Interconnect Cables

The C2G 22011 15' Cat5e 350MHz snagless unshielded blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.34 lbs..Comes with lifetime warranty.Category 5e for Network Device.6" LP4 to LP4 SATA power Y cable adapter features powers an IDE (LP4 connected) drive using a SATA power connector from the computer power supply.

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

Category 6 for Network Device.RJ-45 Male.RJ-45 Male.1ft.Blue

The C2G High Speed HDMI with Ethernet Cable is perfect for home theater or desktop audio video applications requiring high speed HDMI features and video resolutions up to 4k (2160p). The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection for accessing interactive online content or updating device firmware. This fully-functional, high bandwidth cable is tested to perform at industry standards and is backed by a lifetime warranty. This cable can be utilized for network switch stacking with compatible equipment. Experience the latest HDMI features including, 4K@50/60, (2160p), which is 4 times the clarity of 1080p/60 video resolution, 3D video, Deep Color and x.v. Color, Dolby True HD, DTS-HD Master Audio and up to 32 audio channels for a multi-dimensional immersive audio experience, Up to 1536kHz audio sample frequency for the highest audio fidelity, Simultaneous delivery of dual video streams to multiple users on the same screen, Simultaneous delivery of multi-stream audio to multiple users (up to 4), Support for the wide angle theatrical 21:9 video aspect ratio, Dynamic synchronization of video and audio streams, and CEC extensions for control of consumer electronics devices through a single control point. Note: To utilize HDMI stacking for network equipment all attached equipment must use the same firmware. Both the source device and display must support a HDMI feature in order to pass that feature through this cable..Data cable with HDMI interface.Cable length: 5'.HDMI (19-pin) to HDMI (19-pin) connectors.30AWG black cable with PVC jacket to protect this cable from environmental factors.Compatible with your computer.Meets or exceeds RoHS standard.Lifetime manufacturer limited warranty

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

The C2G 22014 15' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15 ft.Black.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty.The StarTech Slimline Serial DB9 gender changer is a reliable way to convert a nine-pin female port to a nine-pin male port.

The C2G High Speed HDMI with Ethernet Cable is perfect for home theater or desktop audio video applications requiring high speed HDMI features and video resolutions up to 4k (2160p). The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection for accessing interactive online content or updating device firmware. This fully-functional, high bandwidth cable is tested to perform at industry standards and is backed by a lifetime warranty. This cable can be utilized for network switch stacking with compatible equipment. Experience the latest HDMI features including: 4K@50/60, (2160p), which is 4 times the clarity of 1080p/60 video resolution, 3D video, Deep Color and x.v. Color • Dolby True HD, DTS-HD Master Audio and up to 32 audio channels for a multi-dimensional immersive audio experience, Up to 1536kHz audio sample frequency for the highest audio fidelity, Simultaneous delivery of dual video streams to multiple users on the same screen, Simultaneous delivery of multi-stream audio to multiple users (up to 4), Support for the wide angle theatrical 21:9 video aspect ratio, Dynamic synchronization of video and audio streams, and CEC extensions for control of consumer electronics devices through a single control point. Note: To utilize HDMI stacking for network equipment all attached equipment must use the same firmware. Both the source device and display must support a HDMI feature in order to pass that feature through this cable..Data cable with HDMI interface.Cable length: 2'.HDMI (19-pin) to HDMI (19-pin) connectors.30AWG black cable with PVC jacket to protect this cable from environmental factors.Compatible with your computer.Meets or exceeds RoHS standard.Lifetime manufacturer limited warranty

The C2G ® 12' high speed HDMI audio/video cable with Ethernet, connects a multimedia device to a display and support the latest HDMI features like Ultra HD, 4k at 50/60, up to 32 audio channels as well as wide angle theatrical 21:9 video aspect ratio. It is great is for home theater or desktop audio video applications. The Ethernet allows a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection for updating device firmware. This cable supports Dolby ® True HD, DTS-HD master audio and up to 32 audio channels for a multi-dimensional audio experience..HDMI for Audio/Video Device.12 ft.1 x HDMI Male Digital Audio/Video.Gold Plated.Features HDPE or foamed PE insulation, 30 AWG 5-pair tinned copper conductors, 30 AWG drain wire conductor for better conductivity.Comes in black color.Resistance: 100 ohm insulation, Nominal attenuation: 300 kHz - 825 MHz at <5dB, 825 MHz - 2.475 GHz at <5dB.Dimensions: 10 mm H x 20 mm W x 37.1 mm D, 6 + 0.2 mm O.D. jacket.Power supply: 30 V, Dielectric strength: 500 VAC/1 min.Minimum bend radius: 60 deg.Maximum resolution supported: 4K (2160p), which is 4 times the clarity of 1080p/60 video resolution.Supports 3D video, deep color and x.v. color, high bandwidth or high speed data transfer.Offers Dolby true HD, DTS-HD master audio and up to 32 audio channels for a multi-dimensional immersive audio experience.Provides up to 1536 kHz audio sample frequency for the highest audio fidelity.Simultaneously delivers dual video streams and multi-stream audio to multiple users.Supports the wide angle theatrical 21 : 9 video aspect ratio and dynamic synchronization of video as well audio streams.Weight: 0.35 lbs..Comes with lifetime warranty

The C2G ® 10' black adapter cable is a perfect solution for connecting the mini DisplayPort or Thunderbolt™ output of a small laptop or tablet to a monitor or other display, which accepts a DisplayPort input. It has a mini DisplayPort male DisplayPort 1.2 digital audio/video connector on first end and DisplayPort male DisplayPort 1.2 digital audio/video connector on the second end. This adapter cable carries a digital audio/video signal and supports up to 4k resolution for superior video quality. It meets the requirements of high performance applications. This cable is suitable for conference rooms, corporate offices and home offices..Adapter cable is suitable for connecting the Mini DisplayPort or Thunderbolt output of a small laptop or tablet to a computer monitor.Cable length: 10'.Has mini DisplayPort male digital audio/video connector on first end and 20-pin DisplayPort male digital audio/video connector on second end.PVC jacket offers protection against corrosive environment.Features aluminum foil wrap braided shielding and foam-polyethylene insulation to minimize EMI/RFI interference.Features two 30 AWG tinned copper conductors for enhanced conductivity.Voltage rating: 30 V.Minimum bend radius: 52 mm.Supports audio/video device.Supports up to a 4k resolution.Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal.Meets CE certification.Weight: 0.25 lbs..Comes with lifetime warranty.HP® 6' Black standard power cord has IEC C13 connector on first end and NEMA 5-15 connector on second end. Offers reliable performance.

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

Active converter cable saves upgrade cost by connecting your DVI computer to a VGA monitor or projector. For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL)..Snagless design protects clips when plugging and unplugging.Standard RJ45 connectors and unshielded twisted pair wires.Color: Black.PoE (Power Over Ethernet).Warranty Type: Lifetime.Cable Length: 3 ft.Wire Gauge: 24 AWG.RJ-45 Male to RJ-45 Male

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..This patch cable is perfect for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications.Designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk; comes in blue.50 cables per pack.Supports 10 Gigabit Ethernet networks up to 180' for fast data transmission and maximum performance and 1 Gigabit Ethernet networks up to 328'.Snagless connector design for high-density environments and protecting the RJ45 connector's lock.Meets or exceeds the EIA/TIA TSB-40 CAT-6 standards.Cable length is 10'

The C2G® 03044 DB9-to-DB9 female/female null modem cable in beige color, allows two DTE or DCE devices to communicate with no conflict in data transmission. This cable measuring 6' is foil shielded for EMI/RFI protection from surrounding office equipment and fluorescent lights. The crossed transmit and receive signals ensures the proper data transmission..Modem cable communicate with no conflict in data transmission.Cable length: 6'.Connections: DB9 female to DB9 female.Wired connectivity.Copper conductor.Transmit and receive signals are crossed to ensure proper data transmission.Each null modem cable is designed with a rugged, over molded construction that provides added strain relief and a solid connection each time.Cable is foil shielded for EMI/RFI protection from surrounding office equipment and fluorescent lights.Thumbscrew connectors provide a fast, easy connection every time.Weight: 0.26 lbs..Comes with lifetime warranty.Beige 6' modem cable is designed with a rugged, over molded construction that provides added strain relief and a solid connection each time.

For fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat5e TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..For Data Networking - 1 x 1000Base-SX - 62.5/125 µm Optical Fiber1 Gbit/s.Color: Black.Product Type: SFP Transceiver.Interfaces/Ports: 1 x 1000Base-SX.Lifetime warranty

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Offers a reliable network connectivity.Features Category 6 cable type.Protects the plug and socket from dust when plugged in

C2G ® CAT6 UTP Patch cable in blue color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 25' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 25' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in blue color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.67 lb.Comes with lifetime warranty.C2G ® 27145 25' Blue CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

10ft Cat6 Snagless Unshielded (UTP) Network Patch Cable - Red.Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Red

CAT-5e to conveniently connect network devices is capable of transmitting data at 100 Mbps..CAT-5e to conveniently connect network devices.Capable of transmitting data at 100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.6' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.20' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G® 7' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.7ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.178 lbs..Comes with lifetime warranty

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

The C2G® 3' male to male category 5e gray snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Snagless patch cable resists breakage.Cable length: 3'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 24 AWG stranded bare copper, Construction: Polycarbonate.Certifications and standards: Meets RoHS and Cat5e TIA/EIA standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.09 lbs..Comes with lifetime warranty.StarTech.com® HDDVIFM8IN 8" HDMI to DVI-D Cable adapter effectively routes video signal between DVI-D and HDMI devices. Supports 1920 x 1200 resolution video signal.

The C2G® 6' DisplayPort cable is perfect for high definition A/V connectivity from source to display. It has a 20-pin DisplayPort male connector on the first end and 20-pin DisplayPort female connector on the second end. Enjoy the best digital picture and video quality on your monitor or television by connecting it to your computer with a DisplayPort cable. This 28 AWG copper wire cable comes fully shielded to protect unwanted interference and delivers sharp, crystal-clear picture and sound. This cable support high bit rate with a bandwidth of 10.8 Gb/s and also resolutions up to 4k for superior video quality..DisplayPort for Audio/Video Device.6.50 ft.1 x DisplayPort Male Digital Audio/Video.Shielding.Black.Features 28 AWG copper conductor for enhanced conductivity.Supports audio/video device.Data transfer rate: 10.8 Gbps.Support resolutions up to 4k, 4096 x 2160.Weight: 0.35 lbs..Comes with lifetime warranty.The 6' white StarTech PXT101NB6W Laptop Power Cord with a rating of 125 V is suitable for charging notebooks.

Category 5e.7.5in.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Experience a simpler way to connect devices with the entire business network.Features Category 6 cable type.Features Snagless.Features 1 x RJ-45 Male Network connector, permitting you to establish a connection with a network device

C2G® CAT5E UTP Patch cable in blue color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 25' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. H-D PE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet network..Enhanced Category 5 high-speed cabling to distribute data, voice and video.These cables will handle bandwidth intensive applications up to 350 MHz and beyond.Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 MHz wire.1 x RJ-45 Male Network to 1 x RJ-45 Male Network

C2G® 10' Cat6 STP network patch cable in blue color has RJ-45 male/male connectors on first and second end. Cable will handle bandwidth-intensive applications such as datA/Voice and minimizes both impedance and structural return loss..Blue.Cable type: Category 6.Cable length: 10'.Material: Hood: Molded PVC, Housing: Polycarbonate, Jacket: PVC, Shielding: Copper, aluminum, Insulation: FM-PE.Connector details: 1 x RJ-45 male network on first and second end.Connector plating: 50 micron gold plated, Shell: Nickel plated for shielding, Technology: Unshielded twisted pair (UTP).Conductor: Copper, Conductor size: 26 AWG (7/0.16) (bare copper), Wiring scheme: 568B.Features: Molded, stranded, snagless, minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Rating: 75 deg C.Dimensions: 15.1(H) x 11.6(W) x 38.2(D).Protect from EMI/RFI interference; connect network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking applications in high noise environments.Certification and Standards: Meets all ANSI/TIA 568 C.2 Cat6, UL94V-0.Weight: 0.322 lbs..Warranty: Lifetime limited.C2G® 10' Cat6 STP network patch cable in blue color features RJ-45 male/male connectors and saves high-speed network from noise and electromagnetic interference.

The C2G® 6.6' digital video cable is perfect solution for desktop or home theater applications that requires connectivity between HDMI and DVI-D devices. It has HDMI digital audio/video connector on the first end and DVI video connector on the second end. This fully functional cable supports high resolution of up to 1080p for superior image quality. The gold-plated connectors resist corrosion and provide smooth error-free data transfer. This high bandwidth bi-directional cable connect an HDMI-enabled output device to a DVI-D display or a DVI-D output device to an HDMI-capable display..HDMI/DVI for Video Device.6.56 ft.HDMI Digital Audio/Video.DVI Video.Features aluminum foil braided shielding to minimize EMI/RFI interference.Features 30 AWG tinned copper conductor for enhanced conductivity.Connector on First End: 1 x HDMI (Type A) Male Digital Video.Connector on Second End: 1 x DVI-D (Single-Link) Male Digital Video.1um Gold plated for optimum signal transfer.Voltage rating: 30 V.Minimum bend radius: 82.5 mm.Temperature: 0 to 50 deg C operating, -25 to 85 deg C storage.Supports video device.Data transfer rate: 10.2 Gbps.Supports up to a 2560 x 1600 resolution.Insulation resistance: 100 Ohms.Nominal attenuation: 1 - 825 MHz - 8 dB, DC resistance: 300 V, Dielectric strength: 500 VAC/minute.RoHs Compliant.Weight: 0.241 lbs..Comes with lifetime warranty

Protect a high speed network from noise and electromagnetic interference when connecting with our Snagless Shielded Cat6 patch cable. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use..Features Category 6 cable type.Features Stranded.1 x RJ-45 Male Network offers a secure and reliable connection with a compatible network device.Certifications & Standards: UL94V-0

The C2G ® 3' white Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.Length: 3 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: White.Manufacturer Warranty: Limited lifetime warranty.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G High Speed HDMI with Ethernet Cable is perfect for home theater or desktop audio video applications requiring high speed HDMI features and video resolutions up to 4k (2160p). The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection for accessing interactive online content or updating device firmware. This fully-functional, high bandwidth cable is tested to perform at industry standards and is backed by a lifetime warranty. This cable can be utilized for network switch stacking with compatible equipment. Experience the latest HDMI features including 4K@50/60, (2160p), which is 4 times the clarity of 1080p/60 video resolution; 3D video, Deep Color and x.v. Color; Dolby True HD, DTS-HD Master Audio and up to 32 audio channels for a multi-dimensional immersive audio experience; Up to 1536kHz audio sample frequency for the highest audio fidelity; Simultaneous delivery of dual video streams to multiple users on the same screen; Simultaneous delivery of multi-stream audio to multiple users (up to 4); Support for the wide angle theatrical 21:9 video aspect ratio; Dynamic synchronization of video and audio streams; CEC extensions for control of consumer electronics devices through a single control point. Note: To utilize HDMI stacking for network equipment all attached equipment must use the same firmware. Both the source device and display must support a HDMI feature in order to pass that feature through this cable..This cable is perfect for connecting your hdmi-compatible devices.8' length 30 AWG cable.HDMI to HDMI (Male to Male) connectors.PVC jacket protects the conductor from environmental factors.Gold-plated connectors for the highest signal transfer rate.Meets or exceeds RoHS standard.Lifetime manufacturer limited warranty.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

C2G® 25' RS232 - DB9 Null modem cable is fully shielded to prevent unwanted EMI/RFI interference and features low profile connectors. Cable comes with a rounded shape that accommodates smaller monitor mounts..Low-profile connector length: 1 1/4", Cable length: 25'.Cable type: Serial.Connectors: 1 x DB-9 female serial on first end, 1 x DB-9 female serial on second end.Conductor: Copper.Jacket type: CMG, FT4.Certifications and standards: RoHS.Weight: 0.675 lbs..Warranty: Lifetime limited.C2G® 25' RS232 - DB9 Null modem cable has molded cable design that delivers excellent strain relief and is designed to support RS-232/Serial communications.

Belkin secure KVM combo cable is the easiest and neatest way to connect all your computers and servers to your KVM switches, providing image clarity for high-resolution applications as well as audio and USB connections. Every Belkin secure KVM cable kit features high retention gold-plated connectors and a black jacket. Belkin secure combo cable kits add high-performance, high-quality, and reliability to the SKVM application..Combo cable kit is great for connecting computers and servers to KVM switcher.Source side: 2 x DisplayPort 1.2a 20-pin (male), 4-pin USB Type-A, and mini-phone 3.5mm audio.KVM side: 2 x DisplayPort 1.2a, 20-pin (male), 4-pin USB Type-B, and mini phone (3.5mm) audio connector.Cable length is 72".No power required for this passive cable.Supports video up to 4K at 30Hz.Supports audio via 3.5mm plug.Supports USB for keyboard and mouse.High-retention connectors as standard.3-year manufacturer limited warranty

Belkin secure KVM combo cable is the easiest and neatest way to connect all your computers and servers to your KVM switches, providing image clarity for high-resolution applications as well as audio and USB connections. Every Belkin secure KVM cable kit features high retention gold-plated connectors and a black jacket. Belkin secure combo cable kits add high-performance, high-quality, and reliability to the SKVM application..Combo cable kit is great for connecting computers and servers to KVM switcher.Source side: 1 x DisplayPort 20-pin male, 4 pin USB Type-B, and mini-phone 3.5 mm.KVM side: 1 x DisplayPort (20-pin, male), 4-pin USB Type-A, and mini phone (3.5mm) connector.Cable length is 72".No power required for this passive cable.Supports video up to 4K at 30Hz.Supports audio via 3.5mm plug.Supports USB for keyboard and mouse.High-retention connectors as standard.3-year manufacturer limited warranty

Belkin secure KVM combo cable is the easiest and neatest way to connect all your computers and servers to your KVM switches, providing image clarity for high-resolution applications as well as audio and USB connections. Every Belkin secure KVM cable kit features high retention gold-plated connectors and a black jacket. Belkin secure combo cable kits add high-performance, high-quality, and reliability to the SKVM application..Combo cable kit is great for connecting computers and servers to KVM switcher.Source side: 2 x DisplayPort 1.2a 20-pin (male), 4-pin USB Type-A, and mini-phone 3.5mm audio.KVM side: 2 x DisplayPort 1.2a, 20-pin (male), 4-pin USB Type-B, and mini phone (3.5mm) audio connector.Cable length: 120".No power required for this passive cable.Supports video up to 4K at 30Hz.Supports audio via 3.5mm plug.Supports USB for keyboard and mouse.High-retention connectors as standard.3-year manufacturer limited warranty

C2G 3' Value series™ One 3.5 mm stereo male to two RCA stereo male Y cable has fully molded connectors which render strain relief for durability. Y cable has brass or nickel plated plugs connected to 26 AWG spiral wrapped wire having copper shield..Mini-phone/RCA.Cable splits an audio signal or adapts from one connection to another to meet the application needs.3'.Material: Copper shielding, brass connector.Connector on first end: 1 x mini phone male stereo audio.Connector on second end: 2 x RCA male stereo audio.Device supported: Audio device.Conductor: Copper.Connector: 3.5mm stereo male, RCA stereo audio male.Cost effective cable is quality made to deliver crisp, clear sound for less.Brass/nickel plated plugs connect to 26 AWG spiral wrapped copper shielded wire.Dual conductor is shielded to protect against EMI/RFI interference.Connectors are fully molded to provide excellent strain relief for durable use.Connector plating: Nickel plated.Warranty: Lifetime limited.Certification and Standards: RoHS.C2G Value series™ One 3.5 mm stereo male to two RCA stereo male Y cable measures 3' and is used to adapt an audio signal from one connection to another based on the application.

The C2G ® 6.6' type-A USB/type-B micro USB male/male data transfer cable is perfect for cell phones, GPS systems, PDAs and digital cameras. It offers transfer speed up to 480 Mbps and is compliant with USB 2.0 specifications. This cable is perfect to charge and synchronize many cell phones..Cable length: 6.6'.Connections: USB to USB.Interface: USB 2.0.Interface: USB 2.0.First end connection: one 4-pin type-A USB male.Second end connection: one 5-pin type-B micro USB male on first end.Compatible with cellphones, GPS systems, PDAs and digital camerasCopper conductor for better electrical conductivity.Perfect to charge and sync many cell phones.Great replacement or spare cable and is available in lengths up to 3 m.Small form factor is suitable for today's compact portable devices for transferring data or charging your device easily.RoHS Compliant.Weight: 0.18 lbs..Comes with lifetime warranty

HDMI to DVI-D cable for smooth signal transfer..Gold-plated Type A male HDMI and single-link male DVI-D connectors for corrosion resistance.PVC jacket maintains the integrity of the signals.3.3' cable for convenient installation.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

This cable is an ideal solution for connecting the DisplayPort output of a laptop to a computer monitor which accepts a DisplayPort input. This cable carries a digital audio/video signal and the connectors feature latches which secure the cable in the port. Support of a High Bit Rate (HBR) bandwidth means that this cable can carry up to a 8K UHD (7680 x 4320) resolution. This cable meets the requirements of high performance applications..DisplayPort to DisplayPort cable for smooth signal transfer.20-pin male DisplayPort and 20-pin male DisplayPort connectors ensure lag-free transmission.PVC jacket maintains the integrity of the signals.6' cable for convenient installation.Comes with a lifetime limited warranty.Heavy-duty power cord supports up to 250 V.Flexible 32AWG wire for easy routing.Certifications and standards: UL Listed, RoHS.Warranty: Lifetime limited

The Select High Speed HDMI Cable with Ethernet is the perfect solution for connecting multimedia source devices in home theater, desktop or commercial audio video applications requiring high speed HDMI features. The CL2 rated cable jacket is designed to meet the requirements for in-wall installations. The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection. This cable can be utilized with network switch stacking..This A/V Cable provides splendid performance and clear connectivity.With HDMI, transfer high-quality pictures and 3D sound effects simultaneously at a high-speed.Device Supported: Home Theater System, Audio/Video Device.Certifications & Standards: UL

Tripp Lite 2M Fiber optic duplex patch cable in aqua color allows serial transmission over extended distances in 850 nm wavelength window. Cable features high-speed parallel interconnects for head-ends, central offices and data centers..Aqua.Fiber optic LC Male/LC Male.Ideal for fiber-channel (SAN) applications.6'.Applications: Computer networking (fiber).Core/cladding diameter: 50/125 microm.Tripp Lite 2M Fiber optic duplex patch cable in aqua color is designed to use with 10GB Ethernet applications and has zero halogen aqua jackets.

DisplayPort is a digital display interface standard put forth by the Video Electronics Standards Association (VESA). It defines a digital audio/video interconnect intended to be used between computer and display monitors, or computers and home theater systems. Similar to HDMI, in that it supports both Digital Video/Audio signals, DisplayPort is geared more toward the computer market, where HDMI dominates the Home Theater market. Tripp Lite's 15 ft. DisplayPort Cable with Latches support a maximum bandwidth of 10.8 Gbps, as well as DPCP (DisplayPort Content Protection), HDCP and Ultra High Definition (UHD) 4K x 2K video resolutions up to 3840 x 2160 @ 60Hz, including 1080p..M/M.Digital video & audio in one cable.Small footprint compared to VGA to DVI.Supports Ultra High Definition (UHD) 4K x 2K video resolutions up to 3840 x 2160 @ 60Hz, including 1080p.Support a maximum bandwidth of 10.8 Gbps.Supports resolutions up to 2560 x 1600 at 60 Hz, 1920 x 1200 at 120 Hz, including 1080p.Supports high definition content protection.Supports Displayport v1.2.Meets Video Electronics Standards Association standards.Comes with lifetime limited warranty

The C2G Performance Series Ultra Flexible High Speed HDMI Cable is perfect for connecting a wide variety of devices from computers to projectors and monitors, AV presentation furniture, or in-wall applications requiring high speed HDMI features and video resolutions up to 4k (4096 x 2160) at 60Hz - perfect for conference rooms, classrooms, churches, and other commercial installations. This Ultra Flexible High Speed HDMI Cable was designed for installations in tight spaces and offers commercial grade connectors that feature compact overmolding for high density environments, integrated finger grips on the top, bottom, and sides, for easy insertion and removal, and the gripping connector shell has 2x greater port retention to keep your devices connected. The gold plated connectors on the cable allow for better shielding, increased electrical conductivity, and durability. This Ultra Flexible High Speed HDMI Cable supports the updated library of Consumer Electronic Control (CEC) commands, allowing communication between devices connected through the HDMI ports. Lastly, this fully-functional, high bandwidth cable has been tested to perform at industry standards..Audio/video cable with HDMI interface.Cable length: 6'.HDMI (19-pin) to HDMI (19-pin) connectors.Black cable with PVC jacket to protect this cable from environmental factors.Compatible with your monitor.Meets or exceeds RoHS two (2011/65/EU) and CEC CMG FT4 standards.Lifetime manufacturer limited warranty

The C2G® 6' black adapter cable is a perfect solution for connecting the mini DisplayPort or Thunderbolt™ output of a small laptop or tablet to a monitor or other display, which accepts a DisplayPort input. It has a mini DisplayPort male DisplayPort 1.2 digital audio/video connector on first end and DisplayPort male DisplayPort 1.2 digital audio/video connector on the second end. This adapter cable carries a digital audio/video signal and supports up to 4k resolution for superior video quality. It meets the requirements of high performance applications. This cable is suitable for conference rooms, corporate offices and home offices..Adapter cable is suitable for connecting the Mini DisplayPort or Thunderbolt output of a small laptop or tablet to a computer monitor.Cable length: 6'.Has mini DisplayPort male digital audio/video connector on first end and 20-pin DisplayPort male digital audio/video connector on second end.PVC jacket offers protection against corrosive environment.Features aluminum foil wrap braided shielding and foam-polyethylene insulation to minimize EMI/RFI interference.Features two 30 AWG tinned copper conductors for enhanced conductivity.Voltage rating: 30 V.Minimum bend radius: 52 mm.Supports audio/video device.Supports up to a 4k resolution.Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal.Meets CE certification.Weight: 0.17 lbs..Comes with lifetime warranty

The 10ft (3m) USB-C to C 2.0 Male to Male Cable is the ultimate solution for connecting your USB-C enabled devices for fast charging and data transfer. With a 5A charging output and data transfer speeds up to 480 Mbps, this cable ensures your devices stay powered and synced effortlessly. Its reversible USB-C connectors make it easy to plug in, while the durable PVC jacket and stranded copper conductors provide reliable performance. Compatible with Apple® and Microsoft® Surface® devices, this high-quality cable offers versatility and longevity with a lifetime warranty..The USB-C to C 2.0 Male to Male Cable is ideal for connecting devices like laptops, tablets, and smartphones for charging and data transfer. It is perfect for use with Apple®, Microsoft® Surface®, and other USB-C enabled devices..This cable has a length of 10 feet (3 meters), providing ample reach for connecting devices in various settings..It features USB-C Male connectors on both ends, providing a stable connection for charging and data transfer. The connectors are symmetrical for a reversible, hassle-free plug-in..The cable is built with 30 AWG wire gauge and is made of PVC jacket material. It uses stranded copper for conductors, offering durability and effective data transmission. The true color is black..While this cable is primarily for charging and data transfer, it also supports video input and output via USB-C, allowing for media sharing across devices..Connector 1: USB-C Male Connector 2: USB-C Male.The cable supports data transfer speeds of up to 480 Mbps, allowing for quick and efficient file sharing between devices..Compatible with Apple® iPad Pro®, MacBook®, MacBook Air®, and MacBook Pro®. It also works with the Microsoft® Surface® Book 2, Surface Go, and other USB-C enabled devices..This cable complies with the USB 2.0 standard and is RoHS compliant, ensuring it meets environmental and safety regulations..The product comes with a lifetime warranty, ensuring long-term reliability and support.