Network Rack Shelves

The centered rack shelf can hold up to 200 lbs. (91 kg) of equipment and is constructed using 1/16 in (1.5 mm) thick SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment. Conveniently includes M6 square cage nuts and M6 screws to set it up in no time. The SHELF-2U-20-CENTER-V is backed by a StarTech.com lifetime warranty and free lifetime technical support..UNIVERSAL 19'' FIT: This 2U center-mounted vented server rack shelf is designed to fit 2-post EIA-310 compliant 19 in server racks and can accommodate an internal depth of 20in (50.8 cm) for your data, IT, networking, or other non-rack mountable equipment.CENTER MOUNT SHELF: The center-mount design allows for easy access to the front and back of the equipment, allowing for simple installation, maintenance and cable routing.DURABLE DESIGN: Constructed with 1/16 in (1.5 mm) thick SPCC commercial cold-rolled steel, the sturdy rack shelf ensures long term durability and supports a total weight of 200 lbs. (91 kg) making it the perfect rack shelf for any environment.MAXIMIZE VENTILATION: The vented shelf plate on the cantilever rack shelf helps to improve airflow to effectively dissipate heat away from your equipment.STARTECH.COM ADVANTAGE: IT professionals’ choice for over 30 years, this 2U vented server rack shelf is backed for life by StarTech.com, including free lifetime 24/5 multi-lingual technical assistance.The SHELF-2U-20-CENTER-V lets you add 2U 20 inches (50.8 cm) deep shelf to any 2-post EIA-310 compliant 19-inch rack.

The Aruba 19-inch Rack Mount Kit is designed for use with Aruba 9004 Gateway..19" rack mount kit.Compatible with Aruba 9004 series network gateway.Supports installation of two gateway units.Package contents: rack mount tray, eight M3 x 5 mm flat head screws, four M6 x 15 mm Phillips pan head screws, four rubber clamps, installation guide

1U Fixed Server Rack Mount Shelf - 16in Deep Steel Universal Cantilever Tray for 19" AV/Network Equipment Rack - 44lbs (CABSHELF116).DURABLE DESIGN: Heavy-duty cantilever shelf tray that is easy to install, constructed of durable 16 gauge SPCC commercial cold-rolled steel with support for weight up to 44 lbs. with lifetime warranty.FLEXIBLE INSTALLATION: The rackmount shelf can be mounted in multiple orientations to enable flexibility when it comes to install methods, w/lips available on one side to prevent equipment sliding off.INSTALLS IN ANY RACK BRAND: The shelf is fully compatible w/ the full array of StarTech.com server/network cabinets & enclosures (4POSTRACK12U, RK2236BKF) & other brands like: HP, APC, Dell & Lenovo.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support & has been the choice of IT professionals for 30 years, conducting thorough compatibility & performance testing on all products.UNIVERSAL COMPATIBILITY: 19" EIA/ECA-310 compliant 1U 16" deep server rack cabinet shelf for universal fit in any existing server/AV rack or cabinet & includes M6 Cage nuts & screws for mounting shelf.Cantilever Rack Shelf | EIA/ECA-310 Compliant | Lifetime Warranty

This 1U rack shelf lets you add 16 in. of flat storage space to any EIA-310 compliant server rack or cabinet. The shelf is vented to improve air flow and help lower temperatures in your rack. Ensure your equipment is secure: The durable fixed-rack shelf can hold up to 20 kg (44 lb.s. ) of equipment and is constructed using SPCC commercial-grade cold-rolled steel. Make the most of your available space: The 1U cantilever shelf lets you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space. It's perfect for your SOHO (small office, home office) environment, server room or any other location with limited space available. Customize your setup: You can install the 1U vented rack shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable or storing your tools. The CABSHELF1U7V is backed by a StarTech.com lifetime warranty and free lifetime technical support..Improve airflow in your cabinet or rack with a vented shelf.Ensure your equipment or tools are secure with heavy-duty steel construction.Save space in your office or server room by placing non-rackmount IT or AV equipment on your rack

2-Post Server Rack Shelf - Center Mount - 19 Inch -2U - Black - Supports up to 75 lb. (34 kg) - Vented (CABSHF2POSTV2).Fits most standard 19" 2 post racks.Mid-mount design.Supports up to 75 lb. (34 kg) of equipment.2 Post Network Rack shelf | Black | 75 lb. (34 kg)

Innovation® First sliding rack mount shelves include cable management arms and has high quality ball-bearing slide rails. Shelves are compatible with the industry standard 3/8" square hole racks and measures 17.7" x 28" in size..Compatibility: 4 post 19" rack, industry-standard 3/8" square hole racks, dell, HP-Compaq, IBM, APC, all standard round holes, all standard threads including 10-32, 12-24, and metric M6.Works in almost any 19" server rack or relay rack, slide mount servers, desktops and towers.Dimensions: 17.7"(W) x 28"(D).1U (H) x 19"(W) rack.Equipment anti-slide bars front and rear and anti-slip, high-quality ball-bearing slide rails.Includes cable management arms.Includes sliding rack mount shelves, cable management arm.Certifications and standards: EIA-310.Weight: 49.9 kg.Innovation® First sliding rack mount shelves works for almost any 19" server rack or relay rack and is compatible with all standard round non-threaded holes.

Innovation First Relay shelves can mount upside down and given durable powder coated black finish. Relay hole - hole spacing is 18" - 5/16" and provided with straps for slots..Capacity: 300 lbS..Compatibility: 19" EIA-310 racks.Dimensions: 17.6" (W) x 29.0" (D).Material: steel.Color: black.Form factor: 19".Innovation First Relay of 29" comes with flanges to increase load bearing capacity or prevent equipment movement.

1U Vented Server Rack Cabinet Shelf - Fixed 12" Deep Cantilever Rackmount Tray for 19" Data/AV/Network Enclosure w/Cage Nuts.19" compliant 1U 12" deep server rack cabinet shelf for a universal fit in any EIA/ECA-310 server/AV rack and includes mounting hardware.Vented rackmount cantilever tray improves airflow around devices on the shelf and within the rack.The durable shelf is easy to install and it's constructed of durable 16 AWG SPCC commercial cold-rolled steel for up to 55lb.For modems routers Wi-Fi access points and other IT/network/telco equipment that can't be mounted or to store tools/.Add a sturdy, 1U server rack shelf into almost any rack or cabinet

4U 19" Desktop Open Frame Rack - 2 Post Free-Standing Network Rack Switch Depth for Patch Panel/Data/AV/IT/Communication/Studio/Computer Equipment 66lb Capacity w/Cage Nuts/Screws (RK4OD).2-POST 4U DESKTOP OPEN FRAME RACK: Ideal for use on a workbench or in the back room of small office spaces without dedicated wiring closets; offers easy access to IT equipment like switches or routers.DESIGNED FOR EASY ACCESS: Small size & 4U height of the free standing network rack is ideal for testing environments where easy front & rear access to equipment & frequent device changes are required.EASY TO SHIP & SET UP: Quick and easy assembly combined w/5.4lb (2.5 kg) shipping weight makes the AV/studio switch depth rack ideal for remote sites; ships w/cage nuts & screws for mounting equipment.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support and has been the choice of IT professionals for 30 years, conducting thorough compatibility and performance testing on all our products.TECH SPECS: 4U Open Frame Rack| 19" Wide | 2 Post | EIA/ECA-310-E Compliant | U Heights Marked | 66.3lb (30 kg) Capacity | M5 Cage nuts & screws incl. | TAA Compliant.Free Standing Network Rack | EIA-310 | Weight Cap. 66 lbs. | Lifetime Warranty

Add a sturdy, 1U server rack shelf into almost any rack or cabinet. This 1U rack shelf lets you add 10 in. of flat storage space to any EIA-310 compliant server rack or cabinet. Ensure your equipment is secure: The durable fixed-rack shelf can hold up to 20 kg (44 lb.s. ) of equipment and is constructed using SPCC commercial-grade cold-rolled steel. Make the most of your available space: The 1U cantilever shelf lets you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space. It's perfect for your SOHO (small office, home office) environment, server room or any other location with limited space available. Customize your setup: You can install the 1U vented rack shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable or storing your tools. The CABSHELF1U10 is backed by a StarTech.com lifetime warranty and free lifetime technical support..Ensure your equipment or tools are secure with heavy-duty steel construction.Save space in your office or server room by placing non-rackmount IT or AV equipment on your rack.Hassle-free compatibility with EIA-310 compliance

1U Vented Server Rack Cabinet Shelf - Fixed 20" Deep Cantilever Rackmount Tray for 19" Data/AV/Network Enclosure w/Cage Nuts.19" compliant 1U 20" deep server rack cabinet shelf for a universal fit in any EIA/ECA-310 server/AV rack and includes mounting hardware.Vented rackmount cantilever tray improves airflow around devices on the shelf and within the rack.The durable shelf is easy to install and it's constructed of durable 16 AWG SPCC commercial cold-rolled steel for up to 55lbs.For modems routers Wi-Fi access points and other IT/network/telco equipment that can't be mounted or to store tools/supplies.Add a sturdy, 1U server rack shelf into almost any rack or cabinet

This StarTech 1U Universal fit mount shelf is designed to fit any 19" wide rack..19" 1U.Heavy duty steel construction.Supports a total weight of 33lbs/15kg.Mounting screws included.Mounting options Front mount (front only).Material Steel.Very compact form factor makes it ideal for any wall mount server rack, and even network switching racks.Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.Durable steel construction holds up to even the harshest industrial environments.Supply additional storage space for mission critical hardware and non-rack mount equipment.Rack unit 1U height.Includes 1U fixed rack shelf, 4 x M6 screws, 4 x M6 cage nuts.Certifications and standards CE, RoHs, UL.Warranty 3 years limited.Startech.Com® CABSHELF1U Universal Fixed Server Rack Cabinet Shelf has very compact form factor that makes it ideal for any wall-mount server rack, and even network switching racks.

1U Server Rack Cabinet Shelf - Fixed 12" Deep Cantilever Rackmount Tray for 19" Data/AV/Network Enclosure w/cage nuts, screws.1U 19" Server rack cabinet shelf 12" deep/ EIA/ECA-310 compliant for universal fit in any existing server/AV cabinet or enclosure/w/cage nuts and screws for mounting.The durable design cantilever tray is easy to install and with 2.0 mm SPCC commercial cold-rolled steel holding up to 55lb.For flexibility shelf mounts in multiple orientations w/lips on one side to prevent equipment sliding off.Compatible w/StarTech.com racks plus brands like HP APC Dell w/24 hr tech support.Add a sturdy, fixed shelf into almost any server rack or cabinet

The Tripp Lite SRSHELF2P1UTM Rack shelf in black, is a fixed shelf with 1U cantilever mount. This shelf made of cold-rolled steel supports up to 30 lbs load. The rack-mountable shelf is suitable for 4 post rack tool less mounting..Rack shelf.Dimensions: 1.8"H x 19"W x 12"D, 1U (rack height), 19"W (rack).Black cold-rolled steel.Compatible with 4 post rack tooless mounting.Load capacity: 30 lbs..Form factor: Rack-mountable.RoHS compliant.Weight: 3.5 lbs..Comes with 5 year limited warranty.Black rack shelf is designed for 4 post rack tool less mounting.

The Tripp Lite SmartRack expandable low-profile open-frame rack with 150 lbs. load capacity, secures and organizes 19U of 19" rack equipment up to 23.5" deep in locations with limited floor space. The pivoting, 2-post open-frame design provides convenient access for installing, configuring and servicing equipment and cabling from any direction. Heavy-duty steel with black powder-coated finish provides durability. It is suitable for setting up UPS systems, battery packs, network switches and patch panels in secure IT areas. The open-frame design helps to configure this rack to 8U, 12U or 22U to meet current needs. Rack comes with assembly and equipment-mounting hardware for easy installation..Rack height: 8U, 12U, 22U.Weight capacity: 150 lbs..Dimensions: 17.8" (8U), 24.8" (12U), 42.3" (22U)H x 20.11"W x 24"D.Device depth: 23.5".Perfect for installing UPS systems, battery packs, network switches and patch panels in secure IT areas with limited floor space.Expands to add equipment later without buying a bigger rack.Offers easy access for organizing, installing and servicing equipment and cabling.Heavy-duty steel construction with a black powder-coated finish offers added durability.Easy to assemble with included hardware.Vertical mounting rails with threaded 12-24 holes.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Contains 24 x 12-24 mounting screws, 16 x M5 button-head cap screws, eight M6 x 12 Phillips-head screws, two short vertical mounting rails.Meets EIA-310-D, IEC 60297-3-100, RoHS certifications and standards.Weight: 8U = 13.03 lbs., 12U = 14.04 lbs., 22U = 16.87 lbs..Comes with 5 years limited warranty

This adjustable rackmount shelving system supports 1U UPS systems as well as other 1U pieces of networking or power protection equipment. It offers a 4-post expandable mounting rails in the front to rear support for equipment with 17 1/2-inch wide rectangular chassis..Dimensions 1.72"(H) x 1.49"(W) x 20 1 2"(L).Weight capacity Up to 150 lbs..Silver.Maximum adjustable depth 36".Adjustable to any length between 20 1 2" and 36".Square hole rack attachment hardware included.Includes left rail pieces - a front and a rear, right rail pieces - a front and a rear, 10 - M6 screws, 10 - M6 washers, installation guide.Warranty 5 years limited.Tripp Lite SmartRack™ 4POSTRAILKit1U Rack Mount comes with rails that can be adjusted to any setting between 20.5" and 36".

This Rackmount.IT rack gives you the ability to mount your Cisco Meraki switch in a 19" rack. The rack is tailored specifically for the listed models to guarantee a perfect fit. The switch is placed on the rack with connections to the front, ensuring that the connections are easily accessible. Assembly will take about 5 minutes. Simply slide your Cisco Meraki device in the kit, place front panel on the front of the rack and fix the power supply..This rack gives you the ability to mount your Cisco Meraki switch in a 19" rack.Compatible with Cisco Meraki Go GS110-8/GS110-8P, MS120-8/MS120-8LP.Dimensions: 1.73"H x 18.98"W x 8.54"D.Color: Jet Black.Box contains: Cisco rack, assembly materials, installation guide.Number of connections brought to the front10.Assembly will take about 5 minutes. Simply slide your Cisco Meraki device in the kit, place front panel on the front of the rack and fix the power supply.