Durable Gear Cases
3 results
The Gray Eylar SA00002 Large Waterproof and Shockproof Gear Hard Case with Foam Insert gives extra protection to your contents with 1 customizable pull-and-pluck cubed foam layer, 2 solid foam layers, and 1 layer of egg-crate foam padding. It also makes for safer traveling with its pressure equalizing knob. The hard case comes in a convenient size, making it easy to store inside a backpack or luggage and makes it ideal for storing cameras, electronics, and more. The outer dimensions are 19.78 in. x 15.77 in. x 7.41 in. while the inner storage area is 18.06 in. x 12.89 in. x 6.72 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear; provides waterproof protection for up to 3.2 ft. (1 m) of being fully submerged thanks to its rubber gasket lining.Ideal for standard DSLR camera, lenses, and accessories.2 customizable pull-and-pluck cubed foam layers, 1 egg crate foam layer, and 1 solid foam layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.Stackable design.External dimensions: 19.78 in. x 15.77 in. x 7.41 in..Internal dimensions: 18.06 in. x 12.89 in. x 6.72 in..Limited lifetime warranty.Gray.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Yellow Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Yellow.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Green Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
You May Also Like
The Green Eylar SA00010 Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is designed to secure your gear for transport or storage. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00010 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 1 fully customizable pull-and-pluck cubed foam layer, 1 solid layer pad, and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 11.65 in. x 8.35 in. x 3.78 in. while the inner storage area is 10.54 in. x 6.04 in. x 3.16 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, mobile devices, gear, and lenses.1 customizable pull-and-pluck layer, 1 solid layer pad, and 1 egg-crate top pad layer.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable fittings.External dimensions: 11.65 in. x 8.35 in. x 3.78 in..Internal dimensions: 10.54 in. x 6.04 in. x 3.16 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00022 Small Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is ideal for storing cameras, electronics, tools, and more. The pluck-and-pull foam along with its sturdy design will safely store sensitive items during travel or on the go. This case is IP67 waterproof, dustproof, and shockproof. The hard case includes 3 layers of foam—1 egg-crate top liner layer, 1 pull-and-pluck customizable layer, and 1 solid bottom pad layer. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. A rubber gasket lines the rim of the case, so when it’s latched closed it creates a waterproof seal. 2 padlock hasps allow this case to be secured with padlocks and meet TSA requirements for transport. The outer dimensions are 10.62 in. x 9.68 in. x 4.87 in. while the inner storage area is 9.25 in. x 7.12 in. x 4.12 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines case’s rim to create a waterproof seal when latched closed.Ideal for cameras, lenses, mobile devices, and small gear.1 customizable pull-and-pluck layer, 1 egg-crate top pad layer, and 1 solid bottom layer pad.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.2 padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.External dimensions: 10.62 in. x 9.68 in. x 4.87 in..Internal dimensions: 9.25 in. x 7.12 in. x 4.12 in..Limited lifetime warranty.Black.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00006 XL Waterproof and Shockproof Transport Roller Hard Case with Foam Insert is designed to secure your gear for transport or storage. Roller wheels and an extendable handle let you move this rugged equipment case with ease. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The SA00006 hard equipment roller case comes with 4 layers of foam designed to keep your valuables firmly in place — 1 customizable pull-and-pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad, and 1 top egg-create layer. 2 press-and-pull snap latches secure the full length of the case..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.Meets TSA requirements with lockable hasps and fittings.Outer dimensions: 23.75 in. x 20 in. x 11.75 in..Inner storage area: 22.25 in. x 17.25 in. x 10.12 in. (lid included).⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Eylar SA00007 XXL Waterproof and Shockproof Gear Hard Transport Roller Case with Foam Insert combines heavy-duty protection with the ease of transportation. A tough outer shell allows for shock resistance while a strong seal creates water protection. Inside, there is compartmentalized foam to keep belongings safe and organized. A lockable handle pulls out to carry the box with sturdy wheels. Its air pressure equalizer knob lets you compensate for altitude while traveling. 