Monitor Desk Arms

The Fellowes® Depth Adjustable Monitor Arm adjusts easily in every way for optimum viewing control. Easy to mount – clamp attaches to desktop or through grommet hole. Elevates LCD monitors from 3-½” to 16-½” above the desk. Minimum reach of 2½” to a maximum reach of 21-½”. Tilts up or down +/- 37° and freely swings left or right (360° rotation capability). Mounts to surfaces up to 1-3” thick through grommet holes at least 3 1/4" in diameter; no tools required. Meets VESA mounting standards. Holds LCD monitor up to 24 lbs..Fully adjustable for optimum viewing control.Easy to mount - clamp attaches to desktops 1-3” thick or through grommet holes at least 3-1/4” in diameter.Elevates monitors from 3-1/2” to 16-1/2” above the desk with a reach of 2-1/2”-27”.Tilts up or down +/-37° and freely swings left or right (360° rotation capability).Holds flat panel monitors up to 24 lbs..Meets VESA mounting standards.Dimensions: 21"H x 4.38"W x 24"D.Limited lifetime warranty.Holds a monitor up to 24 lbs.

Create your perfect immersive gaming station or a professional multiscreen desk setup with this Mount-It! desk mount for monitors with screen size up to 49" and weight up to 44 lbs., such as Samsung Odyssey G9 and LG 49" UltraWide Dual QHD. The mount's optimized heavy-duty tilting and gas spring mechanisms allow for smooth and stable adjustment of large screens. The full-motion design enables you to lower and raise, swivel, tilt, and rotate your screens to achieve the perfect viewing height and angle. To fully immerse in your game, this mount features RGB lighting along the arms and on the base: simply switch between 20 different modes by pressing the easily accessible RGB mode button on the base. Both, a clamp and grommet mount are included for easy installation on your desk. The detachable VESA plate with 75 x 75 and 100 x 100 hole patterns allows for quick installation of your monitors, and the integrated cable management ensures neat and organized cable routing along the arms..Create your perfect immersive gaming station with this heavy-duty single monitor arm.Fits one ultrawide and/or curved screen up to 49" and 44 lbs., such as Samsung Odyssey G9 and LG 49" UltraWide Dual QHD IPS Curved.Height-adjustable from 8.54" to 19.68".Made of aluminum and steel in a combination of grayish white and matte black finishes.Full-motion design with a 360-degree screen rotation, 180-degree swivel, and tilt up to +50/-20 degrees ensures you get the optimal viewing angle.Base dimensions: 5.5"W x 4.5"D.Compatible with 75 x 75 and 100 x 100 VESA patterns.Powerful gas spring arms offer a smooth and stable adjustment with a maximum extension of 18".Integrated USB-powered RGB lighting with 20 different effects enhances any gaming station.Built-in cable management allows you to route the cable underneath the arm for a clean and organized workspace.Extra-sturdy clamp and grommet mounting options included (recommended tabletop thickness: 0.39"-3.34" for clamp and 0.39"-1.88" for grommet).1-year manufacturer limited warranty

M8.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M8.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M8.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M8.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M8.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M8.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..In today’s fast-paced, agile work environment, there’s no time for discomfort. M8.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M8.1 meets a variety of configuration needs for single monitors from 6 to 28 pounds or – with an optional crossbar support – dual monitors up to 12 pounds each. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M8.1 enables the personalization and flexibility needed for today’s evolving workplaces.

Maximize your workspace and comfort with the Fellowes Professional Series Freestanding Dual Stacking Monitor Arm. Designed to support two monitors up to 32 inches and 17.6 lbs each, this freestanding solution is ideal for environments where clamp or grommet mounting isn't possible. Its vertical stacking design saves valuable desk space while promoting ergonomic viewing to reduce eye, neck, and shoulder strain. The low-profile, weighted base ensures stability, and the integrated cable management system keeps your setup clean and organized. Perfect for professional settings that demand both flexibility and functionality..Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount.Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain.Save space in tight workspaces with a dual stacked position.Low profile, weighted base provides enhanced stability.Minimize clutter with the intuitive cord management system.Holds 32” monitors up to 17.6 lbs..Meets VESA mounting standards.Dimensions: 35.5"H x 15.31"W x 11"D.3-year manufacturer limited warranty

Find your best view, save desk space and discover your most productive self with the LX Adjustable Monitor Arm. This monitor mount lets you position up to 40" screens how you want for a new level of flexible working. Place your screen where you need it for each project, and then reclaim a space full of opportunities by folding the arm and pushing it aside during a much-needed screen break..Device Supported: Monitor.Maximum Load Capacity: 40 lb..Number of Displays Supported: 2.Made of aluminum.75-degree tilt, 75-degree pan, and 75-degree rotation adjustment options enable optimal viewing.Weighs 19lbs..Dimensions: 22"H.Compatible with: VESA mounting patterns.Comes in white.10-year manufacturer limited warranty

Whether you are working from home or in an office, this monitor stand with spring assisted arm allows you to adjust your monitor height to your personal ergonomic viewing position. It comes with a stable, freestanding base which means you can easily place it anywhere without having to worry about clamp or grommet mounting. The monitor stand fits screens between 17" and 32" in size with a weight between 4.4 and 17.6 lbs. and comes with a quick release VESA plate (75x75 & 100x100) for easy installation. If you ever want to turn your screen to share it or reduce glare, the integrated swivel feature allows for up to 25° turning left and right. The screen itself can be rotated 180° left and right so that you can view it in horizontal as well as vertical orientation. Keep your cords organized and your workplace neat with the integrated cable management..This freestanding monitor arm with stable base allows you to adjust the height of your screen and achieve an ergonomic viewing experience.The stand supports a single monitor between 17" to 32" in size, including curved screens..The monitor height can be adjusted up to a maximum of 20.6 inches..This monitor arm is black in color and made from steel for durability..The mount allows for ±25° swivel, +10°/-15° tilt, ±180° screen rotation and pivot, and provides a wide viewing angle of up to 180°..The assembled dimensions are 20.6 inches in height, 10.6 inches in width, and 7.9 inches in depth..It is compatible with VESA mounting patterns of 75x75mm and 100x100mm..An integrated cable management system keeps your cords organized and the quick release VESA plate ensures easy monitor installation.Perfect for office and home use.Supported by Limited Lifetime Warranty.Work Comfortably with Effortless Monitor Height Adjustments, Quick and Simple Monitor Positioning, No Clamp Needed

M2.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to patent-pending Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M2.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M2.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M2.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M2.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M2.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..M2.1 is compatible with Humanscale’s revolutionary docking station, M/Connect 3, to eliminate desktop cables and provide a more streamlined workspace. It is also compatible with M/Power – a USB Type-A and Type-C charging station that offers convenient, high-speed charging for personal devices..In today’s fast-paced, agile work environment, there’s no time for discomfort. M2.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M2.1 meets a variety of configuration needs for lighter monitors up to 15.5 lbs. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M2.1 enables the personalization and flexibility needed for today’s evolving workplaces.

This crossbar monitor desk mount is designed to support up to two 27-inch displays, creating an ergonomic multi-monitor setup that provides an extensive viewing area for productivity. The built-in handle enables moving all monitors simultaneously, while the spring-assisted arm enables multiple adjustments to suit different ergonomic needs. Height Adjustment with One Smooth Motion The mechanical spring arm enables toolless height adjustment of up to 12.9in (32.7cm) with effortless one-touch motion. The maximum arm extension is 22.6in (57.4cm) and a total weigh capacity of 33lb (15kg). Visual Experience This monitor mount is ideal for bezel-less or slim bezel displays, creating a more extensive and seamless viewing experience that enhances multitasking and productivity. The VESA mounts can slide along the crossbar, allowing for further adjustments..The monitor arm is ideal for bezel-less or slim bezel displays, creating a more extensive and seamless viewing experience that enhances multitasking and productivity.Supports monitors up to 27 inches and features two arms for dual monitor setup..Has an adjustable height range from 7.9 inches to 20.8 inches..Black Aluminum.Offers a range of articulation options to ensure optimal positioning and viewing comfort: Pivot Angle: 180 degrees Tilt Angle: -90 to +85 degrees Rotation Angle: 360 degrees Swivel Angle: 180 degrees Viewing Angle: Adjustable to suit your needs.Weighs approximately 13.2 pounds..Dimensions: Height: 20.8 inches Width: 31.2 inches Length : 25.2.Compatible with the VESA mount pattern. It supports both 75x75mm and 100x100mm VESA configurations, allowing for versatile mounting options for your monitors..It is compliant with TAA (Trade Agreements Act) requirements.

The Tripp Lite DDR1327SFC full-motion flex-arm desk clamp with unique design, accommodates 13" - 27" monitors. This black clamp enhances desk/table space in office workstation applications. The +/- 15 deg tilt adjustment offers optimum viewing experience. It has all-metal frame construction with scratch-resistant, powder-coat finish for enhanced durability..Full motion flex arm desk clamp is ideal for monitors.Screen size: 13" - 27", Load capacity: 22 lbs..Made of steel for durability.Dimensions: 14.37"H x 6.29"W x 16.92"D.Tilt: - 15/+ 15 deg.VESA mounting standard: 75 x 75mm, 100 x 100mm.Desk clamp mounting for office workstation applications.Full motion desk clamp for any angle view.Frees up valuable space in your workstation and increases workday productivity and has unique flexible design for exceptional range of motion.Features durable all-metal frame with scratch-resistant, powder-coat finish that combat the stress of repeated use and blends easily into any decor.Offers convenient one-touch display adjustment with tilt, swivel and rotation capabilities.Maximum clamping range is 3.54".Contains all necessary mounting hardware.RoHS Compliant.Contains DDR1327SFC flex arm dual flat-screen desk clamp, mounting hardware and owner's manual.Comes with 5 years warranty

This computer monitor desk mount is height adjustable and can swivel and tilt to help position your monitor at the ideal position. Simple, yet elegant, this clamp-type mount will provide an ergonomic monitor installation. Its universal mounting plate ensures compatibility with virtually all the monitors in the market. High Quality MI-706 is one of Mount-It!’s most durable, single monitor mounts that will assist you with creating open desk space and functionality. This adjustable mount is perfect for anyone who wants to easily adjust their viewing height to an ergonomic level to help reduce neck, back and eye strain while opening up valuable desktop space. Features MI-706 made from heavy-duty steel and can carry up to 33 lbs. Black powder coat is elegant and scratch resistant. The sturdy C-clamp base allows you to conveniently attach it to any desk to maximize your work space, no need to drill holes. The heavy-duty C-clamp is adjustable and will fit desk thickness of up to 2" . MI-707 offers you the versatility of swivel your monitor 360 degrees and tilting it up to 12 degrees to provide you with the perfect ergonomic comfort level in any position. It also, comes with all of the necessary hardware and a manual for an easy installation. The mount height can be adjusted from 12" to 17" from the desk surface to the top of the mount. Compatibility MI-706 fits most flat screen monitor from 13" to 30" with the standard VESA pattern of 50x50, 75x75 and 100x100mm. To verify the VESA pattern of your monitor, locate the bolt holes behind it and verify the spacing. The standard pattern is approximately 2" x2" , 3" x3" or 4" x4" ..Height adjustable desk mount for 20"-30" monitors.5" of height adjustability and 360 degrees of rotation.Easy installation C-clamp for 1"-2".Supported by manufacturer's limited lifetime warranty.Mount-It! MI-707 makes your desk organized with the added improvement of monitor functionality.

Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount. Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain. The low profile, and weighted base provides enhanced stability. Minimize clutter with the intuitive cord management system. Holds 27” monitors up to 17.6 lbs. Meets VESA mounting standards..Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount.Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain.Low profile, weighted base provides enhanced stability.Minimize clutter with the intuitive cord management system.Holds 27" monitors up to 17.6 lbs..Meets VESA mounting standards.Dimensions: 19.50" H x 35.00" W x 11.00"D.3 Year Limited.Holds 27" monitors up to 17.6 lbs. - Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount.

The StarTech.com dual monitor mount in silver and black colors, features Interchangeable arms with quick connect for easy and flexible set-up. This mount offers to create dual monitor setup, side-by-side for up to 30" monitors or stacked for up to 24" monitors. Position your monitors at any desire angle using the full-motion arms with articulation and spring-assisted height adjustment. This stand features integrated cable management and rotates 360 deg for easy landscape-to-portrait screen rotation..Stackable dual monitor mount with full-motion arms.Steel, aluminum and plastic enclosure.Supports 30" display.Mounting surface thickness: desk clamp: 0.39 - 2.95", grommet clamp: 0.39 - 3.74".Number of displays supported: 2.One-touch height adjustment.Interchangeable arms with quick connect for easy and flexible set-up.Meets TAA standards.Includes 2-in-1 desk or grommet mount, M6 Allen key, M3 Allen key, base cushion, spring arm, thumb screws and instruction manual.Comes with 2 years warranty.Comes in black/silver.Rubber feet protect desk surface.2-year manufacturer limited warranty.Dual monitor mount with full-motion arms - stackable.

M8.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M8.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M8.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M8.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M8.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M8.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..In today’s fast-paced, agile work environment, there’s no time for discomfort. M8.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M8.1 meets a variety of configuration needs for single monitors from 6 to 28 pounds or – with an optional crossbar support – dual monitors up to 12 pounds each. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M8.1 enables the personalization and flexibility needed for today’s evolving workplaces.

The Atdec AWMS-6-13717 is a six-arm combination attached to a 29.5" post. Display height, optimal viewing angle, and orientation can be set to individual requirements. Built of lightweight yet durable aluminum, the mount can be easily recycled at the end of its life..Raise your monitor to a comfortable viewing height with this six-arm monitor mount.Supports six monitors up to 24" for versatile use.Comes in black and made of aluminum.-25 to 45-degree tilt and -90 to 90-degree pan adjustment options enable optimal viewing.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 20 lbs. or curved screens with maximum weight up to 17.6 lbs. per monitor.Modular, adaptable, and upgradeable design.10-year manufacturer limited warranty

The Platinum Series dual silver monitor arm from Fellowes provides ergonomic viewing to help relieve neck and eye strain while optimizing desk space. Fully independent arm holds up to 17.6 lbs. or 40” monitors and easily install using the Quick Fit VESA plate. The arm feature gas spring technology for effortless adjustment and rotate for horizontal or vertical viewing. Easily mounts to tables or desks via clamp (between .4”-3.35” thick) or grommet (between .33”-2.75” in diameter). Innovative cable management system reduces clutter keeping you productive..SUPPORTS: Supports dual monitors up to 40" and 17.6 lbs. each, perfect for home, office, or gaming setups..GAS SPRING TECHNOLOGY: Fully independent adjustable arms with gas spring technology offer 19.75" reach for increased workspace flexibility and ergonomic comfort..EASY INSTALLATION: Quick-Fit VESA plate ensures easy installation on tables or desks using either a clamp or grommet..USB PORTS: Integrated USB ports at the base provide convenient charging for your devices while you work..FULL MOTION: Full motion adjustability with 360° rotation and +/-45° tilt, plus integrated cable management, keeps your workspace tidy and optimized..WARRANTY: Extended 5 Year Limited Warranty.Elevate your workspace with the Fellowes Platinum Series dual monitor arm. This gas spring technology monitor arm is designed to create effortless adjustments while being functional and comfortable. It provides an ergonomic viewing experience while maximizing desk space.

The Platinum Series dual white monitor arm from Fellowes provides ergonomic viewing to help relieve neck and eye strain while optimizing desk space. The fully-independent arm holds up to 17.6 lbs. or 40” monitors and is easily installed using the Quick Fit VESA plate. The arm features gas spring technology for effortless adjustment and rotation for horizontal or vertical viewing. Easily mounts to tables or desks via clamp (between .4”-3.35” thick) or grommet (between .33”-2.75” in diameter). An innovative cable management system reduces clutter and keeps you productive..SUPPORTS: Supports dual monitors up to 40" and 17.6 lbs. each, perfect for home, office, or gaming setups..GAS SPRING TECHNOLOGY: Fully independent adjustable arms with gas spring technology offer 19.75" reach for increased workspace flexibility and ergonomic comfort..EASY INSTALLATION: Quick-Fit VESA plate ensures easy installation on tables or desks using either a clamp or grommet..USB PORTS: Integrated USB ports at the base provide convenient charging for your devices while you work..FULL MOTION: Full motion adjustability with 360° rotation and +/-45° tilt, plus integrated cable management, keeps your workspace tidy and optimized..WARRANTY: Extended 5 Year Limited Warranty.Elevate your workspace with the Fellowes Platinum Series dual monitor arm. This black gas spring technology monitor arm is designed to create effortless adjustments while being functional and comfortable. It provides an ergonomic viewing experience while maximizing desk space.

Elevate your monitor to maximize desk space and reduce eye, neck, and shoulder strain. This Fellowes monitor stand is fully height- and depth-adjustable for optimum viewing control and a cost-effective ergonomic solution. The monitor arm features a dual design with built-in cable management to keep you tangle-free. Easy install using the quick fit VESA plate with either a desk clamp (0.38”-3.5” thick ) and grommet (0.44”-2.75” diameter) mount included for secure and easy attachment options. The Reflex experience has seamless adjustability with 360° rotation, 180° swivel, and +/- 45° tilt for optimal viewing angles..MAXIMIZE PRODUCTIVITY: Free up valuable work space for maximum productivity and collaborate with colleagues effortlessly with the Reflex monitor arm.SUPPORTS: Dual monitors up to 30" and 17.6 lbs., optimizing desk space with ergonomic design ideal for home or office.ADJUSTABLE HEIGHT & DEPTH: This fully independent monitor mount by Fellowes is adjustable by height and depth to achieve optimum viewing control and a cost effective ergonomic solution which helps reduce your risk of eye, neck and back strain.EASY INSTALLATION: Effortless installation. Quick-fit VESA plate simplifies monitor installation, ensuring hassle-free setup on desks or tables using clamp or grommet options.GET RID OF YOUR CLUTTER: Reduce clutter in your workspace with the Reflex monitor arm which features an intuitive cable management system which helps keep your cables organized.SPACE-SAVING: Compact and efficient space-saving design to free up valuable workspace.WARRANTY: Extended 5 Year Limited Warranty

M2.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to patent-pending Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M2.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M2.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M2.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M2.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M2.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..M2.1 is compatible with Humanscale’s revolutionary docking station, M/Connect 3, to eliminate desktop cables and provide a more streamlined workspace. It is also compatible with M/Power – a USB Type-A and Type-C charging station that offers convenient, high-speed charging for personal devices..In today’s fast-paced, agile work environment, there’s no time for discomfort. M2.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M2.1 meets a variety of configuration needs for lighter monitors up to 15.5 lbs. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M2.1 enables the personalization and flexibility needed for today’s evolving workplaces.

M8.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M8.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M8.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M8.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M8.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M8.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..In today’s fast-paced, agile work environment, there’s no time for discomfort. M8.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M8.1 meets a variety of configuration needs for single monitors from 6 to 28 pounds or – with an optional crossbar support – dual monitors up to 12 pounds each. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M8.1 enables the personalization and flexibility needed for today’s evolving workplaces.

Create a customized viewing arrangement with this Staples TECH dual-monitor arm. The desk-mount design creates a stable base to support your computer monitors, and the two independent arms let you swivel, tilt, and adjust each screen for optimum comfort. This Staples TECH dual-monitor arm is compatible with displays measuring up to 30 inches, providing flexible options for setting up your computer and peripherals..Raise your monitor to a comfortable viewing height with this gas spring dual monitor arm with full motion swivel.Supports up to 30" monitors for versatile use.Tilt, swivel, and rotation functions enable adjustments for comfortable viewing.Each arm securely holds up to 19 lbs. to fit most monitors (38 lbs. total load on height-adjustment assembly).Compatible with standard VESA mounting patterns: 75 x 75, 100 x 100.Meets VESA MIS-D mounting standard.Two installation options: clamp to the desk or mount using a grommet hole.Black finish adds to its overall aesthetic appeal.Cable management features allow wires to move free.Give your computer setup an upgrade with this Staples TECH dual-monitor arm.

The Platinum Series dual black monitor arm 8042501 from Fellowes provides ergonomic viewing to help relieve neck and eye strain while optimizing desk space. The fully-independent arm holds up to 17.6 lbs. or 40” monitors and is easily installed using the Quick Fit VESA plate. The arm features gas spring technology for effortless adjustment and horizontal or vertical viewing rotation. Easily mounts to tables or desks via clamp (between .4”-3.35” thick) or grommet (between .33”-2.75” in diameter). An innovative cable management system reduces clutter and keeps you productive..SUPPORTS: Supports dual monitors up to 40" and 17.6 lbs. each, perfect for home, office, or gaming setups..GAS SPRING TECHNOLOGY: Fully independent adjustable arms with gas spring technology offer 19.75" reach for increased workspace flexibility and ergonomic comfort..EASY INSTALLATION: Quick-Fit VESA plate ensures easy installation on tables or desks using either a clamp or grommet..USB PORTS: Integrated USB ports at the base provide convenient charging for your devices while you work..FULL MOTION: Full motion adjustability with 360° rotation and +/-45° tilt, plus integrated cable management, keeps your workspace tidy and optimized..WARRANTY: Extended 5 Year Limited Warranty.Elevate your workspace with the Fellowes Platinum Series dual monitor arm. This black gas spring technology monitor arm is designed to create effortless adjustments while being functional and comfortable. It provides an ergonomic viewing experience while maximizing desk space.

MI-1771 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture. The monitor arm is compatible with VESA patterns (100x100 mm and 75 x 75 mm). If your monitor has mounting holes in the back, this mount will work with it..Single Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".40 lbs. Capacity.10-year manufacturer limited warranty

View multiple displays simultaneously with patented paraview technology.Aluminum and steel construction.Black finish.Desk stand.Position monitors for maximum productivity.Weight capacity: 31 lbs. (14 kg) per monitor, 124 lbs. (56 kg) total.Maximum outside width of display: 23 1/4" (59 cm).Mounting standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 mm x 100 mm & 75 mm x 75 mm).Low-profile base saves desk space.Accommodates various LCD sizes, slide displays into place so screen edges align.Height-adjustable bows.Includes base, 28" pole, 2 x Paraview bows, 4 x sliding brackets.Certifications & standards: Meets UL specification 1678 tip test.5 years warranty.Ergotron 33-324-200 conserves desk space by suspending four flat panels on a single base. Easily view multiple screens at once to increase productivity. DS100’s modular design allows customization to fit your needs.

Amer Mounts' AMR1UW is a heavy duty wall mount monitor arm designed for ultra wide/curved display monitor. The aluminum alloy can mount a single 26.46-41.89 lbs. flat monitor and 16.53-31.97 lbs. curved/ultrawide monitor (curvature: 1000R). It supports multi-angle adjustment, left and right angle can be adjusted by 180 degrees, tilting angle +/-20 degrees and up and down adjustable function of the arm. The VESA quick release function allows for quick removal and connection of displays..This heavy duty wall mount monitor arm designed for ultra wide/curved display monitors.Supports displays up to 49" of curved and standard panels.Features 17.17" height adjustment range.Comes in black and made of steel, aluminum alloy, plastic.It supports multi-angle adjustment, left and right angle can be adjusted by 180 degrees, tilting angle +20/-20 degrees and up and down adjustable function of the arm.Weight: 12.81 lbs..Dimensions: 21.69"H x 20.63"W x 19.56"D.Compatible with VESA 75 x 75, 100 x 100.The aluminum alloy can mount a single 26.46-41.89 lbs. flat monitor and 16.53-31.97 lbs. curved/ultrawide monitor (curvature:≥1000R).The VESA quick release function allows for quick removal and connection of displays.Cable management and M4 screws are includes.3-year manufacturer limited warranty

Mount two monitors side by side for easy viewing with this SIIG articulating dual-monitor desk mount, which provides 360-degree rotation and swivel for each display. Its full-motion desk-mounted design preserves valuable desktop space for external peripherals and files, and its +/- 45-degree tilt angles allow personalized positioning of your displays..Articulating/full-motion desktop mount for two monitors from 13 - 27".Compatible with VESA mounting 75 x 75 mm and 100 x 100 mm patterns.Weight capacity: 22 lbs..Supports tilt angles of +/-15 deg, 360 deg swivel, 360 deg rotation for easy adjustment of viewing angle.Dual section mounting arm that extends up to 16 1/2" & allows height adjustment up to 18" for proper monitor positioning.Supports portrait or landscape monitor orientations.Installs quickly and easily on to any desk or table.Heavy-duty "C"-clamp is compatible with all table and desk surfaces from 1/2 - 4" in thickness.Integrated cable management keeps cables neat, organized and out of the way.Gets monitors out of the way & frees up valuable desk workspace.Includes: Installation guide and mounting hardware kit.Weight: 10.6 lbs..5 years limited mfr. warranty.SIIG Articulating Dual-Monitor Desk Mount - Personalized Viewing Angles

The Atdec AWMS-4-4675 is a quad 18" arm combination attached to a 29.5" post with F-clamp. Display height, optimal viewing angle, and orientation can be set to individual requirements. Built of lightweight yet durable aluminum, the mount can be easily recycled at the end of its life..Raise your monitor to a comfortable viewing height with this quad-arm monitor mount.Supports four displays up to 30" in landscape orientation or up to 22" in portrait mode.Comes in black and made of aluminum.-25 to 45-degree tilt, 360-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Compatible with: VESA 75 x 75mm, and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 26.5 lbs. or curved screens with maximum weight up to 17.6 lbs. per monitor.Modular, adaptable, and upgradeable design.10-year manufacturer limited warranty

M2.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to patent-pending Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M2.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M2.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M2.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M2.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M2.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..M2.1 is compatible with Humanscale’s revolutionary docking station, M/Connect 3, to eliminate desktop cables and provide a more streamlined workspace. It is also compatible with M/Power – a USB Type-A and Type-C charging station that offers convenient, high-speed charging for personal devices..In today’s fast-paced, agile work environment, there’s no time for discomfort. M2.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M2.1 meets a variety of configuration needs for lighter monitors up to 15.5 lbs. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M2.1 enables the personalization and flexibility needed for today’s evolving workplaces.

The Dual Aluminum Heavy Duty Monitor Mount with USB and Audio Ports is a premium workspace upgrade designed to support monitors up to 35 inches, offering ergonomic height adjustment to reduce strain and improve posture. Crafted from durable aluminum with a sleek white finish, this mount features full rotation, tilt, and swivel capabilities for customizable viewing angles. It includes integrated USB and audio ports for convenient connectivity, and rubber feet to protect your desk surface. Compatible with VESA 100 x 100mm mounting patterns, it measures 29.53"H x 43.07"W x 5.04"D, weighs 19.4 lbs., and comes backed by a 2-year manufacturer limited warranty—making it an ideal solution for professionals seeking both functionality and style..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 35" monitors for versatile use.Made of aluminum.Rotation, tilt, and swivel functions enable adjustments for comfortable viewing.Weighs 19.4 lbs..Dimensions: 29.53"H x 43.07"W x 5.04"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in white.Rubber feet protect desk surface.2-year manufacturer limited warranty.Maximize Comfort and Connectivity with the Dual Aluminum Heavy Duty Monitor Mount – Built for Performance, Designed for Versatility

M8.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M8.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M8.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M8.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M8.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M8.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..In today’s fast-paced, agile work environment, there’s no time for discomfort. M8.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M8.1 meets a variety of configuration needs for single monitors from 6 to 28 pounds or – with an optional crossbar support – dual monitors up to 12 pounds each. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M8.1 enables the personalization and flexibility needed for today’s evolving workplaces.

Whether at home or in the office, everyone deserves a workspace that looks great and makes them feel their best. Create a neat, productive workspace with this affordable monitor arm that's easy to set up and backed by Ergotron's trusted reputation for quality..Single Monitor Mount, Material & Color: Black.Desk Clamp attaches to surface edge up to 1.97" (50 mm) thick.Capacity ≤ 17.6 lbs.Tilt: 35°.Pan: 180°.Rotation: 360°.Warranty: 5 years

Workfit Support kit and mounting hardware.Desk - Workfit -TL, Staples Item # 2094430.Mounting Arm, Staples Item # 454300.Cable Package, Staples Item # IM16F5158(includes 6 cables).Grommet Kit, Staples Item # IM13M7548.1x StarTech 15' USB 2.0 A/B cable: Staples SKU IM1321252.1x StarTech 6.5' slim 3.5 audio cable extender: Staples SKU IM1TB7066.1x StarTech 6' USB 2.0 extension cable: Staples SKU IM1DM7810.1x StarTech 10' DisplayPort cable: Staples SKU IM1Q18948

M8.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M8.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M8.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M8.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M8.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M8.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..M8.1 is compatible with Humanscale’s revolutionary docking station, M/Connect 3, to eliminate desktop cables and provide a more streamlined workspace. It is also compatible with M/Power – a USB Type-A and Type-C charging station that offers convenient, high-speed charging for personal devices..In today’s fast-paced, agile work environment, there’s no time for discomfort. M8.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M8.1 meets a variety of configuration needs for single monitors from 6 to 28 pounds or – with an optional crossbar support – dual monitors up to 12 pounds each. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M8.1 enables the personalization and flexibility needed for today’s evolving workplaces.

Mount-It! MI-2781 helps raise your monitors to an ergonomic position and work more efficiently with this dual monitor stand. Designed for performance, this monitor stand is made from high-strength steel for durability. Freestanding base sits on top of any desktop for quick installation. The arms can be raised or lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop.All necessary instructions and hardware included.Screen Sizes: 13" - 32"VESA Compatible: 75x75, 100x100Monitor Weight Capacity: 17.6 lbs. (per screen)Tilt: +45°~-45°Swivel: +90°~-90°Screen Rotation: +180°~-180°Pole Height: 18.3"Material: Steel.ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 22 lbs. per arm for a total capacity of 44 lbs..FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 45 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 18.3" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 19" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to monitors and reattached to the stand in just a few minutes. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Mount two 13" to 32" LCD displays on your desk with this Mount-It! dual monitor desk stand LCD mount to improve productivity.

The Humanscale M2.1 monitor arm instantly improves the comfort, health, and productivity of any workspace. Enables the personalization and flexibility needed for evolving workplaces..Monitor arm allows the user to view their monitor at an optimal position.Holds a single standard-size monitor.Patented weight-compensating spring technology enables smooth and uniform height adjustment up to 10".Comes in polished aluminum with white trim.Rubberized cable management makes it simple to run cords through the modular system for a clean, sleek, and organized aesthetic.Built-in counterbalance indicator provides the ability to counterbalance the monitor weight before monitor installation to reduce expensive computer setup costs.Smart stop allows the user to customize the rotation of the arm, preventing overhang and protecting surrounding equipment.Quick-release joints instantly snap together for a secure and robust fit, simplifying installation (only one tool is required, and it's neatly concealed inside the arm base).Compatible with M/Connect 2 and M/Power integrated monitor arm bases and docking stations.15-year manufacturer limited warranty

This free-standing triple-monitor stand saves you valuable desk space, while creating a more comfortable and ergonomic workspace. Constructed of high grade steel, the sturdy monitor stand suspends up to three monitors above your desk or other work surface. Work with greater comfort and productivity: Clear up your desk surface while creating an ergonomic workspace. This computer monitor stand enhances your efficiency and productivity, by supporting three displays 13" to 27" (330 to 686 mm) in size and up to 17.6 lb. (8 kg) per monitor in weight. It's ideal for offices, control rooms, banking, real estate and other real-time environments where multiple monitors are essential to productivity. Adjust your monitors to the ideal position with the articulating arms. Easily rotate up to 360°, tilt up to 30° up or down and swivel +30° / -30° to adjust your screen position. The structure allows smooth, effortless rotating and positioning for any direction, making it easy to reduce glare and find the ideal viewing angle. The micro-adjustment features enables level alignment. You can also adjust the height of your monitors along the vertical pole, with maximum height adjustment of 16.7" (424 mm), to reduce neck and eye strain. Choose from landscape or portrait screen rotation to customize your workspace. You can set up three displays in landscape position to create a curved surround effect or 'cockpit style' for comfortable viewing. Rugged steel construction: With its heavy-duty steel construction and aluminum base, the triple-monitor stand holds your monitors securely and provides long-lasting performance. The surface finish helps to resist scratches. Easy installation: The monitor stand is designed for easy installation on your desk, table or other work surface. To help keep your work area free of clutter, the monitor stand also features cable clips that keep your cables neatly out of sight. The ARMBARTRIO2 is backed by a StarTech.com 5-year warranty and free lifetime technical support..Create a more ergonomic workspace in office environments or your home office.Increase your productivity by utilizing three monitors, ideal for control rooms, financial services, real estate and other real-time environments.Style: Cockpit.Made of aluminum.Pan and Tilt functions enable adjustments for comfortable viewing.360-degree rotation allows monitors to be oriented vertically or horizontally.Weighs 15.43lbs..Dimensions: 18.23"H x 11.8"W x 55.6"D.Compatible with: VESA 100 x 100, 75 x 75 mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty

The StarTech.com dual monitor mount allows you to mount two LCD/LED displays size up to 24", onto a single low-profile base. Position the two monitors on a single base and boost your productivity by multitasking on two displays. This stand features easy-to-adjust height and tilt mechanisms which lets you customize the viewing position of the monitors at a comfortable height and angle without disrupting your work..Dual monitor stand.Steel and plastic enclosure.Supports 24" display.Number of displays supported: 2.Work more comfortably, with hassle-free display adjustments.Includes pole, baseplate, cable-management clip, pole cap, crossbar, VESA monitor mounts, M4x30 screws, M4x12 screws and Allen wrench.Comes with 2 years warranty.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Dual monitor stand work more comfortably, with hassle-free display adjustments.

Whether you are working from home or in an office, this dual monitor stand with spring assisted height adjustment allows you to set your monitor height to your personal ergonomic viewing position. It comes with a stable, freestanding base which means you can easily place it anywhere without having to worry about clamp or grommet mounting. The monitor stand fits two screens between 17" and 32" in size with a weight between 4.4 and 17.6 lbs each and comes with a quick release VESA plate (75x75 & 100x100) for easy installation. An integrated handle allows for quick and easy height adjustment and the sliding horizontal bar enables you to seamlessly align your screens. If you ever want to turn your screens to share them or reduce glare, the integrated swivel feature allows for up to 25° rotation left and right. The screens themselves can be rotated 180° left and right so that you can view them in horizontal as well as vertical orientation. Keep your cords organized and your workplace neat with the integrated cable management..This freestanding dual monitor arm with stable base allows you to adjust height and alignment of your screens for an ergonomic viewing experience.It is compatible with monitors from 17" to 32" and up to 17.6 lbs each.Height-adjustable via spring-assisted mechanism, Min of 12.40" to 18.30".The monitor arm is finished in black and constructed from durable steel for stability..The monitors can swivel up to 25° left and right, rotate fully 360° for horizontal or vertical viewing orientation, and feature horizontal rotation up to 180° left or right, Tilt: +/-10°, Swivel: +/-25°.Each monitor arm supports screens weighing up to 17.6 pounds..Compatible with standard VESA mount patterns measuring 75x75mm and 100x100mm..Perfect for office and home use.An integrated cable management system keeps your cords organized and the quick release VESA plate ensures easy monitor installation.Supported by Limited Lifetime Warranty.Make Your Workday Easier with an Adjustable Dual Monitor Arm!

Triple Aluminum Gas Spring C-Clamp Desk Mount - 32"..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.Rotation, swivel, and tilt functions enable adjustments for comfortable viewing.Weighs 21.6 lbs..Dimensions: 60.24"H x 27.56"W x 7.5"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

Choose a monitor arm that’s as adaptable as you. With the HX Wall Monitor Arm, you can reposition large monitors weighing 20 to 42 lbs. (9.1 to 19.1 kg) using patented Constant Force Technology. It enhances your workspace with a sleek design, and an optional dual or triple monitor bow kit ups your screen count and productivity. It’s BIFMA level 2 certified based on the arm’s low environmental and social impact..Monitor Mount & Stand Type: HX Wall Monitor Arm.Monitor Size Supported & Number of Arms: 49" Screen Support, 1.Adjustable Minimum and Maximum Height (Inches): 11.5.True Color & Material: White, Metal.Articulation: Tilt Angle 75°, Rotation Angle 360°.Storage options: N/A.Weight (lbs.): 11.7.Mount Bracket or VESA Pattern: MIS-D/E/F

Ora is a sophisticated monitor arm with clamp for modern ergonomic workspaces. Its patented design fuses Atdec's domain experience with innovative material and manufacturing techniques for superior esthetics and performance in its class. Ora achieves high and extremely stable capacity despite its sleek minimalist form. Its stability and power come from a unique single-piece monocoque architecture that augments strength, amplified by natural geometric forces created via arm movement. Ora's design is vibration resistant for a crisp and confident user experience..Monitor arm for ergonomic work spaces, sit-to-stand, or shared workplaces.Supports curved and flat monitors up to 35".Silver aluminum.Tilt Angle: -20° to +45°, Pan adjustment: 180°.8.5 lbs.22.5" x 7.30" x 5.4".VESA 75 x 75 to 100 x 100

MI-33111-BLK single monitor desk mount features a single articulating arm with smooth, full motion adjustments including height, tilt, swivel and rotation. This desk mount is designed to position your monitor perfectly for a healthier, more comfortable way to work throughout the day. Save desk space while improving posture by elevating your monitor off of the desk to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The grommet base easily attaches to any desk up to 3.5” thick, making it an easy addition to any workspace. Fits monitors up to 32” with a weight capacity of 19.8lbs..Max Screen Size 30 inches.360 degree swivel.Extension 16 inches.Height adjustable 8 inches.Load Capacity 28 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty.Monitor Mount

This is a notebook and display spring arm combination attached to a 5.3" post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arms incorporate a spring tension visual gauge indicator to save time and effort with multiple installations. Built from lightweight and yet durable aluminum, the mount can be easily recycled at the end of its life..Notebook and display spring-arm combination desk mount.Ideal for displays up to 32" and notebooks up to 18".Can adjust height along 5.31" post with 24.33" dynamic arms.Built from lightweight and yet durable aluminum. Color: Silver.Includes spring assisted height adjustability, tilt adjustment, and landscape to portrait screen rotation..19.6 lbs..Package dimensions: 18.30" x 12.30" x 10.30"

The VFS-DH freestanding desk mount is an ideal accessory for any dual or single monitor application. Both monitors can be independently adjusted up to 20 degrees in any direction and rotated between landscape and portrait orientations. The unique QuickShift lever provides independent horizontal adjustment without the need for a single tool. An elegant design with a footprint of 16.61”x12” leaves your desk clear of clutter. The freestanding base provides flexibility to be located anywhere on the desk. This mount can be converted into a single display configuration by attaching one of the VESA heads directly onto the vertical post..Dual or single monitor freestanding desk mount.Ideal for displays up to 26.5 lbs..Independent horizontal adjustment.Built from lightweight and durable anodized aluminum. Color: silver.Tilt adjustment of 20 degrees in any direction, pan adjustment of 20 degrees in any direction. Supports landscape to portrait screen rotation..12.8 lbs..Package dimensions: 20.30" x 13.40" x 4.30".VESA 75x75 to 100x100

Position dual monitors quickly and easily with the Professional Dual Touch Adjust Monitor Desk Mount from V7. Made from premium quality aluminum and cold rolled steel for durability with black matte finish, the mount can hold up to 32" displays and 17 lbs (8 kg). No more crawling under the desk as this mount installs completely from the top with easy no screw arm installation making setup the quick and easy. Featuring an advanced cable management system to keep video and power cables neatly tucked away and out of sight, and included clamp and grommet mounting options, it's perfect for virtually any workstation. The height adjustment and independently adjustable arms enable multiple viewing angles, so you can position your monitor where it's most comfortable to use. Additionally, the mount has a quick-release VESA plate to make installation easy and is backed by a 5-year warranty..Dual monitor mounting arm for up to 32" (81.28cm) displays.Installs entirely from above the desk surface with screwless arm installation and Quick release VESA plate for fast and easy setup.Free tilt and 360 swivel design with height adjustable stand and arm for flexible viewing angles and better ergonomics.Cable management system keeps cables out of the way or organized.Both clamp and grommet mounting options are included

You no longer need a wall or desk to mount a monitor. With Amer pole mount monitor arm, all you need is a pole! These monitor arms integrate a clamp and adjustable monitor arm that mount quickly and easily to a 1.1"-2.4"Dia. (28mm to 60mm) diameter pole. They're the perfect mounting solution when conventional mounting isn't available..Create your perfect workspace with this full-motion pivot pole mount monitor arm.Supports a monitor up to 32" and 17.6 lbs. for versatile use.Made of steel and plastic in matte black.360-degree rotation around the pole provides optimal viewing.Dimensions: 5.6"H x 4.5"W x 13.8"D.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Free-tilting design makes easy forward or backward adjustment for better viewing and reduced glare.Pole clamp attaches to circular tube firmly.Swiveling arm offers maximum viewing flexibility.Cable management keeps everything organized

MI-35114 single monitor wall mount features an articulating gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to save space while improving posture by raising the monitor to eye level in any type of environment. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mountcompatible with screens up to 32".Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 20 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

View data clearly and reclaim desk space with this stand, which supports two monitors up to 24 inches and 31 pounds. This Ergotron horizontal dual monitor desk stand can be used to rotate monitors between portrait and landscape views to better suit any task..Raise your monitor to a comfortable viewing height with this monitor stand.Supports up to 24" monitors for versatile use.Made of steel.360-degree rotation allows monitors to be oriented vertically or horizontally.Securely holds up to 62 lbs. to fit a wide range of monitors.Compatible with the standard VESA mounting patterns: 100 x 100, 75 x 75.Comes in black finish.5-year manufacturer limited warranty.Multitask in comfort by using this Ergotron horizontal dual monitor desk stand.

Mount-It! Large Monitor Desk mount was designed for larger monitors and TVs. Its VESA 200x200 and 200x100 bolting patterns makes it compatible with larger and ultrawide monitors in the size range of 34, 35, 37, 38, 40 and 42 inches. This monitor mount can even be used to install a TV to a desktop for improved safety. Most monitor desk mounts on the market only have VESA 100x100 bolting pattern and are too small to connect to the newer and larger monitors on the market. By elevating the monitor from the tabletop, users can achieve a more ergonomic posture that reduces back and neck pain. Raising a larger monitor off of your desktop also creates more space..Screen Sizes: 17" - 42".Fully adjustable counterbalance arm with mechanical spring.Weight capacity: 22 lbs..Integrated cable management system.Tilt: 85 degrees up / 85degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors.Supported by manufacturer's limited lifetime warranty