Non-Blocking Ethernet Switches

This TP-LINK JetStream enterprise switch with 8 x gigabit PoE+ ports and 2 x gigabit SFP slots provides non-blocking switching performance and ultralow latency, so reliable and lightning-fast connections to server and other switches are easily built. Security features include IP-MAC-Port-VID binding, port security, storm control, and DHCP snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the access control lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users' network access can be controlled via 802.1x authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided..8 x gigabit (RJ45) ports of this managed switch offer high-speed and reliable connections to other switches and devices.Contains 8 x 802.3at/af compliant PoE+ ports with a total power supply of 150W.Provides up to 20Gbps of switching capacity.Rack-mountable and features a fanless design.Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more; with QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply.Cloud access and the Omada app for enhanced convenience and easy management.Maximum power consumption: 23.6W (110V/60Hz).8 x Gigabit PoE+ ports and 2 x Gigabit SFP slots provide high-speed connections.Helps route internal traffic for more efficient use of network resources.Features robust security strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.Stand-alone management: web, CLI (console port, Telnet, SSH), SNMP, RMON, and dual image bring powerful management capabilities.sFlow, QinQ, L2PT PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind.802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links.IPv6 functions such as dual IPv4/IPv6 stack, MLD snooping, IPv6 ACL, DHCPv6 snooping, IPv6 interface, path maximum transmission unit (PMTU) discovery, and IPv6 neighbor discovery guarantee your network is ready for the next-generation network (NGN) without upgrading your hardware.Lifetime manufacturer limited warranty

Elevate your enterprise network with the Grandstream GWN7822P, a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large businesses. Featuring 24 Gigabit ports—including 8 ultra-fast 2.5G ports—and 4 SFP+ uplinks, it delivers blazing 80Gbps switching capacity for seamless data flow. Smart PoE/PoE+/PoE++ power control supports up to 240W total output, ideal for powering IP phones, cameras, and access points. Advanced security protocols, ACL filtering, and built-in QoS ensure secure, prioritized traffic management. With support for IPv4/IPv6, stacking capabilities, and flexible management via embedded controller, GDMS, CLI, or GWN Manager, the GWN7822P offers unmatched scalability and control..24 Ethernet ports, multi-gigabit speed, and fully managed Layer 3 switching..Powers devices via dynamic PoE/PoE+/PoE++ with up to 240W total output..80Gbps switching capacity for high-speed enterprise networking..Built for rack mounting, ideal for structured and scalable network setups..Enables SNMP v1/v2c/v3 for advanced network monitoring and control..Prioritizes traffic intelligently using built-in Quality of Service (QoS)..Secures access with ACL filtering, 802.1X, MAC auth, and AAA protocols..Supports stacking, link aggregation, and dual boot for resilient operations..Optimizes power use with smart control and optional redundant power supply..Meets FCC, CE, RCM, and IC compliance standards for global deployment.

Ubiquiti UniFi is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. Features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. FP ports enable network uplinks of up to 1 Gbps. The UniFi PoE Switch features fanless, silent thermal cooling, so it can be located in any workspace..Configurable Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and two SFP ports.Contains 24 10/100/1000 RJ45 ports and two 1G SFP Ethernet ports.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features.Dimensions: 1.72"H x 16.71"W x 7.87"D.Max. power consumption (excluding PoE output): 18W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Quiet cooling for any workspace.SFP ports enable network uplinks of up to 1 Gbps.Features fanless, silent thermal cooling, so it can be deployed in areas where fan noise would be distracting..Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Comes in silver.2-year manufacturer limited warranty

The Aruba CX 6200 Switch Series is a next-gen family of stackable access switches ideal for enterprise branch offices, campuses, and SMB networks. Created for game-changing operational efficiency with built-in analytics and automation, the CX 6200 switches provide an enterprise-class access layer solution that's simple and secure. Built from the ground up with a combination of cutting edge hardware, software and analytics and automation tools, the stackable CX 6200 switches are part of the Aruba CX switching portfolio. By combining a modern, fully programmable OS with the Aruba Network Analytics Engine, the CX 6200 brings industry leading monitoring and troubleshooting capabilities to the access layer..Features 48 Gigabit Ethernet ports, Gigabit Ethernet performance class, and is a fully managed switch.Supports PoE with a 370W budget across 48 ports for powering network devices..Data transfer rates of up to 1 Gbps per Ethernet port and 10 Gbps through its SFP+ uplink ports.Rack-mountable form factor and supports virtual stacking for scalable deployments.SNMP v1, v2, and v3 for secure and scalable network monitoring and management.Quality of Service (QoS) features for prioritizing network traffic and ensuring optimal performance.Offers system management with security features like role-based access, ACLs, and centralized monitoring.Up to 176 Gbps switching capacity and supports Layer 3 operational mode for advanced network management.Consumes up to 370W with energy-saving features like port shutdown and dynamic power control.Limited Lifetime Warranty

Your network is under more pressure than ever. As the number of connected devices expands, bandwidth demands continue to soar, making it difficult to consistently provide the secure, high-speed connection your business depends on. SonicWall's feature-rich switches answer the challenge delivering high-speed switching, so you can add more devices, keep up with SaaS proliferation and gain more control, all while protecting your network and your budget. Its unified security posture makes it ideal for small and medium-sized businesses and Software Defined Branch (SD-Branch) deployments. Keep pace with the changing network and security landscape..Layer 2 managed switch with 24 x Gigabit Ethernet and 4 x 10Gbps SFP+ ports.128Gbps line-rate fabric ensures congestion-free connectivity to your devices.1U dimension standard allows you to mount it to your rack.Supports Simple Network Management Protocol (SNMP) v1/v2c/v3.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use Capture Security Center.Secure SD-Branch solution transforms user experience at branch office locations by delivering a unified platform that enables branches to be deployed in minutes and delivers unified visibility and threat detection from a single pane of glass.Managed via firewalls for unified, single-pane-of-glass management of the entire SonicWall infrastructure.Features zero-touch deployment capability with the ability to quickly roll out devices across branches spread out globally.Meets or exceeds the FCC Class A, ICES Class A, CE (EMC Class A, LVD, RoHS), and UL/cUL standards.1-year manufacturer limited warranty

5% off  of Netgear 8-Port Unmanaged Switch, Gray (MS108UP-100NAS)

The Netgear brings the first Unmanaged Multi-Gigabit PoE++ switch MS108UP with 60W per port Ultra60 PoE++ technology, great for powerful PoE++ installations with PoE budgets up to 230W, a compact size, plug-and-play installation, and reliable performance at affordable prices. The new model MS108UP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE), providing up to 60W/port. The new switch model can power devices such as VoIP phones, surveillance IP cameras, wireless access points, and many other applications. This new Unmanaged switch provides PoE Auto-Balance to help automatically balance the PoE power based on the device needs independent of PoE class detected. With the growing deployment of applications and an all-in-one solution, providing multi-speed and high power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated, non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can power and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop or mount it to your wall with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Eight ports of multi-gigabit 1G/2.5G speeds to connect devices instantly and give them each exactly the speed they need: 1G or 2.5G automatically.Unique PoE Auto-Balance technology automatically balances the PoE power based on the device's needs independent of PoE class detected.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design makes this switch perfect for noise-sensitive environments.Easy monitoring through per-port LEDs for port activity and speed.Simple, yet useful network set-up on top of plug-and-play connectivity.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1G/10G SFP+ and 4 x 1/10/25/50G SFP ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 654Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 85W with JL085A PSU; switching capacity: 880Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable

The Aruba CX 6000 switch series is modern family of entry level access switches perfect for branch offices, midsize businesses, and small enterprises. Designed for reliable, simple, and security-enhanced access, the Aruba CX 6000 series provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications. The Aruba CX 6000 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. his fully-managed series has convenient built-in uplinks with up to 370W of Class 4 PoE to support IoT devices such as security cameras and wireless APs..48-port Gigabit Ethernet managed switch perfect for branch offices, midsize businesses, and small enterprises.Features 48 x 10/100/1000BASE-T PoE ports with up to 370W power budget, 4 x 1G SFP uplink ports, 1 x USB Type-C console port, and 1 x USB Type-A host port.Switching capacity: up to 104Gbps.Comes in a 1U rack-mountable form factor.SNMPv1/v2c/v3 support provides read capability of industry-standard management information base (MIB) and private extensions.Quality of service features include: strict priority (SP) queuing; traffic prioritization (IEEE 802.1p) for real-time classification; rate limiting sets per-port ingress enforced maximums and per-port, per-queue minimums; large buffers for graceful congestion management; class of service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP type of service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ.Supports a choice of management interfaces: intuitive, easy-to-use switch Web GUI, cloud-based Aruba Central, built-in programmable REST API interface, and more.Throughput capacity: up to 77.3Mpps.Maximum power consumption: 45W or 480W with max PoE power.Features a dual-core ARM Cortex A9 1016MHz CPU, 4GB DDR3 SDRAM, and 16GB eMMC memory.Lifetime manufacturer limited warranty

Cisco Catalyst 9500 Series switches based on Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) are Cisco's lead fixed enterprise core and aggregation switching platform and as part of the Catalyst 9000 family, are built to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place..Layer 3 managed switch with 24 x 25Gbps Ethernet and 4 x uplink SFP28 ports.1/10/25G Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials with NW Advantage package license.Platinum-rated (greater than 90% efficient) AC and/or DC power supplies.Support Cisco StackWise Virtual technology that increases operational efficiency and boosts nonstop communications and scaled system bandwidth, while multichassis EtherChannel function allows configured across StackWise-Virtual members for high resiliency.Cisco IOSXE operating system for the enterprise provides support for model-driven programmability, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Scalable Layer 3 routing (IPv4, IPv6, and multicast) tables and Layer 2 switching tables.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Equipped with field-replaceable fan-tray units.Lifetime manufacturer limited warranty.Cisco Catalyst 9500 Series 24-Port Multi-Gigabit Ethernet Layer 3 Managed Switch, 2Tbps

31% off  of Netgear 300 Series GS316PP 16-Port Gigabit Ethernet Unmanaged PoE+ Switch with High-Power FlexPoE (183W)

Get networks up and running with Netgear plug-and-play unmanaged switches. PoE 183W power budget lets you dedicate power for network devices with a simple CAT-5 cable..16-port Gigabit Ethernet unmanaged PoE+ switch with high-power FlexPoE (183W).Dimensions: 1.1"H x 11.3"W x 4"D.Durable and rugged metal case in black.16 Gigabit Ethernet ports.Simple setup with no software to install or configuration needed and zero maintenance.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design minimizes noise pollution, making the switch ideal for noise-sensitive environments.Supports desktop and wall placement.Ensure interoperability with any standards-based PDs

The Aruba CX 6000 Switch series is modern family of entry level access switches perfect for branch offices, midsize businesses, and small enterprises. Optimized for reliable, simple and secure access, the CX 6000 series provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications. The CX 6000 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. This fully managed series has convenient built-in uplinks with up to 370W of PoE+ to support IoT devices such as security cameras and wireless APs. A compact and fanless model is perfect for use in quiet, small work spaces. The CX 6000 series is easy to deploy and use with flexible management choices that include Web GUI, CLI, cloudbased and on-premise Aruba Central management, so you can choose the best fit for your business and network environment. Delivering Layer 2 capabilities with enhanced access security, traffic prioritization, and IPv6 support, the CX 6000 also simplifies ownership and brings peace of mind with no switch software licensing.Optimized for reliable, simple and secure access, this managed switch provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications.Contains 24 10/100/1000BASE-T ports and four 1Gb SFP ports; supports PoE standards: IEEE 802.3af, 802.3at.Based on AOSCX, a modern database-driven operating system that is built on a modular Linux architecture; secure management access delivers secure encryption of all access methods.Up to 104Gbps in non-blocking bandwidth and up to 77.3Mbps for forwarding.Dimensions: 1.73"H x 17.4"W x 12"D.Power consumption (230 VAC): idle: 22.9W; max. power (w/o PoE): 32.7W; max. power (w/ PoE): 455W.Certifications and standards: Meets or exceeds UL, EN, CSA, VCCI, IEC standards.Mounts in an EIA-standard 19" telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting.Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS and static routing.Convenient built-in 1GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.Simple deployment with Zero Touch Provisioning.Simplifies adding, moving, and changing with colorless ports.Selectable queue configurations that allow for increased performance by defining a number of queues and associated memory buffering to best meet the requirements of network applications.Auto-MDIX provides automatic adjustments for straight-through or crossover cables on all 10/100/1000 ports.Unsupported transceiver mode (UTM) allows inserting and enabling all unsupported 1Gb transceivers and cables.VLAN support and tagging support for IEEE 802.1Q (4094 VLAN IDs) and 512 VLANs simultaneously.Jumbo packet support improves the performance of large data transfers; supports frame size of up to 9198 bytes.Lifetime manufacturer limited warranty

HP? J9822A Managed switch with 4GB of standard memory and 16MB flash memory for high-computing operation. This rack mountable switch has input voltage of 120 VAC/230 VAC. Comes with 12 switching and management expansion slots. Supports layer 3 for effective communication over the network..Switch for office-core deployments.Measures 12.1" x 17.5" x 17.8".Features manageable switch for easy configuration.Has rack-mountable configuration and operating voltage of 120 - 230 VAC.Has freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD Card, 4GB DDR3 SODIMM memory.Has 1000MB latency less than 2.9 micros, 10 Gb/s latency less than 2 micros and throughput up to 785.7 Mpps.Has 12 open module slots and supports a maximum of 96 10GbE ports for flexibility.Has routing/switching capacity of 1 Tbps, switch fabric speed of 2 Tbps and 7U compatible rack unit.Features intelligent management center, command-line interface, web browser, configuration menu and out-of-band management.Has SNMP v1/v2c/v3, sFlow, CLI, DHCP, VLAN, web based management, telnet.Has operating temperature range of 32 - 113 deg F operating, -40 - 158 deg F storage, Humidity of 15 - 95percentage for precise operation.Includes 5406R zl2 switch, 1 x 5400R zl2 management module (J9827A), 1 x 5412R zl2 switch fan tray (J9832A), mounting kit.Meets Safety: CSA 22.2 No. 60950, UL 60950, Emissions: FCC part 15 Class A, EN 55022 standards.Weighs 17.28 kg.Comes with lifetime limited warranty.HP® Managed switch has routing/switching capability of 1 Tb/s and switch fabric speed of 2 Tb/s. With unprecedented flexibility, this switch is perfect for office-core deployments.

The Aruba 2930F switch series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. This convenient Layer 3 network switch includes built-in uplinks and PoE power and is simple to deploy and manage with advanced security and network management tools like Aruba ClearPass policy manager, Aruba AirWave, and cloud-based Aruba Central. This switch provides a convenient and cost-effective access switch solution that can be quickly set up with zero touch provisioning. The robust Layer 3 feature set includes a limited lifetime warranty..Fanless 12-port Gigabit Ethernet managed switch provides performance and ease of use for enterprise campuses, SMBs, and branch offices.Features 12 x RJ45 auto-sensing 10/100/1000 PoE+ ports, 2 x RJ45 auto-sensing 10/100/1000 ports, 2 x SFP+ 1/10GbE ports, and a dual-personality RJ45 serial console port.Switching capacity: 68Gbps.Comes in a 1U rack-mountable design.Power rating: 170W (maximum), 20W (idle).Supports advanced security and network management via Aruba ClearPass policy manager, Aruba AirWave, and Aruba Central.Throughput: up to 41.7Mpps.Maximum power consumption: 170 W (139W PoE+ power).Meets or exceeds the DoE VI, UL/CUL, and FCC CFR 47 Part 15 Class A standards.MAC address table size: 32768 entries.Packet buffer size: 12.38MB.Features a dual-core ARM Cortex A9 1016MHz CPU, 1GB DDR3 SDRAM, and 4GB eMMC memory.Lifetime manufacturer limited warranty

Build and expand your network with the Ubiquiti UniFi Flex switch, part of the UniFi Enterprise System. The UniFi switch is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports, providing 1 PoE input and 4 PoE output links to your devices. The Ubiquiti UniFi Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE, USW-Pro-24-PoE, US-XG-6POE, and USW-Industrial switches, sold separately) as power source, USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options. Managed and configured by the UniFi Controller or UniFi Mobile app, the Ubiquiti UniFi Flex switch offers basic Layer 2 switching protocols and features. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features using a graphical user interface from anywhere..Managed switch is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE.Features 5 x Gigabit RJ45 ports to deliver robust performance and intelligent switching for your network; port 1 provides PoE input while ports 2-4 offer 802.3af PoE.Managed and configured by the UniFi Controller or UniFi Mobile app, switch offers basic Layer 2 switching protocols and features.Can be installed horizontally or vertically and offers versatile mounting options: desktop, wall, and pole.Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Maximum power consumption: 5W (excluding PoE output).Meets or exceeds the CE, FCC, IC standards.Weather-resistant switch can withstand extreme temperature variations.Supports up to 5Gbps of total non-blocking throughput.Dimensions: 4.66"H x 2.48"W x 1.36"D.1-year manufacturer limited warranty

The Aruba CX 4100i switch series is a modern family of ruggedized Ethernet switches ideal for connecting IoT, access points, and user devices in harsh environments. Created for high performance, reliable, and access with enhanced security, the Aruba CX 4100i switches provide versatile deployment options for enterprise networks extending beyond carpeted areas to challenging outdoor and industrial spaces. Based on the programmable AOS-CX operating system used across the Aruba CX portfolio, this IP30 ruggedized series helps deliver a more consistent, more efficient operator experience. This Layer 2 series has convenient built-in high-speed uplinks, supports both 30W and 60W PoE, and is ready for deployment with fan less 12 port DIN mount and 24 port 1U rack mount models. With robust QoS, support for static routing, and IPv6, the Aruba CX 4100i also simplifies ownership with no switch software licensing requirements..High-performance ruggedized Ethernet switch is great for connecting IoT, access points, and user devices in harsh environments..Features 4 x 100M/1G BaseT Class 6 PoE ports supporting up to 60W per port, 20 x 100M/1G BaseT Class 4 PoE ports supporting up to 30W per port, and 4 x 1G/10G SFP ports.Switching capacity: up to 128Gbps; routing throughput: up to 95Mpps.Mounts to an EIA/TIA standard 19" telco rack (mounting brackets included with product).SNMPv1/v2c/v3 support provides read capability of industry-standard Management Information Base (MIB), and private extensions.With robust QoS, support for static routing, and IPv6, it also simplifies ownership with no switch software licensing requirements.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.Fixed internal power supply (300W); power consumption is 23W.Versatile form factors deliver both 30W and 60W PoE to optimize IoT power.Built-in high-speed 1/10GbE uplinks for demanding applications.Robust protection for sub-station applications and high tolerances for railway rolling stock, signaling and telecommunications.Secure and simple access for IoT and users with Aruba Dynamic Segmentation.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.No switch software licensing required.5-year manufacturer limited warranty

The Ubiquiti Switch Enterprise has a 124 Gb/s with 62 Gb/s non-blocking throughput and a 92.25 Mpps forwarding rate for smooth data transfers..(12) 2.5 GbE, (12) GbE; all PoE+ ports.(2) 10G SFP+ ports.400W total PoE availability.DC power backup-ready.Layer 3 switching.Remote firmware upgrade.Manage your networks from a single control panel

The Tenda TEG1016M is a high-performance, 16-port Gigabit Ethernet switch designed for small and medium-sized businesses as well as home networking environments. Featuring 16 auto-negotiation 10/100/1000 Mbps RJ45 ports, the switch ensures seamless and high-speed data transfer, making it ideal for applications requiring stable and reliable connectivity, such as file sharing, video streaming, and network expansion. With a switching capacity of 32 Gbps and a forwarding rate of 23.8 Mpps, the TEG1016M delivers robust performance to support demanding network setups. Its One-Key VLAN mode allows easy segmentation of ports for improved network security and performance, isolating ports 1-14 while maintaining communication with ports 15 and 16. This feature is particularly useful for surveillance systems or environments requiring secure data traffic management. Built with durability in mind, the TEG1016M features a mini steel shell and a fanless design for silent operation and efficient heat dissipation. Its compact size and wall-mountable design provide flexibility for installation in various setups. The device is also equipped with 6kV lightning protection for all ports, ensuring stable operation in environments prone to electrical surges. Plug-and-play functionality eliminates the need for configuration, making it user-friendly for professionals and non-technical users alike. The switch is CE, FCC, and RoHS certified, guaranteeing compliance with global safety and environmental standards..The Tenda TEG1016M features 16 Gigabit Ethernet ports, supports unmanaged network management, and delivers high-performance connectivity suitable for small to medium-sized networks..Supports a maximum data transfer rate of 1000 Mbps per port, ensuring fast and reliable network performance for bandwidth-intensive applications..The switch comes in a compact desktop form factor, with an option for wall mounting to accommodate flexible installation setups..Simple Network Management Protocol (SNMP) is not supported, as this is an unmanaged switch designed for straightforward, plug-and-play operation..The TEG1016M includes basic Quality of Service (QoS) features for efficient traffic prioritization, ensuring a stable network experience for essential tasks..Provides a One-Key VLAN feature, isolating ports 1-14 while enabling communication with ports 15 and 16, enhancing security and preventing broadcast storms..Offers a 32 Gbps switching capacity and supports both full-duplex and half-duplex operational modes for versatile performance..The device has a maximum power consumption of <12W and features an energy-efficient design, ensuring lower operating costs and eco-friendly performance..Certified for CE, FCC, and RoHS, meeting global safety, environmental, and electromagnetic compliance standards.

All 5 ports support Auto-MDI/MDIX, eliminating the need to worry about what type of cable to use. Featuring full duplex mode, the device can process data at a rate of up to 2000Mbps, making it an ideal choice for expanding your high performance wired network. Moreover, with innovative energy-efficient technology, the TL-SG105 can save energy up to 65%..Support IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode.Support QoS (IEEE 802.1p).Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput.10Gbps Switching Capacity, 2K MAC address table, 9KB Jumbo Frame, 1MB Buffer Memory.Auto-MDI/MDIX eliminates the need for crossover cables.Support MAC address auto-learning and auto-aging.Auto-negotiation ports allow smart integration between 10Mbps, 100Mbps, and 1000Mbps devices.Fanless design to keep a quiet environment.Support 100-240V power supply.TP-LINK’s TL-SG105 provides an easy way to expand your wired network.

The Axis Communications® T8516 managed PoE+ network switch is an easy to use 16 channel managed Ethernet switch that is optimized for surveillance solutions. The switch has web graphic user interface that provides a graphical overview of all connected devices in the system. This allows you to manage connected devices, reboot cameras in the system, cable diagnostics and to monitor the network traffic..PoE+ network switch is perfect for efficient network management.Number of ports: 18.Security: Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, ACL, Private VLANs, DHCP snooping.Dimensions: 1.73"H x 17.4"W x 8.31"D.Input power: 100 - 240 VAC, 50/60 Hz, Max 285 W, output power: PoE - IEEE 802.3af/at Type 2 Class 4, Max power budget - 240 W.Meets CE, EAC, SASO, EN 55032 Class A, EN 55024, FCC Part 15 Subpart B Class A, ICES-003 Class A, RCM, VCCI Class A, KCC, ANATEL, JATE standards.Network function: DHCP and NTP server included, VLAN.Jumbo frames: 9216 bytes.MAC table: 8 K.Throughput: 26.8 Mpps, switching capacity: 36 Gbps.Supported protocols: IPv4, IPv6, HTTP, HTTPS, QoS, Bonjour, UPnP, SNMP v1/v2c/v3, DNS, NTP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SSH, STP, RSTP, MSTP.Connectors PoE ports: RJ45 10BASE-T/100BASE-TX/1000BASE-T (port 1 - 16), combination ports: RJ45/SFP 100BASE-TX/1000BASE-T (port 17 - 18).Form factor: Desktop or rack-mountable.Includes installation guide, power cord, 19" ear rack kit, rubber feet (4x), SFP dust cover (2x).Weight: 6.1 lbs..Comes with 3 year warranty

The HP® 2930F 24G 4SFP manageable layer 3 switch has uplink port, 24 RJ-45 ports, four SFP ports and one serial console for connectivity. It works with PC. It measures 1.72" x 17.42" x 7.88". This rack-mountable switch supports twisted pair as well as optical fiber media, Gigabit Ethernet technology and 1000Base-X as well as 10/100/1000Base-TX network technology. It has AirWave network management, intelligent management center, command-line interface, web browser, configuration menu, SNMP manager, Telnet, RMON1 and FTP management. It comes with one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie..Manageable layer 3 switch offers an affordable solution for businesses of all sizes that requires simple network management.Dimensions: 1.72" x 17.42" x 7.88".Compatible with PC.Color: Black.Interface: Uplink port, modular, 24 x RJ-45, four SFP and one serial (console).Media type supported: Twisted pair, optical fiber, Layer supported: Three, Network technology: 1000Base-X, 10/100/1000Base-TX.Standards: IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, Jumbo frame size: 9220, Throughput: 41.7 Mpps.Management feature: AirWave network management, IMC - intelligent management center, command-line interface, web browser, configuration menu.MAC address table size: 32K entries, IPv4 routing table entries: 10000, IPv6 routing table entries: 5000.Authentication method: CHAP, PAP, RADIUS, TACACS and TACACS+.Memory and processor: Dual core ARM Coretex A9 at 1016 MHz, 1GB DDR3 SDRAM, Packet buffer size: 12.38MB 4.5MB Ingress/7.875MB Egress, 4GB eMMC.Operating temperature: 32 to 113 deg F, Storage temperature: -40 to 158 deg F, Operating humidity range: 15 - 95% (non-condensing).Form factor: 1U rack-mountable and desktop.Power source: Internal power supply, Nominal voltage: 120 VAC, Power consumption operational: 29.3 W.Contains switch, one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie.Meets REACH, 80 PLUS Silver, CISPR 22 Class A, CISPR 24, CNS 13438, CSA C22.2 No. 60950-1-07, VCCI Class A certifications and standards.Weight: 5.31 lbs..Comes with lifetime limited warranty

The Grandstream GWN7700MP is a high-performance 5-port 2.5G unmanaged network switch designed for home offices and small-to-medium businesses that demand fast, reliable connectivity. It features five multi-Gigabit RJ45 ports supporting 100/1000/2500Mbps speeds and one SFP+ fiber port offering 1G or 10G uplink capability. With IEEE 802.3af/at-compliant PoE on four ports, it powers IP phones, cameras, and access points directly through Ethernet. The fanless metal enclosure ensures whisper-quiet operation, while auto MDI/MDIX and auto-negotiation simplify setup. Advanced features like QoS, storm control, and energy-efficient Ethernet optimize performance and reduce power consumption. Wall or desktop mountable, the GWN7700MP is a plug-and-play solution for multi-Gigabit networking with smart PoE support..Supports 5 Ethernet ports with multi-gigabit speed and unmanaged switch configuration.Powers up to 4 devices via IEEE 802.3af/at-compliant PoE output.Delivers up to 2.5Gbps per port and 10Gbps via SFP+ uplink.Designed for desktop or wall mounting with compact metal housing.Prioritizes traffic using default strict QoS for smoother performance.Enables auto-negotiation, auto MDI/MDIX, and storm control for secure operation.Handles 45Gbps switching capacity with full-duplex and jumbo frame support.Reduces energy use with IEEE 802.3az energy-efficient Ethernet technology.Meets FCC, CE, RCM, and IC compliance standards for global use

The D-Link® DGS-1210 series DGS-1210-52MP Gigabit web smart switch offers 48 10/100/1000BASE-T PoE ports with 4 Gigabit SFP ports for optical connections using multimode or singlemode SFP transceivers. It supports IPv6 management to ensure the safety of your network and incorporates Green 3.0 technology to save power. Auto surveillance VLAN feature consolidates data and surveillance video transmission through the network and protects the quality of realtime video. The switch ensures protection against traffic flooding caused by virus attacks with safeguard engine. The IEEE 802.3x flow control function allows servers to directly connect to the switch to ensure fast and reliable data transfer..Ethernet switch.Dimension: 17.32" x 8.27" x 1.73", 19" standard rack mounting width, 1U height, Weight: 5.69 lbs. (91 oz).Comes in black color.Total number of network ports: 52, number of total expansion slots: 4.Media type supported: optical fiber, twisted pair.Expansion slot type: SFP.Supports IEEE 802.1p quality of service and supports DSCP.Auto surveillance VLAN, cable diagnostics, LLDP/LLDP-MED, auto voice VLAN.Comes with lifetime limited warranty.Ethernet switch supports IEEE 802.1p quality of service and supports DSCP. Auto surveillance VLAN, cable diagnostics, LLDP/LLDP-MED, auto voice VLAN.

The Aruba CX 6300 switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation, and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in highspeed uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multigigabit Ethernet for high speed APs and IoT devices..This smart switch contains 48x ports SmartRate 100M/1G/2.5G/5G BaseT, 2x 10G/25G/50G SFP ports, 2x 1G/10G/25G SFP ports (MACSEC).Supports up to 90W PoE per port for a total of 2880W of PoE.Provides high-performance 880 Gbps system switching capacity, 660 Mpps of system throughput and up to 200Gbps stacking bandwidth.Stackable for convenient use.Features SNMP v2c/v3.Supports Layer 3 capabilities with BGP, EVPN, VXLAN, VRF, OSPF with robust security and QoS, MACsec 256, PTP, AVB, LRM.Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.Four built-in QSFP28 ports support speeds of 1GbE, 10GbE, 25GbE, and 50GbE (50GbE for DAC connectivity only) for a total of up to 200 Gbps of stacking throughput per switch.Built-in high-speed 10GbE/25GbE/50GbE uplinks (50GbE for DAC connectivity only) with intelligent monitoring and visibility via Aruba Network Analytics Engine.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN networks.Automatically interrogates and analyzes events that can impact network health.Advanced telemetry and automation provide the ability to easily identify data sheet and troubleshoot network, system, application, and security-related issues easily.Delivers a very low latency, increased packet buffering, and adaptive power consumption

Ubiquiti USW-WAN is a managed switch designed for high-performance networks with high requirements. With 1 RJ45 1GbE port and 3 SFP ports , it provides flexibility and high throughput, ideal for a variety of network applications. With 10Gbps band width support and reliable integration with UniFi Network, this device will meet the needs of professional environments. Ubiquiti USW-WAN has 1 RJ45 1GbE port and 3 SFP ports , providing flexibility in the choice of network connections. With SFP ports , the switch supports 10G speeds, making it ideal for extended networks requiring high bandwidth. The manageable switch allows you to configure and manage your network easily and quickly. The switch offers power redundancy with two AC inputs, which increases the reliability of the device, ensuring network continuity even in the event of a power failure. The 100-240V AC-based power supply makes the device suitable for a variety of environments. The Ubiquiti USW-WAN is a solution that ensures stability and uninterrupted operation in professional networks. The Ubiquiti USW-WAN integrates seamlessly with the UniFi Network system, enabling full network management. With the UniFi system, you gain access to advanced features such as monitoring and configuration of the device and network. The manageable switch makes network administration easy, and thanks to its intuitive interface, configuration is quick and simple. The Ubiquiti USW-WAN is made of sturdy SGCC steel material, which ensures durability and resistance to mechanical damage. The unit weighs just 2.3 kg with mounting brackets, making it easy to mount in a rack. The managed switch is also equipped with ESD/EMP surge protection, which ensures the longevity of the device and increases network security..The switch features 1 Gigabit Ethernet RJ45 port and 3 high-speed 10G SFP+ ports, delivering enterprise-grade performance with full Layer 2 managed capabilities for seamless integration into UniFi Network environments.Enjoy non-blocking throughput of 10 Gbps and a switching capacity of 20 Gbps, ensuring fast and efficient data handling for demanding network applications.Designed for professional setups, the switch comes in a compact 1U rack-mountable form factor, making it ideal for data centers and enterprise environments.Manage the device easily via UniFi Controller, with advanced security features like ESD protection (±16kV air, ±22kV contact) and redundant power inputs for uninterrupted operation.The switch offers carrier-grade throughput with 15 Mpps forwarding rate, supporting Shadow Mode High Availability for linking dual UniFi Gateways to a single ISP.With a maximum power draw of only 13W, the switch is energy-efficient while providing dual AC inputs for redundancy and reliability.Comes with a standard 2-year warranty

UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability..Managed switch contains 8 x 10G SFP+ ports.Rack-mountable with mounting hardware (included).Supports up to 80Gbps of total non-blocking throughput, 160Gbps of switching capacity, and 119.04Mpps of forwarding rate.Maximum power consumption: 30W.Meets or exceeds the CE, FCC, and IC standards.Offers silent fanless cooling operation.Features a 1.3" touch-screen LCM display.Supported voltage range: 100-240VAC.36W AC-powered (power adapter is included).1-year manufacturer limited warranty

The TRENDnet TPE-TG240G Ethernet switch is a rack mountable switch that has sturdy metal construction. It has 24 Gigabit PoE+ ports and works on 370 W power. It includes LED indicators to indicate port status. All Gigabit ports generate a 48 Gbps switching capacity and have jumbo frames up to 10KB..Managed Gigabit Ethernet switch.24 ports, 24 x PoE+ (RJ-45), 24 x Gigabit Ethernet network.Dimensions: 1.7"D x 17.3"W x 9.8"D.Power: 120 - 230 VAC (input voltage), power source: Power supply, PoE budget: 370 W, power consumption: 36 W.Meets CE, FCC standards.Media type supported: Twisted pair, network technology: 10/100/1000Base-T, Ethernet technology: Gigabit Ethernet.Layer supported: 2.Form factor: Rack-mountable, desktop.Network standard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x.Jumbo frame: 10KB, MAC address: 8K entries, switching capacity: 48 Gbps.PoE circuit sorting protection, PoE overcurrent protection, rugged.Includes TPE-TG240g, quick installation guide, rack mount kit, power cord.Weight: 8 lbs..Comes with lifetime limited warranty

Quickly and easily expand your business's network capacity to support additional computers, servers, access points, and other devices with the Netgear MS105 5-Port 2.5G Unmanaged Network Switch. Featuring five 2.5G speed Ethernet ports with a 25 Gb/s switching capacity 3.72 Mpps forwarding rate, this unmanaged switch is designed to deliver fast and smooth data transfers. Simply connect the switch to your network to get started. No complicated setup or configuration is required..Equipped with 5 Ethernet ports, supports Multi-Gigabit Ethernet speeds, and operates as an Unmanaged Switch.Each port on the device delivers data transfer speeds of up to 2.5 Gbps.Compact desktop form factor with optional wall-mounting capability.Total switching throughput of 25 Gbps and operates in a non-blocking, full-duplex mode for optimal performance.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Simple set up with no software or configuration needed.Easy monitoring through per port LEDs for port activity and speed.Energy Efficient Ethernet (IEEE 802.3az) support for maxium power savings.Non-blocking switching architecture for maximum throughput at wire speed.Limited Lifetime Hardware Warranty

xpand your small-to-medium size business's network capacity with the M4300-52G-PoE+ 50-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear. This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets such as hot-swappable mixed stacking, with up to eight switches in a single logical switch, but no license requirements to support video broadcast and other high-bandwidth applications. With 48 PoE+ compliant Gigabit Ethernet ports and a 480W power budget, you can provide power and data to IP cameras, access points, VoIP phones, and more. This switch includes 550W power supply with support for a second PSU for redundancy and increased PoE capacity. The M4300-52G-PoE+ also includes two 10G RJ45 ports alongside two 10G SFP+ ports for high-speed uplinks. The M4300-52G-PoE+ is designed to smoothly transfer data with a 176 Gb/s switching capacity and 714 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection..48 Ethernet ports, belongs to the Compliant performance class, and is a Managed network switch..IEEE 802.3af/at PoE+ with a total power budget of up to 480W (expandable to 720W with dual PSUs)..10Gbps connectivity through two 10GBASE-T and two 10G SFP+ uplink ports..Features a 1U rack-mountable form factor for efficient integration in enterprise environments..Supports SNMP v1, v2c, and v3 for advanced network monitoring and management..Comprehensive QoS features include traffic prioritization, bandwidth control, and advanced queuing for optimized performance..Offers web-based GUI, CLI, RMON, sFlow, and robust security with ACLs, DHCP snooping, and 802.1X authentication..Provides a non-blocking switching capacity of 176Gbps with Layer 2/3/4 operational modes and IPv4/IPv6 support..Maximum power consumption is approximately 600W under full PoE load, with energy-efficient Ethernet (EEE) for reduced power usage..Complies with IEEE 802.3 standards, CE, FCC, UL, and RoHS certifications for safety and environmental compliance..Switching capacity: 176 Gbps.Has cost effective 1G access layer in campus LAN networks and high performance 10G distribution layer for midsize organizations networks.Features innovative mixed "Spine and Leaf", 1G and 10G stacking with non-stop forwarding and hitless failover redundancy.SDN-Ready OpenFlow 1.3 support for maximum investment protection.Service port is great for out-of-band Ethernet management (OOB).Weight: 14.44 lbs..Comes with lifetime warranty

A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output..48-port, Layer 3 Etherlighting switch with 2.5 GbE and PoE++ output.Supports Power over Ethernet.Offers 166.66Mpps forwarding rate, 224Gbps switching capacity, and 112Gbps total non-blocking throughput.Rack-mountable.Managed with UniFi Network 8.0.24 and later.Maximum power consumption: 100W (excluding PoE output).Contains 16 2.5 GbE ports including eight PoE+ and eight PoE++, 32 GbE ports including 24 PoE+ and eight PoE++, four 10G SFP+ ports.Etherlighting ports that illuminate to indicate port location, speed/link, and native VLAN/network.1.3" touch-screen LCM display for convenient use.Provides 720W total PoE availability.DC power backup ready.Meets or exceeds CE, FCC, IC standards

4Ã- 10 Gbps SFP+ Slots 24Ã- Gigabit PoE+ Ports 384 W Total PoE Budget Centralized Management Omada App Zero-Touch Provisioning Ethernet Ring Protection Switching Static Routing Easily Build a Whole 10G Multi-gigabit Network | 10G Router Ensures the fast way Full 10G Fiber Switch Lightning-fast aggregation switching Switch with 10G Uplink PoE Switch with 10G Uplink Wi-Fi 7/6 APs with 10G/2.5G Ports Software Defined Networking (SDN) with Cloud Access Remotely manage your access points, switches, and gateways across multiple sites all from a single interface. Multiple Application Scenarios | Surveillance Works with IP Cameras Conference Call Works with IP Phones Wi-Fi Coverage Works with Access Points Wired Connections Works with Non-PoE Devices such as PCs and Printers More from the Manufacturer.24Ã- Gigabit 802.3af/at PoE+ ports.384 W total PoE budget with up to 30 W PoE output per port.Centralized cloud management via the web or the Omada app.Standalone management via web, CLI, SNMP, and RMON

The Grandstream GWN7706 is a plug-and-play 48-port Gigabit unmanaged switch designed for small to medium businesses. With 100Gbps switching capacity and auto MDI/MDIX support, it delivers seamless high-speed connectivity without the need for configuration. Each port auto-negotiates to optimize performance across 10/100/1000Mbps devices. Built with a durable metal enclosure, it supports desktop and rack-mount installations. The GWN7706 also features IEEE 802.3x flow control and 802.1p QoS for reliable traffic handling, making it a cost-effective solution for expanding network capacity with minimal effort..Delivers 48 Gigabit Ethernet ports with unmanaged switching for simple plug-and-play use..Handles up to 100Gbps switching capacity for fast and reliable data flow..Built with a metal enclosure suitable for desktop or rack-mount installation..Traffic is prioritized using 802.1p/DSCP QoS for smoother performance..Security features are minimal, focused on auto-negotiation and MAC address learning..Operates in full-duplex mode with auto MDI/MDIX and auto-negotiation on all ports..Consumes up to 30W power with internal supply and supports energy-efficient operation..Certified by FCC, CE, RCM, IC, and UKCA for global compliance.

Build and expand your network with the Ubiquiti UniFi Pro Aggregation switch. The UniFi switch is a configurable 10G Layer-3 switch. It offers 28 10G SFP+ fiber links to your devices and 4 25G SFP28 fiber uplink options to your enterprise network. Features a 1.3" touch LCM. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Controller with UniFi Mobile app support, the UniFi Switch offers an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Rack mountable configurable 10G fiber Layer-3 switch.Offers 28 10G SFP+ fiber links to your devices and four 25G SFP28 fiber uplink options to your enterprise network.Managed and configured by the UniFi Controller with UniFi Mobile app support.Offers 380Gbps of total non-blocking throughput, 760Gbps switching capacity, and 565.44Mpps forwarding rate.Dimensions: 1.7"H x 17.4"W x 12.8"D.Max power consumption: 100W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Features 1.3" touch screen with AR switch management.Provides an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server.Made of SGCC steel and comes in silver.2-year manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 12x 2.5Gbps Ethernet and 2x 10Gbps SFP+ ports engineered for 1Gb AV over IP.100Gbps (10/100/1000/2500Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Grandstream GCC6011 is a robust all-in-one networking and unified communications solution designed for high-demand business environments. It integrates a 2.5Gbps VPN router, next-gen firewall, IP PBX, and managed switch into a single metal-encased unit. With 10 Gigabit Ethernet ports, 2x 2.5Gbps SFP ports, and 4 PoE outputs, it delivers secure, high-speed connectivity and centralized control. Advanced features include DPI, IDS/IPS, encrypted VPN protocols, and VoIP prioritization. Ideal for desktop, wall, or rack-mount setups, the GCC6011 is managed via GDMS, mobile app, or local interface and supports up to 500 clients and 150 APs..Integrates 10 Ethernet ports with managed switching, IP PBX, firewall, and VPN routing..Provides 4 PoE output ports with IEEE802.3af/at support and 36W total power budget..Delivers 2.5Gbps router throughput and 1Gbps IPsec VPN for secure remote access..Built with a durable metal housing for desktop, wall, or rack-mount installation..SNMP v1/v2c/v3 enables remote monitoring and device management..Secures networks with DPI, SSL proxy, IDS/IPS, and content filtering tools..Handles up to 160K NAT sessions and supports 12 PBX users by default..Operates on 48W power with efficient design and universal adapter..Certified for FCC, CE, RCM, and IC compliance.

The Aruba 2930F Switch Series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These convenient Layer 3 network switches include built-in uplinks and PoE power, and are simple to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central. A powerful Aruba ProVision ASIC delivers performance, robust feature support and value with programmability for the latest applications. Stacking with Virtual Switching Framework (VSF) provides simplicity and scalability. The 2930F supports built-in 1GbE or 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required. The Aruba 2930F Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Provisioning. The robust basic Layer 3 feature set includes a lifetime manufacturer limited warranty..Switch designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach.48 RJ-45 autosensing 10/100/1000 PoE+ ports, four SFP+ 1/10GbE ports; PHY-less dual-personality (RJ-45 or USB micro-B) serial console port.Dimensions: 1.73"H x 17.42"W x 11.98"D.Rack-mountable.Voltage: 100-127VAC/200-240VAC.Lifetime manufacturer limited warranty.Processor: ARM Cortex dual core 1016 MHz or ARM Cortex-A9 dual core 1016 MHz.Memory: 1GB DDR3 SDRAM, 4GB eMMC.Throughput: Up to 112 Mpps, switching capacity: 176 Gbps.Form factor: 1U rack mountable, desktop.Routing table size: 10000 entries (IPv4), 5000 entries (IPv6), MAC address table size: 32768 entries.Management: Aruba AirWave network management, IMC, command line interface, graphical user interface, SNMP manager, Telnet.Temperature: 0 to 45 deg C (operating), -40 to 70 deg C (storage).Meets UL 69050-1, CSA 22.2, EN 55022:2010/CISPR 22 Class A, FCC, VCCI Class A, ICES-003 Class A, CNS 13438 standards.Weight: 9.83 lbs..Comes with lifetime limited warranty

Expand your network with the Ubiquiti eight-port layer 2 PoE switch supporting silent fanless cooling. Features four GbE, PoE+ RJ45 ports and four GbE RJ45 ports. Managed with the UniFi Network application: version 7.2.94 and late..Compact eight-port layer 2 PoE switch supporting silent fanless cooling.Features 4 x RJ45 (GbE, PoE+) ports and 4 x RJ45 (GbE) ports.Total non-blocking line rate: 8Gbps.Max power consumption: 8W.Meets or exceeds CE, FCC, IC standards.Power adapter included (54VDC, 1.1A).Maximum PoE+ wattage per port by PSE: 30W.Dimensions: 1.25"H x 6.44"W x 3.92"D.Managed with the UniFi Network application (version 7.2.94 and later).Wall-mountable (kit is included)

The Grandstream GWN7813 is a high-performance Layer 3 managed network switch designed for medium-to-large enterprises seeking scalable, secure, and intelligent networking. Equipped with 24 Gigabit Ethernet ports and 4 10G SFP+ uplink ports, it delivers a total switching capacity of 128Gbps and non-blocking throughput of 64Gbps. Advanced features include dynamic routing (RIP, OSPF, BGP), 4K VLAN support, IGMP/MLD snooping, and comprehensive QoS for traffic prioritization. Security is reinforced with ARP inspection, IP source guard, DoS protection, port isolation, and MAC authentication. The GWN7813 supports stacking of up to 4 devices and integrates seamlessly with Grandstream’s GDMS Networking and GWN Manager platforms for centralized cloud or on-premise management. With PoE++ support on ports 1–8, it powers IP phones, cameras, and access points efficiently. Designed for desktop, wall, or rack mounting, and backed by enterprise-grade reliability, the GWN7813 is ideal for building robust business networks..Features 24 Gigabit ports and 4 10G SFP+ uplinks in a managed Layer 3 switch.Powers PoE/PoE++ devices with smart dynamic allocation on ports 1–8.Delivers 128Gbps switching capacity and 64Gbps non-blocking throughput.Mounts easily on desktop, wall, or rack with included hardware.Supports SNMP v1, v2c, and v3 for remote monitoring and diagnostics.Prioritizes traffic using advanced QoS with multiple queue scheduling modes.Secures networks with 802.1X, MAC auth, DoS protection, and DHCP snooping.Enables dynamic routing with RIP, OSPF, BGP, and policy-based controls.Reduces power use with energy-efficient Ethernet and fan/power monitoring.Complies with FCC, CE, RCM, IC, and UKCA certifications for global deployment

The Aruba CX 6200 Switch Series is a next-gen family of stackable access switches ideal for enterprise branch offices, campuses, and SMB networks. Created for game-changing operational efficiency with built-in analytics and automation, the CX 6200 switches provide an enterprise-class access layer solution that's simple and secure..Includes 24 Gigabit Ethernet ports, supports high-performance switching, and offers advanced managed network control through multiple interfaces..Supports Class 4 PoE on all 24 ports, delivering up to 30W per port for powering devices like IP phones and cameras..Supports 10 Gbps data transfer rate through its SFP+ uplink ports for high-speed connectivity..Built in a 1U rack-mountable form factor, ideal for streamlined installation in network cabinets and data centers..Supports SNMP v1, v2c, and v3, enabling secure and flexible network monitoring and device management..Supports Quality of Service features to prioritize bandwidth for critical applications like voice, video, and real-time data..Delivers up to 95.2 Mpps throughput and supports Layer 2 and Layer 3 switching modes for flexible network operations..Consumes up to 740W with full PoE load and incorporates Energy Efficient Ethernet (EEE) and smart cooling for optimized power savings.

Aruba 2930M 24G POE+ 1-SLOT JL320A switch is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. This Layer 3 network switch is easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave and cloud-based Aruba Central. A powerful Aruba ProVision ASIC delivers performance, robust feature support, and value with flexible programmability for the latest applications. Aruba 2930M 24G POE+ 1-SLOT JL320A switch provides a simple and powerful access layer solution that can be quickly set up at branch offices with little or no IT support using Zero Touch Deployment. The switches include a Limited Lifetime Warranty..Ethernet switch designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach.Throughput: up to 100Gbps, switching capacity: 128Gbps.20 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T, IEEE 802.3at PoE+); four Combo 10/100/1000BASE-T or 100/1000Mbps SFP Ports.Dimensions: 1.73"H x 17.42"W x 12.77"D.Comes with an accessory kit that includes thebrackets for mounting the switch in a standard 19" telco rack or in an equipment cabinet. Also included arerubber feet that can be attached so the switch can be securely positioned on a horizontal surface.Voltage: 100-127/200-240 VAC.Meets or exceeds UL 60950-1, 2nd Edition; EN 60950-1:2006 +A11:2009: A1:2010 +A12:2011 +A2:2013, IEC60950-1:2005 +A1:2009 +A2:2013, CSA 22.2 No. 60950-1-07 2nd, EN60825-1:2007 /IEC 60825-1:2007 Class 1 certifications.Additional ports and slots: one dual-personality (RJ-45 or USB Micro-B) serial console port; one USB-B port for uploading/downloading files; one 100BASE-T out-of-band management port; one uplink slot; one stacking module slot; two power supply slots (power supplies not included).Layer 3 switch with 10 chassis backplane stacking, static, RIP and access OSPF routing, Dynamic Segmentation, ACLs, SDN, and robust QoS.Supports advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave, and Aruba Central.Up to 60W PoE per port (IEEE 802.3bt Class 6) for high power devices.Software defined ready with REST APIs and OpenFlow support.Simple deployment with Zero Touch Provisioning.Lifetime manufacturer limited warranty

The USW-Pro-XG-8-PoE offers eight (8) multi-speed 10GbE RJ45 ports with PoE++ support, delivering a total PoE budget of 155W — ideal for powering next-generation access points, IP cameras, and other high-performance devices. The two (2) 10G SFP+ ports provide robust fibre uplink options, while Etherlighting technology enables intuitive port status monitoring to streamline troubleshooting. With a 200 Gbps switching capacity and 149 Mpps forwarding rate, this switch is engineered for low-latency, high-throughput environments. It supports up to 1,000 VLANs and a MAC address table of 32,000 entries, handling complex network configurations with ease. Layer 3 features such as inter-VLAN routing, DHCP server and relay, and static routing provide advanced traffic segmentation and control. The rugged SGCC steel enclosure, fanless design, and compact desktop or wall-mountable form factor make it ideal for office, studio, or edge deployments. Fully integrated with the UniFi Network Application, the USW-Pro-XG-8-PoE offers centralised configuration, monitoring, and firmware updates across your UniFi deployment, simplifying day-to-day operations and scaling..This switch features 8 x 10G RJ45 PoE++ ports and 2 x 10G SFP+ uplink ports, delivering enterprise-grade Layer 3 management for advanced routing and VLAN configurations.It supports PoE++, providing up to 60W per port with a total PoE budget of 155W, ideal for powering access points, cameras, and other high-demand devices.The switch offers a switching capacity of 200 Gbps, non-blocking throughput of 100Gbps, and a forwarding rate of 149Mpps, ensuring ultra-fast data handling for demanding networks.Designed as a compact desktop or wall-mountable unit, it combines professional-grade performance with space-saving flexibility.While primarily a wired solution, it seamlessly integrates with UniFi wireless access points via PoE++, enabling a unified wired and wireless network infrastructure.The switch supports SNMP for network monitoring and management, making it suitable for enterprise environments requiring centralized control.Advanced Quality of Service (QoS) features, including DSCP and Pro AV profiles, ensure optimized traffic prioritization for voice, video, and critical applications.It offers robust security with 802.1X authentication, DHCP snooping, MAC-based ACLs, and IP-based isolation, along with UniFi Network software for centralized management.Supports Layer 3 functionality, including DHCP server, inter-VLAN routing, and static routing, enabling advanced network segmentation and control.The switch consumes 61W without PoE and up to 220W with PoE output, powered by an external AC/DC adapter, ensuring efficient energy use for high-performance operations.Comes with a 2-year manufacturer warranty

The Aruba CX 6300 Switch Series is a flexible, and intelligent family of AOS-CX stackable switches ideal for access, aggregation, and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in highspeed uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multi-gigabit Ethernet for high speed APs and IoT devices..Layer 3 managed switch with 48 x Gigabit Ethernet and 4 x SFP/SFP+/SFP28/SFP56 ports.48 PoE+ ports (30W/port) provide power to connect your devices with a single wire.496Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2c/v3 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management.Throughput: up to 369Mpps.Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike.Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking.Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application and security related issues easily, through the use of Python agents and REST API.Power-to-port airflow construction is designed for top-of-rack (TOR) and out-of-band-management (OOBM) data center deployments

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 16x 10Gbps SFP+ ports (first 12 ports support 1Gbps) engineered for 1Gb AV over IP.320Gbps line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Aruba 2930M Switch Series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 network switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave and cloud-based Aruba Central. A powerful Aruba ProVision ASIC delivers performance, robust feature support, and value with flexible programmability for the latest applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The flexible 2930M supports wire speed 10GbE and 40GbE uplinks, redundant dual modular power supplies for up to 1440 Watts of PoE, and new models with industry standard IEEE 802.3bt Class 6 that provide up to 60W of PoE per port. HPE Smart Rate multi-gigabit Ethernet models paves the way for high speed APs and IoT devices by delivering fast connectivity and PoE power using existing campus cabling. The feature rich 2930M supports a robust QoS, RIP, Access OSPF routing, PIM, VRRP, IPv6 and Dynamic Segmentation for unified and secure access. The Aruba 2930M Switch Series provides a simple and powerful access layer solution that can be quickly set up at branch offices with little or no IT support using Zero Touch Deployment. The switches include a lifetime manufacturer limited warranty..Switch designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach.44 autosensing 10/100/1000 ports, dual personality (RJ-45 or USB Micro-B) serial console port, USB-A port, 100BASE-T Out of Band management port.Dimensions: 1.73"H x 17.42"W x 12.77"D.Rack-mountable.Lifetime manufacturer limited warranty.Power: 200 - 240 VAC, 1350 W (typical), 1650 W (maximum).Memory: 1GB DDR3 SDRAM, 4GB flash.Processor: 1.016 GHz ARM Cortex-A9.Capacity: 2000 IPv4 routing table entries, 1000 IPv6 routing table entries, 10000 RIP routes, 256 static routes.Jumbo frame support: 9220 bytes, MAC address table size: 32768 entries, Remote management: CLI, HTTP, RMON 1, SNMP, SNMP 1, 2 , 2c , 3, SSH, SSH-2.Network: L3 advanced switching, Routing protocol: CIDR, ECMP, IGMP, IGMPv2, IGMPv3, OSPFv3, RIP, RIPng, Static IPv4 and IPv6 routing.Form factor: Rack mountable, features ACL, ARP, BOOTP, DCBX support, IRDP, LACP, MSTP, MVRP, NDP, UDLD, VLAN, VXLAN, ToS.Temperature: 0 to 55 deg C operating, -40 to 158 deg F storage, Humidity: 15 - 95 % non-condensing.Meets 80 PLUS Silver, CISPR, EN, CNS/CSA, FCC, ICES, IEC, VCCI certifications and standards.Weight: 10.25 lbs..Comes with limited lifetime warranty.Managed Ethernet switch features high performance Layer 3 access switches and optimized for innovative SDN applications with openflow.

Ubiquiti UniFi Switch Lite 16 PoE is a fully managed Layer 2 switch with sixteen Gigabit Ethernet ports for your RJ45 Ethernet devices. Eight ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 45W for UniFi Access Points or other PoE devices. Managed and configured by the UniFi Network application with UniFi mobile app support, the UniFi Switch Lite 16 PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Fully managed layer 2 switch with 16 Gigabit Ethernet ports for your RJ45 Ethernet devices.Dimensions: 1.72"H x 7.55"W x 7.28"D.Comes in white.16 Gigabit RJ45 ports including eight 802.3at PoE+.Managed with UniFi application.60W power supply.Wall-mountable (kit included)

The Grandstream GWN7821P is a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large enterprises. It features 8 x 2.5 Gigabit Ethernet ports and 2 SFP+ uplink ports, delivering scalable and secure connectivity. With dynamic PoE/PoE+/PoE++ support, advanced QoS, and ACL-based security policies, it ensures reliable traffic prioritization and flexible access control. The switch supports IPv4/IPv6 networks and offers fault detection, dual boot, and link aggregation for enhanced resilience. Managed via GDMS, CLI, or GWN Manager, the GWN7821P simplifies network deployment and supports stacking for unified control..Features 8 multi-gigabit Ethernet ports with Layer 3 managed switching capabilities..Supports PoE, PoE+, and PoE++ with smart power control across connected devices..Enables 2.5Gbps data throughput for high-speed enterprise networking..Built in a rack-mountable form factor with desktop and wall-mount options..SNMP support allows remote monitoring and network diagnostics..Prioritizes traffic using built-in QoS and multiple scheduling methods..Secures access with ACL filtering, storm control, and dual system redundancy..Operates in full-duplex mode with support for stacking and link aggregation..Consumes power efficiently with dynamic PoE allocation and internal supply..Complies with FCC, CE, RCM, and IC certifications for global deployment.

The Grandstream GWN7830 is a high-performance Layer 3 aggregation switch built for enterprise-grade networking. Designed to support scalable and secure infrastructures, it features 2 Gigabit Ethernet ports, 6 Gigabit SFP ports, and 4 10Gigabit SFP+ ports for flexible connectivity. With a powerful switching capacity of 96Gbps and advanced QoS capabilities, it ensures smooth traffic prioritization across demanding environments. Integrated security protocols like ARP inspection, IP source guard, and DHCP snooping help protect against network threats. The GWN7830 also supports SNMPv3 and dynamic routing protocols including OSPF and BGP, making it ideal for medium-to-large deployments. Management is simplified via local web UI, CLI, and Grandstream’s GWN.Cloud and GWN Manager platforms..Equipped with 2 Ethernet ports and enterprise-grade Layer 3 managed switching capabilities..Delivers a robust data transfer rate of 48Gbps for high-speed networking..Designed in a rack-mountable form factor with desktop and wall-mount options..Enables network monitoring through SNMPv1, SNMPv2c, and SNMPv3 protocols..Prioritizes traffic using built-in QoS with multiple queue scheduling methods..Enhances security via 802.1X, MAC auth, DoS protection, and DHCP snooping..Supports store-and-forward mode with 96Gbps switching capacity and 71.424Mpps forwarding rate..Operates efficiently with a 30W power supply and surge protection up to ±6KV..Meets global standards including FCC, CE, RCM, IC, and UKCA certifications.

The Grandstream GWN7711P is a compact Layer 2 Lite managed switch designed for small-to-medium businesses seeking secure, scalable, and cloud-manageable networking. It features 8 Gigabit Ethernet ports, including 4 PoE ports with dynamic PoE/PoE+ power allocation. With support for VLAN, QoS, IGMP snooping, and storm control, it ensures optimized traffic flow and network protection. The GWN7711P is managed via embedded controller, GDMS, or GWN Manager, and supports desktop or wall-mount installation. Its robust feature set and compact design make it ideal for offices, hotels, and remote deployments..Offers 8 Gigabit Ethernet ports with Layer 2 Lite managed switching..Provides 4 PoE ports with dynamic PoE/PoE+ power allocation..Delivers 16Gbps switching capacity and 11.9Mpps forwarding rate..Designed for desktop or wall-mount installation in compact spaces..SNMP and LLDP enable remote monitoring and device discovery..Prioritizes traffic using QoS with DSCP, port, and 802.1p mapping..Enhances security with DHCP snooping, storm control, and loop prevention..Supports VLAN segmentation, voice VLAN, and IGMP snooping..Operates efficiently with 4MB buffer and 8K MAC address table..Certified with FCC, CE, RCM, and IC for global compliance.