Electrical Test Kits

This auto ranging multimeter is capable of measuring AC/DC voltage and current, resistance, frequency, capacitance and temperature. Featuring double molded plastic housing, the R5008 includes diode check and continuity functions and ships complete with test leads and a thermocouple probe for contact temperature measurements..Measures AC/DC voltage and current, frequency, resistance, capacitance and temperature.Diode check and continuity functions.Relative and data hold functions.Double molded plastic housing.Cat. III 600V safety rating.5.9"H x 2.8"W x 1.9"D.AC voltage range of 400mV, 4, 40, 400, 600V.DC voltage range of 400mV, 4, 40, 400, 600V.AC voltage resolution of 0.1mV, 1, 10, 100V.DC voltage resolution of 0.1mV, 1, 10, 100V.AC/DC current range of 400, 4000 A, 40, 400mA, 10A.AC/DC current resolution of 0.1, 1 A, 10, 100mA, 1A.Resistance range of 400ohm, 4, 40, 400kohm, 4, 40Mohm.Resistance resolution of 0.01ohm, 1, 10, 100kohm, 1, 10Mohm.Includes a temperature input adapter, type K thermocouple wire probe, test leads, a battery and a carrying case.Compact auto ranging digital multimeter with 11 functions

This auto ranging multimeter is IP67 rated, has a 40,000 count display for precise readings and is capable of measuring AC/DC voltage and current, frequency, resistance, capacitance and temperature. This DMM also includes diode and continuity tests and features 4-20 mA loop measurement and a digital analog bargraph..True RMS AC/DC voltage and current measurements.Measures frequency, resistance, capacitance and temperature.Diode check and continuity functions.Backlit LCD readout with analog bar graph.4-20 mA process loop measurements with % readout.Data hold, Max/Min and Peak capture mode.IP67 dust and waterproof.Cat. IV 600V, Cat. III 1000V safety rating.7.4"H x 3.2"W x 2.0"D.AC range of 400mV, 4, 40, 400, 1000V.DC range of 400mV, 4, 40, 400, 1000V.AC accuracy of + or -(1.0% rdg. + 5 dgt.) at 400mV and + or -(1.0% rdg. + 3 dgt.) for other ranges.DC accuracy of + or -(0.1% rdg. + 5 dgt.) at 1000V and + or -(0.06% rdg. + 2 dgt.) for other ranges.AC resolution of 0.1mV, 0.001, 0.01, 1V.DC resolution of 0.01mV, 0.0001, 0.01, 0.1V.AC/DC current range of 400, 4000 A, 40, 400mA, 10A.AC current accuracy of + or -(1.5% rdg. + 3 dgt.).DC current accuracy of + or -(1.0% rdg. + 3 dgt.).Temperature range of -58 to 1832degree f (-50 to 1000degree C).True RMS multimeter with built-in non-contact voltage detector and 40,000 count backlit LCD display

Reed Instruments outlet tester quickly identifies faulty wiring. Plug the instrument into the receptacle under test and match the light pattern to the indicator chart to determine the fault. The R5210 features a built-in GFCI test to quickly verify GFCI outlets are functioning properly..Receptacle tester with a built-in GFCI trip test to quickly verify GFCI outlets are functioning properly.Dimensions: 3"H x 2"W x 1"D.Meets or exceeds CE and UL standards.Compact design.Detects common three-wire receptacle issues.LED indicators identify five wiring faults.Status indicator chart.Voltage range: 110-125VAC.Max current: 15A.1-year manufacturer limited warranty

This versatile Reed Instruments compact-sized multimeter measures AC/DC voltage and current, resistance, capacitance, frequency, diode, and continuity. It also features a built-in non-contact voltage detector to quickly detect live voltage on electrical circuits found in residential, commercial, and industrial buildings..Multimeter to measure AC/DC voltage and current, resistance, capacitance, frequency, diode, and continuity.Built-in non-contact voltage detector and double-molded plastic housing.4000-count backlit LCD display.Low battery indicator and auto shutoff.CAT III 600V safety rating

This infrared thermometer features a 12:1 distance to spot ratio and has been drop tested up to 6.5 feet. The R2310 has the ability to track maximum, minimum, average and differential readings and the ability to set high/low alarms and monitor continuously..Built-in laser pointer identifies target area.User selectable degrees Fahrenheit and Celsius.12:1 distance to spot size ratio.Digitally adjustable emissivity.Max, Min, Average and Differential readings.Backlit display.High and low alarms.Dustproof and drop tested.Trigger lock for continuous monitoring.Low battery indication and auto shut off.Temperature range of -31 to 1202 degrees Fahrenheit (-35 to 650 degrees Celsius).Accuracy of ≥32°F (0°C):±3.6°F (1.8°C) or ±1.8% rdg.,whichever is greater and <32°F (0°C:±3.6°F+0.1°F (1.8°C+0.1°C)/rdg..Resolution of 0.1°F (0.1°C).Spectral response of 8-14µm.Emissivity of 0.1 to 1.0 (Adjustable).Response time 250mS.Tripod Mountable.Maximum Operating Altitude of 6561' (2000m).Maximum Storage Altitude of 39370' (12000m).Powered by 1x 9V Battery.7.4''H x 4.7''W x 2.2"D.Weighs 10.3 oz. (292g).Includes Carrying Case and Battery.Rugged IP65 rated double-molded housing. Automatic emissivity adjustment allows for accurate application measurements.

Find studs, metal and detect the presence of AC voltage with this 3-in-1 multi-scanner. The R9090 features an LCD display with bargraph allowing for quick and accurate detection..3-in-1 stud, metal and AC voltage detector.Ergonomically designed for comfort and grip.Bargraph allows for quick and accurate detection.Easy operation.Auto power off.Includes battery

This compact light meter by Reed Instruments can be used either stand-alone or with the Reed Smart Series app (available for download on Android and iOS). When connected to the app, the light meter can be set up to log measurements over a given period..Real-time data logging light meter measures illuminance levels up to 100000 lux.Kit includes: light meter, four AAA batteries.Dimensions: 6.9"H x 1.5"W x 1"D.Weight: 3.4 oz..Can be used either stand-alone or with the Reed Smart Series app (available for download on Android and iOS).Provides wireless Bluetooth 5.0 connectivity with a range of up to 246'.Easy to operate, designed for one-hand operation.Integrated 1.3" EBTN LCD display provides flexibility for use without a mobile device.Magnetic backing allows the instrument to be mounted to metallic surfaces.Tripod mount makes possible long-term monitoring.Features a low battery indicator and auto shutoff.Batteries provide a life of up to 50 hours.Measuring range: 0-100000 lux (0-9290 FC).User-selectable sampling rate from 1 to 120 seconds.Easy setup with automatic app integration.Connect, measure, and log data from up to six instruments simultaneously.Export data via Excel or PDF, and create custom reports that can be emailed from a mobile device.Meets or exceeds the CE, UKCA, FCC, and IC ID standards.1-year manufacturer limited warranty.Safety Data Sheet

This LED Light Meter is capable of measuring popular light sources including white, red, green, yellow and blue LEDs up to 199,900 Lux (19,990 Fc). The R8140 includes an auto-ranging feature to optimize resolution and keeps track of minimum and maximum readings. This instrument is also capable of measuring standard incandescent light sources..Measures ambient light levels of white, red, yellow, green and blue LED light and visible light in Foot-candles or Lux.Large, backlit LCD display.Detachable and rotatable light sensor.Min/Max and data hold functions.Cosine and color corrected measurements.User adjustable parameter for specialized light sources.Low battery indicator and auto shut off.Light range of 0 to 199,900 LUX (0 to 19,990 ft-cd).Accuracy of Incandescent Light Source is ±(3% rdg.+ 5 dgt) (Otheer Visible Light Source: ±8% rdg..Resolution of 0.1 Lux (0.01 ft-cd).Response Time of 500mS.Silicon photodiode sensor with color correction filter and cosine correction.Light Types: White LED, Yellow LED, Green LED, Red LED, Blue LED, Warm White Fluorescent, Cold White Fluorescent Lamp, Incandescent.Automatic and Manual Autoranging.6-Digit LCD Display.Min/Max and Data Hold function.Overrange Indicator.Auto Shut-off after 30 minutes.Powered by 2x AA Batteries.6.7''H x 2.5''W x 1.5"D.Weighs 7.4 oz (210g).Includes the Detachable Sensor, Sensor Cover, Hard Carrying Case and 2x AA Batteries.Auto-ranging LED light meter with detachable and rotatable sensor that allows for one-handed operation.

This continuity tester is capable of checking circuits for continuity and identifying cables and wires up to 10,000 feet (3,000 meters) in length. Bright visual (bi-color LEDs) and loud audible (beeper) indicators allow wire ends to be tested in noisy environments. The R5300 is used by professional electricians, alarm/cable installers and in home audio installations..Local and remote continuity tester.Lightweight design, connect alligator clips and the instrument suspends from wire/cable.Visual (flashing bi-color LEDs) and audible (pulsating beeper) indicators.Probe flashes green or red to indicate polarity.Remote probe allows for one person operation.Capable of sending signal on cable/wire runs up to 10,000 ft (3000m).Includes battery.Lightweight and compact size allows for easy one person operation.

This temperature and humidity meter simultaneously displays indoor/outdoor temperature, humidity, min/max readings and time. The R6000 features a 6’ (72”) cable with mounted sensor for outdoor temperature measurement and humidity status icons to quickly indicate humidity conditions..Measures indoor/outdoor temperature and humidity.User selectable unit of measure °F / °C.Internal memory stores min/max temperature and humidity readings.Waterproof sensor for outdoor temperature measurement with 6’ (72”) cable.Built-in alarm clock and time display.Desktop or wall mount.Temperature Range (IN): -10 to 50℃ (14 to 122 °F).Temperature Range (OUT): -40 to 50℃ (-40 to 122 °F).Humidity Range: 20 to 95% RH.Includes external temperature probe and battery.Measures indoor/outdoor temperature and humidity, Internal memory stores maximum and minimum temperature and humidity readings.

This true RMS watt meter is capable of measuring up to 6000 watts, 600 volts (AC), 10 amps (AC) and power factor. The R5000 features a large backlit LCD display and maximum, minimum and data hold functions..Measures Watt, AC Voltage/Current and Power Factor.Large backlit dual LCD display.Max/Min and Data Hold Functions.Cat. III 600V safety rating.Low battery indicator and auto shut off.Safety Data Sheet.Dual LCD display with backlight simultaneously displays watt and power factor measurements.

This digital stem thermometer is stainless steel and offers a quick response and laboratory accuracy..Measures temperature from -40 to 482 degrees Fahrenheit (-40 to 250 degrees Celsius).8.3"H x 1.25"W x 0.75"D.Blue.Easy to read LCD display.Selectable degrees Fahrenheit or degrees Celsius.Display updates every two seconds.Max /Min memory records highest and lowest temperatures.Data Hold button lets you freeze a reading.Auto power off.Resolution of 0.1 degree Fahrenheit/0.1degree Celsius.Accuracy of + or -1.5% of reading + or -2 degree.Weighs 1.23 oz. (35gram).Includes a 1.5V LR44 button battery and a protective probe cover

This infrared thermometer by Reed Instruments has a Type-K thermocouple input which allows users to connect probes that measure up to 2498 degrees Fahrenheit (1370 degrees Celsius). Featuring a 55:1 distance-to-spot ratio, the thermometer has the ability to track maximum, minimum, average, and differential readings as well as ambient temperature, relative humidity, dew point temperature, and wet bulb temperature. The thermometer also features a trigger lock for continuous monitoring, the ability to set high/low audible alarms and internally store up to 999 (data points)..This infrared thermometer is perfect for high-temperature industrial applications, including furnace kilns, heat transfer pipes, metal refining, floor heating, cement, or petrochemical environments.Kit includes: infrared thermometer, USB cable, Type-K bead thermocouple, hard carrying case.Dimensions: 8.07"H x 2.56"W x 4.88"D.Weight: 13.12 oz..Built-in thermocouple input for contact measurement.Built-in laser pointer identifies target area.Featuring a 55:1 distance-to-spot ratio, the thermometer has the ability to track maximum, minimum, average, and differential readings as well as ambient temperature, relative humidity, dew point temperature, and wet bulb temperature.Features a high-resolution 2.4" TFT color LCD.Offers digitally adjustable emissivity and an adjustable audio alarm.Internal memory stores up to 999 data points.Trigger lock for continuous monitoring.Features a low battery indicator and auto shutoff.IR temperature measuring range: -58 to 3362 degrees Fahrenheit.Contact temperature (Type-K) measuring range: -58 to 2498 degrees Fahrenheit.Ambient temperature measuring range: 14 to 122 degrees Fahrenheit.3.7V 2600mAh rechargeable Li-ion battery provides a life of up to 20 hours with a 3-hour charging time via USB Type-C.Applications: verify mechanical (bearings, motors) or electrical (circuit breaker boxes) equipment; calibration and control of heater and oven temperatures; monitoring materials in processes involving heating and/or cooling; quality control monitoring; research and development applications; automotive diagnostics; conduct HVAC/R energy audits.Meets or exceeds the CE, RoHS, and UKCA standards.1-year manufacturer limited warranty.Safety Data Sheet

This compact autoranging clamp meter is capable of measuring AC current, AC/DC voltage, resistance, frequency, capacitance, duty cycle and temperature. Featuring double molded plastic housing, the R5020 includes diode check and continuity functions and a non-contact voltage detector built into the clamp tip..Measures AC current, AC/ DC voltage, resistance, capacitance, frequency, duty cycle and temperature.4000-count LCD display with low battery and over range indicators.Built-in non-contact voltage detector with LED indicator.Display hold and relative mode.Diode test and continuity check functions.Durable double molded plastic housing.Cat. III 600V safety rating.7.9"H x 2.6"W x 1.5"D.Blue.AC current range of 40, 400A.AC accuracy of + or -(2.5% rdg. + 8 dgt.).AC resolution of 0.01, 0.1A.AC voltage range of 4, 40, 400, 600V.DC voltage range of 400mV, 4, 40, 400, 600V.AC voltage accuracy of + or -(1.8% rdg. + 8 dgt.).DC voltage accuracy of + or -(1.5% rdg. + 2 dgt.).AC voltage resolution of 0.001, 0.01, 0.1, 1V.DC voltage resolution of 0.1mV, 0.001, 0.01, 0.1, 1V.Resistance range of 400ohm, 4, 40, 400kohm, 4, 40Mohm.Includes test leads, a thermocouple wire probe, a thermocouple adapter, batteries and a soft carrying case.Compact AC clamp meter with built-in non-contact voltage detector and contact thermometer

This compact air velocity meter (anemometer) measures in fpm, m/s, kph, mph and knots. The R1900 keeps track of maximum and average readings and features a data hold function and low friction rotating vane for improved accuracy..Measures fpm, m/s, kph, mph, knots and temperature.Designed for one-handed operation.Backlit dual LCD display.Beaufort wind force scale.Max, average and data hold functions.Low battery indicator and auto shut off.Dual LCD screen simultaneously displays air velocity and temperature.

The R5500 instrument features a Circuit Breaker finder, a Circuit Tester and a GfCI Receptacle Tester. Quickly and easily identify the correct circuit breaker protecting a specific electrical circuit without service interruption..Simply plug the transmitter into a receptacle and scan breaker box to identify the circuit.Detects 5 3-wire receptacle wiring faults.Built-in GFCI receptacle check function.Adjustable sensitivity wheel quickly identifies breaker.Audible (buzzer) and visual (LED) indicators assist in identification.4" (h) x 2.2" (w) x 1.2" (d).Blue.Weighs 3.88oz.frequency range of 47 to 63Hz.Receiver is powered by a 9V battery (included).3-in-1 tester locates breakers, tests receptacles and GFCI circuits