Power Over Ethernet Hubs

Supply power to PoE devices on demand. The SRPM24 Power over Ethernet (PoE) midspan is ideal for adding PoE functionality to an existing network. Many network devices such as wireless access points and IP telephones support PoE to power the device instead of connecting to a power outlet. The benefits of using PoE include cost savings from not requiring new power outlets to be installed in remote locations, easier portability of devices, more freedom of where to place devices, and providing a central source for supplying power backup. The SRPM24 is designed to be scalable, so only PoE powered devices need to be connected to the unit and non-PoE devices can connect directly to a switch. For ease of management, the SRPM24 supports both SNMP, CLI command line, and a web-based interface to monitor and manage the device..Input Ports: 24 10/100Base-TX.Output Ports: 24 10/100Base-TX.Input Voltage: 240 V AC

The HP® Aruba 2930F 24-port PoE+ fixed port managed Gigabit Ethernet switch provides high-performance and resiliency for a digital workplace campus network. A powerful Aruba ProVision ASIC delivers performance and value, supporting the latest SDN applications with future proof programmability, as well as it supports 10GbE uplinks, PoE+, robust QoS and RIP routing. The switch provides better application experience with low latency and virtualization. The switch provides you an unmatched quality of service with trusted security that meets corporate policies and compliance requirements. The switch supports Aruba ClearPass policy manager for unified and consistent policy between wired and wireless users with simplified implementation and management for guest login, network access and other network policies..Fixed port managed gigabit Ethernet switch provides a reliable infrastructure for your business network.Dimensions: 4.39 cmH x 44.25 cmW x 30.42 cmD.Compatible with PC.Comes in black color.Memory: 1GB DDR3 SDRAM, buffer memory: 12.38MB 4.5MB Ingress/7.785 Egress, 4GB eMMC, processor: Dual Core ARM Coretex A9 at 1016 MHz.Interfaces/ports: 24 x RJ-45 autosensing 10/100/1000 PoE+ ports, 4 x SFP.Media type supported: Twisted pair, optic fiber, network technology: 10/100/1000Base-T, 1000Base-X.Layer supported: 3.Ethernet technology: Gigabit Ethernet.MAC address table: 32K entries.Throughput: Up to 41.7 Mpps, routing/switching capacity: 56 Gbps.Latency: 1000 Mbps latency: < 3.8 us.Management: Aruba AirWave network management, IMC - Intelligent Management Center, command-line interface, web browser, configuration menu.Power: 120 - 230 VAC 50/60 Hz redundant power supply, PoE capability: 370 W PoE+.Form factor: 1U rack-mountable, Desktop.Includes Aruba 2930F 24G PoE+ 4SFP switch, 1 x power cord, 1 x screw kit, 4 x mounting ears, 4 x bumper feet, 1 x cable tie.Meets FCC part 15 Class A, VCCI Class A, EN 55022 Class A, CISPR 22 Class A, EN 55024, EN 61000-3-2 2000, 61000-3-3, ICES-003 Class A, RoHS standards.Weight: 3.9 kg.Comes with limited lifetime warranty

The HP J9986A 24-port managed Gigabit Ethernet switch is perfect for data networking and has data transfer rate up to 1 Gbps. It is compatible to use with 5400R zl2 switch series. This switch supports Gigabit Ethernet 1000Base-T technology for reliable data transfer. It includes RJ-45 1000Base-T network LAN ports for connectivity..Gigabit Ethernet switch ensures to provide enterprise-class resiliency and innovative flexibility as well as scalability to mobile-first networks.Dimensions: 1.8"H x 10.3"W x 8.1"D.Compatible with PC.Has 24 RJ-45 autosensing 10/100/1000 PoE+ Gigabit Ethernet ports for connectivity.Features Freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD card and 4GB DDR3 SODIMM for reliable performance.Latency: 1000MB latency: < 2.8 us, 10 Gb/s latency: < 1.8 us, 40 Gb/s latency: < 1.5 us.Throughput: Up to 1142.8 Mpps.Switching capacity: 1920 Gb/s, Switch fabric speed: 2030 Gb/s.PoE+ internal power supply delivers constant power.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T.Form factor: Plug-in module.Contains HP 5412R zl2 switch and three HP 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 module J9986A.REACH and Green compliant.Weight: 45.19 lbs..Comes with lifetime limited warranty

The EnGenius power-over-Ethernet adapter is suitable for connecting APs, IP cameras, VoIP phones and more. This adapter has an optimal port design that ensures easy, precise mounting or positioning. It has 2 Gigabit Ethernet ports that help in connecting to a switch and PoE-enabled device. The built-in surge protection assures maximum security to your valuable network equipment from electrostatic discharge and lightning strikes. The included hardware provides easy placement of your adapter on walls, structured wiring enclosures and ceilings. It extends the power to the unwired areas up to 328'..Meets IEC 60950-1:2005+A1, UL60950-1, ENS55022:2010, EN55024:2010, FCC part 15 class B, FCC and CE standards and certifications.Physical interface: (1) Gigabit data port, (1) Gigabit data & power output port, (1) IEC-320 C6 AC connector.Power on green LED.Wall mounting and includes anchors and screws.Electrical rating: 100 to 240 VAC input voltage, 0.8 A Max for 100 VAC Input Current, 47-63 Hz AC input frequency, 32.8 W maximum output power.Power lines: Pin4, 5: 54 V, Pin7, 8: Return.Includes EPA5006GP and power cord.Comes with 1 year warranty.Single port gigabit power-over-ethernet adapter will disconnect, short-circuit and surge protection ensures reliable, secure connections.

Cisco Catalyst C9300-48T-A Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud. The Cisco Catalyst 9300 series switches are Cisco's lead stackable enterprise switching platform. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 series switches form the foundational building block for software-defined access (SD-Access), Cisco's lead enterprise architecture. At up to 480 GB/s, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave 2. It sets new maximums for network scale. These switches are also ready for the future, with a x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud.Comes in gray.At up to 480GB/s, these Ethernet switches are a stacking bandwidth solution with the flexible uplink architecture.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.CPU complex x86 with 8GB memory and 16GB flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB storage with an option SSD drive) to host containers.USB 2.0 slot to load system images and set configurations.Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of fixed or modular uplinks.Leading PoE capabilities with up to 384 ports of PoE per stack, 60W Cisco UPOE, and PoE+.Intelligent power management with StackPower technology providing power stacking among members for power redundancy.Line-rate, hardware-based flexible NetFlow (FNF) delivering flow collection of up to 64000 flows.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.IEEE 802.1BA Audio Video Bridging (AVB) is built in to provide a better audio and video experience through improved time synchronization and QoS.Precision time protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Software-defined access for faster launch of new business services and significantly improved issue resolution time.Customers with the Network Advantage Stack software feature sets are provided with maintenance updates and bug fixes designed to maintain compliance of the software.Lifetime manufacturer limited warranty; 90-day Cisco technical assistance center support

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Number of Ethernet Ports 16, Network Management Type Managed.Network Technology: 10/100/1000Base-T.Ethernet Technology: Gigabit Ethernet.Switch Form Factor: Rack-mountable, Desktop.Wireless Connectivity: Not Applicable.Power Source: Power Supply.Media Type Supported: Twisted Pair.Limited Lifetime Warranty

37% off  of Netgear 300-Series GS324P 24-Port Gigabit Ethernet Unmanaged Switch

Netgear 16 PoE+ ports with 190W power budget. Unmanaged 300-Series PoE switches are easy, reliable, and affordable network connectivity for home and small offices. Providing power and data from a single Ethernet cable..Unmanaged PoE switch is easy, reliable, and affordable network connectivity for home and small offices.Dimensions: 1.7"H x 13"W x 8.1"D.Comes in black durable and rugged metal case.24 Gigabit ports.Simple set up with no software to install or configuration needed.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design minimizes noise pollution, making the switch ideal for noise-sensitive environments.Designed to optimize power usage, lowering its cost to operate

The EDS4100 is the first external device server to deliver an enterprise-grade, programmable device computing and networking platform for integrating edge equipment into the enterprise network..Ports: 4 x DB 9, 1 x RJ 45.Dimensions: 3.8"(H) x 17.7"(W) x 12.7"(D).Compatibility: PC.Form factor: Wall mountable, Processors installed: 1 x 266 MHz.Ethernet technology: Fast ethernet, Data link protocol: Ethernet, fast ethernet, RS 232, RS 422, RS 485.Interface/ports: 2 x serial - RS 232 - 9 pin D Sub (DB 9), 2 x serial - RS 232/422/485 - 9 pin D Sub (DB 9), 1 x network - Ethernet 10base T/100Base TX - RJ 45.Connectivity technology: Wired.Status indicators: Link activity, power, test mode.OS compatibility: Microsoft windows 98/ME/NT/2000/XP.RAM Installed ( Max ): 32 MB, Flash Memory Installed (Max): 8 MB.Operating temperature: 32 - 131 deg F, Humidity: 10 - 90%.Encryption algorithm: Triple DES, ARCFOUR, AES, SSL 3.0, Authentication method: Secure shell v.2 (SSH2).Co mmunication mode: Half duplex, full duplex, IEEE 802.3af (when PoE is populated), 128 bit encryption, DHCP support, BOOTP support, ARP support.Network protocols: TCP/IP, UDP/IP, ICMP/IP, Remote management protocol: SNMP 2, Telnet, HTTP.Includes: EDS4100 4 port device server with PoE, universal power supply and regional adapters, deviceInstaller configuration software, com port redirector software and related utilities.Certificate and standards: UL, TUV GS, VCCI, C Tick, cUL, EN 61000 3 2, IEC 61000 4 11, IEC 61000 4 2, IEC 61000 4 3, IEC 61000 4 4, IEC 61000 4 5, IEC 61000 4 6, IEC 61000 4 8, EN 61000 3 3, EN55024, EN55022 Class A, CISPR 22, FCC Part 15, RoHS.Weight: 1.90 lbs..Warranty: 2 years limited.Lantronix EDS Series PoE Device Server - Faster Ethernet Connection

The Brainboxes ES-457 2-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to two RS232 serial ports.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.85 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliant, RoHS and WEEE certifications & standards.Interface: Two RS232, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.48 oz..Comes with lifetime warranty

The Grandstream GWN7711P is a compact Layer 2 Lite managed switch designed for small-to-medium businesses seeking secure, scalable, and cloud-manageable networking. It features 8 Gigabit Ethernet ports, including 4 PoE ports with dynamic PoE/PoE+ power allocation. With support for VLAN, QoS, IGMP snooping, and storm control, it ensures optimized traffic flow and network protection. The GWN7711P is managed via embedded controller, GDMS, or GWN Manager, and supports desktop or wall-mount installation. Its robust feature set and compact design make it ideal for offices, hotels, and remote deployments..Offers 8 Gigabit Ethernet ports with Layer 2 Lite managed switching..Provides 4 PoE ports with dynamic PoE/PoE+ power allocation..Delivers 16Gbps switching capacity and 11.9Mpps forwarding rate..Designed for desktop or wall-mount installation in compact spaces..SNMP and LLDP enable remote monitoring and device discovery..Prioritizes traffic using QoS with DSCP, port, and 802.1p mapping..Enhances security with DHCP snooping, storm control, and loop prevention..Supports VLAN segmentation, voice VLAN, and IGMP snooping..Operates efficiently with 4MB buffer and 8K MAC address table..Certified with FCC, CE, RCM, and IC for global compliance.

Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 4 ports..Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network

EX2300 and EX2300-C Ethernet Switches deliver a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. Featuring a small, 1U footprint, the EX2300 and EX2300-C are ideal for access-layer deployments in micro branches, retail and workgroup environments, and converged network access in larger networks. The EX2300 offers 24 10/100/1000BASE-T ports in a single platform, while the EX2300-C offers 12 10/100/1000BASE-T ports. Both models are available with or without IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering attached network devices. Optional front panel 10GbE uplink ports support connections to higher-layer devices. Both models support Juniper's unique Virtual Chassis technology, enabling up to four of the switches to be interconnected and managed as a single device. Both models can also act as satellite devices in a Juniper Junos Fusion Enterprise deployment, which combines large numbers of access switches into a logical management platform..Features 12 networking ports to easily establish a local network or expand your existing one.Cascade to other network devices through the uplink port to expand your local area network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network

Simple plug-and-play, with more than enough to power the entire network. 24 high-power PoE+ ports with a large budget to keep your devices always-ready..24 x high-power PoE+ ports with a large budget to keep your devices always ready.Dimensions: 1.7"H x 15.4"W x 8.7"D.Comes in gray.Non-blocking switching architecture for maximum throughput at wire speed.300W total power budget to power wireless AP, IP cameras, IP phones, and much more.Unique PoE technology automatically balances the PoE power, delivering exactly what each device needs.Fanless design means zero added noise wherever it's located, making it perfect for your home or business environment.Designed to optimize power usage, lowering operational costs.Durable desktop case for longevity.Supports desktop or rack-mount placement and includes all mounting hardware in the box.Ensure interoperability with any standards-based PDs

The Tenda TEG1105P-4-63W is a compact, high-performance 5-port Gigabit Ethernet switch designed for small to medium-sized networks. It features four PoE (Power over Ethernet) ports that support IEEE 802.3af/at standards, delivering up to 30W of power per port for devices like IP cameras, wireless access points, and VoIP phones, making it an ideal choice for surveillance systems and smart home setups. The switch provides gigabit speeds across all ports, ensuring fast and reliable data transfer. With a switching capacity of 10 Gbps and a non-blocking architecture, the TEG1105P-4-63W can handle high network traffic without bottlenecks. Its plug-and-play, unmanaged nature makes it easy to deploy, while auto-MDI/MDIX ensures hassle-free connection to various network devices. The switch also supports jumbo frame sizes (up to 9 KB), enhancing network efficiency and performance for large data transfers. The Tenda TEG1105P-4-63W is built with robust surge protection, ensuring reliable operation even in environments with fluctuating power conditions. It is wall-mountable and designed for both home and office use, offering a straightforward, cost-effective solution for expanding your network with Power over Ethernet capabilities..The Tenda TEG1105P-4-63W features 5 Ethernet ports, including 4 Gigabit PoE ports and 1 uplink Gigabit port, offering Gigabit Ethernet performance and is an Unmanaged Switch..Supports Power over Ethernet (PoE), delivering up to 30W per port for powering devices like IP cameras, wireless access points, and VoIP phones..It supports a Data Transfer Rate of 1 Gbps (Gigabit Ethernet) across all its ports, ensuring high-speed data transmission for connected devices..The switch comes in a Desktop and Wall-Mountable form factor, offering flexibility for both home and office network setups..Wired switch designed for reliable Ethernet network connections..Offers 10 Gbps throughput with full-duplex mode and supports standard Ethernet operational modes. It also supports Jumbo Frames of up to 9 KB for better data handling..The Power Consumption of this switch is 63W, with energy-saving technology that automatically adjusts power usage based on load and idle conditions..Complies with IEEE 802.3af/at for PoE standards, as well as CE, FCC, and RoHS certifications for quality, environmental, and safety standards.

The SW-505-16P-R is a 16 port PoE+ rear-facing single-space rackmount 1Gb switch with 2RJ45/SFP 1Gb ports (aggregable up to 2Gbps) with a total PoE power budget of 185W. Each of the SFP ports can be used alone or aggregated together up to 4Gbps. This L2/L3 switch with 36Gbps switching capacity provides VLAN, QoS and other powerful management features. Up to 16 switches can be grouped in a single pane user-interface allowing easy and comprehensive administration. Variable speed fans for quiet operation. ProWatch compatible for support of remote monitoring and management. ACL ingress filtering. Watch Video: Meet our SW Series Managed PoE+ Switches.1Gb L2/L3 Managed Switch, US Power Cord.Dante and AES67 compatibility AV-over-IP compatible.Dimensions Height 1.75 in, Width 8.3 Length 17.4 in Product Weight 6.2 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface PoE Self-Healing with auto-recovery and power scheduling.Supports inbound (ingress) ACL filtering.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.802.1Q VLAN and QoS support including DCSP.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Designed for workgroups and departments, TP-Link JetStream L2/L2+ Managed Switch provides wirespeed performance and abundant L2 management features. It provides a variety of service features and multiple powerful functions with high security. The EIA-standardized framework and smart configuration capacity can provide flexible solutions for a variable scale of networks. ACL, 802.1x and Dynamic ARP Inspection provide robust security strategies. QoS and IGMP snooping/filtering optimize voice and video application. Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport of business critical data. SNMP, RMON, WEB and CLI Login bring abundant management policies. TP-Link JetStream L2/L2+ Managed Switch integrates multiple functions with excellent performance, and is friendly to manage, which can fully meet the need of the users demanding higher networking performance. TL-SX3206HPP/ TL-SG3210XHP-M2/ TL-SG3218XP-M2/ TL-SG3428MP/ TL-SG3428XMP/ TLSG3428XPP-M2/TL-SG3452P/TL-SG3452XP is also a Power Sourcing Equipment (PSE*). All the RJ45 ports* on the switch support Power over Ethernet (PoE*) function, which can automatically detect and supply power to those powered devices (PDs*) complying with IEEE 802.3af, IEEE 802.3at and/or IEEE 802.3bt. For TL-SG3218XP-M2, only port 1-8 supports the Power over Ethernet (PoE) function. PSE: a device (switch or hub for instance) that provides power through an Ethernet cable. PoE: This technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet. PD: a device powered by a PSE and thus consumes energy. Examples include powering network cameras, wireless LAN access points, IP telephones, network hubs, embedded computers etc. 2.5G PoE+ Ports for WiFi 6 : 8Ã- 2.5 Gbps ports smash the gigabit barrier and unlock the full potential of WiFi 6 APs. 10G Lightning-Fast Uplink: 2Ã- 10 Gbps SFP+ slots enable high-bandwidth connectivity and non-blocking switching capacity. 240 W PoE Budget : 8Ã- 802.3at/af-compliant PoE+ ports with a total power supply of 240 W * . Integrated into Omada SDN : Zero-Touch Provisioning (ZTP) ** , Centralized Cloud Management, and Intelligent Monitoring. Centralized Management : Cloud access and Omada app for ultra convenience and easy management. Static Routing : Helps route internal traffic for more efficient use of network resources. Robust Security Strategies : IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. Optimize Voice and Video Applications : L2/L3/L4 QoS and IGMP snooping. More from the Manufacturer.Quickly and easily set up a wired network with 8 networking ports.With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience.Rack mounting enables you to organize wires & secure cables for professional installation.Management capability allows maximum efficiency and with unrestricted control

Extend PoE+ power and Gigabit data another 100 m (328 ft.) without an external supply. Daisy‑chain extenders to reach longer distances, forwarding up to 30 W to IEEE 802.3af/at devices..Adds 100 m to a PoE+ link with Gigabit throughput..No additional power supply required (PoE‑powered)..Supports up to 30 W for cameras, APs, and phones..Cascade units to span large installations.

The D-Link® DGS-1210 series DGS-1210-52MP Gigabit web smart switch offers 48 10/100/1000BASE-T PoE ports with 4 Gigabit SFP ports for optical connections using multimode or singlemode SFP transceivers. It supports IPv6 management to ensure the safety of your network and incorporates Green 3.0 technology to save power. Auto surveillance VLAN feature consolidates data and surveillance video transmission through the network and protects the quality of realtime video. The switch ensures protection against traffic flooding caused by virus attacks with safeguard engine. The IEEE 802.3x flow control function allows servers to directly connect to the switch to ensure fast and reliable data transfer..Ethernet switch.Dimension: 17.32" x 8.27" x 1.73", 19" standard rack mounting width, 1U height, Weight: 5.69 lbs. (91 oz).Comes in black color.Total number of network ports: 52, number of total expansion slots: 4.Media type supported: optical fiber, twisted pair.Expansion slot type: SFP.Supports IEEE 802.1p quality of service and supports DSCP.Auto surveillance VLAN, cable diagnostics, LLDP/LLDP-MED, auto voice VLAN.Comes with lifetime limited warranty.Ethernet switch supports IEEE 802.1p quality of service and supports DSCP. Auto surveillance VLAN, cable diagnostics, LLDP/LLDP-MED, auto voice VLAN.

The SW-505-24P-R includes 24 1-Gigabit PoE+ Ethernet ports, two non-powered Ethernet ports, and two 1-Gigabit SFP expansion ports (SFP and non-powered ethernet ports cannot be used at the same time). Both 1 Gb SFP ports can be aggregated for a connection speed of up to 2 Gb. The 24 PoE+ ports deliver both gigabit data and power over a single cable to 802.11af/at compliant devices, with a maximum of 30W per port. For separately powered devices, these ports deliver network connectivity only. The total power budget is 250W for all PoE+ ports combined. The advanced Layer 2/Layer 3 features a refreshed easy-to-use management interface to simplify configuration and make this switch ideal for use in single-switch AVoIP environments. Setup of IGMP/Multicast on a per-port basis is easy, improving the setup and reliability of running audio and video over the network simultaneously. Watch Video: Meet our SW Series Managed PoE+ Switches.1Gb L2/L3 Managed Switch, US Power Cord.Dante and AES67 compatibility AV-over-IP compatible.Dimensions Height 1.75 in, Width 8.3 Length 17.4 in Product Weight 6.6 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface.Supports inbound (ingress) ACL filtering.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.52Gbps switching capacity.802.1Q VLAN and QoS support including DCSP.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Realize more possibilities with the TP-LINK JetStream 28-port gigabit smart switch with 24 PoE+ compliant ports. Omada's Software Defined Networking (SDN) platform integrates network devices, including access points, switches, and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network, all controlled from a single interface. Seamless wireless and wired connections are provided, perfect for use in hospitality, education, retail, offices, and more..Smart switch with 24 x gigabit PoE+ ports and 4 x gigabit SFP slots provides high-speed connections.Features 24 x 802.3at/af compliant PoE+ ports with a total power supply of 250W.Switching capacity: 56Gbps; packet forwarding rate: 41.7Mbps.Comes in a 19" 1U rack-mountable form factor.With QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply.Robust security strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.Max power consumption: 32.1W (no power device connected), 308.6W (with 250W power devices connected).Meets or exceeds the CE, FCC, RoHS standards.Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring.Centralized management: cloud access and the Omada app for enhanced convenience and easy management.Helps route internal traffic for more efficient use of network resources.IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery.System requirements: Microsoft Windows XP/Vista/7/8/10, macOS, NetWare, UNIX, or Linux.Package includes: switch, power cord, rack-mountable kit, rubber feet, and installation guide.Lifetime manufacturer limited warranty

Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty

The TP-LINK JetStream gigabit smart switch provides huge upgrade comparing with previous versions. The switch can be managed by Omada SDN Controller, which provides professional and reliable one-step solutions. Integrated L2 and L2+ features such as 802.1Q VLAN, QoS, IGMP snooping, and static routing provide cost-effective networking solutions for small- and medium-size businesses without sacrificing enhanced usability and strong performance..Gigabit smart switch featuring 8 x 10/100/1000Mbps RJ45 ports (ports 1-4 support 802.3at/af PoE+).PoE power budget: up to 62W.Features up to 16Gbps bandwidth.Designate the priority of traffic based on QoS, ensuring latency-sensitive applications that use voice and video remain clear and lag-free.Easy management with the Omada app that lets you configure settings, monitor the network status, and manage clients, all from the convenience of a smartphone or tablet.Max power consumption: 77.3W (with 62W power devices connected).Meets or exceeds the CE, FCC, RoHS standards.Use VLAN to achieve logical grouping management of devices in different physical LANs, improve information security, and reduce data congestion.ACL serves as a virtual admin, allowing all connected devices to obtain data in accordance with user-defined network rules and help you create the network regulations you need.Integrated into Omada SDN: zero-touch provisioning, centralized cloud management, and intelligent monitoring.Robust security strategies: IP-MAC-Port Binding, ACL, port security, DoS Defend, storm control, DHCP snooping, 802.1X, radius authentication, and more.Features a durable metal casing.Package includes: switch, power adapter, installation guide, rubber feet.Lifetime manufacturer limited warranty

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset. )The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Total Number of Ports: 2.Network (RJ-45): Yes.DVI: No

Ubiquiti UniFi Switch Pro 48 PoE is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution – it combines up to 600W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 40 Gigabit RJ45 802.3at PoE+ ports, four 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 15.73"D.Max. power consumption (excluding PoE output): 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Comes in silver.2-year manufacturer limited warranty

Use the SW-505-8P-F to provide 12 ports of network connectivity and PoE+ power in commercial or residential applications. This 12-port, fanless switch includes 8 Gigabit PoE+ Ethernet ports, 2 non-PoE Ethernet ports, and 2 Gigabit SFP expansion ports. Designed to support AV-over-IP (AVoIP) applications, the SW-505-8P-F includes eight 1-Gigabit PoE+ Ethernet ports, two non-PoE Ethernet Ports, and two 1-Gigabit SFP expansion ports. Both 1 Gb SFP ports can be aggregated for a connection speed of up to 2 Gb. The 8 PoE+ ports deliver both gigabit data and power over a single cable to 802.11af/at-compliant devices, with a maximum of 30W per port. For separately powered devices, these ports deliver network connectivity only. The total power budget is 130W for all PoE+ ports combined. The advanced Layer 2/Layer 3 features and easy-to-use management interface simplify configuration and make this switch ideal for use in single-switch AVoIP environments. Setup of IGMP/Multicast on a per-port basis is easy, improving the setup and reliability of running audio and video over the network simultaneously. This model also features a small form factor and fanless design that is perfect for conference rooms, offices, theaters, or wherever silent operation is needed..1Gb L2/L3 Managed Switch, US Power Cord.Dante and AES67 compatibility AV-over-IP compatible.Dimensions Height 1.75 in, Width 9.52 in Product Weight 5.5 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.130W total power budget

The Grandstream GWN7821P is a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large enterprises. It features 8 x 2.5 Gigabit Ethernet ports and 2 SFP+ uplink ports, delivering scalable and secure connectivity. With dynamic PoE/PoE+/PoE++ support, advanced QoS, and ACL-based security policies, it ensures reliable traffic prioritization and flexible access control. The switch supports IPv4/IPv6 networks and offers fault detection, dual boot, and link aggregation for enhanced resilience. Managed via GDMS, CLI, or GWN Manager, the GWN7821P simplifies network deployment and supports stacking for unified control..Features 8 multi-gigabit Ethernet ports with Layer 3 managed switching capabilities..Supports PoE, PoE+, and PoE++ with smart power control across connected devices..Enables 2.5Gbps data throughput for high-speed enterprise networking..Built in a rack-mountable form factor with desktop and wall-mount options..SNMP support allows remote monitoring and network diagnostics..Prioritizes traffic using built-in QoS and multiple scheduling methods..Secures access with ACL filtering, storm control, and dual system redundancy..Operates in full-duplex mode with support for stacking and link aggregation..Consumes power efficiently with dynamic PoE allocation and internal supply..Complies with FCC, CE, RCM, and IC certifications for global deployment.

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The Netgear 300 Series Gigabit Ethernet unmanaged switch with PoE provides easy, reliable, and affordable network connectivity for home and small offices. With this unmanaged plug-and-play switch, you can expand your network connections to multiple devices instantly. The SOHO gigabit PoE unmanaged switch supports Netgear's FlexPoE exclusive upgradeable PoE feature. Powered by the flexible integrated PoE+ technology, you can increase or decrease the PoE budget by simply purchasing a new Netgear FlexPoE power supply, effectively future-proofing small business networks and budgets. This unmanaged switch contains eight PoE+ ports with 83W total power budget, and includes Netgear FlexPoE, making it expandable to 123W (with separately purchased power supply module)..Unmanaged switch with eight ports provides gigabit Ethernet connectivity to your devices.Provides a total power budget of 83W (up to 30W per port) to power wireless access points, IP cameras, IP phones, and much more; upgradable to 123W PoE+ budget with an additional power supply module.Install your switch on your desktop, or mount it to the wall (wall mount kit included).Quality of Service (QoS) for traffic prioritization.Non-blocking switching architecture for maximum throughput at wire speed.Energy-efficient technology for power savings.Meets or exceed the CE Mark, FCC Part 15 Class A, IC Class B, RCM, VCCI, CB, and CE LVD standards.Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Fanless design for silent operation.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Plug-and-play, no setup required.Durable and rugged metal case for long-lasting use.Great for small office and home networks.Dimensions: 1.1"H x 6.2"W x 4"D.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Box contains: unmanaged PoE Gigabit Ethernet switch, power adapter/cord (localized to the North America region), rubber foot pads for desktop installation, wall mount kit, installation guide.3-year manufacturer limited warranty

The StarTech POEINJ4G black PoE+ injector helps to deliver power and data to four power over Ethernet devices using this wall-mountable PoE+ midspan hub. It supports 10/100/1000 Mbps networks/devices as well as auto-negotiation and auto-MDIX. Features flexible setup and comes with a desktop-sized or wall-mountable metal housing for durability. PoE+ injector automatically detects the powered device to offer the appropriate level of power output..PoE injector is perfect for powering a Wireless Access Point (WAP) in a business environment.Dimensions: 3.7"H x 2.8" W x 1"D.Compatible with IP cameras, IP phones and wireless access points.Comes in black color.Easily connect, power, and operate up to four gigabit PoE-powered devices (PD).Delivers full power to each port - up to 30.8 W (802.3at) or 15.4 W (802.3af) to each connected device.Flexible setup, with a desktop-sized, or wall mountable metal housing for user convenience.Plug and-play setup for reliable operation.Automatically detects the powered device to provide the appropriate level of power output.Circuit protection prevents power interference between each port.Support for 10/100/1000 Mbps networks and devices, as well as Auto-Negotiation and auto MDIX.Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection is not available.Has 8 - RJ-45 female connectors, 4 ports and 1 power/4 PoE in-use LED indicators.Power supply: 100 -240VAC (input), 52VDC (output ), Current: 2-1A (input), 2.31A (output), Power consumption: 120W max, Power output: 52VDC at 30.8W.Temperature: -10 - 70 deg C (storage), 0 - 50 deg C (operating), Humidity: 5 - 95% RH (non-condensing).Includes 1 x 4-port gigabit PoE+ Injector, 1 x universal power adapter, 3 x power cords (NA/UK/EU), instruction manual.Meets RoHS compliant, FC, CE certification and standards.Weight: 7.2 oz.Comes with 2 years warranty.The StarTech black PoE+ injector is suitable for almost all PoE device classes, including wireless access points, as well as IP phones and cameras.

All PoE ports fully support PoE/PoE+ and feature Dynamic PoE capability that intelligently optimizes power distribution by detecting each device's actual requirements and allocating resources as necessary over time, rather than solely based on PoE class reported. Unlike standard PoE that reserves maximum power based only on PoE class reported per port regardless of usage, Dynamic PoE efficiently reallocates unneeded power back to the switch to power up more devices with the same PoE budget. This makes these switches ideal for deploying a wide range of devices like Wireless Access Points, Pan/Tilt/Zoom and fixed IP cameras, VoIP phones, security door locks, and virtually any IoT PoE-powered device, while redistributing power where it's needed and maximizing your network's capacity without wasting energy..POWER-OVER-ETHERNET: 4 PoE+ ports delivering up to 30W per port with a 63W total power budget for wireless APs, IP Cameras, IP Phones and much more..PLUG-AND-PLAY: Simple set up with no software to install or configuration needed.NON-BLOCKING SWITCHING: Non-blocking switching architecture for maximum throughput at wire speed.FANLESS DESIGN: Silent operation makes this switch perfect for noise-sensitive environments.VERSITILE MOUNTING OPTIONS: Install your switch on your desktop or mount it to your wall with the hardware provided in the box.ENERGY EFFICIENT: Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active port or when there is no link or no activity detected Flex PoE.Featuring the industry's first flexible PoE+ integrated technology, you can easily scale your power capabilities by simply upgrading the power supply—effectively future proofing both your small business network and budget.

This TP-LINK JetStream enterprise switch with 8 x gigabit PoE+ ports and 2 x gigabit SFP slots provides non-blocking switching performance and ultralow latency, so reliable and lightning-fast connections to server and other switches are easily built. Security features include IP-MAC-Port-VID binding, port security, storm control, and DHCP snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the access control lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users' network access can be controlled via 802.1x authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided..8 x gigabit (RJ45) ports of this managed switch offer high-speed and reliable connections to other switches and devices.Contains 8 x 802.3at/af compliant PoE+ ports with a total power supply of 150W.Provides up to 20Gbps of switching capacity.Rack-mountable and features a fanless design.Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more; with QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply.Cloud access and the Omada app for enhanced convenience and easy management.Maximum power consumption: 23.6W (110V/60Hz).8 x Gigabit PoE+ ports and 2 x Gigabit SFP slots provide high-speed connections.Helps route internal traffic for more efficient use of network resources.Features robust security strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.Stand-alone management: web, CLI (console port, Telnet, SSH), SNMP, RMON, and dual image bring powerful management capabilities.sFlow, QinQ, L2PT PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind.802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links.IPv6 functions such as dual IPv4/IPv6 stack, MLD snooping, IPv6 ACL, DHCPv6 snooping, IPv6 interface, path maximum transmission unit (PMTU) discovery, and IPv6 neighbor discovery guarantee your network is ready for the next-generation network (NGN) without upgrading your hardware.Lifetime manufacturer limited warranty

Introducing the NETGEAR GS116LP 16-Port Gigabit Ethernet Unmanaged Switch with 76W PoE budget. The Industry's first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116LP the ideal cost-effective and future-proof solution for any home or business environment..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 76W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

Introducing the NETGEAR GS116LP 16-Port Gigabit Ethernet Unmanaged Switch with 76W PoE budget. The Industry's first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116LP the ideal cost-effective and future-proof solution for any home or business environment..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 76W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

Featuring 24 PoE+ (802.3af/at compliant) ports, the TP-LINK JetStream switch supports a total PoE power budget up to 384W. Designed to use a single Ethernet cable for both data and power transmission, the switch offers flexible deployment for PoE-supported devices, such as wireless access points, IP cameras, and IP phones, lowering infrastructure costs for small businesses. Omada's software-defined networking (SDN) platform integrates network devices, including access points, switches and routers, providing 100% centralized cloud management. Omada creates a highly scalable network, all controlled from a single interface. The switch provides seamless wireless and wired connections, making it great for use in hospitality, education, retail, offices, and more..Convenient managed gigabit switch with 24-port PoE+ for a complete Omada network.24 x 802.3af/at compliant gigabit PoE+ ports and 4 x gigabit SFP slots provide high-speed connections.Switching capacity: 56Gbps; packet forwarding rate: 41.66Mbps.Comes in a 1U rack-mountable form factor.SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and to send traps on abnormal events.With QoS (quality of service), voice and video services remain smooth, even when bandwidth is in short supply.Security features include IP-MAC-Port-VID binding, port security, storm control, and DHCP snooping to defend against a range of network threats.Maximum power consumption: 465.8W.Meets or exceeds the CE, FCC, and RoHS standards.Integrated list of common DoS attacks is available, making it easier than ever to prevent them.Users' network access can be controlled via 802.1X authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided.QinQ, L2PT, PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind.802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links.Easy to manage via an intuitive web-based graphical user interface (GUI) or an industry-standard command-line interface (CLI).System requirements: Microsoft Windows 98SE/NT/2000/XP/Vista/7/8/10/11, macOS, NetWare, UNIX, or Linux.Package contents: switch, power cord, rack mounting kit, rubber feet, quick installation guide.Lifetime manufacturer limited warranty

Industrial 5 Port Gigabit PoE Switch - 30W - Power Over Ethernet Switch - Hardened GbE PoE+ Unmanaged Switch - Rugged High Power Gigabit Network Switch IP-30/-40 C to 75 C (IESC1G50UP).FLEXIBLE POWER INPUT: Power over Ethernet network switch can be hardwired using terminal block (48-56VDC) power or powered using a standard (48-56VDC) Type-N barrel wall adapter (not included).POWER OVER ETHERNET: Gigabit PoE Switch provides up to 30W of PSE power per PoE port to IEEE 802.3af (PoE) & IEEE 802.3at (PoE+) | Use with devices like cameras & access points using Cat 5e/6.ROBUST DESIGN: Industrial Network Switch w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged industrial IP-30 aluminum housing | -40C to 75C hardened operating temp | DIN/Wall Mount.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This Gigabit PoE switch is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 5 Port GbE Switch | 4 PoE ports | IEEE 802.3af / IEEE 802.3at | 10/100/1000 Mbps | Unmanaged | Redundant Power Input | Terminal Block Power | Total power budget: 120W.Rugged PoE Switch | 30 Watts | IP-30 Aluminum Housing | Unmanaged | 5 Port

Introducing the NETGEAR GS116PP 16-Port Gigabit Ethernet Unmanaged Switch with 183W PoE budget . The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116PP the ideal cost-effective and future-proof solution for any home or business environment. A unique combination of features from Netgear makes this switch one of the most adaptive on the market..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 183W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.NETGEAR GS116PP is the industry’s first flexible PoE+ 16-Port Gigabit with a compact and fanless design.

The Grandstream GCC6010W is a compact, all-in-one networking and unified communications solution with integrated Wi-Fi 6. It merges a 3Gbps VPN router, next-gen firewall, IP PBX, and managed switch into one device, featuring 5 Gigabit ports and dual-band wireless with MU-MIMO. Designed for small to medium businesses, it offers secure remote access, advanced traffic control, and centralized management via GDMS or local interface. With robust security, DPI, IDS/IPS, and encrypted VPN support, the GCC6010W delivers high-performance connectivity in a sleek white mini-tower form..Combines 5 Ethernet ports with managed switching, IP PBX, firewall, and VPN routing..Delivers dual-band Wi-Fi 6 with 2x2 and 3x3 MU-MIMO for fast and stable wireless access..Supports 3Gbps router throughput and 1Gbps IPsec VPN for secure remote connectivity..Features a white plastic mini-tower design ideal for desktop environments..Wireless connectivity includes 802.11 a/b/g/n/ac/ax with up to 3603 Mbps on 5GHz..Enables SNMP v1/v2c/v3 for remote network monitoring and management..Prioritizes VoIP and app traffic with VLAN, DSCP, and protocol-based QoS..Protects networks with DPI, SSL proxy, IDS/IPS, and content filtering tools..Handles up to 160K NAT sessions and supports 12 PBX users by default..Operates on 18W power with efficient design and universal adapter..Complies with FCC, CE, RCM, and IC certifications for global use.

The Transition Networks® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.

The TP-LINK dedicated 16-port PoE+ switch is perfect for numerous applications. Compliance with the 802.3af/at PoE+ standard supports up to 30W on each PoE port. The total 250W PoE power budget for the 16 x gigabit PoE+ ports makes it suitable for a wide range of applications, from surveillance to networking in offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more..Unmanaged Ethernet switch featuring 16 x Gigabit PoE+ (RJ45), 2 x Gigabit non-PoE (RJ45) ports, and 2 x combo gigabit SFP slots.High PoE power budget with up to 30W for each PoE port and 250W for all PoE ports.Switching capacity: 36Gbps; packet forwarding rate 26.78Mpps.Comes in a 19" 1U rack-mountable form factor.Ensures smooth traffic for latency-sensitive applications that use voice and video by designating the priority of traffic based on quality of service (QoS).Max power consumption: 21.4W (no power device connected), 286.6W (with 250W power devices connected).Meets or exceeds the CE, FCC, RoHS standards.Intelligent power management automatically cuts lower-priority ports power to ensure high-priority ports power supply.Automatically detects the required PoE power for your device and protects your non-PoE equipment from being damaged.Fully compatible with PoE devices, such as IP cameras, access points, and IP phones.Plug-and-play with no configuration and installation needed.Durable metal casing and professional heat dissipation design ensure a wide operating temperature range.Package includes: switch, installation guide, power cord, rack mount kit, rubber feet.Lifetime manufacturer limited warranty

TL-SG1210P complies with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 63 W PoE power budget* for the 8× PoE ports makes it has wide range of applications, such as surveillance, offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and etc..Number of Ethernet Ports 8, Network Management Type Unmanaged.Network Technology: 1000Base-T, 1000Base-X.Ethernet Technology: Gigabit Ethernet.Switch Form Factor: Desktop, Wall Mountable.Wireless Connectivity: Not Applicable.Power Source: AC Adapter.Media Type Supported: Twisted Pair, Optical Fiber.3 Year Warranty

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The Grandstream GCC6011 is a robust all-in-one networking and unified communications solution designed for high-demand business environments. It integrates a 2.5Gbps VPN router, next-gen firewall, IP PBX, and managed switch into a single metal-encased unit. With 10 Gigabit Ethernet ports, 2x 2.5Gbps SFP ports, and 4 PoE outputs, it delivers secure, high-speed connectivity and centralized control. Advanced features include DPI, IDS/IPS, encrypted VPN protocols, and VoIP prioritization. Ideal for desktop, wall, or rack-mount setups, the GCC6011 is managed via GDMS, mobile app, or local interface and supports up to 500 clients and 150 APs..Integrates 10 Ethernet ports with managed switching, IP PBX, firewall, and VPN routing..Provides 4 PoE output ports with IEEE802.3af/at support and 36W total power budget..Delivers 2.5Gbps router throughput and 1Gbps IPsec VPN for secure remote access..Built with a durable metal housing for desktop, wall, or rack-mount installation..SNMP v1/v2c/v3 enables remote monitoring and device management..Secures networks with DPI, SSL proxy, IDS/IPS, and content filtering tools..Handles up to 160K NAT sessions and supports 12 PBX users by default..Operates on 48W power with efficient design and universal adapter..Certified for FCC, CE, RCM, and IC compliance.

The Lantronix SM48TAT4XA-RP is a versatile Gigabit Ethernet switch designed to meet a range of networking needs. With 48 ports supporting 10/100/1000 (PoE+) and two 10Gb Ethernet SFP+ ports, it offers extensive connectivity options. This switch features a multitude of management protocols including SNMP, Telnet, and CLI for efficient remote management, making it suitable for complex environments. The PoE capabilities, with a budget of 1640 W and support for PoE+, allow for seamless integration with devices such as access points and IP cameras. Built to perform in a wide range of conditions, the SM48TAT4XA-RP operates between 0°C and 50°C with a humidity range of 5 - 90%. Compliance with various standards such as IEEE 802.3 and UL ensures reliable operation and safety. With advanced features including IGMP snooping, VLAN management, and port security, network stability and data integrity are prioritized, making it an option for organizations looking to enhance their network infrastructure..This switch offers 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, delivering enterprise-grade performance with full Layer 2 and Layer 3 management capabilities for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a total PoE budget of up to 820W, making it ideal for powering IP cameras, wireless access points, and VoIP phones.The switch provides Gigabit Ethernet connectivity on all 48 ports and 10 Gigabit uplinks via SFP+ slots, ensuring high-speed data transfer for demanding applications.Features a compact 1RU rack-mountable design, suitable for space-constrained network environments.Supports SNMP v1, v2c, and v3 for secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, ensuring optimized traffic flow for voice, video, and data.Offers comprehensive management options such as Web GUI, CLI, Telnet, and SSH, along with security features like RADIUS, TACACS+, SSL, and port-based MAC security.Delivers a switching capacity of 176Gbps and supports operational modes including static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for sustainable and safe operation.5 Years Manufacturer's Warranty

The Grandstream GCC6010 is a powerful all-in-one networking and unified communications solution designed for small to medium businesses. It combines a VPN router, next-gen firewall, IP PBX, and managed network switch into one compact device. With 5 Gigabit Ethernet ports, 2x 2.5Gbps SFP ports, and 4 PoE outputs, it supports high-speed connectivity and secure remote access. Advanced features include DPI, IDS/IPS, encrypted VPN protocols, and VoIP prioritization. Managed via GDMS, mobile app, or local interface, the GCC6010 simplifies deployment and ensures reliable performance across voice, video, and data networks..Integrates 5 Ethernet ports with enterprise-grade managed switching and unified communications..Provides 4 PoE output ports with IEEE802.3af/at support and 36W total power budget.Achieves up to 2.5Gbps router throughput for fast and secure VPN access..Compact metal housing supports desktop and wall-mount installation..SNMP v1/v2c/v3 enables remote monitoring and device management..Prioritizes VoIP and app traffic using VLAN, DSCP, and protocol-based QoS..Secures networks with DPI, SSL proxy, IDS/IPS, and content filtering tools..Operates with 160K NAT sessions and supports up to 12 PBX users by default..Consumes up to 36W with energy-efficient PoE and universal power adapter..Certified for FCC, CE, RCM, IC, and UKCA compliance.

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The TRENDnet TI-PG541I DIN-Rail mountable Ethernet switch has metal enclosure. It has 4 x Gigabit PoE+ 802.3at ports, 1 x Gigabit port and 1 x Gigabit SFP slot. This switch operates at a power rating of 130 W and features a switching capacity of 12 Gbps. It can withstand a high degree of vibration, shock and provides protection against ESD/EMI/surge. It operates within a wide temperature range for harsh environments. It includes LED indicators that show power, redundant power, alarm, SFP, PoE and network port status. It supports 1000Base-T and 1000Base-X network technologies for high performance..Gigabit Ethernet managed switch is ideal for deployment both at the core & the network edge to provide full gigabit speeds throughout the network.5 x gigabit Ethernet network, 1 x SFP.Management: CLI, HTTP web based GUI, SNMP v1, v2c, SNMP trap, RMON groups 1, 2, 3, 9, SNTP, SMTP alert, port mirror, storm control, traffic monitor.Data transfer rate: 10 Mbps (half-duplex), 20 Mbps (full-duplex) Ethernet, 100 Mbps (half-duplex), 200 Mbps fast Ethernet, 2000 Mbps gigabit Ethernet.Dimensions: 5.2"H x 5.3"W x 4.7"D.Power consumption: 10 W (max), 130 W (max.) with PoE+ fully loaded.Meets CE, FCC, Shock (IEC 60068-2-27), Freefall (IEC 60068-2-32), Vibration (IEC 60068-2-6) standards.Form factor: Rail-mountable.RAM buffer: 128MB.Network standards: IEEE 802.1p/802.1Q/802.3x/802.3z/802.3ab/802.3af/802.3at/802.3az.Media type supported: Optical fiber, twisted pair, network technology: 1000Base-T, 1000Base-X.Layer supported: 3.MAC address table: 8K entries, jumbo frames: 10 KB, MTBF: 180136 hours at 65 deg C, 435905 hours at 25 deg C.Includes: TI-PG541i, quick installation guide, CD-ROM (users guide).CLI and web based management, full power PoE+, wide operating temperature range, surge/ESD protection, dual redundant power inputs.Weight: 1.17 lbs..Comes with limited lifetime warranty

The 8-Port Gigabit PoE+ Switch, model TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE and PoE+ devices with a 61W PoE budget. Plug and Play this sturdy metal switch for reliable high-speed PoE networking..Type of Ethernet Switch, Ethernet type & Usage: 8-Port Gigabit PoE+ Switch.No. & Type of Ports (including expansion slots): 8 x Gigabit PoE/PoE+ ports; LED indicators.Dimensions: 5.9 x 3.7 x 1.2 in..Power Consumption: Input: 110-240V AC, 50/60 Hz 1.2A; Output: 54 V DC, 1.67 A; Consumption: 36 Watts (Max.).Certifications: CE;FCC.A 61W PoE power budget supports up to eight Power over Ethernet devices..Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations..Warranty: Lifetime Warranty.Operating Humidity: ax. 90% non-condensing.With a compact and lightweight housing design, this switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation..16Gbps switching capacity.LED indicators convey port status.TPE-TG82G 8-Port Gigabit PoE+ Unmanaged Switch from TRENDnet

The Lantronix Transition Networks SM24TAT4XB-EU is a high-performance managed Gigabit Ethernet PoE+ switch designed to meet the demands of enterprise and smart infrastructure environments. Featuring 24 Gigabit RJ-45 ports and 4 dual-speed 1G/10G SFP+ uplink slots, this switch delivers lightning-fast connectivity and exceptional scalability for growing networks. With a 128Gbps switching capacity, it ensures smooth data flow even under heavy loads, making it ideal for IP surveillance, VoIP, and high-bandwidth applications. This switch supports IEEE 802.3at PoE+ and 802.3af PoE, providing up to 370W PoE budget to power cameras, access points, and other devices without additional adapters. Advanced Layer 3 features, VLAN support, QoS, and robust security protocols (SSH/SSL, RADIUS, TACACS+) guarantee secure and efficient network management. The integrated Device Management System (DMS) offers intuitive graphical monitoring, traffic analysis, and troubleshooting tools for simplified administration. Built for reliability, the SM24TAT4XB-EU operates within a wide temperature range and complies with UL, CE, and IEC62368 safety standards. Backed by a 5-Year warranty, this switch is the perfect solution for businesses seeking performance, flexibility, and long-term value..This managed Layer 3 switch features 24 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ slots, delivering enterprise-grade performance with advanced management capabilities via Web GUI, CLI, Telnet, and SNMP v1/v2c/v3.Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ standards with a PoE budget of up to 370W, ensuring reliable power delivery for IP cameras, VoIP phones, and wireless access points.Offers a 128Gbps switching capacity for high-speed data transfer and efficient network performance.Designed in a rack-mountable 1U form factor.Supports SNMP v1/v2c/v3 for comprehensive network monitoring and management, along with LLDP for device discovery.Provides advanced Quality of Service (QoS) with 8 hardware queues, strict priority, and weighted round-robin scheduling for optimized traffic handling.Features robust security including RADIUS, IEEE 802.1X authentication, TACACS+, SSH/SSL encryption, and ACLs for granular access control.Supports IPv4/IPv6 Layer 3 static routing, link aggregation (LACP), VLAN tagging, IGMP snooping, and spanning tree protocols for flexible network configurations.Consumes 44W maximum without PoE and up to 450W at full PoE load, with IEEE 802.3az Energy-Efficient Ethernet for reduced power usage.Complies with UL, CE, FCC Class A, and environmental standards including RoHS, REACH, and WEEE, ensuring safety and sustainability.5 Years Manufacturer's Warranty