Equipment Rack

Rack power distribution unit with 100 - 240 V nominal input voltage and 20 A maximum input current..Power distribution unit.Dimensions: 15.28"H x 1.72"W x 3.66"D.Color: Black and silver.Nominal voltage: 100 - 240 V Input, Frequency: 50 - 60 Hz.Input current: 20 A, Regulatory derated input current: 16 A.Input receptacles: IEC-320 C20.Rack height: 1U.Certifications and standards: cUL Listed, CE, EAC, IRAM, PSE, UL Listed, VDE, REACH, RoHS.Weight: 3.3 lbs.2 years repair or replace warranty

The 4XEM M5 rack mounting screws and cage nuts pack is suitable for use with server racks/cabinets and assures that your gear is firmly installed in your storage cabinet and server rack. This pack contains 50 M5 stainless steel screws as well as nuts. It offers high performance, premium quality as well as durability..Stainless steel construction offers durability.Form factor: Rack-mountable.Suitable for use with APC NetShelter SX 42U/48U enclosures and PC.Necessary for installing server, network, AV and other rack mount equipment.M5 mounting screws and cage nuts ensures your gear is securely installed in your storage cabinet or server rack.Contains 50 screws and nuts.Comes with 3 years limited warranty.Silver

CyberPower CPS1215RMS Rack Mountable 1.8 kVA Power Distribution Unit.Input voltage: 120 - 330 VAC clamping.Output voltage: 120 VAC (60 Hz).Power capacity: 1.8 kVA.Plug/connector type: NEMA 5 15P straight, Receptacles: 12 x NEMA 5 15R.Form factor: 1U 19" rack mountable.Cord length: 15'.LED indicator: Power on (Yellow), ground (Green), surge (Red).Surge energy rating: 1800 J.LED status lights indicate Power On and wiring faults.Provides shielding against electromagnetic interference & radio frequency signals. Most co mmonly, this is used to prevent line noise or hu mming that occurs over telephone lines or stereo electronics.Convenient unit reset in case of an overload.EMI / RFI 150KHz to 150MHz filtering, 15 A circuit breaker, lighted on/off switch.Operating temperature: 32 - 104 deg F, 5 - 149 deg F (Non operating), Operating humidity: 0 - 95% non condensing, 0 - 95% non condensing (Non operating), Altitude: 0 - 10000 ft operating, 0 - 50000 ft non operating.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RMS unit, warranty card/manual.Weight: 5.10 lbs..Warranty: 3 years limited

The APC NetShelter SX Enclosure with Roof and Sides - Rack - 24U is perfect for everyday use..Rack enclosure cabinet is perfect for server/LAN switch/PDU.Dimensions: 47.19"H x 23.62"W x 42.13"D.Compatible with NetShelter SX enclosure.Comes in black color.Weight capacity: 2250 lbs. (dynamic load), 3000 lbs. (static load).Rack height: 24U.Door material gauge: 18, rail material gauge: 14, roof/top material gauge: 18, side panel material gauge: 18.APC cooling, power distribution and cable management products work seamlessly with the enclosures to provide IT infrastructure support system.Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment.Perforated front & rear doors provide ample ventilation for servers & networking equipment, split rear doors improve access & serviceability.Front door can be moved to the opposite side or interchanged with rear doors, doors are easily removed with simple lift-off design.Half-height quick release side panels reduce size & weight for easy handling & access to equipment.Includes rack cabinet, baying hardware, documentation CD, doors, installation guide, doors and side panels with identical lock, leveling feet.Meets UL 60950, EIA-310-D, RoHS standards.Weight: 196 lbs..Comes with 5 year warranty

Heavy-duty cold-rolled steel rack mount with textured powder coat finish..Material: Cold-rolled steel (CRS).Rack size: 25U.Black.Dimensions: 49.3"(H) x 20.2"(W) x 22 - 39.3"(D).Supports 1000 lbs. of rackmount equipment.Adjustable mounting depth (22 to 39 inches).Textured powder coat finish.Heavy-duty cold-rolled steel.Bolt down provisions, self squaring design.Numbered mounting positions.Weight capacity - stationary: 1000 lbs..Grounding lug: Included screws, nuts, and washers secure user-supplied grounding wire to front or back frames, installed whole system maximum rack depth: 39.3", installed whole system minimum rack depth: 22.Certifications: NOM (Mexico): tested to NOM (Mexico), Approvals: EIA-310-D, IEC 60297-3-100, DIN 41494, RoHS.Weight: 45 lbs..Warranty: 5 years limited.Tripp Lite Smartrack rack frame is suitable for 19’’ rack mount applications and multiple units can be bolted together side by side.

Control your server or KVM switch from a centralized rack console. This rack-mount KVM console provides complete keyboard, monitor and mouse control for a single server or multiple servers, connected through a separate KVM switch (sold separately). The 19 in. console installs into 1U of rack space, offering a space-efficient solution for complete console control. Maximize your IT budget, minimize your hassle This KVM console provides all the essential controls you'll need to manage your server room at a low cost. The console features a built-in keyboard and a touchpad for intuitive control, as well as an LCD display that supports resolutions up to 1280x1024. Maximize your screen space This versatile LCD console has a 19 in. screen. The increased screen space allows you to run multiple applications on the same screen, increasing your productivity. Clutter-free monitoring The rack-mount LCD console slides out from 1U of rack space, enabling you to easily monitor and control a single server or multiple servers when connected through a KVM switch. The rack-mount VGA console features a handle that makes it easy to slide the console in and out of the server rack, keeping your area organized and clutter-free. Hassle-free system integration The rack console features a single-port KVM module, which enables you to connect it directly to a server. The module offers the flexibility you need to easily integrate it into your existing server infrastructure. The RKCONS1901 is backed by a StarTech.com 2-year warranty and free lifetime technical support..VGA: Yes.Number of VGA Ports: 1.Screen Resolution: 1280 x 1024.Black

