Fully Managed Switches

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x gigabit SFP ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 125W of power, so you can power and connect your devices with a single wire.24Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

A network switch is a fundamental hardware device that serves as the central connection point for multiple devices within a local area network (LAN), such as computers, printers, wireless access points, and servers. It acts as an intelligent controller, enabling these connected devices to communicate with each other efficiently and share information. Unlike older networking devices like hubs, which simply broadcast all data to all ports, a switch uses packet switching technology. When a data packet arrives at one of its many ports, the switch examines the packet's destination Media Access Control (MAC) address and intelligently forwards it only to the specific port where the destination device is connected. This directed approach ensures efficient data transfer, boosts overall network performance, and makes effective use of available bandwidth by allowing simultaneous, full-duplex communication. Modern switches often incorporate Power over Ethernet (PoE) technology, which can deliver both data and electrical power over a single Ethernet cable. This capability is highly beneficial for deploying equipment like security cameras, VoIP phones, and IoT sensors in locations where separate power sources are impractical or unavailable. Switches are key building blocks in both small office/home networks and large, complex data centers, facilitating reliable and secure wired connectivity for a vast range of modern applications. Network administrators can manage and configure these devices to set up VLANs, prioritize traffic with Quality of Service (QoS), and implement security features like MAC filtering..The switch includes 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, offering enterprise-grade performance with full Layer 2 and Layer 3 management for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a total power budget of up to 820W, making it ideal for powering IP cameras, wireless access points, and VoIP phones.All 48 ports deliver Gigabit Ethernet connectivity, complemented by 10 Gigabit uplinks through SFP+ slots for high-speed data transfer across demanding applications.Designed as a 1RU rack-mountable switch.Supports SNMP v1, v2c, and v3 protocols, ensuring secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, optimizing traffic for voice, video, and data applications.Management options include Web GUI, CLI, Telnet, and SSH, along with security features such as RADIUS, TACACS+, SSL, and port-based MAC security for enhanced protection.Delivers a switching capacity of 176Gbps and supports operational modes like static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for safe and sustainable operation.5 Years Manufacturer's Warranty

23536d54ffebbb303c45b74406501462.Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters. Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four Aruba Instant On 1960 switches and manage as a single entity. The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks..High performance, smart-managed stackable switch designed for small and growing businesses, fast and easy set-up and security you can trust.This model has 48 x RJ45 10/100/1000, 2 x SFP+ 10GbE, 2 x 10GBASE-T ports.Use the Instant On mobile app, cloud-based web portal or the local web GU to quickly setup, monitor and manage the device.Throughput: 131 Mpps maximum; switching capacity: 176Gbps.Dimensions: 1.73"H x 17.42"W x 13.8"D.Power consumption at 100-127V: 110W maximum, 60W idle.Powered by single core ARMv7 Cortex-A9 800MHz CPU.Lifetime manufacturer limited warranty

The Grandstream GWN7832 is a high-performance Layer 3 aggregation switch designed for enterprise-grade deployments. Featuring 12 SFP+ 10G ports, it delivers up to 240Gbps switching capacity and 178.56Mpps forwarding rate, ideal for handling peak network loads. Advanced VLAN segmentation, IGMP/MLD Snooping, and built-in QoS ensure optimized traffic flow and performance. Robust security features—including ARP inspection, IP source guard, and DoS protection—safeguard your infrastructure. With support for IPv4/IPv6, stacking, and dual power redundancy, the GWN7832 offers scalable reliability. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it provides centralized control and simplified maintenance for modern business networks..Aggregates 12 SFP+ ports with Layer 3 managed switching for enterprise networks..Up to 240Gbps switching and 178.56Mpps forwarding rate..Mounts on desktop, wall, or rack with included kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via efficient PSU and surge protection..Complies with FCC, CE, RCM, IC, and UKCA standards.

d2d02946b158a8f055cb81e5358d3e7d.Built-in power supply to ensure all components are being supplied with accurate voltage.Supports layer 3 switching for enhanced performance and usability.Rack mounting enables you to organize wires & secure cables for professional installation.Managed switch provides a reliable foundation for your network.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Features 48 networking ports for connecting multiple peripherals, creating multiplayer gaming environments and establishing a connection to transfer large files instantly

The Grandstream GWN7813 is a high-performance Layer 3 managed network switch designed for medium-to-large enterprises seeking scalable, secure, and intelligent networking. Equipped with 24 Gigabit Ethernet ports and 4 10G SFP+ uplink ports, it delivers a total switching capacity of 128Gbps and non-blocking throughput of 64Gbps. Advanced features include dynamic routing (RIP, OSPF, BGP), 4K VLAN support, IGMP/MLD snooping, and comprehensive QoS for traffic prioritization. Security is reinforced with ARP inspection, IP source guard, DoS protection, port isolation, and MAC authentication. The GWN7813 supports stacking of up to 4 devices and integrates seamlessly with Grandstream’s GDMS Networking and GWN Manager platforms for centralized cloud or on-premise management. With PoE++ support on ports 1–8, it powers IP phones, cameras, and access points efficiently. Designed for desktop, wall, or rack mounting, and backed by enterprise-grade reliability, the GWN7813 is ideal for building robust business networks..Features 24 Gigabit ports and 4 10G SFP+ uplinks in a managed Layer 3 switch.Powers PoE/PoE++ devices with smart dynamic allocation on ports 1–8.Delivers 128Gbps switching capacity and 64Gbps non-blocking throughput.Mounts easily on desktop, wall, or rack with included hardware.Supports SNMP v1, v2c, and v3 for remote monitoring and diagnostics.Prioritizes traffic using advanced QoS with multiple queue scheduling modes.Secures networks with 802.1X, MAC auth, DoS protection, and DHCP snooping.Enables dynamic routing with RIP, OSPF, BGP, and policy-based controls.Reduces power use with energy-efficient Ethernet and fan/power monitoring.Complies with FCC, CE, RCM, IC, and UKCA certifications for global deployment

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 10.1 x 1.7".Power Consumption: 195 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters. With PoE models, up to 30W PoE power delivery is available for Class 4 PoE devices like access points, surveillance cameras and VoIP phones, and up to 60W PoE power delivery is available for Class 6 PoE devices like pan-tilt zoom cameras and video-enabled IP-phones. Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four Aruba Instant On 1960 switches and manage as a single entity. The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks..High performance, smart-managed stackable switch designed for small and growing businesses, fast and easy set-up and security you can trust.This model has 48 x RJ45 10/100/1000 PoE (CL4 and CL6), 2 x SFP+ 10GbE, 2 x 10GBASE-T ports.Use the Instant On mobile app, cloud-based web portal or the local web GU to quickly setup, monitor and manage the device.Throughput: 131 Mpps maximum; switching capacity: 176Gbps.Dimensions: 1.73"H x 17.42"W x 15.86"D.Power consumption at 100-127V: 790W maximum, 60W idle, total 600W PoE power.Powered by single core ARMv7 Cortex-A9 800MHz CPU.Lifetime manufacturer limited warranty

The Aruba Instant On 1930 switches features advanced, smart-managed, fixed- configuration Gigabit switches designed for small businesses that are easy-to-deploy and affordable. They're made to handle today's bandwidth-heavy applications like voice and video conferencing, enabling consistent connectivity to enhance performance. Using either the Instant On mobile app or the cloud-based web portal, you can quickly set up, monitor and manage the 1930 switch series from anywhere at any time. What's more, up to 30 W PoE power delivery is available out-of-the-box for your class 4 PoE devices, like access points, surveillance cameras and VoIP phones, all easily managed from the same platform. Built-in security features protect your network from unauthorized access by allowing you to segment traffic and define access to each area of the network. And all of this is included in the price of the hardware there are no hidden subscription or licensing fees..Gigabit Ethernet managed switch features 48 RJ-45 autosensing 10/100/1000 Class 4 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T), 4 SFP+ 1/10GbE ports.PoE to power APs and IoT devices such as IP phones, surveillance cameras, and door locks.Switching capacity: up to 176Gbps.Comes in a rack-mountable design.Facilitates remote management with SNMPv1/v2c/v3 management station that discovers and monitors the switch.Quality of service features include: traffic prioritization, IEEE 802.1p/Q VLAN tagging, Class of Service (CoS), and Advanced Classifier Based QoS.Supports a choice of management interfaces: Cloud-Based management for entire network, Simple Local Web GUI management, firmware update, default DHCP client mode, port mirroring, event logging and alerts, account management, locator LED, and schedule configuration.Throughput capacity: up to 130.95Mpps.Plug-and-play switches that work together with Instant On APs right out of the box.Mobile app to easily set up, monitor, and manage your network.Security controls let you define access in each area of your network, keeping your business data safe.Lifetime manufacturer limited warranty

Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters. With PoE models, up to 30W PoE power delivery is available for Class 4 PoE devices like access points, surveillance cameras and VoIP phones, and up to 60W PoE power delivery is available for Class 6 PoE devices like pan-tilt zoom cameras and video-enabled IP-phones. Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four Aruba Instant On 1960 switches and manage as a single entity. The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks..High performance, smart-managed stackable switch designed for small and growing businesses, fast and easy set-up and security you can trust.This model has 24 x RJ45 10/100/1000 PoE (CL4 and CL6), 2 x SFP+ 10GbE, 2 x 10GBASE-T ports.Use the Instant On mobile app, cloud-based web portal or the local web GU to quickly setup, monitor and manage the device.Throughput: 95 Mpps maximum; switching capacity: 128Gbps.Dimensions: 1.73"H x 17.42"W x 13.8"D.Power consumption at 100-127V: 500W maximum, 40W idle, total 370W PoE power.Powered by single core ARMv7 Cortex-A9 800MHz CPU.Lifetime manufacturer limited warranty

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1G/10G SFP+ and 4 x 1/10/25/50G SFP ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 654Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 85W with JL085A PSU; switching capacity: 880Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches perfect for enterprise network access, aggregation, core and data center top of rack (ToR) deployments. Created for game- changing operational efficiency with built-in security and resiliency, the 6300 switches provide the foundation for high-performance networks supporting IoT, mobile and cloud applications. Built from the ground up with a combination of cutting-edge hardware, software and analytics and automation tools, the stackable 6300 switches are part of the Aruba CX switching portfolio, designed for today's enterprise campus, branch and data center networks. By combining a modern, fully programmable OS with the Aruba Network Analytics Engine, the 6300 switches provide industry leading monitoring and troubleshooting capabilities for the access layer. A powerful Aruba Gen7 ASIC architecture delivers performance and robust feature support with flexible programmability for tomorrow's applications. The Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1GbE/10GbE/25GbE uplinks. HPE Smart Rate multi-gigabit Ethernet paves the way for high speed access points and IoT devices. Aruba Dynamic Segmentation extends Aruba's foundational wireless role-based policy capability to Aruba wired switches. What this means is that the same security, user experience and simplified IT management can be enjoyed throughout the network. Regardless of how users and IoT devices connect, consistent policies are enforced across wired and wireless networks, keeping traffic secure and separate..Modern, flexible, and intelligent AOS-CX stackable switch perfect for enterprise access, aggregation, and ToR data center deployments.This model has 48 x 10/100/1000 BASE-T ports and 4 x 1/10/25G SFP ports.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN.Throughput: 369 Mpps maximum; switching capacity: 496Gbps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Power consumption: hibernation (0 rpm fan): 9W, idle: 56W, 100% traffic rate: 75W.Certifications and standards: Meets or exceeds the UL 60950-1 2nd Ed, FCC part 15 Class A standards.Powered by quad-core ARM Cortex A72 1.8GHz, 8GB DDR4, 32GB eMMC, and 8MB packet buffer memory.Equipped with 1 x USB Type-C console port, 1 x OOBM, 1 x USB Type-A host port, 1 x Bluetooth dongle to be used with CX mobile app.Lifetime manufacturer limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations..Layer 3 managed switch with 24 x Gigabit Ethernet ports.1/10/1000 Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v1, v2c, v3 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials.Powered by PWR-C6-125WAC power supply.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy solutions.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Cisco IOS XE common licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry.Cloud monitoring for Catalyst on Meraki dashboard function.Lifetime manufacturer limited warranty

The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches perfect for enterprise network access, aggregation, core and data center top of rack (ToR) deployments. Created for game- changing operational efficiency with built-in security and resiliency, the 6300 switches provide the foundation for high-performance networks supporting IoT, mobile and cloud applications. Built from the ground up with a combination of cutting-edge hardware, software and analytics and automation tools, the stackable 6300 switches are part of the Aruba CX switching portfolio, designed for today's enterprise campus, branch and data center networks. By combining a modern, fully programmable OS with the Aruba Network Analytics Engine, the 6300 switches provide industry leading monitoring and troubleshooting capabilities for the access layer. A powerful Aruba Gen7 ASIC architecture delivers performance and robust feature support with flexible programmability for tomorrow's applications. The Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1GbE/10GbE/25GbE uplinks and supports high density IEEE 802.3bt high power PoE. HPE Smart Rate multi-gigabit Ethernet paves the way for high speed access points and IoT devices by delivering fast connectivity and high power PoE using existing cabling. Aruba Dynamic Segmentation extends Aruba's foundational wireless role-based policy capability to Aruba wired switches. What this means is that the same security, user experience and simplified IT management can be enjoyed throughout the network. Regardless of how users and IoT devices connect, consistent policies are enforced across wired and wireless networks, keeping traffic secure and separate..Modern, flexible and intelligent AOS-CX stackable switch perfect for enterprise access, aggregation and ToR data center deployments.This model has 24 x 10/100/1000 BASE-T PoE+ ports supporting up to 30W per port and 4 x 1/10/25G SFP ports.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN.Throughput: 334 Mpps maximum; switching capacity: 448Gbps.Dimensions: 1.73"H x 17.4"W x 12.9"D.Power consumption: hibernation (0 rpm fan): 12W, idle: 52W, 100% traffic rate: 67W.Powered by quad core ARM Cortex A72 1.8GHz, 8 GBytes DDR4, 32 GBytes eMMC, and 8 MB Shared Packet Buffer Memory.Lifetime manufacturer limited warranty

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 48 x 10/100/1000BASE-T PoE+ and 4 x 1/10/25/50G SFP ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 369Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 88-96W with JL086A, JL087A, JL670A PSU; switching capacity: 496Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.PoE+ ports supporting up to 30W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Ubiquiti UniFi switch Pro is a fully managed Layer 3 switch with 48 Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi switch Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi switch Pro is perfect aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed switch features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.Contains 48 10/100/1000 RJ45 ports and four 1/10G SFP+ Ethernet ports Ethernet In-Band.UniFi Controller allows configuring: operation mode (switching, mirroring, or aggregate) per port, network/VLAN configuration, jumbo frame and flow control services, network settings, etc..Dimensions: 1.72"H x 17.42"W x 11.24"D.Maximum power consumption: 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Passive cooling design allows the switch to be located in any workspace.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Offers Layer 3 capabilities, such as inter-VLAN routing, static routing, and DHCP server functionality.Features the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.OS support: Linux, Mac OS X, or Microsoft Windows 7/8/10.Pack includes: switch, two rack-mount brackets, eight bracket screws, four mounting screws, four cage nuts, power cord, four rubber feet.2-year manufacturer limited warranty

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP.No. & Type of Ports: 52-Port.System Management: Managed.Rack-Mountable Design.Dimensions (H x W x D): 1.7 x 17.3 x 10.1".Power Consumption: 382 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable.Limited Lifetime Warranty.The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP+.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 470.00 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

