ProFlex Gloves

7251 1-pair S Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7022 2XL Lime ANSI A2 Coated CR Gloves DSX.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – DSX nitrile coated palms for optimal grip and dexterity with dry surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant

ProFlex® Performance Thermal Waterproof Utility Gloves: Dual-zone insulation, waterproof insert and Tena-Grip™ palm; keep hands warm and dry..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) 3M Thinsulate for extreme hand protection in cold conditions..WATERPROOF/WINDPROOF & BREATHABLE – Breathable membrane insert creates a barrier which blocks cold, moisture and wind to keep hands warm and dry when working in snow and cold temperatures.WEATHER-RESISTANT – Durable ripstop outer shell with DWR breathable water-repellent finish.SUPERIOR GRIP – Reinforced palm and fingertip reinforcements for superior grip, abrasion resistance and flexibility, even in the cold.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smart phones and tablets with thumb and index finger without having to take the gloves off.HIGH VISIBILITY – Available in hi-vis materials and reflective accents to enhance wearer visibility and hand signaling.SOFT THUMB AREA– For wiping nose/brow.EASY ON/OFF  – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.TESTED – Meets EN 388: 3423 X standard.Machine Washable

7251 1-pair XL Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7001 2XL Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS  – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE

HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

7025 XL Blue ANSI A2 PU Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP – PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with PU coating is lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A2 cut resistant, EN388: 2X42B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: 2XL (11).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

ProFlex® Performance Thermal Waterproof Utility Gloves: Dual-zone insulation, waterproof insert and Tena-Grip™ palm; keep hands warm and dry..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) 3M Thinsulate for extreme hand protection in cold conditions..WATERPROOF/WINDPROOF & BREATHABLE – Breathable membrane insert creates a barrier which blocks cold, moisture and wind to keep hands warm and dry when working in snow and cold temperatures.WEATHER-RESISTANT – Durable ripstop outer shell with DWR breathable water-repellent finish.SUPERIOR GRIP – Reinforced palm and fingertip reinforcements for superior grip, abrasion resistance and flexibility, even in the cold.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smart phones and tablets with thumb and index finger without having to take the gloves off.HIGH VISIBILITY – Available in hi-vis materials and reflective accents to enhance wearer visibility and hand signaling.SOFT THUMB AREA– For wiping nose/brow.EASY ON/OFF  – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.TESTED – Meets EN 388: 3423 X standard.Machine Washable

7021 S Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: S (7).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

7021 XL Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

QuickCuff Utility Gloves: All-purpose protection; easy on/off..Durable synthetic leather palm.Reinforced thumb saddle wear area.Breathable poly mesh construction.QuickCuff elastic gauntlet fit with ID space.Pull-on tab for easy on/off.EN 388: 2121.Size: Small

7025 L Blue ANSI A2 PU Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP – PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with PU coating is lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A2 cut resistant, EN388: 2X42B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

7042 M Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

7061 1-pair S Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

ProFlex® Performance Thermal Waterproof Utility Gloves: Dual-zone insulation, waterproof insert and Tena-Grip™ palm; keep hands warm and dry..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) 3M Thinsulate for extreme hand protection in cold conditions..WATERPROOF/WINDPROOF & BREATHABLE – Breathable membrane insert creates a barrier which blocks cold, moisture and wind to keep hands warm and dry when working in snow and cold temperatures.WEATHER-RESISTANT – Durable ripstop outer shell with DWR breathable water-repellent finish.SUPERIOR GRIP – Reinforced palm and fingertip reinforcements for superior grip, abrasion resistance and flexibility, even in the cold.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smart phones and tablets with thumb and index finger without having to take the gloves off.HIGH VISIBILITY – Available in hi-vis materials and reflective accents to enhance wearer visibility and hand signaling.SOFT THUMB AREA– For wiping nose/brow.EASY ON/OFF  – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.TESTED – Meets EN 388: 3423 X standard.Machine Washable

7041 L Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

7025 2XL Blue ANSI A2 PU Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP – PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with PU coating is lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A2 cut resistant, EN388: 2X42B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

7061 1-pair M Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7042 2XL Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

7251 1-pair L Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: XL (10).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

7041 M Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide an excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for perfect dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI Level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a fit like no other. The DSX nitrile dip technology outperforms all nitrile-based dips in dry environments. This multi-layer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians. Great for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians; great for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend; come in black.Size: L (9).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touch-screen capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable

7022 XL Lime ANSI A2 Coated CR Gloves DSX.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – DSX nitrile coated palms for optimal grip and dexterity with dry surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant

7061 1-pair 2XL Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7025 M Blue ANSI A2 PU Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP – PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with PU coating is lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A2 cut resistant, EN388: 2X42B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

ProFlex® Reinforced Thermal Utility Gloves: Dual-zone insulation and reinforced palm; built to battle the elements..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WEATHER-RESISTANT – Durable ripstop outer shell with DWR breathable water-repellent finish.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF  – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable

HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: 2XL (11).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

7061 1-pair XL Blue CR Gloves - PU Coated 21g.CUT RESISTANT - ANSI/ISEA 105-2016 level A6 cut protection and level 3 abrasion resistance for protection when working with sharp materials.FLEXIBLE NO-SLIP GRIP - PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.TESTED - Meets EN388 3X42E and ANSI/ISEA 105-2016 level A6 cut resistant, level 3 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

7021 L Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: XL (10).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: M (8).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: S (7).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: M (8).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable

7042 2XL Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

ProFlex® Reinforced Thermal Waterproof Utility Gloves: Dual-zone insulation, waterproof insert and reinforced palm; keep hands warm and dry..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WATERPROOF + WINDPROOF – A weather-resistant ripstop outer shell, DWR water-repellent finish and a breathable insert block cold, moisture and wind to keep hands warm and dry.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF  – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable

7251 1-pair M Black CR Gloves - Fully Coated Nitrile.CUT RESISTANT - ANSI/ISEA 105-2016 level A5 cut protection and level 4 abrasion resistance for protection when working with sharp materials.IMPROVED GRIP - Dual-layer coating of smooth nitrile layer + anti-slip nitrile layer for ultimate water wicking grip performance.HIGH PROTECTION, HIGH COMFORT - 21-gauge seamless tungsten knit delivers a combination of high cut protection while remaining comfortably lightweight and flexible for maximum dexterity.OIL-/WATER-RESISTANT - Fully coated nitrile dip stops water and oil from touching the hand.TESTED - Meets EN388 4X42D and ANSI/ISEA 105-2016 level A5 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards.ENHANCED DURABILITY - Reinforced thumb saddles provide extra strength in high-wear areas.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.MACHINE WASHABLE.⚠ WARNING:California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

ProFlex® Reinforced Thermal Waterproof Utility Gloves: Dual-zone insulation, waterproof insert and reinforced palm; keep hands warm and dry..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WATERPROOF + WINDPROOF – A weather-resistant ripstop outer shell, DWR water-repellent finish and a breathable insert block cold, moisture and wind to keep hands warm and dry.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF  – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable

7022 L Lime ANSI A2 Coated CR Gloves DSX.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – DSX nitrile coated palms for optimal grip and dexterity with dry surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for harsh work environments. These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear. The DSX nitrile dip technology provides an unbeatable grip in dry environments. This special grip technology is abrasion-resistant and outperforms all nitrile-based dips in dry environments. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides Level 2 cut protection with dexterity and comfort. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers; come in high-visibility lime color.Size: L (9).12 pairs of gloves per pack.18-gauge yarn provides Level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

ProFlex® Reinforced Thermal Waterproof Utility Gloves: Dual-zone insulation, waterproof insert and reinforced palm; keep hands warm and dry..THERMAL PROTECTION – Dual-zone insulated with 40 grams (palm) and 70 grams (back of hand) of 3M Thinsulate for extreme hand protection in cold conditions..WATERPROOF + WINDPROOF – A weather-resistant ripstop outer shell, DWR water-repellent finish and a breathable insert block cold, moisture and wind to keep hands warm and dry.DURABLE MATERIALS – Rugged palm and fingertip reinforcements are designed for superior grip, abrasion resistance and flexibility when handling things in chilly temps.DEXTERITY – Insulation is lightweight and free of bulk maintaining full dexterity.TOUCHSCREEN CAPABLE – Swipe, tap, and type on smartphones and tablets with thumb and index finger without having to take the gloves off.EASY ON/OFF  – Extended neoprene cuff with ID space can fit under or over jacket sleeves, tighten with hook and loop closure.SOFT THUMB AREA – For wiping nose/brow.TESTED – Meets EN 388: 3423 X standard.REFLECTIVE ACCENTS – Enhances wearer visibility and hand signaling.Machine Washable

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: M (8).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

7001 M Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS  – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE