HDMI Signal Booster Extenders

StarTech.com® Black active high-speed HDMI cable enables you to connect high-definition LCD TVs, LCD projectors, plasma TVs, HDTVs and DVD players. The 80' cable carries high-definition video and audio simultaneously thus providing hassle-free wiring connection. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 26 AWG conductor of the cable has aluminum-mylar foil with braid shielding to secure data from electromagnetic and radio frequency interference. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Built-in amplifier circuitry boosts the HDMI signal without any external power and delivers precision output..Active high speed HDMI cable supports ultra hd resolutions up to 4k x 2k.Easy-to-install 80' long cord.HDMI (19 pin) male-to-male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Built-in amplifier circuitry construction enhance HDMI signal to 80 feet away without any external power.Comes in black color for a new look.Meets CMG flame retardant test to minimize fire hazards.The 26 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.Gold-plated connector plating for good conductivity.Offers high bandwidth, uncompressed video and multi-channel digital audio in one cable for additional user convenience.Cable supports resolutions up to 4k x 2k.Meets all requirements and standards of RoHS.Includes 1 x 80' active high speed HDMI cable HDMI M/M.Single-cable solution for quickly connecting your HDMI capable A/V devices over long distances.Comes with 2 years limited warranty.StarTech.com® HDMIMM80AC 80' Active HDMI Cable with male/male HDMI connectors supports 4k x 2k video signal. Amplifier circuitry prevents data loss over long distances.

ATEN VE814AT is an HDBaseT Video Transmitter that is capable of sending HDMI signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable. Featuring dual synchronous outputs, the VE814AT can transmit video signal to two remote displays and one at the local side. This HDCP 2.2-compliant transmitter meets the HDMI Specification, including 3D, Deep Color, the maximum data rate of (10.2 Gbps), and 4K video quality up to 100 m. The VE814AT supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit (VE814AR) while granting access to the HDMI display device from the local unit (VE8014AT). In addition, it supports Long Reach Mode that extends HDMI signals up to 150 m, 1080p, via a single Cat 5e/6 cable. The VE814AT is a powerful solution for where digital signage is required, such as bars, educational spaces, and public transportation stations, allowing display of identical contents at different spots..RS-232 channel - allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners.ATEN EDID Technology -- when both transmitter and receiver sides are connected, VE814A adopts the EDID values of the display connected to the VE814AT for high-quality output.Supports two IR channels for simultaneous IR signal transmissions, ranged from 30 KHz to 56 KHz.Extends Ethernet communication using the Ethernet pass-through port

Extend or Split Video Transmission over Cat 6 IOGEAR's 4K Video Extender/Splitter Over CAT 6 Kit is the perfect choice for users who wish to extend or split video over longer lengths than HDMI® cables can handle without video degradation issues. HDMI cables max out at 50 ft, while CAT 6 can extend to 230 ft (165 ft between receivers). CAT 6 cables are more efficient to run through walls, attics and crawl spaces. And, CAT 6 cables are 60% less expensive than HDMI cables and are less likely to fail over time. Extender Mode VS Splitter Mode Extender Mode: The major benefit of this mode is it allows you to extend the distance between two devices without loss of video quality. For example, you want to view a film on a Blu-ray™ player but in a different room--extender mode makes this connection possible. Splitter Mode: The major benefit of this mode is taking one source video and playing it on many receiving screens. For example, in an office/store setting, you have multiple monitors that need to play the same video and are rather far in distance from each other. Cascade up to 10 display devices with 10 receivers. 4K Video Quality Enjoy cinema-quality video. This 4K extender kit transmits resolutions up to 4096 x 2160 @30Hz or 3840 x 2160 @60Hz (4:4:4) with 18 Gbps bandwidth, with close to zero latency. Superior Audio Quality IOGEAR's 4K Video Extender/Splitter Kit includes the PDIF port to support LPCM, DTS-HD®, DTS®, Dolby® TrueHD 7.1, Dolby® Digital 5.1 audio formats. With the flip of a switch, select ARC for returning audio from compatible displays. An HDMI loop-out allows an additional display to be connected on the transmitter side. More from the Manufacturer.Supports resolutions up to 4096 x 2160 @30Hz or 3840 x 2160 @60Hz (4:4:4).Near zero latency (1ms) allows use for gaming or other low latency dependent uses.Transmitter features HDMI output for local display connection.Supported audio: LPCM, DTS-HD, DTS, Dolby TrueHD 7.1, Dolby Digital 5.1

The HDMI HDBaseT + USB-B to A and RS232 over Cat Extender Single Gang Wall Plate Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where USB must also be extended alongside HDMI video and audio to interactive whiteboards and displays in conference rooms, classrooms, lecture halls, and many other installation needs far beyond the length limitations of standard HDMI cabling. This HDBaseT kit extends HDMI and high speed USB 2.0 over a single Cat5e, Cat6, or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI up to 130 feet using a Cat6a cable. Extend USB 2.0 pass through up to 230ft, connecting up to 4 USB devices to the receiver. This kit is HDCP 2.2 compliant, making sure that the connection from the source is secure. Multi-channel audio formats are supported, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X. High speed USB 2.0 pass-through supports up to 230ft for KVM control of devices such as USB cameras, keyboards, mice, etc. With one-way Power over HDBaseT (PoH) support, the transmitter gets its power from the receiver, so no additional power adapter is required, allowing for greater installation flexibility. Advanced users can control RS232 pass-through to pass RS232 commands between the wall plate and the receiver. The receiver toggle switch also allows for the selection of upgrades that can upgrade both the wall plate and receiver. Support this HDBaseT system that is already deployed in the field by upgrading firmware through the Micro-USB port on front panel of the wall plate transmitter, and upgrade the firmware through the RS232 port on rear panel of the receiver. Note: Ensure a solid, reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors..Extend 4K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable.HDCP 2.2 compliant, to create a secure connection between the source and display.HDBaseT Chipset VS210, for simpler HDBaseT installations.The Transmitter supports automatic switching, following the last-in-first-out rule

The VE1812R features Power over HDBaseT (POH) which sends power from Tx to Rx over Cat 5e / 6 / 6a cable without any additional power supply. The VE1812R supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the receiver unit (VE1812R) while also accessing the HDMI display device from the transmitter unit (VE1812T). The IR signals can also be extended in both directions. The VE1812R HDMI HDBaseT Receiver with POH is HDMI (3D, Deep Color, 4kx2k) and HDCP compatible. When transmitting HDMI / 4K with a Cat 6a or ATEN 2L-2910 Cat 6 cable, the maximum distance can reach up to 100 meters. With Long Reach Mode enabled, the VE1812R can extend HDMI signal up to 150m @1080p. The VE1812R is perfect for digital classrooms, video conference rooms, gaming or any installation that requires superior video quality..Bi-directional IR channel - Two way IR protocol delivery by one IR port; IR transmission is processed one direction at a time.Bi-directional RS-232 channel - allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners.POH (Power over HDBaseT) - supplies power from Transmitter to Receiver over a long distance via one Cat 5e / 6 / 6a cable.HDBaseT Anti-jamming - resists signal interference during high - quality video transmission using HDBaseT technology

These Active High Speed HDMI Cables are the perfect solution for experiencing resolutions up to 4K (4096 x 2160 at 60hz, 4:4:4), bandwidths up to 18Gbps, HDR for higher contrast ratios and vivid colors, plus 32 uncompressed digital audio channels to provide crystal-clear sound-making them ideal for classrooms, conference rooms, houses of worship, and other commercial environments. These cables are designed to exceed the highest measure of HDMI performance and will enhance video experiences with higher resolutions, increased speeds, sharper images and are backward compatible with previous HDMI specifications for existing HDMI devices. They have a built-in signal booster that supports HDMI A/V connections at longer distances than non-active cables and this cable does not require an external power adapter. They also deliver dual video streams, so that two videos can be viewed simultaneously on a single display..Data cable with HDMI 4K interface.Cable length: 35'.HDMI (19-pin) to HDMI (19-pin) connectors.26AWG black cable with PVC jacket to protect this cable from environmental factors.Features: 4K support, active cable, CL3 rated jacket, Audio Return Channel (ARC), Dolby TrueHD support, and Dolby DTS-HD Master Audio support.Compatible with your computer.Meets or exceeds CEC and RoHS II 2011/65/EU standards.3-year manufacturer limited warranty

These Active High Speed HDMI Cables are the perfect solution for experiencing resolutions up to 4K (4096 x 2160 at 60hz, 4:4:4), bandwidths up to 18Gbps, HDR for higher contrast ratios and vivid colors, plus 32 uncompressed digital audio channels to provide crystal-clear sound-making them ideal for classrooms, conference rooms, houses of worship, and other commercial environments. These cables are designed to exceed the highest measure of HDMI performance and will enhance video experiences with higher resolutions, increased speeds, sharper images and are backward compatible with previous HDMI specifications for existing HDMI devices. They have a built-in signal booster that supports HDMI A/V connections at longer distances than non-active cables and this cable does not require an external power adapter. They also deliver dual video streams, so that two videos can be viewed simultaneously on a single display..Data cable with HDMI 4K interface.Cable length: 50'.HDMI (19-pin) to HDMI (19-pin) connectors.26AWG black cable with PVC jacket to protect this cable from environmental factors.Features: 4K support, active cable, Dolby TrueHD support, Audio Return Channel (ARC), CL3 rated jacket, and Dolby DTS-HD Master Audio support.Compatible with your computer.Meets or exceeds CEC and RoHS II 2011/65/EU standards.3-year manufacturer limited warranty