Grippy Gloves
190 results
Attain long-lasting comfort with these gloves that feature a cotton flock lining to absorb perspiration. The embossed palms of these Ambitex Pro gloves provide a tactile texture that enhances grip in both wet and dry applications..Nitrile gloves have superior tactility and dexterity for greater control.Green nitrile material provides superior tactile sensitivity with lightness of fit.Large-size gloves are comfortable and secure.12 pairs per pack.Keep hands protected and comfortable inside these Ambitex Pro flock-lined green nitrile gloves.
ProFlex® Reinforced Thermal Waterproof Utility Gloves: Dual-zone insulation, waterproof insert and reinforced palm; keep hands warm and dry..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WATERPROOF + WINDPROOF – A weather-resistant ripstop outer shell, DWR water-repellent finish and a breathable insert block cold, moisture and wind to keep hands warm and dry.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable
Extensive testing ensures they are suited for medical, dental, laboratory, biotech, veterinary, and home healthcare needs, as well as public safety, security, and tattoo parlor uses. Made from premium nitrile, these exam gloves provide comfort that rivals latex—but they will not aggravate latex allergies—and offer excellent fit, feel and tactile sensitivity..Exam grade nitrile gloves, FDA approved for non-surgical medical use.Palm thickness: 6 mil.Tested to resist permeation against fentanyl for up to 240 min based on ASTM D6978 standard.Black color looks professional and hides dirt and grime.Powder- and latex-free.These large-size nitrile gloves are comfortable and secure.Textured fingertips and a micro-roughened surface enhance grip.Textured and chlorinated.Finger thickness: 7 mil.6mil Black Nitrile Examination Gloves from AMMEX are made to protect you from chemicals, contaminants, and bloodborne pathogens
ProFlex® Reinforced Thermal Utility Gloves: Dual-zone insulation and reinforced palm; built to battle the elements..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WEATHER-RESISTANT – Durable ripstop outer shell with DWR breathable water-repellent finish.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable
The MCR Safety Cut Pro series offers various cut protection levels and materials for your protection. This pair of cut-resistant work gloves features a 13-gauge Hypermax shell in salt-and-pepper color, coated with gray polyurethane (PU) on the palm and fingertips. The PU coating adds additional gripping power and abrasion resistance without compromising comfort or dexterity. This budget-friendly pair of cut-resistant work gloves provides the general-purpose hand protection you need. Looking for a pair of highly cut-resistant gloves? Look no further than MCR Safety Cut Pro..Cut-resistant pair of work gloves provides the general-purpose hand protection you need.Size: S.Features a 13-gauge Hypermax synthetic fiber shell in salt-and-pepper color with a white hem and gray polyurethane palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 4, and ANSI Puncture Level 2 standards.Dozen pairs of gloves per pack.Offers great dexterity and comfort
The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of cut-resistant work gloves features a 13-gauge Hypermax shell that is long-lasting and cool, providing a comfortable glove option that works as hard as you do. The shell possesses excellent cut resistance combined with a rugged bi-polymer palm coating, making this pair of gloves suited for a variety of tough applications. Provides gripping power that's sure to make your work day better. A reinforced thumb crotch adds strength and additional wear to this popular glove style. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Pair of cut-resistant work gloves suited for a variety of tough applications provides gripping power that's sure to make your workday better.Size: L.Features a 13-gauge Hypermax synthetic fiber shell in salt-and-pepper color with a white hem and black rugged bi-polymer palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A5, ANSI Abrasion Level 6, and ANSI Puncture Level 3 standards.Reinforced thumb crotch adds strength and additional wear.Friendly touch-screen design allows users to operate phones or other smart devices without removing the gloves
The MCR Safety Cut Pro series offers various cut protection levels and materials for your protection. This pair of cut-resistant work gloves features a 13-gauge Hypermax shell in salt-and-pepper color, coated with gray polyurethane (PU) on the palm and fingertips. The PU coating adds additional gripping power and abrasion resistance without compromising comfort or dexterity. This budget-friendly pair of cut-resistant work gloves provides the general-purpose hand protection you need. Looking for a pair of highly cut-resistant gloves? Look no further than MCR Safety Cut Pro..Cut-resistant pair of work gloves provides the general-purpose hand protection you need.Size: XXL.Features a 13-gauge Hypermax synthetic fiber shell in salt-and-pepper color with a white hem and gray polyurethane palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 4, and ANSI Puncture Level 2 standards.Dozen pairs of gloves per pack.Offers great dexterity and comfort
Ansell HyFlex® Size group 9 light nitrile gloves in black color have kevlar yarn lining for added durability. Gloves with a soft knit-wrist cuff offer enhanced grip in light oil conditions with good abrasion resistance..EN 388 3331, Cut level 3; ANSI Cut level 2.Size: Large (9).Color: Black.Patented Nylon and Kevlar® zonal plaiting on palm and back.Cuff style: Knit-wrist.Coating: Foam nitrile.Resistance: Light cut.Applications: Carpentry, drywall, roofing, electrical wiring in residential and commercial structures, forming, machining and bending of small sharp parts, general maintenance, general material handling.Incorporates comfort flex cuff, giving the wearer a soft feel.Provides enhanced grip in light oil conditions with good abrasion resistance.Silicone-free and latex-free for worker and product protection.Industries: Aerospace, appliance manufacturing, automotive, electricians, general carpentry, general industry, glass, metal fabrication, metalworking.12 Pair.Size 9 black foam nitrile palm coated gloves silicone-free and latex-free for worker and product protection.
The MCR Safety Cut Pro series offers various cut protection levels and materials for your protection. This pair of work gloves features a 13-gauge Hypermax shell in salt-and-pepper color, coated with gray polyurethane (PU) on the palm and fingertips, offering outstanding grip yet providing great flexibility to help relieve hand fatigue on long hardworking days. The seamless shell is cut-, tear-, and abrasion-resistant. Looking for a pair of highly cut-resistant gloves? Look no further than MCR Safety Cut Pro..This highly flexible pair of cut-resistant work gloves helps relieve hand fatigue on long hardworking days.Size: XL.Features a 13-gauge Hypermax synthetic fiber shell in salt-and-pepper color with a white hem and gray polyurethane palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A3, ANSI Abrasion 4, and ANSI Puncture 4; EN 388 :CE Score - Abrasion 4, EN 388 :CE Score - Cut 5, EN 388 :CE Score - Tear 4, EN 388:CE Score - Puncture 3 standards.Dozen pairs of gloves per pack.Offers excellent abrasion resistance
The MCR Safety Cut Pro series offers various cut protection levels and materials for your protection. This pair of work gloves features a 13-gauge Hypermax shell in salt-and-pepper color, coated with gray polyurethane (PU) on the palm and fingertips, offering outstanding grip yet providing great flexibility to help relieve hand fatigue on long hardworking days. The seamless shell is cut-, tear-, and abrasion-resistant. Looking for a pair of highly cut-resistant gloves? Look no further than MCR Safety Cut Pro..This highly flexible pair of cut-resistant work gloves helps relieve hand fatigue on long hardworking days.Size: XXL.Features a 13-gauge Hypermax synthetic fiber shell in salt-and-pepper color with a white hem and gray polyurethane palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A3, ANSI Abrasion 4, and ANSI Puncture 4; EN 388 :CE Score - Abrasion 4, EN 388 :CE Score - Cut 5, EN 388 :CE Score - Tear 4, EN 388:CE Score - Puncture 3 standards.Dozen pairs of gloves per pack.Offers excellent abrasion resistance
Good for handling glass, metals and ceramics and for working with power tools, as well as providing a steady grip while toting packages..1 Pair.Breathable spandex allows for lasting comfort.Patented silicone-fused palm for super-tacky grip.Airprene knuckle impact protection.Package-Handling Gloves.Primary material: Silicone.Hand Specific.Ideal for use when handling glass, metals, ceramics, baggage, and working hand or power tools
Free from the accelerators common in all disposable nitrile gloves, which have been linked to workplace conditions like Type IV dermatitis. Free from Natural Rubber Latex and Type I allergic reactions linked to Latex proteins..Size: Medium.Material: Nitrile.Thickness: 4 mil.Size group: 7 - 8.Style: Powder free.Cuff style: Rolled.Color: Hi-vis green.Resistance: Chemical.Grip design: Textured fingertips.Patented low-modulus formulation.Patented 100% accelerator-free nitrile formulation.Non-allergenic, latex-free option with greater grip, comfort and dexterity.Available with textured fingertips, N-DEX Free provides laboratory.Pharmaceutical and industrial workers an accelerator-free.Applications: EMS, patient exam, handling bloodborne pathogens, clinical laboratory and critical environments.Recommended for work: Janitorial, manufacturing, paint applications, food processing, fuel handling, laboratories, patient examination.Compliance and standards: CE certified.N-DEX Free green nitrile medium size powder free disposable glove is an patented accelerator-free formulation creates a luminous is great for jobs where increased visibility and color-coded operations are critical.
ProFlex® Reinforced Thermal Utility Gloves: Dual-zone insulation and reinforced palm; built to battle the elements..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WEATHER-RESISTANT – Durable ripstop outer shell with DWR breathable water-repellent finish.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable
7073 1-pair M Gray CR Gloves - Nitrile Coated A7 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP - Nitrile coated palms provide strong but flexible grip for secure handling with enhanced dexterity.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten carbide knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.BREATHABLE - Smooth nitrile layer allows airflow to pass through surface coating.TESTED - Meets EN388 4X42F and ANSI/ISEA 105-2016 level A7 cut resistant, level 6 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: S.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves
The MCR Safety Cut Pro series offers various cut protection levels and materials for your protection. This pair of cut-resistant work gloves features a 13-gauge Hypermax shell in salt-and-pepper color, coated with gray polyurethane (PU) on the palm and fingertips. The PU coating adds additional gripping power and abrasion resistance without compromising comfort or dexterity. This budget-friendly pair of cut-resistant work gloves provides the general-purpose hand protection you need. Looking for a pair of highly cut-resistant gloves? Look no further than MCR Safety Cut Pro..Cut-resistant pair of work gloves provides the general-purpose hand protection you need.Size: M.Features a 13-gauge Hypermax synthetic fiber shell in salt-and-pepper color with a white hem and gray polyurethane palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A2, ANSI Abrasion Level 4, and ANSI Puncture Level 2 standards.Dozen pairs of gloves per pack.Offers great dexterity and comfort
Extensive testing ensures they are suited for medical, dental, laboratory, biotech, veterinary, and home healthcare needs, as well as public safety, security, and tattoo parlor uses. Made from premium nitrile, these exam gloves provide comfort that rivals latex—but they will not aggravate latex allergies—and offer excellent fit, feel and tactile sensitivity..Exam grade nitrile gloves, FDA approved for non-surgical medical use.Palm thickness: 6 mil.Tested to resist permeation against fentanyl for up to 240 min based on ASTM D6978 standard.Black color looks professional and hides dirt and grime.Powder- and latex-free.1000 gloves: 10 boxes per carton, 100 gloves per box.Textured fingertips and a micro-roughened surface enhance grip.Textured and chlorinated.Finger thickness: 7 mil.6mil Black Nitrile Examination Gloves from AMMEX are made to protect you from chemicals, contaminants, and bloodborne pathogens
The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: XXL.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves
Ansell HyFlex® Size group 10 medium nitrile gloves in black color have kevlar yarn lining for added durability. Gloves with a soft knit-wrist cuff offer enhanced grip in light oil conditions with good abrasion resistance..EN 388 3331, Cut level 3; ANSI Cut level 2.Size: X-Large (10).Color: Black.Material: Kevlar yarn lining.Cuff style: Knit-wrist.Coating: Foam nitrile.Resistance: Light cut.Applications: Carpentry, drywall, roofing, electrical wiring in residential and commercial structures, forming, machining and bending of small sharp parts, general maintenance, general material handling.Incorporates comfort flex cuff, giving the wearer a soft feel.Provides enhanced grip in light oil conditions with good abrasion resistance.Silicone-free and latex-free for worker and product protection.Industries: Aerospace, appliance manufacturing, automotive, electricians, general carpentry, general industry, glass, metal fabrication, metalworking.12 Pair.Size 10 black foam nitrile coated palm gloves provides enhanced grip in light oil conditions with good abrasion resistance.
ProFlex® Reinforced Thermal Utility Gloves: Dual-zone insulation and reinforced palm; built to battle the elements..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WEATHER-RESISTANT – Durable ripstop outer shell with DWR breathable water-repellent finish.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable
Best Manufacturing Company Gloves are made of nitrile and are chlorinated to protect against abrasion. They feature straight cuffs for easy wearing and are available in green..X-Large, green nitrile gloves are non-sterile and meant for superficial skin contact.Powder-free, latex-free.Size: XL.12 pairs per pack.Cuff: Straight.Features 13" length, 15-mil thickness, flock lining and bisque non-slip grip..Ergonomic design maximizes comfort..Complies with FDA food handling requirements (21 CFR 177.2600)..12 pairs per pack.Best Manufacturing Company XL Gloves - Made of nitrile that provides resistance against chemicals and come in green
The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: L.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves
The MCR Safety Cut Pro series offers various cut protection levels at a competitive price. This pair of gloves has a cut-resistant shell in a high-visibility lime color that will keep you safer and visible in hazardous workplaces. The 18-gauge shell is cool, comfortable, and lightweight, providing maximum dexterity throughout your workday. Features a rugged nitrile palm coating and nitrile dots on the palm and fingers to improve gripping power. A reinforced thumb crotch adds additional wear. If you are looking for a pair of highly cut-resistant work gloves, look no further than MCR Safety Cut Pro..Comfortable and lightweight pair of work gloves for protection and maximum dexterity throughout your workday.Size: M.Features an 18-gauge Hypermax synthetic fiber shell in a high-visibility lime color with a white hem and black nitrile palm and fingertip coating.Knit wrists help prevent dirt and debris from entering the gloves.Meets or exceeds the ANSI Cut Level A4, ANSI Abrasion 5, and ANSI Puncture 3 standards.Nitrile dots on the palm and fingers improve gripping power.Reinforced thumb crotch adds additional wear.This high-visibility pair of gloves can make a lifesaving difference in your workday.Touch-screen friendly design allows operating phones and other smart devices without removing the gloves
7251 1-pair 2XL Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
7061 1-pair 2XL Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Memphis Gloves Predator Large coated gloves in blue color with nitrile coating are made of cotton jersey lining for comfort. Cut or abrasion resistant gloves with safety cuff are ideal for industrial or warehouse works..EN 388 4242, Cut level 2, Size: Large.Color: Blue/White Cuff.Coated gloves.Fully coated rough premium nitrile.Canvas safety cuff.Application: Abrasive applications, agriculture, chemical processing, construction, general maintenance, machinist, metal, handling, metal stamping, paint manufacturing, petrochemical industries, rebar.Lining: Jersey.Coatings: Single dip.Thread type: Poly/cotton.Palm: Rough finish.Cotton thread stitching with 11-12 stitches to an inch.12 Pair.Nitrile fully coated gloves with safety cuff.Size Large.100% cotton jersey lining for comfort, even at low working temperatures.Launderable.Cut, abrasion, snag and puncture resistance.Industrial and warehouse work gloves for many applications
Memphis™ Economy Foam Nitrile Gloves, Medium, Gray/Black, 12 Pairs.Primary material: Nitrile; Nylon.12 Pairs.Gloves for small parts handling where tactile sensitivity and dexterity are important.Nitrile-dipped palm and fingers
7251 1-pair L Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Best Manufacturing Company Gray/Blue M Rubber Palm Coating Gloves are manufactured using a premium quality cotton blend with a rubber coating. They offer a comfortable fit and strong grip..Type & Material: Rubber, Cotton & Cotton Blend Coated Gloves.Color: Blue & Gray.Size: M.Cuff: Knit Wrist.Features: Gloves Provide Durable Protection without Sacrificing Long-Wearing Comfort.Best Manufacturing Company Gray/Blue M Rubber Palm Coating Gloves - Rubber coating allows for a strong grip
7251 1-pair XL Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
AMMEX® Gloveworks® HD Orange Nitrile Powder Free Industrial Gloves are designed and engineered to handle the toughest jobs. Their raised diamond texture provides an unbeatable grip by channeling away liquids. Excellent puncture and chemical resistance.8-mil extra thick for added strength, durability, greater resistance to rips, tears, and punctures, and provides for extended-duration use.Raised Diamond Texture (RDT) for a superior grip.Feature extra protection from grease, gasoline, pesticides, cleaning solutions, and a long list of specialty chemicals.100 gloves per box, 10 boxes per carton.They’re made from component materials that comply with FDA regulations for food contact, which makes them perfect for food processing applications.Palm thickness: 8 mil.Finger thickness: 9 mil
Use these leather work gloves with a cotton lining for comfort on the job. The leather knuckle strap and finger tips provide extra grip, and the elastic closure inside the gloves keeps them secure. With a Gunn cut pattern for durability and a rubberized cuff for easy removal, these PIP leather gloves are built for active work sites and come in a box of 12 pairs..Constructed of "B" grade shoulder split cowhide.Cotton lined palm for extra comfort.Gunn cut pattern delivers excellent durability, wear and comfort, especially for heavier gloves.Wing thumb increases comfort in open-handed work.Fabric back provides breathability and flexibility.Leather knuckle strap and finger tips for extra protection.Elastic closure sewn inside glove for safety and comfort.This style is also available in a Right Hand Only option... 83-6563/L/RHO.Rubberized fabric safety cuff helps protect wrist, allows for fast removal, and water resistance.⚠ WARNING: Cancer - www.P65Warnings.ca.gov.Most popular grade, providing the best mix of quality and price. Used in construction, metalworking, general maintenance, warehousing and other medium and light duty applications.
7061 1-pair S Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
7061 1-pair XL Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
7251 1-pair S Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
7061 1-pair L Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Best Manufacturing Company Gray/Blue L Rubber Palm Coating Gloves are manufactured using a premium quality cotton blend with a rubber coating. They offer a comfortable fit and strong grip..Type & Material: Rubber, Cotton & Cotton Blend Coated Gloves.Color: Blue & Gray.Size: L.Cuff: Knit Wrist.Features: Gloves Provide Durable Protection without Sacrificing Long-Wearing Comfort.Best Manufacturing Company Gray/Blue L Rubber Palm Coating Gloves - Rubber coating allows for a strong grip
7061 1-pair M Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
When you need disposable gloves with the strength of nitrile, balanced with excellent dexterity for lighter-duty applications, look no further than the Ammex X3 blue nitrile powder-free industrial gloves. These gloves will change everything you thought you knew about 3-mil nitrile. They offer a level of performance you might expect from thicker gloves, with greater comfort and tactile sensitivity. The Ammex X3 blue nitrile powder-free industrial gloves are perfect for short-duration use where frequent glove changes are required, especially for food service, janitorial, and sanitation applications. They're made of component materials that comply with the FDA regulations for food contact. They are latex-free, powder-free, and chlorinated for easy changing..Disposable powder-free industrial-grade gloves are perfect for short-duration use where frequent glove changes are required.Size: L.Made of premium blue nitrile which provides a dependable barrier against cleaning solutions, paint, and a wide variety of common and specialty chemicals.Micro-roughened finish enhances grip even when wet.Complies with the FDA regulations for food contact.Nitrile has three times the puncture resistance of latex, so you can be confident your hands are protected.Latex-free, powder-free, and chlorinated for easy changing.Perfect for food service, janitorial, and sanitation applications.Thickness (palm): 3 mil.100 gloves per box.Finger thickness: 4 mil
When you need disposable gloves with the strength of nitrile, balanced with excellent dexterity for lighter-duty applications, look no further than the Ammex X3 blue nitrile powder-free industrial gloves. These gloves will change everything you thought you knew about 3-mil nitrile. They offer a level of performance you might expect from thicker gloves, with greater comfort and tactile sensitivity. The Ammex X3 blue nitrile powder-free industrial gloves are perfect for short-duration use where frequent glove changes are required, especially for food service, janitorial, and sanitation applications. They're made of component materials that comply with the FDA regulations for food contact. They are latex-free, powder-free, and chlorinated for easy changing..Disposable powder-free industrial-grade gloves are perfect for short-duration use where frequent glove changes are required.Size: M.Made of premium blue nitrile which provides a dependable barrier against cleaning solutions, paint, and a wide variety of common and specialty chemicals.Micro-roughened finish enhances grip even when wet.Complies with the FDA regulations for food contact.Nitrile has three times the puncture resistance of latex, so you can be confident your hands are protected.Latex-free, powder-free, and chlorinated for easy changing.Perfect for food service, janitorial, and sanitation applications.Thickness (palm): 3 mil.100 gloves per box.Finger thickness: 4 mil
When you need disposable gloves with the strength of nitrile, balanced with excellent dexterity for lighter-duty applications, look no further than the Ammex X3 blue nitrile powder-free industrial gloves. These gloves will change everything you thought you knew about 3-mil nitrile. They offer a level of performance you might expect from thicker gloves, with greater comfort and tactile sensitivity. The Ammex X3 blue nitrile powder-free industrial gloves are perfect for short-duration use where frequent glove changes are required, especially for food service, janitorial, and sanitation applications. They're made of component materials that comply with the FDA regulations for food contact. They are latex-free, powder-free, and chlorinated for easy changing..Disposable powder-free industrial-grade gloves are perfect for short-duration use where frequent glove changes are required.Size: XL.Made of premium blue nitrile which provides a dependable barrier against cleaning solutions, paint, and a wide variety of common and specialty chemicals.Micro-roughened finish enhances grip even when wet.Complies with the FDA regulations for food contact.Nitrile has three times the puncture resistance of latex, so you can be confident your hands are protected.Latex-free, powder-free, and chlorinated for easy changing.Perfect for food service, janitorial, and sanitation applications.Thickness (palm): 3 mil.100 gloves per box.Finger thickness: 4 mil
When you need disposable gloves with the strength of nitrile, balanced with excellent dexterity for lighter-duty applications, look no further than the Ammex X3 blue nitrile powder-free industrial gloves. These gloves will change everything you thought you knew about 3-mil nitrile. They offer a level of performance you might expect from thicker gloves, with greater comfort and tactile sensitivity. The Ammex X3 blue nitrile powder-free industrial gloves are perfect for short-duration use where frequent glove changes are required, especially for food service, janitorial, and sanitation applications. They're made of component materials that comply with the FDA regulations for food contact. They are latex-free, powder-free, and chlorinated for easy changing..Disposable powder-free industrial-grade gloves are perfect for short-duration use where frequent glove changes are required.Size: XL.Made of premium blue nitrile which provides a dependable barrier against cleaning solutions, paint, and a wide variety of common and specialty chemicals.Micro-roughened finish enhances grip even when wet.Complies with the FDA regulations for food contact.Nitrile has three times the puncture resistance of latex, so you can be confident your hands are protected.Latex-free, powder-free, and chlorinated for easy changing.Perfect for food service, janitorial, and sanitation applications.Thickness (palm): 3 mil.100 gloves per box, 10 boxes per carton (1000 gloves in total).Finger thickness: 4 mil
Use these leather work gloves with a cotton lining for comfort on the job. The leather knuckle strap and finger tips provide extra grip, and the elastic closure inside the gloves keeps them secure. With a Gunn cut pattern for durability and a rubberized cuff for easy removal, these PIP leather gloves are built for active work sites and come in a box of 12 pairs..Constructed of "B" grade shoulder split cowhide.Cotton lined palm for extra comfort.Gunn cut pattern delivers excellent durability, wear and comfort, especially for heavier gloves.Wing thumb increases comfort in open-handed work.Fabric back provides breathability and flexibility.Leather knuckle strap and finger tips for extra protection.Elastic closure sewn inside glove for safety and comfort.This style is also available in a Right Hand Only option... 83-6563/L/RHO.Rubberized fabric safety cuff helps protect wrist, allows for fast removal, and water resistance.⚠ WARNING: Cancer - www.P65Warnings.ca.gov.Most popular grade, providing the best mix of quality and price. Used in construction, metalworking, general maintenance, warehousing and other medium and light duty applications.
When you need disposable gloves with the strength of nitrile, balanced with excellent dexterity for lighter-duty applications, look no further than the Ammex X3 blue nitrile powder-free industrial gloves. These gloves will change everything you thought you knew about 3-mil nitrile. They offer a level of performance you might expect from thicker gloves, with greater comfort and tactile sensitivity. The Ammex X3 blue nitrile powder-free industrial gloves are perfect for short-duration use where frequent glove changes are required, especially for food service, janitorial, and sanitation applications. They're made of component materials that comply with the FDA regulations for food contact. They are latex-free, powder-free, and chlorinated for easy changing..Disposable powder-free industrial-grade gloves are perfect for short-duration use where frequent glove changes are required.Size: S.Made of premium blue nitrile which provides a dependable barrier against cleaning solutions, paint, and a wide variety of common and specialty chemicals.Micro-roughened finish enhances grip even when wet.Complies with the FDA regulations for food contact.Nitrile has three times the puncture resistance of latex, so you can be confident your hands are protected.Latex-free, powder-free, and chlorinated for easy changing.Perfect for food service, janitorial, and sanitation applications.Thickness (palm): 3 mil.100 gloves per box.Finger thickness: 4 mil
7251 1-pair M Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Provide a firm grip and a layer of protection with these PVC gloves. PVC insulation provides some protection against shocks, vibrations, and abrasions, while the open-textured palms assist in firmly gripping wet surfaces. The non-insulated backing in these NorthFlex Red gloves keeps them well-ventilated for comfort..General purpose gloves.Made from red 15-gauge nylon with black foam PVC coating.Size: medium.Knit-wrist cuff.PVC coating on palm and fingertips.Meets or exceeds ANSI/ISEA 105 - ASTM D3389-05, ANSI/ISEA 105 - ASTM F1790-97, EN388, EN420, OSHA standard -29 CFR 1915.157 standards.Dozen pairs of gloves per pack.General purpose.Protect your employees' hands without sacrificing productivity by stocking this 12 pack of NorthFlex Red PVC gloves.