This StarTech.com equipment rack bracket lets you attach your 3U rack mount equipment to a wall so that you don't have to worry about storing it in your server racks. It can hold a total of 125.3 pounds thanks to its two-post construction, and it comes with all the screws you need for easy installation..Dimensions: 5.9inch(H) x 19.8inch(W) x 5.9inch(D).Weight capacity: 125.3 lbs..Arrives fully assembled with cage screws and nuts for mounting equipment into the rack.Equipment can be vertically wall mounted, or horizontally under a desk.Compatible with most 19inch rack mountable equipmen.Rack type: 2 post.U height: 3U.Frame type: Open frame.Front door type: Open.Wall mountable.Industry standards: EIA RS310-C.Compatibility: Network device, power strip, patch panel.Package contents: Vertical wall mount bracket, cage nuts and screws, self tapping wood screws - 3/16inch x 1 1/2inch.Weight: 33.2 oz.Warranty: Lifetime limited.StarTech.com Equipment Rack Bracket - Attach Your 3U Equipment with Ease

Store your servers network and telecommunications equipment in this adjustable 25U rack - 25U Adjustable Depth Open Frame 4 Post Server Rack Cabinet - Flat Pack w/ Casters Levelers Cable Management Hooks - 4 Post Rack - 25U Server Rack - Supports a static loading capacity of 1200lbs (544kg) - Easy-to-read Unit (U) and depth adjustment markings.Mount your equipment easily, with clearly marked rack units (U) and depth.Adapt the rack to your equipment easily, with an adjustable depth design.Customize the rack to fit your environment using the included optional accessories.25U Open frame design.Adjustable mounting depth from 22 - 40in.Supports a static loading capacity of 1200lbs (544kg).Easy-to-read rack Unit (U) and depth adjustment markings.Casters, leveling feet and cable management hooks included

StarTech.com Cage nuts are designed with square cage design with square holes and are used to for mounting equipment securely. Nuts include 50 pieces in a package which provides enough mounting hardware to setup any rack. ..M5 cage nuts.Mount server, telecom and A/V equipment with these high quality nuts.Package includes: 50 M5 nuts.Square cage nut design for racks and cabinets with square holes.Stainless steel construction.Includes: 1 Pkg of cage nuts for cabinet rails.Thread Type(s): M5.Compatibility: Cabinet rails.Designed for: P/N: RKPW161915, 4POSTRACK25, 2POSTRACK, RK2236BKF, RK1219WALL, RK1219WALH, RK4242BKNS, RK4242BK, RK4236BKNS, RK4236BK, 4POSTRACkBK, CAB1019WALL, CABSERVPOSTS, 2636CABINET, 7236CABINET.Certifications & Standards: RoHS, Green compliant.Warranty: Lifetime limited.StarTech.com Cage nuts are used for mounting standard rack equipment into a server rack or cabinet and has stainless steel construction for added durability, sold as 50 per pack.

Control your server or KVM switch from a centralized LCD KVM drawer. This rack-mount KVM console provides complete keyboard, monitor and mouse control for eight computers. The rack-mount console installs into 1U of rack space, offering a space-efficient solution for complete console control. Maximize your IT budget, minimize your hassle This 8-port KVM switch provides all the essential controls you'll need to manage your server room at a low cost. The console features a built-in touchpad, keyboard for intuitive control and an LCD display that supports resolutions up to 1280x1024. Maximize your screen space This versatile rack-mount LCD console has a 19 in. screen. The increased screen space allows you to run multiple applications on the same screen, increasing your productivity. Clutter-free monitoring The console slides out from 1U of rack space, enabling you to easily monitor and control eight servers and even more if connecting through a KVM switch. The rackmount VGA console features a handle for easy sliding in and out of the server rack, keeping your area organized and clutter-free. Hassle-free system integration The rackmount LCD features an 8-port KVM module, which enables you to connect it directly to eight servers. You can also connect to additional servers by connecting to KVM switches in a cascaded (daisy-chained) configuration. The KVM module offers the flexibility you need for easily integrating the console into your existing server infrastructure. The RKCONS1908K is backed by a StarTech.com 2-year warranty and free lifetime technical support..PS/2 Port: Yes.USB: Yes.VGA: Yes.Black

The EB4 is an economical steel blank panel designed to cover 4 rack units (4RU) of open space on an installed rack face. Constructed with sturdy steel and finished with a durable flat black powder coat, the EB4 panel is both durable and visually appealing. The flanged design of the panel ensures additional support and stability. The EB4 panel is designed to be sturdy, providing reliable protection for your equipment. With its economical price and sturdy construction, the Middle Atlantic EB4 blank panel is an essential accessory for anyone who needs to cover 4RU of open space on their rack face. The durable flat black powder coat finish ensures a professional appearance while the steel construction ensures long-lasting use..This 4U flanged blank rack panel is designed for use in standard 19-inch server racks and cabinets to cover unused rack spaces, improving airflow and maintaining a clean, professional appearance.The EB4 panel is rack-mountable and fits into any EIA-compliant 19-inch rack system.Package includes one 4U flanged blank rack panel.Constructed from durable steel with a flat black powder coat finish.Flanged design adds rigidity and strength.Helps prevent heat recirculation by blocking bypass airflow.Enhances cooling efficiency and extends equipment life.Compatible with all standard 19-inch EIA-compliant server racks and enclosures; ideal for AV, IT, and data center applications.Backed by a lifetime warranty from Middle Atlantic.RoHS and Greenguard certified; manufactured in the USA with sustainable practices

APC® Power distribution unit has a input voltage rating of 200/208/230 VAC and output voltage rating of 120 V. Power distribution unit comes with rack mounting brackets for easy installation..NEMA L14-30P 8.53m 24A 200 V, 208 V, 230 V input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-20R.Black.Cord length: 28'.Output voltage: 120 V.Number of power cords: 1.Maximum total output current draw per phase: 24A, maximum line current per phase: 30 A, Load capacity: 5760 VA.Dimensions: 89 mm(H) x 437 mm(W) x 89 mm(D).Operating environment/ relative humidity/ elevation: 0 - 45 deg C/ 0 - 95%/ 0 - 3000 m, storage temperature/ relative humidity/ elevation: -25 - 65 deg C/ 0 - 95%/ 0 - 15000 m.Offers basic rack PDUs that mount veritcally, without tools in the rear channel of a net shelter VX.Package contents: Basic rack 4.992kVA PDU, installation guide, rack mounting brackets.Certifications and standards: cUL listed, CSA C22.2 No. 107.1, UL 1778, UL listed, RoHS,.Weight: 14 lbs..Warranty: 2 years limited.Basic rack 2U 120V power distribution unit mount veritcally, Without tools in the rear channel of a netshelter VX.

This rack is a perfect solution for small or home offices, and works with all 19-inch rack mount equipment. It is ideal for places where there is no room for a full size rack, as you can flush mount your equipment vertically to the wall or horizontally under a desk..Dimensions 4"(H) x 19.8"(W) x 4"(L).Maximum load capacity 70 lbs..Finish Black, textured powder coat.Material Steel.Horizontal mounting may require additional bracket depending upon equipment depth and weight.Mounts on 16" wooden, center studs.Compatibilty Most OEM slide rails Dell, HP, IBM, Apple, Sun, Intel, Cisco, Juniper, 3COM, round hole, threaded hole, and square hole equipment and slides, powerstrips, network devices, patch panels.Rack unit 2U height; Rack size 19".Certifications EIA-310.Innovation First 2URACK-119 Wall Mount Rack Bracket can be vertically mounted in any orientation and is a perfect solution for small offices or home offices.

Providing centralized control of your single PC or dozens of servers, this dual rail rackmount KVM console also gives you easy access to and visibility of your system while it's mounted in a server rack or cabinet. Dual Rail Design: The dual rail KVM console design maximizes space in your datacenter's rack cabinets by allowing the LCD monitor and the keyboard/mouse to move separately from each other. You can tuck the keyboard away while the display stays active, allowing you to conveniently monitor your computer through closed glass or mesh rack cabinet doors. High Definition LCD Monitor: The 1080p KVM console is 17.3" and LED back-lit, for low power consumption. It supports high definition resolutions up to 1920x1080 providing sharper video performance. Digital & Analog Support: Whether you are running a multi-port KVM with an analog display or a single port KVM with a high definition display, this DVI/ VGA KVM console can support both signals. Simple Setup: This KVM console comes with everything you need to set up: ? 1 Audio Cable ? 1 Set of KVM Cables (USB/VGA) ? 2 Rear Mounting Brackets ? M5 Cage Nuts and Screws Once your KVM console is mounted to your rack, you can use the USB port on the front to easily connect any USB compatible peripheral such as a fingerprint scanner or mousethumb drive. StarTech offers a wide selection of KVM consoles to help you access your systems more efficiently without the expense and clutter of extra peripherals. This dual rail KVM console is backed by a 2-year warranty and free lifetime technical support..Slide the rackmount monitor and keyboard/mouse independently with dual-rail KVM console design.1080p KVM console supports high-definition resolutions up to 1920x1080.Supports both digital and analog connections with DVI and VGA ports.Set up easily with included brackets, cables and screws.Connect a fingerprint scanner or other peripheral to the USB port on front of KVM console

APC Smart-UPS X 3000VA Rack/Tower UPS, 7-Outlets, Black (SMX3000RMLV2U).3 kVA/2.70 kW.2URack-mountable 0.10 Hour Full Load.1 x NEMA L5-30R, 3 x NEMA 5-15R, 3 x NEMA 5-20R.Output voltage of 120 V to ensure adequate power supply.LED indicators for on line, on battery, replace battery, overload and multi-function LCD status and control console aid in seamless navigation.4U rack or tower mountable form features 1 x NEMA L5-30R, 6 x NEMA 5-15R, 3 x NEMA 5-20R receptacles.Comes with 7 outlets, a 1 x SmartSlot and NEMA L5-30P plug for seamless connectivity.Leakproof battery provides optimum security.8.01' cord allows you to set up your system at a comfortable distance.BSMI, CSA, EN 50091-2, EN 55022 Class A, ENERGY STAR (USA), FCC Part 15 Class A, NOM, TUV, UL 1778, VCCI Class A, REACH, RoHS compliant.3-year warranty.The APC SMX3000RMLV2U 120 V Smart-UPS is an ideal power supply system to guard servers, telecom equipment and other networking hardware.

The Eaton® EMA108-10 G3 managed Power distribution unit in black, provides a billing grade accuracy monitoring at the outlet level on a local LCD pixel display or over a network connection. The high accuracy meter will measure voltage, current, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting..Power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 66.5"H x 2.05"W x 2.56"D.Comes in black color.Input: (1) NEMA L5-30P, output: (24) NEMA 5-20R.Input current: 24 A, frequency: 50 - 60 Hz.Input voltage: 120 V, output voltage: 120 V, single phase.Form factor: Vertical.Rack height: 0U.Serial interface: RS232, Ethernet interface: 10/100 Ethernet.Cable length: 10'.Outlet control, voltage monitoring, current monitoring: Input, section, outlet, +/- 1%.Enables on/off/reboot capabilities for a single piece of equipment with outlet-level control.Circuit breakers: (2) 20 A.Manages entire environment remotely over the network from a single interface.Meets UL, cUL standards

Are you looking to run edge AI workloads like Computer Vision that need GPU accelerators or distributed data solutions that require expandable storage? The HPE ProLiant DL320 Gen11 is a 1U 1P server with a unique compact and workload-driven modular design that is purpose-built for edge computing delivering exceptional performance at 1P economics and an excellent choice for both virtualized and containerized workloads..This Rack Mount Server is designed for high-performance computing, making it suitable for various demanding applications..Equipped with an Intel Xeon Gold 5416S processor with 16 cores and a 30 MB L3 cache, this server includes 64 GB of DDR5 SDRAM (configured as 2 x 32 GB modules) for high-speed performance at an effective memory speed of 4800 MT/s..It comes with 64 GB of DDR5 SDRAM and includes the HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device, supporting RAID levels 0, 1, 5, and 10..Features one PCIe Gen5 slot and one OCP 3.0 PCIe Gen5 slot, offering flexibility for adding components or upgrading the server's capabilities..It features robust connectivity options, including two Gigabit Ethernet (1GbE) ports powered by the Broadcom BCM5720 Ethernet controller..Equipped with two 800W Flex Slot Platinum Hot Plug Low Halogen Power Supplies, the server includes HPE Integrated Lights-Out 6 (iLO 6) for efficient power monitoring and management, allowing administrators to securely configure, monitor, and update the server remotely for optimal performance and energy efficiency..It has dimensions of 1.7 inches in height, 17.1 inches in width and 23.8 inches in depth..Certifications & Standards: ENERGY STAR 4.0, Energy-related Products Directive Lot 9 (ErP Lot 9), Waste Electrical and Electronic Equipment Directive (WEEE).Comes with 3 years limited warranty.

The Vertiv Liebert PSI5 1440VA UPS is designed to protect and extend the life of your electronic devices in school, home and office. This 1U rack mount UPS offers cost-effective protection from downtime and damage caused by power outages, brownouts, sags, surges or noise interference. Automatic Voltage Regulation (AVR) extends battery life and safeguards critical equipment. Voltage regulation is from 83 to 159 VAC without using the battery. With advanced pure sine wave output, this line interactive UPS ensures availability of critical IT applications like network closets and small data centers. This battery backup allows orderly shutdown of critical equipment. It takes less than 6 milliseconds transfer time to battery. Add an optional Vertiv Liebert Unity communication card and remotely monitor up to 50 UPS systems through the free Vertiv Trellis Power Insight Application. It has a 2-year Vertiv UPS warranty with optional extensions for up to 5 years total coverage..POWER PROTECTION: The 1440VA UPS has AVR to correct power disturbances..SPACE-SAVING 1U RACK: Get similar features as a 2U battery backup in a compact 1U rack space..MORE USABLE POWER: This single phase line interactive UPS has 0.9 output power factor..REMOTE MANAGEMENT CAPABILITY: Add a communication card to this UPS to monitor devices remotely..PROGRAMMABLE OUTLETS: Get 5 total outlets with 2 programmable outlets to prioritize critical loads.

Providing centralized control of your PC, server, or KVM switch, this single-port rackmount KVM console gives you easy access to your connected system. With a minimal footprint, it mounts in a server rack or cabinet using only 1U of rack space. An All-Inclusive Solution The 1U rackmount console features a built-in keyboard, a touchpad for intuitive control, and a 17-inch LCD display that supports resolutions up to 1280x1024. This single-port KVM console includes everything you need to set up right out of the box: 1 VGA KVM Cable . Mounting Rails . M5 Cage Nuts and Screws . Simple System Integration The rack console features a single-port KVM module, which can be connected directly to a server or PC, or to a KVM switch for access to multiple systems. The KVM module offers the flexibility you need for easily integrating the console into your existing server infrastructure. StarTech Rack Consoles Rack consoles provide convenient, rack-mounted control options for single servers or entire server rooms. KVM consoles include LCD display, keyboard, and trackpad, all sliding into 1U of rack space. RKCONS1701 is backed by a StarTech 2-year warranty and free lifetime technical support..Reduce your server room clutter with a 1U rackmount design.Intuitive system integration with direct support for your PC or server.Ready to use with built-in touchpad and keyboard.Save money and reduce hassle with a cost-effective rackmount LCD console.Set up easily?with?all necessary?mounting?brackets,?cables and screws?included.Black

By providing easy access to multiple servers and other IT gear, the Vertiv Avocent Local Rack Access (LRA) Console makes software upgrades, troubleshooting and system monitoring more convenient and less time consuming, protecting uptime and staff time. The rackmount console cuts the clutter of cumbersome crash carts, monitors and keyboards. The Vertiv Avocent LRA Console is compatible with most of the Vertiv Avocent KVM switches and leaves room for KVMs or other equipment in the same 1U tray for organized operation. The tray features USB and VGA interfaces compatible with a range of network servers and other appliances. Its high-resolution, widescreen 19" LED LCD panel and full keyboard with touchpad make it easy to use, and it has a low power draw during both operation and standby..SIMPLIFIED MANAGEMENT: Simplifies software upgrades, troubleshooting, and system monitoring by providing easy, localized access to multiple servers..1U DESIGN: Includes room for KVM installation in same tray, as well as USB and VGA interfaces that are broadly compatible with servers and other appliances..KIT INCLUDES: 1x transmitter and 1x receiver, 2x VGA cables, 1x 3.5 mm audio cable, 2x USB B to A cables, 16 MPUIQ-VMCHS server interface module cables and 2x power supplies with power cords..DISPLAY: Widescreen 19" LED LCD panel with a 16:9 aspect ratio delivers resolutions up to 1600 x 1200..EASE OF USE: Full keyboard with touchpad provides ease of use.

