Fluke Visifault
4 results
When you're responsible for monitoring your company's network, the Fluke Networks VisiFault universal visual fault locator is a valuable accessory. The fault locator makes it easy to identify and trace fibers, so you can monitor problem areas and take action to stabilize the system. With its durable, sturdy case, the locator is designed to perform efficiently even after bumps and falls..Speeds fiber tracing and identification.Locates faults including tight bends, breaks and bad connectors.Accelerates end-to-end fiber checks.Easily verifies polarity and identifies fibers.Features continuous and flashing modes, ergonomic case survives drops, impacts and vibrations.Supports 2.5 mm and 1.25 mm SFF connectors.Over 80 hours of battery life with two AA batteries.Attaches with handy lanyard and carrying case.Survives drops, vibrations and impacts.Features continuous and flashing modes.Simplifies fiber polarity verification.Bright red visible laser light source, accelerates end-to-end fiber continuity checks.Weight: 5.7 oz.Dimensions: 6.2"(H) x 2"(W) x 1.13"(D).Fluke Networks VisiFault Universal Visual Fault Locator - Accelerated Fiber Checks
Multimode Fiber Verification Kit with Visifault - Includes Simplifiber Pro optical power meter, 850/1300 multimode source, Visifault VFL, FindFiber Remote ID source, Magnetic strap attachments, and carrying case; SC, ST, and LC power meter adapters also included.Multimode Fiber Verification Kit with Visifault.Networking Accessory.Part Number: FTK1200
The Fluke Networks™ Fiber QuickMap™ FQM-100-M-VFL distance and fault locator works on multimode fiber. It helps to locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber. It also detects live optical signals before it begins testing. The distance and fault locator in yellow/black color, operates with two AA alkaline batteries..Distance and fault locator helps to locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber.Dimensions: 6.9"H x 3.1"W x 1.5"D.Comes in yellow/black color.Battery: 2 AA alkaline batteries, 1500 tests life.Works on multimode fiber, 50/125 mu m and 62.5/125 mu-m 850 nm output wavelength, measure up to 4921'.Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber.Measure and locate high-loss splices, locate the end of a fiber.Find potential sources of high bit error rates caused by reflectance from dirty or poor connections.Detects live optical signals before it begins testing, quick set-up, connect your fiber and press the test button.Find problems quickly, 6 sec test time - no more blind troubleshooting that can waste hours.Change the Index of Refraction (IOR) to improve fiber length accuracy, visible in dark areas, backlighted display turns off automatically.Temperature: 0 to 50 deg C operating, -20 to 60 deg C non-operating, 75 - 95% operating relative humidity.Includes screw on interchangeable SC adapter, UPC-UPC 2 m patch cord, carrying case, guide, safety manual, batteries & VisiFault Visual fault locator.Certifications and standards: Meets RoHS, CE, FCC, CSA standards
The Fluke Networks® FTK1475 portable fiber verification kit includes implifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, three power meter adapters, reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs and USB interface cable. Kit helps to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults..Fiber verification kit has advanced time-saving features.Complete fiber verification kit is for contractors and network technicians.Use this kit to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults.Include: Simplifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, USB interface cable.Include: Three power meter adapters (SC, ST and LC), reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs
You May Also Like
Fluke Networks® MT-8200-60-KIT IntelliTone Pro 200 LAN toner and probe kit comes with IntelliTone 200 LAN toner and 200 probe and coax F connector adapter for reliable operation. Probe helps in detecting 1 KHz and digital signal from an analog toner. You can also isolate cables and wires that comes within a bundle. This toner and probe with IntelliTone digital toning technology helps in detecting faults and verifies continuity in just one-step. Whereas the toner and probe with SmartTone® analog toning technology isolates single pair of wires and helps in detecting or locating voice, audio or video. Kit includes 9-V batteries, two RJ11/RJ45 patch cables and test leads with alligator clips..IntelliTone Pro 200 LAN toner is suitable to detect faults and verifies continuity.Includes 1 alkaline battery with run time of 20 hours and provides 9 V of voltage for added convenience.Supports copper media for high speed transmission.Banana x 2, RJ-45 interfaces/ports for flexible connectivity.Cable termination, Ethernet link diagnostic, Tests for continuity, Toning tests, tools and measurements:.Requires operating temperature of 32 - 104 deg F, storage temperature of -4 - 140 deg F and 95 % relative humidity.Operates at altitude of 3000 m.Comes with tomer LED display,(8) LED indicators and Thumbwheel switch, volume control wheel.Contains IntelliTone 200 LAN toner and 200 Probe, coax F connector adapter, (2) RJ11 and (2) RJ45 patch cables.Fluke Networks® IntelliTone Pro 200 LAN toner and probe kit eliminates false signals and noise with its digital toning. Helps in locating cables on active networks.
VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can't penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate. Fiber QuickMap fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber.Battery Chemistry: Alkaline.Number of Batteries Supported: 2.Battery Size Supported: AA
MS2-FTK MicroScanner copper and fiber cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters. Test and verify your fiber connections with the SimpliFiber Pro power meter and light source..Network copper and fiber test kit measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.Dimensions: 1.4"H x 3"W x 6.4"D.Comes in black and yellow.Kit includes: MicroScanner cable verifier and SimpliFiber Pro (FTK1000) fiber test kit (SimpliFiber Pro optical power meter, 850/1300 multimode source, magnetic strap attachments, carrying case, and SC power-meter adapter).Test connectors: shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; MicroScanner2: F-connector for coaxial cable.Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.Features a monochrome LCD with backlight.MicroScanner solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices.MicroScanner PoE: solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco's Universal Power over Ethernet) compatible PoE devices.MicroScanner2 detects the advertised speed of 802.3 Ethernet ports with speeds of 10Mbps, 100Mbps, and 1Gbps.Verifies media services: 10/100/1000 Ethernet, POTS, and PoE.Tone generator produces 500kHz digital, 400kHz and 1kHz analog tones.Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe
Fluke Networks MS2-100 MicroScanner2 Cable verifier provides revolutionary change in voice, data and video cable without any technician error. Incorporated with RJ11, RJ45 and coax cable test ports that support virtually any type of low-voltage cable testing..MicroScanner2 cable verifier is suitable to verify voice/data/video cable and services.Measures 3"H x 6.4"W x 1.4".Includes 2 AA alkaline battery with run time of 20 hours.Supports twisted pair media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 % relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Length measurement of 11.81" - 1509.19'.Cable tone generator, rubber over mold enhances grip and increases ruggedness.Contains MicroScanner2 cable verifier with main wiremap adapter, multi-language getting started guide, user CD, batteries.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Cable verifier is capable of verifying voice/data/video cable and services with the help of a revolutionary user interface. Features strong housing.
The Fluke Networks network testing device will allow you to keep your network running smoothly. It will allow you to easily test twisted-pair cables and trace installed hidden cables. It uses an easy-to-read LED interface and a two-tone generator to let you know whether it detects any problems or defects..Display type: LED.Interfaces/Ports: 1 x RJ-45.Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.Easy-to-read fault display.Tone generator for tracing installed cables hidden in walls, floors and ceilings.Remote unit enables one-person testing of installed cables.Micromapper's built-in tone generator works with the IntelliTone™ pro probe or any other analog probe, allowing you to trace cable through walls, floors and ceilings.Micromapper also includes a remote unit that allows one person to test installed cabling or patch cords.MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs.Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.Generation of two tones for tracing cables and lication hidden cables.Includes: Micromapper and Micromapper remote, patch cable, 6 V alkaline battery and user guide.Weight: 0.28 lbs..Dimensions: 4.93"(H) x 2.05"(W) x 1.18"(D).1 year limited warranty.Fluke Networks Network Testing Device - Powerful and Reliable
The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC
Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.
The Fluke Networks™ FiberInspector™ FI-500 micro inspection scope has autofocus feature for stable images in few seconds. The large display helps to view singlemode and multimode fiber endfaces. It has built-in flashlight that illuminates dark areas and dense panels. The micro inspection scope in yellow/black color, has rechargeable NiMH battery..Micro inspection scope has autofocus feature for stable images in few seconds.Dimensions: 5.5"H x 3.2"W x 1.5"D display, 4.6"H x 2"W x 0.95"D probe.Comes in yellow/black color.Battery: Rechargeable NiMH, 2 x 1.2 V, 2700 mAh, 3 hrs of continuous probe use and 6 hrs of typical probe use battery life.Magnification: 1x, 2x, 4x display, 200x probe zoom function has 1x, 2x and 4x settings, camera type: 5 MP 0.25" CMOS sensor.Power adapter: 100 - 240 VAC +/- 10%, 50/60 Hz input, 6 VDC, 3 A maximum class II output.Input: USB 2.0 type A.PortBright a built-in flashlight illuminates dark areas and dense panels.Autofocus for stable images in few seconds.Large display to view singlemode and multimode fiber endfaces.Temperature: 0 to 50 deg C operating, -30 to 60 deg C storage without power adapter.Includes 4 tips (1.25mm, 2.5mm, SC, LC), case, rechargeable batteries and universal power adapter.Weight: 0.6 lbs.
The Fluke Networks® SimpliFiber® FTK1000 multimode fiber verification kit in yellow, includes pro optical power meter, 850/1300 multimode source, carrying case and SC power-meter adapter. The single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record. The CheckActive™ feature emits an audible tone and displays an icon when it detects a live fiber and the FindFiber™ remote id enables one individual to identify cable connections or routings especially useful at patch panels..Basic multimode fiber verification kit.Dimensions: 5.6"H x 3.2"W x 1.6"D.Comes in yellow color.Dual wavelength testing and tests multimode and singlemode fiber.Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter.Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source calibrated wavelengths in the power meter at 1490 nm and 1625 nm.Offers quick remote identification of cabling runs with find fiber remote IDs.Conduct pre testing and qualify cabling runs.Single port testing for simple network connection.Ruggedly built for demanding field use.Auto senses source wavelength.Operating temperature: 14 deg F to 122 deg F (-10 deg C to 50 deg C).Weight: 1.8 oz.
The Fluke Networks® SFPOWERMETER SimpliFiber Pro optical power meter has USB port for connectivity. It measures 6.4" x 3.2" x 1.5". The power meter has InGaAs detector and comes with SC adapter..Dimensions: 6.4"H x 3.2"W x 1.5"D.Interface/ports: USB, one SC port.Fiber wavelength: 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm, 850 nm.Battery chemistry: Alkaline.InGaAs detector, USB connectivity.Weight: 11.5 oz..Detector type: InGaAs, calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm.Wavelength accuracy: 850 nm: +/-30 nm, 1300 nm: +/- 20 nm, Spectral width (FWHM): 850 nm: 50 nm (typical), 1300 nm: 135 nm (typical).Power display units: dBm, mW, Micro W, Minimum output power: 850/1300 nm: -20 dBm, Power output stability: +/- 0.1 dB over 8 hours.Reference individually set for each wavelength.Single-port, simultaneous dual wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record.Additional 1490 and 1625 nm wavelengths extends product use to broader applications.Min/max capability automates precision tracking of intermittent power fluctuations.Large internal memory save 1000 results which enables continuous testing and recording.Includes simplifiber SFPOWERMETER pro optical power meter, SC adapter.Certifications and standards: EMI, RFI, EMC.Fluke Networks® SimpliFiber® Pro optical power meter has large internal memory that saves up to 1000 results which enables continuous testing and recording.
Fluke Networks OptiFiber Pro designed for enterprise, datacenter, outside olant and PON fiber. As fiber networks evolve, the need to test in more locations has increased. OTDRs are now needed for: FTTx, enterprise, OSP, PON, POLAN. Many OTDRs designed for fiber troubleshooting are designed for carrier and contain cumbersome and complicated features. The OptiFiber Pro OTDR family is the first class of OTDRs that is built with features and usability for both the enterprise network engineers, and cable installers working in both enterprise and OSP environments. Fluke Networks OptiFiber Pro OTDRs make novices and experts faster. Advanced features include Manual Expert mode, pinch and zoom for in-depth trace analysis and SmartLoop for bi-directional testing. Supports Versiv copper and fiber loss certification modules..The optical time domain reflectometer (OTDR) for testing fiber networks.Mainframe with module dimensions: 11"H x 5.25"W x 2.63"D.Comes in black and yellow.Kit includes: versiv 2 mainframe, OptiFiber Pro Quad OTDR module, shoulder strap, carry case, USB interface cable, versiv open source software CD, AC charger, two quick clean cleaners, two SC/LC multimode launch cables, two SC/LC singlemode launch cables, two OTDR source port interchangeable LC adapters, USB fiber inspection video probe with four tips, SC/SC simplex adaptor, two launch fiber hanging straps and magnets, integrated Wi-Fi, Statement of calibration and getting started guides..Multiple wavelengths (850, 1300, 1310,1490, 1550, and 1625nm) support LAN, datacenters, PON, FTTx, and outside plant applications.Automated setup senses fiber characteristics and sets measurement parameters.SmartLoop OTDR enables automated testing and analysis of two fibers in a single test, eliminating the need to travel to the far end of the connection to perform tests.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.Compatible with Linkware Live and enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare PC cable test management software.Test times in 2 seconds in Quick Test mode.Quickly test datacenter fiber with preprogrammed settings.Troubleshoot datacenter fiber links with short patch cables and many connectors because of ultrashort dead zones.Easily characterize all connectors, splices, and areas of high loss with graphical EventMap view.Pass/Fail certification of fiber optic connector endfaces.ProjX management system increases return on investment by enabling OTDR.Reduce network downtime by quickly and precisely identifying faults on all fiber types.Built-in Visual Fault Locator (VFL) easily identifies damaged fibers.Meets or exceeds ISO/TIA standards.Integrated Wi-Fi allows you to easily upload results to LinkWare Live
FTK2000 Network Accessory Kit.Networking Accessory.Part Number: FTK2000.Rigid hard shell is coated with scratch resistant finish for high quality durability
The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: D814 impact tool, electricians D Snips, cable stripper, Eversharp 66/110 cut blade, probe pic, carrying case.Fluke Networks Pro-Tool Kit - Six Tools in One Place
Fluke Networks® Compact Probe Pic with Cap, Yellow (44600000).Probe pic is perfect to check loose or damaged connections or to spread apart wires for direct access.Comes in yellow color and features high quality nylon construction for durability.Perfect for using the pic end for tracing or pulling wires from a bunch.Insulated tip protects against shorting adjacent components
The MicroScanner PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks. It performs continuity tests on all wires in a few seconds and displays the results graphically, so you can see opens, shorts, and crossed wires. The MicroScanner PoE helps make installation, maintenance, and troubleshooting on IT, security, PoE lighting, Ethernet-based HVAC devices, and IP-based building automation systems easier. Its oversized, backlit LCD screen displays clear results in any light or complete dark with intuitive icons and support of Class 0 to 8 PoE..PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks.Works on two AA alkaline batteries.Operating temperature: 32-113 degrees Fahrenheit.Reports PoE class (0-8), injector voltage, switch speed up to 10G.Shows wire map, length, cable ID, and distance to fault.Trace cable or wire pairs with the included IntelliTone Pro 200 probe.Includes Remote IDs to determine network layout quickly
The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC