ID Holder Arm Straps

When you want to display your ID card, visitors pass or security authorization with safety and style in mind, Baumgartens vinyl, credit card sized badge holder fits the bill..Zip closure provides extra protection from weather to make sure your ID badge is dry and secure..Pre-punched to attach to card reels, lanyards, chains or barbs..Made of clear, sturdy vinyl..Maximum insert size: 3 3/4" x 2 5/8" ; Horizontal.50 badge holders per pack..This product is manufactured by a certified WBE (women owned business).⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

3110F(X) Shock absorbing tool lanyard with carabiner on both ends: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load this design prevents the tool from pulling the user down with it protecting those above as well as those below. (19822).Shock absorbing properties reduce the dynamic force on the body or other anchor point if drop occurs.Durable 1680 denier polyester elastic blended webbing extends from 38" to 70" (96cm - 178cm).Low profile lightweight design reduces snag hazards and added weight.Anodized aluminum alloy carabiners with double action locking gate and inherent captive eye.High strength 3-ply nylon stitching secures connecting ends.Single length construction eliminates weak points seen with multi-component lanyards.Third party certified to a 15lbs (6.8kg) maximum capacity with 2:1 safety factor.Patent pending design

Ergodyne Squids 5545 Arm & Wrist Scanner Mount.QUICK, SECURE ACCESS - Prevents drops, keeps scanners close and ready.360° ROTATION - Scanner mount rotates to access all buttons and controls in either portrait or landscape mode.EASY INSTALLATION - Durable hook & loop straps wrap around arms or wrist for a secure fit.DETACHABLE MOUNT - Scanner holder easily detaches and locks back into place.ALL-DAY COMFORT - High-quality elastic band is breathable and lightweight.ACCESSORY SLOT - Elastic accessory loop holds a stylus, pen, pencil, marker or small cutting tool.FLEXIBLE SCANNER SIZING - Snug elastic sides accommodate a variety of scanner sizes.FOR SCANNERS/MOBILE COMPUTERS AND PHONES WITHOUT HANDLES.EXTENDER STRAP INCLUDED - For extended sizing to fit over bulky outerwear.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ergodyne Squids 5545 Arm & Wrist Scanner Mount.QUICK, SECURE ACCESS - Prevents drops, keeps scanners close and ready.360° ROTATION - Scanner mount rotates to access all buttons and controls in either portrait or landscape mode.EASY INSTALLATION - Durable hook & loop straps wrap around arms or wrist for a secure fit.DETACHABLE MOUNT - Scanner holder easily detaches and locks back into place.ALL-DAY COMFORT - High-quality elastic band is breathable and lightweight.ACCESSORY SLOT - Elastic accessory loop holds a stylus, pen, pencil, marker or small cutting tool.FLEXIBLE SCANNER SIZING - Snug elastic sides accommodate a variety of scanner sizes.FOR SCANNERS/MOBILE COMPUTERS AND PHONES WITHOUT HANDLES.EXTENDER STRAP INCLUDED - For extended sizing to fit over bulky outerwear.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Easily attach your ID card or badge to your person for easy identification. Self-laminating badge holder provides more protection for your ID badges. Pre-punched and includes clip to easily attach to card reels, lanyards, chains or barbs. Can also be used to laminate business cards..Provides more protection by laminating your ID badges..Pre-punched and includes clip to easily attach to card reels, lanyards, chains or barbs..Can also be used to laminate business cards..Maximum insert size: 3 1/2" x 2 1/4" ; Horizontal.25 badge holders per pack..This product is manufactured by a certified WBE (women owned business).⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.If you work in the health profession, you are security or personnel that requires identification or security authorization, an ID card holder is an essential item for you.

The Squids 3132 barcode scanner lanyard harness keeps barcode scanners secure and accessible during warehouse and distribution work. With its ambidextrous design, the industrial-grade harness maintains a comfortable fit for both right- and left-handed workers while keeping scanners ready for use. Two small loop attachments connect to captive holes built into the scanners, allowing them to hang comfortably on the hip when not in use and preventing damage or injury caused by drops..This lanyard harness is designed for attaching to cordless barcode scanners for work in warehouses, general distribution centers, as well as food and beverage distribution centers.Size: large.Made from heavy-duty materials, comes in black.Ambidextrous design allows for easy reconfiguring for right- and left-handed workers.Prevents drops, keeps barcode scanners close and ready.Webbing straps and buckles curve to fit worker's body, allowing for easy adjustment and long-lasting comfort.Two loop attachments connect to small captive holes built into a cordless scanner for secure tethering to the lanyard harness.Fits most standard jobsite scanners.When necessary, hand wash with mild soap and water and dry

Avery ID Badge Holder with Lanyard, Clear, 25/Pack (8520).Fasten this ID badge holder to clothing, bags, and more to keep your hands free.Cord-attached badge holders are convenient for any clothing style.Insert loading style.Size: 4 1/4"W x 6"L.Designed for use with both inkjet and laser printers for optimal versatility.25 per pack.Made of plastic.Comes in clear.Portrait orientation for easy loading of the badge

The Squids® Water Resistant Phone Pouch and Trap makes it easy to carry and use your cell phone on the job while preventing dropped objects when working at-heights.This cell phone pouch is made of a clear touchscreen material that provides protection while still allowing touchscreen use and access to both the front and rear cameras of smartphones. The heavy-duty, easy-to-use zipper closure system safely secures the device inside the cell phone holder.There is a steel grommet/ring on the bottom to attach a tool lanyard for a complete tethering system. The sides of the smartphone pouch are made of heavy-duty, water-resistant reinforced tarpaulin, making it perfect for the harshest work environments.The smartphone sleeve is also great for the beach, boating, fishing, water-theme parks, camping, hiking or any other outdoor activity. Protect your phone from rain, snow, dirt, dust and sand..Approved to the ANSI/ISEA 121-2018 standard.Water resistant main material protects cell phone from rain, snow, dirt, dust and sand.Clear touchscreen material allows for full screen and camera functions.Heavy-duty zipper securely holds cell phones inside the pouch.Steel grommet/ring can be used to easily connect a tool lanyard.Tarpaulin reinforced side material for durability.Available in standard and plus sizes (see size chart to find the right fit for your cell phone).Designed to fit your cell phone without having to remove other aftermarket cell phone cases.Third party certified to a 1lb. (0.5kg.) maximum capacity.Patent pending

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

The Squids 3132 barcode scanner lanyard harness keeps barcode scanners secure and accessible during warehouse and distribution work. With its ambidextrous design, the industrial-grade harness maintains a comfortable fit for both right- and left-handed workers while keeping scanners ready for use. Two small loop attachments connect to captive holes built into the scanners, allowing them to hang comfortably on the hip when not in use and preventing damage or injury caused by drops..This lanyard harness is designed for attaching to cordless barcode scanners for work in warehouses, general distribution centers, as well as food and beverage distribution centers.Size: small.Made from heavy-duty materials, comes in black.Ambidextrous design allows for easy reconfiguring for right- and left-handed workers.Prevents drops, keeps barcode scanners close and ready.Webbing straps and buckles curve to fit worker's body, allowing for easy adjustment and long-lasting comfort.Two loop attachments connect to small captive holes built into a cordless scanner for secure tethering to the lanyard harness.Fits most standard jobsite scanners.When necessary, hand wash with mild soap and water and dry

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

Staples rubberized ID badge holder is durable and features a window for easy viewing as well as horizontal and vertical placement.Durable rubberized material.Pink.4" x 2.75".Window for viewing.Can be used horizontally or vertically.Staples® Brand 100% Satisfaction Guarantee

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

Look fashionable in work with the high quality faux leather ID Badge holder. Cute mint color with a braided landyard..High Quality Faux Leather.Holds ID & Card Keys.Braided Lanyard.Deluxe ID Case with Lanyard Mint

Keep any credit card-sized insert well-secured with this 50-pack of Baumgartens vertical card holders. Made from SICURIX clear vinyl, these card holders can store documents up to 3-3/4 x 2-5/8 inches, and die-cut holes provide sturdy support for lanyards, while the airtight seal ensures reliable transport of proximity cards and badges. The size and material of these Baumgartens vertical card holders make them ideal for any security credentials..Fasten this ID badge holder to clothing, bags, and more to keep your hands free.Size: 2.63"W x 3.75"L.Comes in a pack of 50 ID badge holders.Portrait-orientation for easy loading of the badge.Made from vinyl for durability.This product is manufactured by a certified WBE (women owned business).⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Protect your ID badge from the elements with these Baumgartens sealable card holders.

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace