.DC resistance: 9.8 Ohm/100 m.Snagless boot for easy installation.Bandwidth: 550 MHz.Meets RoHS, UL standards.Weight: 5 lbs..Comes with lifetime warranty
CAT-5e for seamless connection over a network.Designed to transmit data at 100 Mbps.Gold-plated RJ-45 male network connectors on both sides for dependable network connectivity.75' CAT-5e for easy tethering.Comes with a lifetime limited warranty
StarTech N6PATCH10BL Cat6 Patch Cable with Snagless RJ45 Connectors, 10ft, Blue.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty
With a polyvinyl chloride jacket, the StarTech C6PATCH12GN 6' green molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Category 6 patch cable connects workstation to wall outlet.Convenient length of 6'.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.Meets CSA TIA/EIA-568B standards and RoHS Green compliant.Comes in green color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to ensure high-performance capability for your demanding Ethernet applications, such as Power over Ethernet.Manufactured using high-quality copper conductors to provide highest value for your cable investment.Patches from hub to distribution panel.Carefully constructed and tested to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty
Introducing the StarTech Cat6a 6ft Ethernet Cable, the perfect solution for your high-speed networking needs. This cable is designed to deliver reliable and efficient connections for your 10GBASE-T networks, ensuring seamless data transfer and power delivery for your devices. Crafted with precision, the cable features 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, providing both durability and safety. The snagless design and gold-plated RJ45 connectors ensure a secure fit and minimize wear over time, making it ideal for various installation environments, from home offices to industrial settings. Whether you're connecting to switches, NAS devices, or PoE++ devices, this cable supports data transfer rates up to 10 Gbps, ensuring high-speed performance for demanding applications. Its backward compatibility with Cat 6 and Cat 5/5e standards ensures easy integration into existing network setups. Fluke Tested and ETL Verified, the StarTech Cat6a Ethernet Cable meets stringent performance standards, giving you peace of mind and assurance of quality. Upgrade your network with this reliable and versatile cable, and experience the difference in speed, reliability, and safety. Choose the StarTech Cat6a 6ft Ethernet Cable for your networking needs and enjoy a seamless and efficient connection every time..Ideal for networking applications, this cable is perfect for connecting switches, NAS devices, and PoE++ devices, ensuring reliable data transfer and power delivery..The cable measures 6 feet in length, providing a convenient reach for various installation environments, from home offices to industrial settings..Equipped with RJ45 connectors on both ends, this cable features 8-pin connections that ensure a secure and stable link between devices..Made with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, this cable is both durable and safe. The true color is purple..RJ45 Male Connector on End 1, RJ45 Male Connector on End 2.Supports data transfer rates up to 10 Gbps, ensuring high-speed and reliable network performance for demanding applications..Compatible with Cat 6, Cat 6a, and Cat 5/5e standards, making it easy to integrate into existing network setups..Fluke Tested and ETL Verified, this cable meets ANSI/TIA-568.2-D standards, ensuring top-notch performance and reliability..Comes with a Limited Lifetime Warranty, providing peace of mind and assurance of quality.
StarTech.com's 50ft Blue Cat6 UTP Snagless Patch Cable is constructed of top quality materials (100% Copper conductors, 23 Gauge Wire, 50 micron Gold Connectors) to ensure optimum performance and durability and is backed by our Lifetime Warranty..RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty.Constructed with top quality components
The C2G 31341 5' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty
The C2G® 7' male to male category 6 yellow snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in yellow color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.22 lbs..Comes with lifetime warranty
The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty
The 4XEM™ 75' gray RJ-45 Cat5e molded UTP patch cable is perfect for high performance networking applications. It has one RJ-45 male connector on both ends for connectivity. The snagless design safeguards the locking tabs on the RJ45 connectors from damage during installation. It has molded-strain relief construction for longer life and features copper conductor for high electrical conductivity. This molded PVC cable supports 350 MHz/1 Gbps data communication..Cat5e molded UTP patch cable for network device and notebook.Cable length: 75'.Connections: One RJ-45 male connector on both ends.CMG rated PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.Meets IEEE 802.3ab, IEEE 802.5 and TIA/EIA-568-B.1-2001 T568B certification or standards.Comes in gray color.Features molded connectors with integral strain relief for added durability.Bandwidth: Rated for 350 MHz/1 Gbps communication.Snagless design aids to protect the locking tabs on the RJ45 connectors from damage or snap-off while installing.Comes with limited lifetime warranty
CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.50' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty
The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty
The C2G ® 14' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 14'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.4 lbs..Comes with lifetime warranty
StarTech® 5 ft Cat5e Gray Molded RJ45 UTP Cat 5e Patch Cable - 5ft Patch Cord.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Category 5e.5 ft.1 x RJ-45 Male
The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty
StarTech 45PATCH15YL Cat5e Patch Cable with Snagless RJ45 Connectors, 15ft, Yellow.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat5e cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty
10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty
The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty