Manual Sit And Stand Desks

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Add movement to your working day by converting your traditional desk or table into a dynamic sit-stand desk instantly with this Mount-It! extra-wide sit-stand desk converter. Alternating your position between sitting and standing throughout the day can help you work healthier and increase productivity. The extra-large 48" x 23" top platform is suitable to hold two screens side by side, and with the included dual-monitor mount you can position your screens at your preferred height and angle. Thanks to its gas spring technology, this standing desk converter can be easily adjusted to your preferred height between 6" and 19.25" by holding down the lever. Rubber foot pads prevent skids and scratches..Turn your traditional desk into an active multiscreen sit-stand workstation with this standing desk converter.The gas spring lift mechanism allows you to raise and lower to any height between 5.9" and 19.3" effortlessly in just seconds.Large, extra wide 47" x 23" platform with built-in device channel to securely hold your tablet or smartphone.Includes a dual monitor mount for screen sizes from 13" to 27".The desk converter supports up to 33 lbs. of evenly distributed weight, and each monitor arm supports up to 22 lbs. per screen..The design meets or exceeds ANSI/BIFMA standards for durability, stability, and safety..The monitor arm is constructed from durable steel for long-term reliability and support..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Turn Any Desk into an Ergonomic Dual-Monitor Sit-Stand PowerStation!

Elevate your workspace effortlessly with our versatile desk converter, designed to seamlessly transition your traditional desk into a dynamic sit-stand workstation. Its compact base maximizes your available space, while the generously sized keyboard tray ensures comfort for extended typing sessions. Accommodating two screens up to 32 in and weighing up to 22 lbs. each, the included monitor mount offers flexibility and adaptability to your setup and is compatible with VESA 75x75 and 100x100. Thanks to gas spring lift technology, adjusting your position is swift and comfortable. Experience ergonomic typing supported by a soft gel wrist pad, while the integrated cable management system keeps your cords organized and your workspace clutter-free. With a height range from 5.7" to 17.1", this converter transforms your desk into a hub of productivity and wellness..Transform your conventional desk into a productive sit-stand workstation with ease.Maximize space with its compact footprint, while the spacious keyboard tray comfortably fits your keyboard and mouse.The included monitor mount supports two screens up to 32" and 22lbs each.Enjoy quick and comfortable position adjustments thanks to gas spring lift technology.Experience ergonomic typing with the soft gel wrist pad and keep cords tidy with the integrated cable management system.This monitor mount supports screens up to 32" and holds up to 22 lbs. per screen..VESA compatible mount: 75 x 75 and 100 x 100.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.MI-7914 provides you a easy, quick, affordable way to switch position from sit to stand which keeps you from sitting too long while working and allows you to work in an ergonomic standing position.

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Modesty panel (steel).Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials

The MI-7934 sit-stand desk converter will turn your desk into an ergonomic workspace and can hold two monitors to maximize your efficiency. The adjustable dual monitor mount allows you to position the screens to fit your needs. Reduce eye strain and glare by tilting the monitors to find the perfect angle. Rotate your screens between landscape and portrait to suit your working needs. The large surface holds all your office essentials. Nonskid pads helps protect your desk from scratches. Integrated cable management keeps your desk tidy and organized..EASY HEIGHT ADJUSTMENT: Sit to stand in seconds with this standing desk converter. The gas spring mechanism allows for smooth up and down height adjustments from 6.5" to 16.3", allowing you to find the perfect height. Comes with 8 preset height levels..COMES WITH DUAL MONITOR MOUNT: Includes a sturdy dual monitor mount that supports monitors from 13" up to 32" in size and 17.6 lbs for each arm. The desk converter supports a maximum total weight of 33 lbs. Supports standard 75x75mm or 100x100mm VESA patterns.FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 90 degrees, swivel left-right 180 degrees, and rotate 360 degrees, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another.DIMENSIONS: (Top Surface): 36.25" x 22"; (Keyboard Tray): 26.9" x 9".EASY ASSEMBLY: Start enjoying the benefits right away. Simply pull your adjustable standing desk out of the box and attach the ergonomically placed keyboard tray using the included hardware. Conveniently attach or detach the included monitor mount using the c-clamp base.HELPS WITH ORGANIZATION: Cable clips as well as tool storage slot and built-in tray keep your workspace in order.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Designed to meet or exceed ANSI/BIFMA standard.Mount-It! Standing Desk Converter with Dual Monitor Mount (MI-7934)

Rolling Workstation Lets You Enjoy the Benefits of Standing During Your Workday: This WorkWise mobile workstation desk on wheels lets you enjoy the benefits of better workspace ergonomics. Standing for part of the day can help increase metabolism, improve alertness and productivity, reduce fatigue and decrease the risk of repetitive stress injuries. Recommended for home, school or office use, the WWSSRC adjusts in height from 32 to 49 inches, allowing you to customize it to your comfort level. Take Your Work Wherever You Need to Go: This standing desk rests on four heavy-duty locking casters that allow you to roll the unit from room to room. Ideal for transporting a lesson plan from one classroom to the next or updating medical histories in a clinic filled with examination rooms, the WWSSRC allows you to go where the work takes you. Because it takes up less space than many popular computer desks, the WWSSRC is also ideal for small home offices. Convenient Shelves Keep Your Work Hardware Organized: This adjustable-height desk on wheels includes four platforms for holding a monitor, laptop, keyboard, CPU, printer, PDU, audio speakers or any other device needed for day-to-day operation. Each shelf supports up to 33 pounds..Promotes wellness through alternating between sitting and standing throughout the day.Height adjustable from 32-49 in. to let you match your own comfort level.4 locking casters allow you to roll your entire workstation from room to room.4 shelves for monitor, printer and other essential devices support up to 33 lb. each.Standing desk on wheels is recommended for school, office or home use

Built with a gas spring height adjustment, the Lotus™LT Standing Desk Converter allows you to comfortably sit or stand while working, with 15.5" of maximum height adjustment. A spacious top platform holds two monitors or a monitor and laptop, while the bottom level perfectly accommodates a keyboard and mouse. Keep your phone or other accessories within reach with a convenient device channel on the top platform. This standing desk converter arrives fully assembled – no complicated instructions, no mounting. Simply unpack your Lotus™ Standing Desk Converter and get started..Work comfortably sitting or standing with the height adjustment range from 4.38" to 15.5".Spacious top platform holds two monitors or a monitor and laptop; and the bottom level perfectly accommodates a keyboard and mouse.Keep your phone or other accessories within reach with the convenient device channel on the top platform.Arrives fully assembled: no complicated instructions, no mounting, just unpack and get started.Compatible with our Sit-Stand Single and Dual Monitor Arm Kit.Meets or exceeds BIFMA standard.Weight capacity: 35.1 lbs.Dimensions: 15.5"H x 31.5"W x 24.2"D.3-year manufacturer limited warranty.Easily transition from sitting to standing with the Lotus™ LT Standing Desk Converter.

Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program

Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program

Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program

Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program

Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program

Mobile Standing Desk - Portable Sit Stand Ergonomic Height Adjustable Cart on Wheels - Rolling Computer/Laptop Workstation Table with Locking One-Touch Lift for Teacher/Student (STSCART2).HEIGHT ADJUSTABLE: Easily lift the worksurface of the ergonomic laptop computer desk to standing position with the one-touch lever-controlled adjustable height ranging 29" to 45" from the floor.LARGE STURDY SURFACE: Rolling sit-stand desk with wheels has a large black surface (24x31.5"); Unassisted lift capacity of 11lb (5kg) & max static weight of 66lb (30kg); Easily wiped clean.MOBILE STANDING DESK: Portable sit-stand cart is easily movable & fosters a productive workplace/learning environment; Stable base w/ heavy-duty casters that can be locked (front only) w/ foot pedal.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This mobile workstation is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.THOUGHTFUL DESIGN: Surface has beveled edge to relieve pressure on forearms; Lever positioned to prevent accidental height adjustments; V-shaped base for more foot room; incl. required setup tools.Ergonomic Mobile Workstation | Height Adjustable | Portable Rolling Desk

Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program