4 layers of foam keep your valuables securely in place. This protective trolley case is ideal for traveling with heavy and sensitive items such as cameras, laptops, electronics, tools, accessories, and equipment. Clamps on top shut the box while its grooves make it easy to stack. External dimensions are 31.1 in. x 23.42 in. x 14.37 in. while internal dimensions are 28.34 in. x 20.47 in. x 11.02 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, laptops, electronics, tools, and equipment with space for power cables and accessories.4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.External dimensions: 31.1 in. x 23.42 in. x 14.37 in..Internal dimensions: 28.34 in. x 20.47 in. x 11.02 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00034 22-In. Carry-on Travel Roller Waterproof Equipment Hard Case with Foam Insert is designed to secure your equipment for transport or storage. It is sized to fit in standard overhead storage compartments for air travel. It meets TSA’s strict requirements for transport on airplanes in the USA. This case is IP67 waterproof, dustproof, and shockproof and a rubber gasket lines the rim of the case, so when it’s latched closed, it creates a waterproof seal. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The hard case includes 4 layers of foam—1 egg-crate top liner layer, 2 pull-and-pluck customizable layers, and 1 solid bottom pad layer. Press-and-pull snap latches secure the full length of the hard case and 2 padlock-adaptable fittings allow for secure storage at home or on the go. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. The outer dimensions are 22 in. x 13.81 in. x 9 in. while the inner storage area is 19.75 in. x 11 in. x 7.6 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines rim of case, to create waterproof seal when latched closed.Ideal for cameras, lenses, electronics, and tools; designed to fit standard overhead airline compartments in the USA; TSA-friendly.4 layers of foam protect your gear-1 top egg-crate foam, 2 customizable pluck-and-pull foam layers, and 1 solid bottom layer of foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.2 padlock-adaptable hasps.Roller wheels and extendable handle for easy transport.External dimensions: 22 in. x 13.81 in. x 9 in..Internal dimensions: 19.75 in. x 11 in. x 7.6 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Built to endure. Designed to grip. Tough on the outside, smart on the inside—meet the Samsung Rugged Case for Galaxy S25. Engineered to absorb impacts and tested to survive 1.2-meter drops on steel, this case protects your device with style and purpose. Raised edges defend your screen, while grooved textures enhance grip. Modern, lightweight, and sleek—this is everyday armor for your Galaxy S25..Built exclusively for the Samsung Galaxy S25 and offers a tough exterior with ergonomic handling for those who need heavy-duty protection..Constructed from shock-absorbing polycarbonate and TPU, the sleek black finish adds a refined look to a highly durable case..Raised edges help shield your screen from direct impact when dropped or placed face-down on surfaces..The grooved texture design provides enhanced grip, helping prevent slips and improving handling in all conditions..Built to absorb shocks and resist falls up to 1.2 meters on hard surfaces, this case delivers serious protection..Supports wireless charging, so you can charge your Galaxy S25 without removing the case..Packaged as a single unit, ideal for individual sale or personal use..Covered by a 1-year limited manufacturer warranty for trusted quality and protection.
Choose a color. Make a statement. Choose your favorite shade from a colorful selection of Galaxy S24 Ultra Silicone Cases. Whether you want to make a bold statement or keep it stylishly subtle, find the perfect hue that's right for you. Smooth and stylish Give your phone a touch of style with the Galaxy S24 Ultra Silicone Case. Enjoy a comfortable grip that's soft to the touch, all while helping your phone stay protected..Basic Phone Case for Galaxy S24 Ultra..Made of durable silicone material and comes in Dark Violet Color..Shock absorbing and scratch resistant, offering protection from impacts and drops..Wireless charging compatible for effortless use without removing the case..Typically sold as 1 unit per package..Backed by a 2-year limited warranty.
Galaxy S25 Ultra Rugged Case has proven its ability to withstand falls from as high as 1.2 m onto rough surfaces like steel. It's raised edges and impact resistance give you the confidence you need to face any adventure head on..Rugged Case designed for the Samsung Galaxy S25 Ultra..Made from polycarbonate material and comes in a black color..Features shock absorbing capabilities and scratch resistance..Comes with a 1 year limited warranty.
Keep your device protected with the Samsung Galaxy S25+ Rugged Case in black. Built for durability, this shock-absorbing case shields against drops and impacts, while its sleek design and raised edges provide extra protection for the screen and camera, making it a perfect blend of functionality and style..Rugged phone case designed for the Galaxy S25+..Made from durable polycarbonate and TPU, this case comes in a true black color..Features shock-absorbing capabilities for drop protection and is scratch-resistant to keep your device free from everyday scratches and scuffs..Compatible with wireless charging, allowing you to charge your phone without removing the case..Sold individually, with a unit of measurement of one each.
The i-Blason Armorbox protective phone case with full-body design protects your Samsung Galaxy S24 Ultra from bumps and drops. The case is MagSafe-compatible and stylus-friendly, magnets do not affect brush function..Rugged protective case for Samsung Galaxy S24 Ultra (2024).Case is MagSafe-compatible.Made of unbending polycarbonate and shock-absorbing TPU in dark green.Built-in metal camera cover doubles as multi-angle kickstand.Wireless charging compatible.Features a built-in screen protector.Raised edges keep the screen and lens off damaging surfaces.1-year manufacturer limited warranty
Crafted for those who demand both protection and performance, this precision-fit case includes a built-in stand for ergonomic use and a reinforced shell with honeycomb texture for extra durability. The sleek gray finish pairs perfectly with any workspace setup while keeping your MacBook safe from life's mishaps..Designed for MacBook Air 15" (2024) – Ensures a snug, secure fit with full access to ports and functions..Storm Gray finish with translucent textured backing – Offers a bold, modern look while showcasing the logo..Built-in adjustable stand – Elevates the laptop for better posture and airflow..Honeycomb-reinforced back panel – Adds strength and visual flair while diffusing impact..Triple-hardened TPU and polycarbonate build – Guards against drops, scratches, and wear..Shock-absorbing corners – Help minimize damage from accidental bumps and falls..Slim, form-fitting profile – Easy to slip into bags without bulk..SAHARA Limited Lifetime Replacement Warranty..Defend your device with rugged style using the SaharaCase Hard Shell Case with Stand for MacBook Air 15" (2024) in Storm Gray.
Galaxy S25 Kindsuit Case – Gray Modern Style. Everyday Protection. Give your Galaxy S25 the care it deserves—with a case that blends smart design and serious protection. The Kindsuit Case delivers a clean, minimalist aesthetic in a sophisticated gray finish, crafted for those who want more than just a cover. Why You'll Love It: Modern Design: Sleek, premium look that enhances your device's style. Soft Inner Lining: Gently cushions your phone to guard against scratches. Shock-Absorbing Build: Protects against bumps, drops, and daily wear. Wireless Charging Ready: No need to remove your case—just place and power up. Perfect Fit: Tailored exclusively for the Galaxy S25Wrap your phone in confidence and sophistication. The Galaxy S25 Kindsuit Case—where style meets durability..Designed as a stylish basic case, this slim-fit cover is exclusively compatible with the Samsung Galaxy S25, delivering reliable everyday protection without added bulk—perfect for users seeking both function and fashion..Not MagSafe certified, as it is designed specifically for Samsung devices and not equipped with Apple's magnetic alignment technology..Crafted from a combination of synthetic leather and plastic, the Kindsuit Case offers a sleek finish with a soft-touch interior. The True Color is a clean, professional Gray, perfectly suited for a modern aesthetic..Built to protect, the case offers shock-absorbing properties that help guard your phone from accidental drops and impacts. The scratch-resistant inner lining further preserves your device's original look over time..Wireless charging compatible, allowing you to charge your Galaxy S25 without removing the case—making it both stylish and convenient..Sold as a single unit (Each), this purchase includes one official Samsung Galaxy S25 Kindsuit Case in Gray..Comes with a 1-Year Manufacturer Warranty, ensuring peace of mind and product reliability directly from Samsung.
Keep your device safe and secure with the Samsung Galaxy Tab 10" Plastic Waterproof Carrying Case in sleek black. Designed for maximum durability, this case provides waterproof protection, shielding your tablet from spills, splashes, and unexpected weather conditions. Its sturdy plastic construction offers impact resistance, helping to guard against bumps and drops while maintaining a slim and lightweight profile. Perfect for travel, outdoor adventures, or everyday use, this reliable carrying case ensures your Samsung Galaxy Tab stays protected without sacrificing style. Whether commuting to work or using your device in demanding environments, this secure and practical case is built to handle it all..Samsung Galaxy Tab 10 inch Carrying Case.Plastic material in solid black.Dimensions: 6.9"H x 10.3"W x 1"D.Adjustable Laptop Bag Straps & Handle.Waterproof.Comes with 1 year warranty.Galaxy Tab Active4 Pro Smartcase's easy-carry shoulder strap and 360-degree rotatable hand grip keep you flexible in the field with one-handed usability.
Whether you’re walking the mean streets of the city or working on a photo shoot, this molded Hard Shell EVA DSLR Case is the ultimate companion. Boasting a lightweight design, this case conforms to your DLSR camera to provide ample protection without getting in your way. Rest assured that your DSLR is safe from scratches, dust, lens, LCD, and other bumps..Quick access hard shell camera case for DSLR cameras.Compatible with Nikon D3400, Nikon D3500, Sony a7 III, Canon EOS Rebel T5i, Canon EOS Rebel SL2, Canon EOS M50, and most other standard-sized SLR cameras.Color: Black, Material: EVA/Nylon exterior with egg crate foam interior.Exterior: 7" x 6.25" x 5", Interior: 6.5" x 5.75" x 4.5".Stylish and rugged design with hook and loop fastener to allow for quick access, can be worn on belt or carried by the rubber handle.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.govSafety Data Sheet
Galaxy S25 Ultra Kindsuit Case – Gray. Minimalist Style. Maximum Protection. Give your Galaxy S25 Ultra the case it deserves—sleek, smart, and made to match your lifestyle. The Kindsuit Case in Gray combines a soft inner lining with a durable outer shell, delivering effortless style and everyday drop defense. Modern & Minimalist Look – Elevates your phone's natural design. Shock-Absorbing Protection – Helps defend against bumps and drops. Scratch-Resistant Interior – Keeps your phone flawless on the inside. Wireless Charging Compatible – No need to remove your case to power up. Made for Galaxy S25 Ultra – A precision fit that feels just right. Protect your investment with a case that balances elegance and toughness—the Galaxy S25 Ultra Kindsuit Case in Gray..Precisely designed to fit the Samsung Galaxy S25 Ultra, offering a sleek, professional look while delivering everyday protection without unnecessary bulk..Crafted from synthetic leather and plastic, the case features a soft-touch interior and a clean, durable exterior. The True Color is a modern and neutral Gray, perfect for both casual and professional settings..Engineered with shock-absorbing technology to protect against drops and impacts. The interior is scratch-resistant, helping preserve the pristine condition of your Galaxy S25 Ultra over time..Wireless charging compatible, enabling convenient charging for your Galaxy S25 Ultra without needing to remove the case..Sold as a single unit (Each). This purchase includes one official Samsung Galaxy S25 Ultra Kindsuit Case in Gray..Comes with a 1-Year Manufacturer Warranty, ensuring coverage and peace of mind directly from Samsung.
The i-Blason Armorbox protective phone case with full-body design protects your Samsung Galaxy S24 Ultra from bumps and drops. The case is MagSafe-compatible and stylus-friendly, magnets do not affect brush function..Rugged protective case for Samsung Galaxy S24 Ultra (2024).Made of unbending polycarbonate and shock-absorbing TPU in black.Built-in metal camera cover doubles as multi-angle kickstand.Wireless charging compatible.Features a built-in screen protector.Raised edges keep the screen and lens off damaging surfaces.1-year manufacturer limited warranty