The Juniper® rack mount kit is suitable for use with SRX300 service gateway..Rack mounting kit without adaptor tray.Ideal to mount standard rack mount.Provide solutions for mounting monitors, keyboards and products.Rack mount kit is sold as individually.

StarTech.com® 2U Horizontal finger duct rack cable management panel in black color mounts to a standard 19" 2 or 4-post rack to organize horizontal cabling, through a covered cable duct. Features a removable top cover that holds it easy to add or remove bundled cables quickly. Helps to increase the longevity of server and networking equipment interfaces by providing cable strain relief. Includes one horizontal cable duct, four M5x15 screws, M5 cage nuts, M6x15 screws and M6 cage nuts..Cable management panel is perfect to organize horizontal cabling, through a covered cable duct.Comes in black color for new look and is made of sturdy steel for durability.Measures 3.5"H x 19"W x 3.1"D.Features front mounting for easy installation.Utilizes 1U rack height for designating the usable space.Includes removable top cover that helps for easy adding or removal of bundled cables quickly.Provides a series of fingers on either side, as well as pass-through holes at the back to helps to route cables.Offers better solution for your server room or wiring closet.Used to mount standard 19" 2 or 4-post server racks.Use the fingers on either side or the rear pass - through holes to detache and route cables easily.Maximize the longevity of server and networking equipment interfaces by offering cable strain relief.Contains horizontal cable duct, 4 x M5x15 screws, 4 x M5 cage nuts, 4 - M6x15 screws, 4 x M6 cage nuts fro reliable operation.Meets RoHS Compliant and is CE listed.Weighs up to 33.7 oz.Comes with 2 years warranty.StarTech.com® 2U Horizontal finger duct rack cable management panel in black color is made of high-quality steel for durability. Comes with 2 sets of rack screws.

The dongleserver Pro provides secure and reliable access to software license dongles via a network. It has four USB 3.0 SuperSpeed and four USB 2.0 Hi-Speed ports. The handy version of the dongle server has been designed for use in office environments. The lockable housing keeps your valuable USB dongles safe in accessible areas. With the optional rack mount kit, the dongle server can be installed in the server room as well. With the dongleserver Pro by SEH, dongles cannot only be used via LAN connections but also via VPN, VLAN, and the Internet. This allows for access from the most diverse environments — the potential application scenarios are endless!.Thish rack-mount server provides secure and reliable access to software license dongles via a network.SD card for automatic configuration backup and transfer to other devices.Dimensions: 8.46"W x 1.77"H x 6.1D.Contains 1 × 10BaseT/100BaseTX/1000BaseT (IEEE 802.3), 8 x USB ports: 4 × USB 3.0 ports (SuperSpeed), 4 × USB 2.0 ports (Hi-Speed).Configuration and management requirements: Microsoft Windows, Linux, OS X/mac OS.Includes two installed power supplies and two network connections to ensure maximum reliability.Meets or exceeds CE: EN55024:2010 + A1:2015, EN55032:2015 class B; IFCC: Part 15, subpart B, class B;RoHS (EN50581:2012) standards.Provides IPv6 full support, simplified configuration and administration (monitoring and logging with connection to monitoring server services, manage access rights individually, securing of local event log on remote WebDAV server).Save time and costs: USB dongles are safe from loss, theft, wear and tear, and damage.Virtual USB cable extension via the network for the flexible and independent use of up to eight USB dongles.Provides a direct, safe point-to-point connection via the network, SSL/TLS encryption, access protection and many more security features protect USB dongles from unauthorized access.Dongles can be assigned to different users, departments, customers etc..Can be installed in the server room as well.Features status display and acoustic warnings.Suitable for legal and professional offices, small to medium-sized companies, educational institutions such as universities and schools, virtual network environments, scientific institutions such as research facilities

The Tripp Lite PDUMH15-ISO 1.44 kW single-phase metered PDU with isobar surge suppression, provides real-time local reporting of load level in amps and noise suppression. It features a digital display that shows output current to prevent circuit overload when additional equipment is added and has a set of three front-panel LEDs to show wiring fault, protection present and line OK status. This PDU has a rugged all-metal housing and offers rackmount installation with included mounting accessories. It is compatible with 120 VAC sine wave input. The 1U PDU features NEMA 5-15P 15 A 120 V input plug with 15' cord and 14 NEMA 5-15R outlets..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Sheet metal construction for long lasting durability.Receptacles: NEMA 5-15P input and 14 x NEMA 5-15R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 15 A.Output capacity: 1.44 kW.Input cord length: 15'.Form factor: Horizontal (1U, 2U).Offers overload and surge protection.AC suppression joule rating: 3840 J, AC suppression surge current rating: 60000 A, Clamping voltage (RMS): 140 V.Front panel LEDs: Set of three diagnostic LEDs report LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) status.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Built-in two digit visual meter continuously reports PDU load level in amps.Offers SOBAR Network-grade AC surge and noise suppression with EMI/RFI filtering.Contains owner's manual with warranty information.Meets UL1449 3rd Edition (USA) and CSA (Canada), RoHS standards or certifications.Weight: 4.6 lbs..Comes with 2 years limited warranty

Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 12 A.Power capacity: 1.44 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-15P.Output receptacles: 10 x NEMA 5-15R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty

Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 16 A.Power capacity: 1.92 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-20P.Output receptacles: 10 x NEMA 5-20R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty

Tripp Lite Single phase basic power distribution unit has NEMA 5-20P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA 5-20P 15' 20 A 120 V nominal input.120 V 50/60 Hz output.Outlet connector: 13 NEMA 5-15/20R.Overload protection: 20 A.1U/0U vertical rack mount.Package includes: PDU1220 rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 4 1/2" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

Tripp Lite Single phase basic power distribution unit has NEMA 5-15P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA 5-15P 15' 15 A 120 V nominal input.120 V 50/60 Hz output.Outlet connector: 13 NEMA 5-15R.Overload protection: 15 A.1U/0U vertical rack mount.Package includes: PDU1215 rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 4 1/2" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

The Eaton 9PX2000RTN 2000VA dual conversion online tower/ rack mountable UPS in black/silver color, provides up to 1800 W of power to desktop computers, workstations, networking devices and home entertainment systems. It features a graphical LCD for local status updates and integrates with virtualized environments. The UPS safeguards your sensitive electrical equipment against damaging spikes and surges. The UPS supports both tower/rack mounting and has 7 power outlets, 1 x USB and RJ-45 interfaces for connection..Dual conversion online UPS protects the connected loads from surges, spikes, lightning and other power disturbances.Receptacles: 1 x NEMA L5-20R, 6 x NEMA 5-20R.Dimensions: 3.4"H x 17.3"W x 23.8"D.Graphical display.Input voltage: 100 to 144 VAC (full load), 60 to 144 VAC (<30% load), power: 1800 W.Meets IEEE ANSI C62.41 Cat B2, CE, cULus, NOM, IEC 62040-2 Cat C1, CISPR22, FCC part 15 Class B, VCCI Class B, ENERGY STAR, RoHS standards.Color: Black/silver, cable length: 8'.Design: 4 status-indicating LEDs.Interface: RS-232 ports, USB port as standard, 6' RS-232, USB cable.Form factor: Tower/rack mountable, transfer time: 0 ms, efficiency: 91% with resistive load.Output: 120 V default (100/110/120/125 V), +/- 1% steady-state (regulation), <3% for linear loads (THD).Battery: Sealed lead acid, maintenance free, ABM technology, 3-stage charging.Input: >0.99 (power factor), <5% (current distortion), 50/60 Hz (frequency).BTU: 578/hour (online), 974/hour (battery), audible noise: = 47 dB at 1m.Features ideal solution for rack and standalone installations in harsh electrical and critical applications.Includes network-MS Web/SNMP card, 4-post rail kit, safety manual, user manual, tower pedestals, RS-232 cable, intelligent power software suite CD.Temperature: 0 to 40 deg C (Operating), 0 to 35 deg C (Storage), 0 to 96% (Humidity).Weight: 61.5 lbs..Comes with 2 year warranty

6cb4c4e7fb34f3e3877940dfd1f0ef17.Zero transfer time between AC power and battery for uninterrupted operation.PDU keeps essential equipment powered during hot-swap battery replacement or repair.Delivers complete N+1 redundancy when used with loads up to 10kVA.Optional external batteries provide additional runtime for essential applications.Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.2-year limited warranty.$250,000 Ultimate Lifetime Insurance.One EPO (emergency power off), 1 management (USB) - 4 pin USB Type B, 1 management (RS-232).2U rack mountable form makes it convenient to install and use.Meets or exceeds FCC Part 15 A, NOM, EMI, CSA C22.2 No. 107.3.14, UL 1778 5th edition, and RoHS standards.Dimensions: 3.43"H x 17.3"W x 19.46"D.5-year manufacturer limited warranty

Providing centralized control of up to eight servers, this 8-port rackmount KVM console gives you easy access to your systems. With a minimal footprint, it mounts in a server rack or cabinet using only 1U of rack space. An All-Inclusive Solution The 1U rackmount console features a built-in keyboard, a touchpad for intuitive control, and a 17-inch LCD display that supports resolutions up to 1280x1024. This 8-port KVM console comes with everything you need to set up right out of the box: 8 VGA KVM Cables . Mounting Rails . M5 Cage Nuts and Screws . Simple System Integration With direct access to eight systems or servers, the 8-port KVM module gives you the flexibility you need to easily integrate the console into your existing server infrastructure. StarTech Rack Consoles Rack consoles provide convenient, rack-mounted control options for single servers or the entire server room. KVM consoles include LCD display, keyboard, and trackpad, all sliding into 1U of rack space. The RKCONS1708K is backed by a StarTech 2-year warranty and free lifetime technical support.Maximize your server rack space with a 1U rackmount design.Intuitive system integration with direct support for up to 8 servers.Ready to use with built-in touchpad and keyboard.Built in touchpad and keyboard.Save money and reduce hassle with a cost-effective rackmount LCD console.Black

Tripp Lite SmartPro 2200VA UPS for Rack Mounting, 8-Outlet, Black (2U).Intended for voice, data, medical and industrial networking applications.Automatic Voltage Regulation (AVR) corrects both under- and over-voltage conditions, as well as power failure.Network-type interfaces: HID-enabled USB, DB9 serial, SNMP/Web card.Output voltage of 2200 VA to ensure adequate power supply.Battery backup LCD display aids in seamless navigation.Rack/tower mountable form makes it convenient to install and use.Equipped with 8 outlets, a USB, DB-9, EPO and NEMA 5-20P for seamless connectivity.UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions alarm provide optimum security.10' cord allows you to set up your system at a comfortable distance.Tested to UL 1778 (USA), CSA (Canada), NOM (Mexico) and meets FCC Part 15 Category A (EMI) and RoHS compliant.2-year limited warranty, 3-year warranty with registration.The Tripp Lite SMART2200RMXL2U Smart Pro 120 V Line-Interactive Sine Wave UPS helps you maintain power by switching instantaneously to batteries, in the event of a power failure, or even during minor power fluctuations.

