Desks Made From Recycled Materials
83 results
Transform classrooms into active and collaborative spaces with the new patent-pending Kore Design Kids Sit-Stand Mobile Desk. Flexible classroom layouts, easy to move and reformat configuration as needed..Table top is manufactured with FDA approved Antimicrobial Protection that offers proven barrier protection for the desk against bacteria such as E. coli, mold and VIRUSES like H1N1 flu..Durable and Stable: Desktop is made from sturdy recyclable plastic and the piston and frame are made of steel for long-lasting stability..Folding table-top for multiple uses. Table angles of 45-90 degrees for various tasks, and folds down flat. Takes up less space than traditional desks and stacks neatly for storage or easier cleaning..Adjustable Height from 31 to 38": Easy access lever to raise and lower desk height. Sit or stand as needed..Anti-Roll, Anti-Tip Safety: Non-slip locking casters prevent rolling or tip-overs..Designed for Utility: Backpack hook, cup holder, and pencil tray for a no-mess experience..Work surface area is 31.5" x 21.5". Maximum load weight is 100 lb..Table tilts from 0° to 90° – adjust angle to suit task, or fold down to stack and store workstation away..10-Year Warranty: Satisfaction guaranteed with a 10-Year Warranty on Kore Design desks.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Modular double pedestal desk. Includes a core removable lock and Central locking system. Box and file drawers feature full extension slides and premium satin nickel Arch pull handles. Precision ball-bearing suspension. Durable laminate work surface with grommet holes for cord management. Radiuses profile edge banding for enhanced comfort. Full height end panels with leveling glides. One pencil tray standard per desk and one drawer divider standard per box drawer. Meets or exceeds ANSI-BIFMA standards and contains up to 28 percent recycled material. This desk is a part of our Executive Modular Desk Collection..Rectangular double-pedestal computer desk fits any workspace.Modern-style desk made of durable laminate in black with the work surface in a walnut finish.Dimensions: 29.5"H x 60"W x 30"D.Keep important papers and personal belongings secure with two box drawers and two file drawers.Box and file drawers feature full-extension slides and premium satin nickel arch pull handles.Desktop includes two grommet holes for cord management.No assembly required.Meets or exceeds the GREENGUARD Gold, TAA, CARB/TSCA, and ANSI/BIFMA standards.One pencil tray per desk and one drawer divider per box drawer.Features full-height end panels with leveling glides and radiuses, plus profile edge banding for enhanced comfort.Includes two locks with removable cores and central locking system.1.13" thick durable laminate work surface is easy to clean and disinfect.Contains up to 30% recycled material.12-year manufacturer limited warranty.The ultimate solution for Industrial, Office, School, or Small Office Settings! Featuring a durable wood top and convenient filing storage, this desk offers both style and functionality. Easy assembly and long-lasting durability make It ideal for busy environments. Locking mechanisms you can trust for the security of your valuable items.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Modular single pedestal desk. Includes a core removable lock. Box and file drawers feature full extension slides and premium satin nickel Arch pull handles. Precision ball-bearing suspension. Durable laminate work surface with grommet holes for cord management. Radiuses profile edge banding for enhanced comfort. Full height end panels with leveling glides. One pencil tray standard per desk and one drawer divider standard per box drawer. Meets or exceeds ANSI-BIFMA standards and contains up to 28 percent recycled material. This desk is a part of our Executive Modular Desk Collection..Rectangular single-pedestal computer desk fits any workspace.Modern-style desk made of durable laminate in black with the work surface in a walnut finish.Dimensions: 29.5"H x 48"W x 30"D.Keep important papers and personal belongings secure with one box and one file drawers.Box and file drawers feature full-extension slides and premium satin nickel arch pull handles.Desktop includes grommet holes in the top for cord management.No assembly required.Meets or exceeds the GREENGUARD Gold, TAA, CARB/TSCA, and ANSI/BIFMA standards.One pencil tray per desk and one drawer divider per box drawer.Features full-height end panels with leveling glides and radiuses, plus profile edge banding for enhanced comfort.Includes a lock with removable core.1.13" thick durable laminate work surface is easy to clean and disinfect.Contains up to 30% recycled material.12-year manufacturer limited warranty.The ultimate solution for Industrial, Office, School, or Small Office Settings! Featuring a durable wood top and convenient filing storage, this desk offers both style and functionality. Easy assembly and long-lasting durability make It ideal for busy environments. Locking mechanisms you can trust for the security of your valuable items.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degree.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Enhance your workspace with the ergonomic VersaDesk PowerPro Corner, designed to make your workday more comfortable and productive. Built from durable 14-gauge steel with a tough, scratch-resistant finish, this electric standing desk converter is both stable and easy to use. This sit stand desk riser features a split-level keyboard tray and a USB charging port, supports up to 80 pounds, and adjusts smoothly for users from 4'5" to 6'5" tall. Made in our Los Angeles factory and ready to use with no assembly required, our standing desk alternative is crafted from 60% recycled materials and comes with a lifetime warranty. PowerPro sit to stand desk converter is ideal for dual or triple monitor setups or VESA mounts (not included)..ELECTRIC, FAST AND QUIET HEIGHT ADJUSTMENT with effortless push-button height control and largest height range - 20 inches.STURDY AND DURABLE: Steel base, frame, and engineered laminate surface with three pre-drilled grommet holes for mounting monitors and cable management.USB CHARGING PORT & KEYBOARD TRAY are additional features that make the sit-stand desk more comfortable and functional.DIMENSIONS: Overall - 36” Width x 31” Depth. Surface area - 36” Width x 23.5” Depth.HEAVY DUTY: industry-leading capacity, that can accommodate up to three monitors and lifts up to 80 lbs.CERTIFIED QUALITY: BIFMA and UL certified for safety and durability.READY TO USE: The stand desk converter requires minimal assembly; simply attach or detach the keyboard tray in less than 5 minutes.PROUDLY MADE IN AMERICA: Our innovative and patented desktop riser design has a limited lifetime warranty (Utility Patent# US10413055B2, Design Patent# USD845678S).IDEAL FOR ALL DESK TYPES, including L-shaped desk and corner desk.VersaDesk corner standing desk converter transforms L-shaped, corner, or standard desks into a dynamic sit-stand workspace with just the push of a button