The Lantronix Transition Networks SM24TAT4XB-EU is a high-performance managed Gigabit Ethernet PoE+ switch designed to meet the demands of enterprise and smart infrastructure environments. Featuring 24 Gigabit RJ-45 ports and 4 dual-speed 1G/10G SFP+ uplink slots, this switch delivers lightning-fast connectivity and exceptional scalability for growing networks. With a 128Gbps switching capacity, it ensures smooth data flow even under heavy loads, making it ideal for IP surveillance, VoIP, and high-bandwidth applications. This switch supports IEEE 802.3at PoE+ and 802.3af PoE, providing up to 370W PoE budget to power cameras, access points, and other devices without additional adapters. Advanced Layer 3 features, VLAN support, QoS, and robust security protocols (SSH/SSL, RADIUS, TACACS+) guarantee secure and efficient network management. The integrated Device Management System (DMS) offers intuitive graphical monitoring, traffic analysis, and troubleshooting tools for simplified administration. Built for reliability, the SM24TAT4XB-EU operates within a wide temperature range and complies with UL, CE, and IEC62368 safety standards. Backed by a 5-Year manufacturer's warranty, this switch is the perfect solution for businesses seeking performance, flexibility, and long-term value..This managed Layer 3 switch features 24 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ slots, delivering enterprise-grade performance with advanced management capabilities via Web GUI, CLI, Telnet, and SNMP v1/v2c/v3.Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ standards with a PoE budget of up to 370W, ensuring reliable power delivery for IP cameras, VoIP phones, and wireless access points.Offers a 128Gbps switching capacity for high-speed data transfer and efficient network performance.Designed in a rack-mountable 1U form factor.Supports SNMP v1/v2c/v3 for comprehensive network monitoring and management, along with LLDP for device discovery.Provides advanced QoS with 8 hardware queues, strict priority, and weighted round-robin scheduling for optimized traffic handling.Features robust security including RADIUS, IEEE 802.1X authentication, TACACS+, SSH/SSL encryption, and ACLs for granular access control.Supports IPv4/IPv6 Layer 3 static routing, link aggregation (LACP), VLAN tagging, IGMP snooping, and spanning tree protocols.Consumes 44W maximum without PoE and up to 450W at full PoE load, with IEEE 802.3az Energy-Efficient Ethernet.Complies with environmental standards including RoHS, REACH, and WEEE, ensuring safety and sustainability.5 Years Manufacturer's Warranty

The HPE Aruba Networking CX 6200 switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application, and security related issues easily through the use of Python agents and REST APIs..Layer 3 managed switch with 24 x Gigabit Ethernet and 4 x 1/10G SFP ports.128Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management.Power consumption: 59W.Meets or exceeds the 80plus Silver, EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 + A2:2013, EN 62368-1:2014 +A11:2017, CAN/CSA-C22.2 No. 60950-1-07, IEC 60950-1:2005, IEC 62368-1:2014 2nd Ed., and CNS-14336-1 standards.Managed switch delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster.Switch uses a fully distributed architecture with Aruba Gen7 ASICs that delivers very low latency, increased packet buffering, and adaptive power consumption; all switching and routing are wire-speed to meet the demands of bandwidth-intensive applications.Supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures.Enterprise-class connectivity with support for ACLs, robust QoS, and common protocols such as static and Access OSPF routing.Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.Flexible, modular switch models support hot-swappable, redundant power supplies and fans for enhanced resiliency

79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 18 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters. Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four Aruba Instant On 1960 switches and manage as a single entity. The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks..High performance, smart-managed stackable switch designed for small and growing businesses, fast and easy set-up and security you can trust.This model has 24 x RJ45 10/100/1000, 2 x SFP+ 10GbE, 2 x 10GBASE-T ports.Use the Instant On mobile app, cloud-based web portal or the local web GU to quickly setup, monitor and manage the device.Throughput: 95 Mpps maximum; switching capacity: 128Gbps.Dimensions: 1.73"H x 17.42"W x 13.8"D.Power consumption at 100-127V: 60W maximum, 30W idle.Powered by single core ARMv7 Cortex-A9 800MHz CPU.Lifetime manufacturer limited warranty

The HPE Aruba Networking CX 6200F Switch is perfect for SMB networks, enterprise branch offices and campuses. Created for groundbreaking operational efficiency with built-in automation and analytics, it offers an access layer solution that’s secure and simple. This stackable switch is built with a combination of cutting-edge hardware, analytics, software and automation tools. By combining the Aruba Network Analytics Engine with a fully programmable OS, it brings to the access layer supreme troubleshooting and monitoring capabilities..Features 48 Gigabit Ethernet ports, Gigabit Ethernet performance class, and is a fully managed switch.Supports PoE with a 740W power supply, delivering up to 60W per port across 48 Gigabit Ethernet ports.Data transfer rates of up to 1 Gbps per Ethernet port and 10 Gbps through its SFP+ uplink ports.Rack-mountable form factor and supports virtual stacking for scalable deployments.SNMP v1, v2, and v3 for secure and scalable network monitoring and management.Quality of Service (QoS) features for prioritizing network traffic and ensuring optimal performance.Offers system management with security features like role-based access, ACLs, and centralized monitoring.Delivers high throughput with support for full-duplex, jumbo frames, and operates in Layer 2 and Layer 3 modes.Consumes up to 740W with energy-saving features like port shutdown and dynamic power control.Comes in gray color for better adaption to the space