Compatibility: Computer accessories, printers, home theater equipment, a/v components, sound reinforcement, point-of-sale equipment.Input voltage: 110 VAC (89-147 VAC).Input connection: NEMA 5-15P input plug.12' power cord.Dimensions: 7 1/4"(H) x 19"(W) x 5"(D).Surge energy rating: 1440 J.Output voltage: 120 VAC.Current: 20 A.Frequency: 60 Hz.Outlets: 14 x NEMA 5-15R.Form factor: 1U rack mountable.Protection type: Surge, EMI / RFI, over voltage, brownout.Material: Steel.Noise suppression: 80 dB EMI / RFI.Status indicators: Front panel 7 LEDs show incoming voltage levels, surge suppression, line status.Compatibility: Computer accessories, printers, home theater equipment, a/v components, sound reinforcement, point-of-sale equipment.Load capacity: 2400 W.Includes 2400W rack mount line conditioner, LCR2400 line conditioner, mounting hardware, instruction manual.Warranty: 2 years limited.Tripp Lite 14-Outlet mini tower line conditioner with 1440 J energy rating features 7 diagnostic LEDs which display incoming voltage level, surge suppression status and line fault status.

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 13.8"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

APC® Basic power distribution unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A. Unit has input voltage rating of 200 - 230 V and input current rating of 16 A..IEC-320 C20 8.2' 16 A 200 - 230 V input.120 - 230 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13, 2 IEC 320 C19.1U horizontal rack mount.Includes: Rack mounting brackets, user manual.Puts power where it is needed most-in the racks near the equipment.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: CE, GOST, VDE, Victoria, RoHS complaint.Weight: 9 lbs..Dimensions: 1 3/4"(H) x 17.60"(W) x 2 1/4"(D).2 years limited Mrf. warranty.APC® AP9559 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

APC AP9563 Basic Rack PDU includes installation guide and rack mounting brackets..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 16A.Nominal Input Voltage 100V, 120V.Contains Lithium Battery.2 years repair or replace warranty.2 years repair or replace warranty.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mfr. warranty.APC® AP9563 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

APC® Basic power distribution unit featuring NEMA 5-20R outlet connector can be 1U horizontal rack mounted and includes rack mounting brackets. Unit offers NEMA L5-20P input connections and has input current rating of 20 A..NEMA L5-20P 12' 20 A 100 - 120 V input.120 V 50/60 Hz output.Outlet connector: 10 NEMA 5-20R.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mrf. warranty.APC® AP9564 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

The StarTech® WALLMOUNT8 wall-mounting bracket provides 8U of space for mounting shallow rack-mount equipment that is 12" deep. This accessory in black, is made of solid steel and offers hassle-free installation. It optimizes your working space by efficiently mounting your equipment on your wall instead of taking up desk space or other usable surface areas..Wall mounting bracket provides 8U of space for mounting shallow rack-mount equipment that's 12" deep or less to the wall.Dimensions: 14.3"H x 20.5"W x 13.7"D (product), 14.3"H x 20.5"W x 12"D (external), 13.5"H x 17.7"W (internal).Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 80.2 lbs..Improve efficiency in your office or server room by mounting shallow equipment to the wall.Sturdy installation of mission critical equipment with solid steel design.Hassle-free setup with wall mounting holes spaced 16" apart, matching standard dry-wall framework.Rear access panel for cable management.Includes 1 x wall-mount bracket, 24 x M5 cage nuts, 24 x M5 screws with washers, 1 x M6 K-nut, 6 x wood screws, 1 x instruction manual.RoHS compliant.Weight: 17.8 lbs..Comes with lifetime warranty

SEH dongleserver ProMAX is the big version for server rooms and provides access to software license dongles via a network. Compared to the smaller dongleserver Pro, the dongleserver ProMAX offers additional reliability and redundancy with two built-in power supplies and two network connections. In addition, the parameters, passwords, and certificates are automatically backed up to an integrated SD card. The dongle server is also equipped with a multi-segment status and fault display for information at a glance. The optional telescopic slides facilitate device access in the server room..Thish rack-mount server provides access to software license dongles via a network.SD card for automatic configuration backup and transfer to other devices.Dimensions: 16.61"W x 1.73"H x 6.5D.Contains 2 × 10BaseT/100BaseTX/1000BaseT (IEEE 802.3), 20 x USB ports: 5 × USB 3.0 ports (SuperSpeed), 15 × USB 2.0 ports (Hi-Speed), 1 × SD card.Configuration and management requirements: Microsoft Windows, Linux, OS X/mac OS.Includes two installed power supplies and two network connections to ensure maximum reliability.Meets or exceeds CE: EN55035:2017, EN55032:2015 Class B; IEC 62368-1:2014 (Second Edition); FCC: Class B, subpart B, class B; ICES-003, Issue 6, Class B; RoHS (EN50581:2012) standards.Provides IPv6 full support, simplified configuration and administration (central management and analysis of logged data, monitoring and logging with connection to monitoring server services, securing of local event log on remote WebDAV server).Save time and costs: USB dongles are safe from loss, theft, wear and tear, and damage.Virtual cable extension via the network allows flexible and independent use of up to 20 dongles.Features freely configurable time slots and intervals of dongle activation.Provides maximum network availability through two network connections.Prepared for direct installation in a 19" server rack.Features status display and acoustic warnings.Suitable for large companies, SaaS service providers, cloud service providers, system houses, big services providers (IT, accounting, insurance etc.)

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles..Environmentally Friendly: Yes.Environmental Certification: RoHS, REACH.Input Voltage: 120 V AC

APC AP9567 Basic Rack PDU I=includes installation guide, rack mounting brackets, toolless mounting kit..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 15A.Nominal Input Voltage 100V, 120V.2 years repair or replace warranty.2 years repair or replace warranty.Includes: installation guide, Rack Mounting brackets, Toolless Mounting Kit.Units do not require additional tools to mount into APC netshelter enclosure, which allows the users to quickly and easily mount units in the rear of the enclosure.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Weight: 4.8 lbs..Dimensions: 24"(H) x 1.76"(W) x 1.76"(D).2 years limited Mrf. warranty.APC® AP9567 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

Tripp Lite™ Power distribution unit has a input/output voltage rating of 120 V and frequency rating of 50/60 Hz. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 24 x NEMA 5-15R.Cord length: 15'.Output voltage: 120 V, Overload protection: 30 A.Number of power cords: 1.Maximum input current: 30 A, PDU input voltage 100, 120, 127 V, Voltage compatibility: 120 VAC, Power rating: 24.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: Distance between Front outlets = 30.2mm, Distance between Rear outlets = 30.2mm, TVSS grounding: Back panel nut and bolt grounding lug.Style: Rackmount, vertical rackmount, wallmount/under-counter, Form factor supported: 1U rackmount, 0U vertical rackmount, wall-mount and undercounter installation supported.High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDU2430 rackmount power strip, warranty information, instruction manual.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 3.3 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - 120V Input/Output Rackmount

Tripp Lite Single phase basic power distribution unit can be 1U/0U vertical rack mounted. Unit has adjustable mounting brackets to offer easy installation..Single phase IEC-320 C20 16 A 100 - 240 V input.Input voltage: 100 - 240 V, frequency required: 50/60 Hz output.Outlet connector: 12 IEC C13, 2 IEC-C19.Overload protection: 16 A.1U/0U vertical rack mount.Package includes: PDU12IEC rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel grounding lug.Reversible housing; 4 1/4" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Weight: 3.2 lbs..Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

The Sonicwall TZ670 is the next-generation firewall (NGFW) with 10 Gigabit Ethernet interfaces. Designed for mid-sized organizations and distributed enterprise with SD-Branch locations, the TZ670 delivers industry-validated security effectiveness with best-in-class performance. TZ670 NGFWs address the growing trends in web encryption, connected devices and high-speed mobility by delivering a solution that meets the need for automated, realtime breach detection and prevention. This kit provides rack-mountable option for the SonicWall TZ670/570 firewalls..This kit provides rack-mountable option for the selected desktop firewalls.Compatible with SonicWall TZ670/570 firewalls.Comes in black

The 4XEM's 2U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 2U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 2U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 2U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 3.56"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 3.97 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

The B021-000-19-HD2 1U Rack-Mount Console combines a full keyboard, numeric keypad, touchpad and 19-inch color LCD for easy all-in-one control of a computer, server or KVM switch. Easy to install and simple to operate, it slides neatly into 1U of rack space when not in use. The rear DVI-I console port supports both digital and analog video signals for connecting to a DVI- or VGA-enabled server or KVM switch (a DVI to VGA adapter is included). The LCD screen supports video resolutions up to 1920 x 1080 (1080p). Video settings of the connected computer are automatically adjusted for optimal display on the LCD screen. USB 2.0 pass-through ports on the front and rear allow you to connect a USB peripheral, such as a flash drive or CAC card reader, to your computer with a USB cable (sold separately). The B021-000-19-HD2 mounts into 1U of space in an EIA-standard 19-inch rack using the included mounting brackets and user-supplied screws. Simply pull out the steel drawer and flip up the screen when needed, then slide it back into the rack in automatic sleep mode when you're finished. This keeps the keyboard and screen from blocking access to rack equipment when the console is not in use. This console is compatible with all major operating systems and KVM switches with a VGA or DVI monitor port and USB keyboard/mouse ports. This enables the B021-000-19-HD2 to be integrated into an existing system to provide secure management of critical network systems without a major investment in new hardware. Features Space-Saving Console for IT Environments Where Rack Space Is Limited 19 in. LCD monitor, keyboard, numeric keypad and touchpad All-in-one control of computer, server or KVM switch Supports video resolutions up to 1920 x 1080 (1080p) Detachable 6 ft. AC power cord with NEMA 5-15P and C13 connectors Accepts Digital and Analog Video Signals DVI-I port allows connection to DVI digital or VGA analog server or KVM switch DVI to VGA adapter included DDC2B emulation automatically adjusts video settings for optimal display on monitor USB 2.0 Pass-Through Ports Front and rear ports allow easy connection of USB peripheral, such as flash drive or CAC card reader USB cable sold separately Convenient Space-Saving Design Mounts in 1U of space in EIA-standard 19 in. 2- and 4-post racks Slides neatly out of sight when not in use Goes into automatic sleep mode when cover is closed Rack-mounting brackets included Supports Multiple Platforms for Maximum Flexibility Compatible with all major operating systems, including Windows , Mac OS , Linux , UNIX and Solaris Compatible with KVM switches with VGA or DVI port and USB keyboard/mouse ports TAA-Compliant Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.DVI-I port supports both digital and analog video signals.19 in. LCD screen supports video resolutions up to 1920 x 1080.USB pass-through port for connecting USB peripherals.Goes into automatic sleep mode when cover is closed.Compatible with all major operating systems.Black

Explore APC Rack Power Distribution in 3D Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles..Network (RJ-45): Yes.Environmentally Friendly: Yes.Environmental Certification: RoHS, REACH

The CyberPower PDU41001, an 8-outlet (front), 1U rackmount switched power distribution unit (PDU), provides 120V 15A output. It distributes power to eight NEMA 5-15R receptacles from a single NEMA 5-15P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser, and the RJ45 Ethernet port for network connection, or locally by using the LCD controls..Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Nominal input voltage 100-120VAC.Provides 100-120V 15A output.Dimensions: 1.75"H x 17.05"W x 4.41"D.Single NEMA 5-15P plug with unfiltered electrical pass-through.Distributes power to eight NEMA 5-15R receptacles.Provides local and remote control for individual and multiple outlets.Allows for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Included: four mounting brackets (two short and two long), 10 flat head M4x8 bracket mounting screws, cord retention tray, 10 cable ties, 6 M3x6 cord retention tray mounting screws, six M5x12 screws, six washers, RJ45/DB9 serial port connection cable, user manual, registration card, CD.3-year manufacturer limited warranty