Ubiquiti UniFi configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1 Gigabit links to your devices and fiber uplink options to your enterprise network. It features a 1.3" touch LCM, a nd a fanless design. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Network Controller a nd mobile app, the UniFi switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1Gbps links to your devices and fiber uplink options to your enterprise network.48 gigabit ports provide a 52Gbps switching capacity.Rack-mountable for convenient use.Works with the UniFi Network Application.Meets or exceeds CE, FCC, IC standards.Features a 1.3" LCM color touch screen with AR switch management

The Aruba JL319A 2930M 24-port Gigabit Ethernet switch in black, features 12.38MB, 4.5MB ingress/7.875MB egress packet buffer, 4GB eMMC and 1GB of DDR3 SDRAM memory. It has 20 x autosensing 10/100/1000 ports and 4 x combo 10/100/1000BASE-T or 100/1000 Mbps SFP ports. This switch has maximum throughput of 95.2 Mbps..Gigabit Ethernet switch provides faster throughput.Ports: (20) autosensing 10/100/1000 ports, (4) combo 10/100/1000Base-T or 100/1000 Mbps SFP ports.Allows you for Aruba central, web browser, SNMP manager and RMON1 management.Throughput: 95.2 Mpps.Dimensions: 1.73"H x 17.42"W x 12.7"D.Certifications and standards: Meets UL 60950-1, 2nd Edition, CSA 22.2 No. 60950-1-07 2nd, VCCI Class A, CNS 13438 standards.Comes in black color.Packet buffer: 12.38MB, 4.5MB ingress/7.875MB egress, memory: 4GB eMMC, 1GB DDR3 SDRAM, processor: ARM Cortex A9 dual core at 1016 MHz.Features PoE, half or full duplex and (1) uplink slot.Weight: 9.81 lbs..Comes with limited lifetime warranty

Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four Aruba Instant On 1960 switches and manage as a single entity. The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks..Advanced 10G, smart-managed stackable switch designed for business networks and workgroups needing ultra-high performance..This model has 12 x RJ45 100/1000/10GBASE-T, 4 x SFP+ 10GbE ports.Use the Instant On mobile app, cloud-based web portal or the local web GU to quickly setup, monitor and manage the device.Throughput: 238 Mpps maximum; switching capacity: 320Gbps.Dimensions: 1.73"H x 17.42"W x 13.8"D.Power consumption at 100-127V: 130W maximum, 60W idle.Powered by single core ARMv7 Cortex-A9 2Ghz CPU.Lifetime manufacturer limited warranty

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources..Type of Ethernet Switch: Managed Switch with SFP.No. & Type of Ports: 52-Port.System Management: Managed.Rack-Mountable Design.Dimensions (H x W x D): 1.7 x 17.3 x 10.1".Power Consumption: 36.5 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable.Limited Lifetime Warranty.The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks.

The EX4100-F-12P, which is a compact, fanless switch offering 12 x 1GbE Power over Ethernet Plus (PoE+) access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter. EX4100-F-12P can also be powered from an external 90W power sourcing equipment (PSE) device connected via the uplink port. Additional 90W of PoE budget is available if the second uplink port is connected to a PSE device. With external power adapter and the two uplink ports connected to 90W external PSE, total PoE power budget supported is up to 300W..Managed switch with 12 x 10/100/1000BASE-T PoE+, 2 x 100Mb/1GbE/2.5GbE/5GbE/10GbE uplinks, 4 x 10GbE stacking/uplink ports, with Standard SW ports.The EX4100-F-12P fanless switch offering 12 x 1GbE PoE+ access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter.Features 256Gbps switching capacity.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Meets or exceeds the CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, and TAA standards.Onboard (day 0), provision (day 1), and manage (day 2+) the EX4100-F from the cloud with Juniper Mist Wired Assurance, using AI-driven automation and insights to deliver improved experiences for IT staff, end users, and connected devices.Streamline IT operations, reduce mean time to repair, and deliver a new generation of wired and wireless networks; the EX4100-F provides rich streaming telemetry data for insights into switch health and wired service-level expectations (SLEs) for pre- and post-connection metrics.Scale with ease, build resiliency, and streamline management with Virtual Chassis and EVPN-VXLAN-based campus fabrics, which help to simplify configuring and maintaining multiple devices.Standards-based micro segmentation using group-based policies (GBP) leverages underlying VXLAN technology to provide agnostic endpoint access control for consistent security policies and granular control of application, business function, or user tags.Take segmentation to the next level by separating traffic within the same VLAN so IoT devices or users can traverse any port or switch within the network; maintain the same security policies without having to manually configure them each time.Enables per-flow level analytics, so you can monitor thousands of traffic flows per switch without impacting the CPU.Dimensions: 1.75"H x 10.59"W x 9.66"D.Lifetime manufacturer limited warranty

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP+.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 248.7 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE+ Compliant Managed Network Switch with SFP+.No. & Type of Ports: 48-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 10.1 x 1.7".Power Consumption: 382 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Cisco Catalyst IE3300 Rugged Series switches deliver high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Rugged switch delivers Gigabit Ethernet connectivity in a compact form factor, and designed for a wide range of industrial applications where hardened products are required.Eight 10/100/1000 RJ45 Ethernet PoE+ and two 100/1000 SFP ports.Managed with powerful tools such as Cisco DNA Center and Cisco Industrial Network Director, and can be easily set up with a completely redesigned user-friendly modern GUI tool called WebUI.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 32W.Built for harsh environments and temperature ranges (-40 to 167 degrees Fahrenheit).Hardened for vibration, shock and surge, and electrical noise immunity.Complies with multi-industry specifications for automation, ITS, and substation environments.Covers a wide range of Power over Ethernet (PoE) (up to IEEE 802.3bt type 4) application requirements.Alarm I/O for monitoring and signaling to external equipment.High-density industrial Power over Ethernet (PoE) enables ready-to-use PoE devices, such as IP phones, cameras, and wireless access points.User-friendly GUI (called WebUI) allows for easy configuration and monitoring.SwapDrive for true zero-configuration and simple switch replacement in the event of a failure.Full Flexible NetFlow Enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection.5-year manufacturer limited warranty

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE-Compliant Managed Network Switch with SFP.No. & Type of Ports: 16-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 7.9 x 1.7".Power Consumption: 130 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

The Aruba 2930M Switch Series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 network switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave and cloud-based Aruba Central. A powerful Aruba ProVision ASIC delivers performance, robust feature support, and value with flexible programmability for the latest applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The flexible 2930M supports wire speed 10GbE and 40GbE uplinks, redundant dual modular power supplies for up to 1440 Watts of PoE, and new models with industry standard IEEE 802.3bt Class 6 that provide up to 60W of PoE per port. HPE Smart Rate multi-gigabit Ethernet models paves the way for high speed APs and IoT devices by delivering fast connectivity and PoE power using existing campus cabling. The feature rich 2930M supports a robust QoS, RIP, Access OSPF routing, PIM, VRRP, IPv6 and Dynamic Segmentation for unified and secure access. The Aruba 2930M Switch Series provides a simple and powerful access layer solution that can be quickly set up at branch offices with little or no IT support using Zero Touch Deployment. The switches include a lifetime manufacturer limited warranty..Switch designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach.44 autosensing 10/100/1000 ports, dual personality (RJ-45 or USB Micro-B) serial console port, USB-A port, 100BASE-T Out of Band management port.Dimensions: 1.73"H x 17.42"W x 12.77"D.Rack-mountable.Lifetime manufacturer limited warranty.Power: 200 - 240 VAC, 1350 W (typical), 1650 W (maximum).Memory: 1GB DDR3 SDRAM, 4GB flash.Processor: 1.016 GHz ARM Cortex-A9.Capacity: 2000 IPv4 routing table entries, 1000 IPv6 routing table entries, 10000 RIP routes, 256 static routes.Jumbo frame support: 9220 bytes, MAC address table size: 32768 entries, Remote management: CLI, HTTP, RMON 1, SNMP, SNMP 1, 2 , 2c , 3, SSH, SSH-2.Network: L3 advanced switching, Routing protocol: CIDR, ECMP, IGMP, IGMPv2, IGMPv3, OSPFv3, RIP, RIPng, Static IPv4 and IPv6 routing.Form factor: Rack mountable, features ACL, ARP, BOOTP, DCBX support, IRDP, LACP, MSTP, MVRP, NDP, UDLD, VLAN, VXLAN, ToS.Temperature: 0 to 55 deg C operating, -40 to 158 deg F storage, Humidity: 15 - 95 % non-condensing.Meets 80 PLUS Silver, CISPR, EN, CNS/CSA, FCC, ICES, IEC, VCCI certifications and standards.Weight: 10.25 lbs..Comes with limited lifetime warranty.Managed Ethernet switch features high performance Layer 3 access switches and optimized for innovative SDN applications with openflow.

The Aruba 2930F switch series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. This convenient Layer 3 network switch includes built-in uplinks and PoE power and is simple to deploy and manage with advanced security and network management tools like Aruba ClearPass policy manager, Aruba AirWave, and cloud-based Aruba Central. This switch provides a convenient and cost-effective access switch solution that can be quickly set up with zero touch provisioning. The robust Layer 3 feature set includes a limited lifetime warranty..Fanless 12-port Gigabit Ethernet managed switch provides performance and ease of use for enterprise campuses, SMBs, and branch offices.Features 12 x RJ45 auto-sensing 10/100/1000 PoE+ ports, 2 x RJ45 auto-sensing 10/100/1000 ports, 2 x SFP+ 1/10GbE ports, and a dual-personality RJ45 serial console port.Switching capacity: 68Gbps.Comes in a 1U rack-mountable design.Power rating: 170W (maximum), 20W (idle).Supports advanced security and network management via Aruba ClearPass policy manager, Aruba AirWave, and Aruba Central.Throughput: up to 41.7Mpps.Maximum power consumption: 170 W (139W PoE+ power).Meets or exceeds the DoE VI, UL/CUL, and FCC CFR 47 Part 15 Class A standards.MAC address table size: 32768 entries.Packet buffer size: 12.38MB.Features a dual-core ARM Cortex A9 1016MHz CPU, 1GB DDR3 SDRAM, and 4GB eMMC memory.Lifetime manufacturer limited warranty

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP+.No. & Type of Ports: 48-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 10.1 x 1.7".Power Consumption: 41.2 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE Compliant Managed Network.No. & Type of Ports: 8-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 151.4 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP+.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 23.6 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

The Aruba CX 6200 Switch Series is a next-gen family of stackable access switches ideal for enterprise branch offices, campuses, and SMB networks. Created for game-changing operational efficiency with built-in analytics and automation, the CX 6200 switches provide an enterprise-class access layer solution that's simple and secure. Built from the ground up with a combination of cutting edge hardware, software and analytics and automation tools, the stackable CX 6200 switches are part of the Aruba CX switching portfolio. By combining a modern, fully programmable OS with the Aruba Network Analytics Engine, the CX 6200 brings industry leading monitoring and troubleshooting capabilities to the access layer..Features 48 Gigabit Ethernet ports, Gigabit Ethernet performance class, and is a fully managed switch.Supports PoE with a 370W budget across 48 ports for powering network devices..Data transfer rates of up to 1 Gbps per Ethernet port and 10 Gbps through its SFP+ uplink ports.Rack-mountable form factor and supports virtual stacking for scalable deployments.SNMP v1, v2, and v3 for secure and scalable network monitoring and management.Quality of Service (QoS) features for prioritizing network traffic and ensuring optimal performance.Offers system management with security features like role-based access, ACLs, and centralized monitoring.Up to 176 Gbps switching capacity and supports Layer 3 operational mode for advanced network management.Consumes up to 370W with energy-saving features like port shutdown and dynamic power control.Limited Lifetime Warranty

Cisco Catalyst IE3300 Rugged Series switches deliver high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Rugged Gigabit Ethernet switch for a wide range of industrial applications where hardened products are required.This model has 8 x 10/100/1000 RJ45 copper ports, 2 x 100/1000 SFP uplinks, and expandable to up to 26 ports of GE by attaching one of eight compatible modules.Can be managed with powerful management tools such as Cisco DNA Center and Cisco Industrial Network Director, and a completely redesigned user-friendly modern GUI tool called WebUI.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 23W.Built for harsh environments and temperature ranges (-40 degrees Fahrenheit to 167 degrees Fahrenheit).Fanless, convection-cooled with no moving parts for extended durability.Hardened for vibration, shock and surge, and electrical noise immunity.Complies with multi-industry specifications for automation, ITS, and substation environments.Improves uptime, performance, and safety of industrial systems and equipment.Alarm I/O for monitoring and signaling to external equipment.Enables ultrahigh definition (UHD), PTZ IP cameras, programmable logic controllers (PLC) and Wi-Fi 6 access points.Delivers multiple rings and redundant ring topologies for new network configurations.Extends geographical scalability where longer-distance connectivity is required.SwapDrive for zero-configuration replacement.Full Flexible NetFlow (FNF) provides enhanced flow and threat visibility.IPv6 Ready Logo certified.Comes with Network Essentials perpetual license.5-year manufacturer limited warranty

The Grandstream GWN7816P is a high-performance Layer 3 managed switch built for enterprise-grade networks requiring robust PoE capabilities. Featuring 48 Gigabit Ethernet ports and 6 10G SFP+ uplinks, it delivers up to 216Gbps switching capacity and 160.704Mpps forwarding rate for seamless data throughput. With support for IEEE 802.3af/at/bt standards, it offers dynamic PoE/PoE+/PoE++ allocation per port, delivering up to 740W total output—ideal for powering IP cameras, phones, and access points. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your infrastructure, while built-in QoS and ACL filtering ensure optimized traffic control. The GWN7816P supports stacking, dual boot redundancy, and intelligent fan control for enhanced reliability and energy efficiency. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it offers flexible deployment and simplified maintenance for modern business environments..48 Gigabit ports with Layer 3 managed switching for enterprise-grade performance..Supports PoE/PoE+/PoE++ with up to 740W total output across all 48 ports..Mounts on desktop or rail with included front and rear rack kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via EEE ports and smart fan speed control..Complies with FCC, CE, RCM, IC, and UKCA standards for global deployment.

Ubiquiti UniFi Pro is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 16 802.3at (PoE+) Gigabit Ethernet ports. Two 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution it combines up to 400W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 16 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 16 Gigabit RJ45 802.3at PoE+ ports, two 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 11.24"D.Max. power consumption (excluding PoE output): 50W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting

Elevate your business network with the high-performance Lantronix SM48TAT4XA-RP, a versatile managed switch engineered for demanding environments. This robust solution offers an exceptional blend of speed, flexibility, and intelligent power delivery, making it the ideal backbone for modern IT infrastructures. Featuring an impressive 48 Gigabit Ethernet ports (10/100/1000Base-T) with PoE+ capabilities, the SM48TAT4XA-RP simplifies deployment for a wide array of devices, including IP cameras, wireless access points, and VoIP phones, all through a single cable. The substantial power budget (up to 1640 W with dual power supplies) ensures seamless operation across your entire connected ecosystem. Future-proof your network with four dual-speed 1G/10G SFP+ slots for high-speed fiber uplinks, providing scalable bandwidth to meet your evolving needs. Advanced management and security features, including robust authentication (RADIUS, TACACS+), flexible VLAN configurations, and SSH/SSL support, ensure network stability and data integrity are prioritized. Designed for efficiency and reliability, this rack-mountable switch is an essential investment for organizations seeking to enhance performance and streamline network management. Invest in the Lantronix SM48TAT4XA-RP for a powerful, secure, and highly manageable networking foundation..This model provides 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, delivering high-performance connectivity with full Layer 2 and Layer 3 management for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a generous power budget, making it ideal for powering IP cameras, wireless access points, and VoIP phones.All 48 ports offer Gigabit Ethernet speeds, complemented by 10 Gigabit uplinks through SFP+ slots for fast and reliable data transfer across demanding applications.Features a 1RU rack-mountable design, ensuring efficient use of space in enterprise network environments.Supports SNMP v1, v2c, and v3 protocols for secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, ensuring optimized traffic flow for voice, video, and data.Management options include Web GUI, CLI, Telnet, and SSH, along with security features such as RADIUS, TACACS+, SSL, and port-based MAC security for enhanced protection.Delivers a switching capacity of 176Gbps and supports operational modes like static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for safe and sustainable operation.5 Years Manufacturer's Warranty

Your network is under more pressure than ever. As the number of connected devices expands, bandwidth demands continue to soar, making it difficult to consistently provide the secure, high-speed connection your business depends on. SonicWall's feature-rich switches answer the challenge delivering high-speed switching, so you can add more devices, keep up with SaaS proliferation and gain more control, all while protecting your network and your budget. Its unified security posture makes it ideal for small and medium-sized businesses and Software Defined Branch (SD-Branch) deployments. Keep pace with the changing network and security landscape..Layer 2 managed switch with 24 x Gigabit Ethernet and 4 x 10Gbps SFP+ ports.24 PoE 802.3af/at ports provide a total of 410W of power, so you can power and connect your devices with a single wire.128Gbps line-rate fabric ensures congestion-free connectivity to your devices.1U dimension standard allows you to mount it to your rack.Supports Simple Network Management Protocol (SNMP) v1/v2c/v3.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use Capture Security Center.Secure SD-Branch solution transforms user experience at branch office locations by delivering a unified platform that enables branches to be deployed in minutes and delivers unified visibility and threat detection from a single pane of glass.Managed via firewalls for unified, single-pane-of-glass management of the entire SonicWall infrastructure.Features zero-touch deployment capability with the ability to quickly roll out devices across branches spread out globally.Meets or exceeds the FCC Class A, ICES Class A, CE (EMC Class A, LVD, RoHS), and UL/cUL standards.1-year manufacturer limited warranty

The Sonicwall SWS12-10FPOE switch delivers highspeed network switching while providing unparalleled performance and manageability. Its unified security posture, high port density, Power over Ethernet (PoE) and multigigabit performance capabilities makes it perfect for small and medium-sized business (SMB), and software-defined branch deployments. An integral part of the next-generation branch transformation, the Sonicwall switch is managed via firewall for unified, single-pane-of-glass management of the entire Sonicwall infrastructure. By tightly integrating with firewalls, the solution benefits from unified security posture and offers an end-to-end security solution that simplifies deployment, management and troubleshooting. This ensures seamless security and eliminates gap in security posture that may arise with third party switches. In conjunction, the Sonicwall switch offers Zero-Touch Deployment capability with the ability to quickly roll out devices across branches spread out globally. Admins can quickly and securely deploy these switches at new locations without requiring any costly on-site IT personnel..Managed desktop Gigabit Ethernet PoE switch delivers high-speed network switching for small and medium-sized businesses and software-defined branch deployments.Features 10 Gigabit Ethernet ports and two Gigabit SFP ports.Managed through Capture Security Center.Dimensions: 1.73"H x 13"W x 9.06"D.Power consumption: 152.8W.Certifications and standards: Meets or exceeds FCC Class A, ICES Class A, UL, cUL standards.Features energy-efficient design.Provides layer 2 switching.Full PoE capable, features 802.3af/at standard.PoE power: 130W.MTBF: 180837 hours.Operating temperature: 32 to 104 degrees Fahrenheit; storage temperature: -40 to 158 degrees Fahrenheit; humidity: 10-95%

Your network is under more pressure than ever. As the number of connected devices expands, bandwidth demands continue to soar, making it difficult to consistently provide the secure, high-speed connection your business depends on. SonicWall's feature-rich switches answer the challenge delivering high-speed switching, so you can add more devices, keep up with SaaS proliferation and gain more control, all while protecting your network and your budget. Its unified security posture makes it ideal for small and medium-sized businesses and Software Defined Branch (SD-Branch) deployments. Keep pace with the changing network and security landscape..Layer 2 managed switch with 24 x Gigabit Ethernet and 4 x 10Gbps SFP+ ports.128Gbps line-rate fabric ensures congestion-free connectivity to your devices.1U dimension standard allows you to mount it to your rack.Supports Simple Network Management Protocol (SNMP) v1/v2c/v3.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use Capture Security Center.Secure SD-Branch solution transforms user experience at branch office locations by delivering a unified platform that enables branches to be deployed in minutes and delivers unified visibility and threat detection from a single pane of glass.Managed via firewalls for unified, single-pane-of-glass management of the entire SonicWall infrastructure.Features zero-touch deployment capability with the ability to quickly roll out devices across branches spread out globally.Meets or exceeds the FCC Class A, ICES Class A, CE (EMC Class A, LVD, RoHS), and UL/cUL standards.1-year manufacturer limited warranty