RS232 Serial Converters

Convert async RS232 to RS422/485 at speeds up to 19.2 kbps with distances up to 4000 ft over CATx cables. These devices are great for connecting RS232 devices into an existing RS422/485 environment in factory automation, building automation, and process automation. They can be mounted using DIN Rail and can withstand operating temperatures of -40 to 176 degrees F (-40 to 80 C)..Optically isolates and converts unbalanced half- or full-duplex RS-232 signals to optically isolated and balanced full-duplex RS-422 or 2-wire half- or 4-wire full-duplex RS-485..Powered by 10-30 VDC, 100 mA.2-wire half-duplex or 4-wire full-duplex, RS-422 Full-duplex.Async (data leads) only..Withstands operating temperatures of -40 to 176 degrees F (-40 to 80 C).

Tripp Lite Null Modem Serial RS232 Cable DB9 to DB25, null modem cable, 6 ft.Type: Null modem cable.Technology: Shielded.Cable Features: Molded , gold plated connectors.Length: 6 ft.Connectors: 1 x 9 pin D-Sub (DB-9) - female.Connectors (Other Side): 1 x 25 pin D-Sub (DB-25) - male.Manufacturer Warranty: Limited lifetime warranty.Tripp Lite 6' Null modem gold cable uses copper conducting material to resist corrosion and allows you to connect 2 serial devices that require cross-wired configuration.

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

This versatile adapter converts an available USB 1.1 or 2.0 port into an RS232 serial DB9 port, allowing you to connect, monitor, and control your serial devices with ease. Featuring the industry-leading FTDI chipset, this adapter ensures superior compatibility and advanced features that set it apart from other solutions. One of the standout features of this adapter is its COM retention capability. The FTDI chipset automatically reassigns the same COM port value if the cable is disconnected and reconnected or if the system is rebooted, ensuring consistent and reliable performance without the need for manual configuration. This functionality makes it an ideal choice for various applications, from industrial automation to point-of-sale systems. Designed for maximum compatibility, the Rocstor Premium FTDI USB to Serial RS232 Adapter Cable works seamlessly with Windows, Mac OS, and Linux operating systems. Its single-cable design enhances portability, and being USB-powered, it eliminates the need for an external power adapter..The Rocstor Premium FTDI USB to Serial RS232 Adapter Cable is designed for data transfer, making it ideal for use with computers and serial devices..This cable is available in lengths of 3 feet (1 meter) and 6 feet (1.8 meters), providing flexibility for various installation needs..It features a 9-pin DB-9 RS-232 Serial male connector on one end and a USB 2.0 Type A male connector on the other, ensuring a secure and stable connection..Constructed with high-quality materials for durability and reliability. The true color of the cable is black..The cable has a 9-pin DB-9 RS-232 Serial male connector on one end and a USB 2.0 Type A male connector on the other, ensuring compatibility with a wide range of devices..Supports data transfer rates up to 115.2Kbps, providing efficient and stable connectivity for monitoring and controlling serial devices..Compatible with Windows, Mac OS, and Linux operating systems. For more details, refer to the extended description..Meets industry standards for USB and RS-232, ensuring reliable and consistent performance..Backed by Rocstor's 2-year warranty, providing peace of mind and reliable support for the lifetime of the product..Rocstor Premium FTDI USB to Serial RS232 Adapter Cable provides Effortless Serial Connectivity. Simplify your serial device connections with the Rocstor Premium FTDI USB to Serial RS232 Adapter Cable.

The U209-18N-NULL USB to Null Modem Serial FTDI Adapter Cable (M/F) allows you to connect a DTE serial device to a computer, laptop or tablet with a USB-A port. It supports data transfer speeds up to 256 Kbps-twice as fast as a built-in serial port. It solves DCE/DTE conflicts without additional cross-wired serial cables or adapters. No external power source is required. The compact 18-inch cable tucks away in your backpack or laptop bag for use anywhere. The hot-swappable U209-18N-NULL with built-in FTDI chipset offers COM retention. It automatically reassigns the same COM port values to each port in case the cable is disconnected or the system is rebooted.Premium foil and braid shielding delivers reliable, error-free signal quality and protection from EMI/RFI line noise. Molded nickel-plated connectors with gold-plated contacts ensure excellent conductivity. Integral strain relief ensures the cable and connectors last a long time. Works with Windows, Mac and Linux computers. Features Converts USB Port into RS-232 Null Modem Serial Port Solves DCE/DTE conflicts without additional cross-wired serial cables or adapters Supports data transfer speeds up to 256 Kbps-twice as fast as a built-in serial port No external power source required Portable 18 in. design fits perfectly into laptop bag COM retention for automatic reassigning of COM values to ports in case of disconnection or reboot Integrated FTDI FT232RL chipset First-Rate Construction for Superior Signal Transfer Premium foil and braid shielding for EMI/RFI noise protection Molded nickel-plated connectors with gold-plated contacts for optimal signal quality Integral strain relief for long life Flexible PVC jacket easy to install in tight spaces Broad Compatibility Compatible with Windows, Mac and Linux operating systems.Supports data transfer speeds up to 256 Kbps.Premium foil and braid shielding reduces EMI/RFI line noise.Compatible with Windows, Mac and Linux.No external power source required.Integrated FTDI FT232RL chipset

Serial RS232 adapter to convert any USB port into a serial RS232 port..Features a 9-pin DB9 male RS 232 USB on one end and a Type A male USB 2.0 on the other.Male to male terminals construction requires no separate adapter.Copper conductor enables superior conductivity.Data transfer rate of 115.2 Kbps ensures speedy data transfer.Portable USB powered design requires no external power adapter.Encased in a polyvinyl chloride jacket for durability.Requires one USB 1.1 port, making it easy to connect.Has 2 terminals for enhanced connectivity.Compliant Standards: CE, FCC, RoHS.Comes with a 2-year limited warranty

Connect an RS232 (DB9) peripheral to your USB-C device. This USB-C™ to serial adapter lets you connect your USB-C devices to your legacy serial equipment. It converts a USB-C port on your laptop or computer into a RS232 DB9 serial port, giving you a cost-saving way to connect to serial devices such as point-of-sale terminals, serial modems, industrial equipment, and a wide variety of other RS232 peripherals. Connect with ease The RS232 adapter cable is compatible with Windows®, macOS and Linux® operating systems, which makes it easy to integrate into mixed environments. Ready for mobile or desktop applications The USB-C to serial adapter is USB powered, so you don't need an additional external power supply. It's a compact solution that's easy to bring along with your laptop, when you're on the go. The ICUSB232C is backed by a StarTech.com 2-year warranty and free lifetime technical support..USB-C to straight-through RS232 DB9 serial adapter.High-speed 921.6Kbps baud rate.Compatible with Windows®, macOS® and Linux

The Lantronix SLC 8000 FRRJ451601 16-port RS-232 RJ-45 I/O module offers secure remote access to IT equipment, while reducing deployment costs and time. It requires 100 - 240 VAC power supply. It consumes less than 30 W power. It has 16 RJ-45 serial RS-232, dual 10/100/1000 base, USB 2.0, SD and SDHC card slot. It works on Embedded Linux platform. It features performance monitoring utility, packet generation utility, network trace utility and configuration audit log. This I/O module measuring 1 3/4" x 17 1/4" x 12", provides flexibility and efficiency of SLC 8000 deployments..I/O module provides secure remote access to IT equipment.Dimensions: 1 3/4"H x 17 1/4"W x 12"D.Power supply: 100 - 240 VAC, 50 to 60 Hz (single or dual), -20 to 72 VDC (dual), Power consumption: Less than 30 W.Interfaces/ports: 16 x RJ-45 Serial RS-232, dual 10/100/1000 base, 300 - 230400 bps, USB 2.0, SD and SDHC card slot.System: Embedded Linux.Management: Command line interface, Quick setup and configuration web interface (SSL), SNMP (MIB II) compatible-v1, v2, v3, custom MIB’s.Security & authentication: Secure shell (SSH v1, v2, public key), secure sockets layer (SSL v3, TLS v1), Remote authentication LDAP, RADIUS, Kerberos.Protocols supported: DHCP and BOOTP for dynamic IP address assignment, FTP, TFTP, SFTP, SCP client for file transfers, IPsec/VPN, RIP and RIPv2.Features performance monitoring utility, packet generation utility, network trace utility and configuration audit log.Provides flexibility and efficiency of SLC 8000 deployments while reducing time as well cost required to develop and deploy IT services.Contains one I/O module extractor and a RJ-45 loopback cable.Meets FCC Part 15, CE (EN55022, EN55024, EN60950), CSA, VCCI, UL/cUL, C-Tick, CB Scheme, NIST certifications and standards.Weight: 11.1 lbs..Comes with 3 years limited warranty

Reduce line costs by sharing a single modem and phone line between two RS-232 devices. Transparent operation up to 64 kbps with LED monitoring and front-panel RTS enable switches keep control simple. Antistreaming circuits lock out streaming ports, and support for IBM protocols including bisynchronous and SDLC expands use cases..LED indicators and RTS switches simplify control.Antistreaming circuitry improves reliability.Supports common IBM communications protocols

Connector details: 1 x 9-pin DB-9 RS-232 serial, connector details: 1 x 4-pin type A USB 1.1 USB.Male/male.Number of connectors: 2.Weight: 2.65 oz.Cable length: 2 3/4".Standard warranty: 2 year

The Sabrent CB-DB9P USB to Serial converter is the perfect solution for transferring data from a PDA or digital camera. The USB to DB9 provides a connection between an available USB port and the more traditional RS-232 serial port found on many devices. This adapter is designed for connections to cellular phones, PDAs, digital cameras, modems, or ISDN terminal adapters through your USB port. Simply plug your device into the adapter and the adapter into your PC or Mac..This cable is perfect for connecting your USB compatible devices.USB Type-A (4-pin) to Serial DB9 (9-pin) connectors.Comes in silver.Compatible with your computer.Cable length: 1'

Using modular adapters with inexpensive silver satin or flat oval twisted pair wire has become a standard way to run client server applications. Needing to connect dumb terminals on the desktop back to a central patch panel or directly to a MUX via RS-232, many network planners have implemented modular adapters as the most cost-effective way to complete the connections. Whether used in a wiring closet or throughout the office, color-coded modular adapters lend easy identification and differentiation to your cable plan. By color-coding your connections, you reduce troubleshooting time while taking full advantage of the benefits of this modular adapter approach..Data Transfer Adapter is reliable and offers convenient usage.Versatile and durable RJ-45/Serial adapter.Color-coded design simplifies installation and troubleshooting..Ideal for client-server applications and RS-232 connectivity in office environments.

USB.Cable length: 1'.Connector on first end: 1 x type A female USB 1.1 USB.Connector on second end: 1 x 9-pin DB-9 male serial.Dimensions: 1/2"(H) x 1.4"(W) x 16 1/2"(L).Interface: Serial.Enclosure type: Plastic.Baud rate up to 230 Kbps.Being able to rename devices no matter how many are plugged in.Built in loopback testing for quick trouble shooting.COM Port assignments maintained across reboot.Enables and disables enumerations, Supports loop back testing, supports remote wake up and power management control.Green compliant: Yes.Certifications & Standards: RoHS.Compatible with USB 1.1 and above.Weight: 1.2 oz..Warranty: 2 years

Zebra ZD400 Series field upgradeable serial module. The serial module option does not come preinstalled with any printer. Compatible with the following Zebra Printers: ZD421D, ZD421T, ZD421C, ZD611D, ZD611D-HC, ZD411T, ZD411D, ZD411D-HC..Serial module kit enabling RS-232 connectivity for desktop printers, ensuring efficient data transmission in business settings..Compatible with Zebra ZD421 and ZD411 desktop printers..This unit simply slots into the back of your printer and is easily installed in around 30 seconds.

Adapter cable is well suited for connecting monitor, bar code scanners, receipt printers, satellite receiver and serial modem for easy data transfer.A convenient length of 1' for ease of installation.Has 1 xdB 9 male first end, 1 x type A female USB second end connectors for clear transmission.Comprises of copper coated conductor with plastic enclosure to render high-tensile strength.Measures 0.6"H x 1.3"W x 15.7"L.Comes in black color for a new look.Compatible to use with Mac, PC, Windows 7 / Vista / XP (32/64-bit), 2000 / ME / 98SE, Server 2008 R2 operating systems.Features bus type of USB 2.0, Chipset ID of Prolific - PL-2303 with a serial interface having a port to deliver high-performance.Supports max baud rate of 921.6 Kbps and RS-232 Serial protocol to exchange the serial data.Comprises of COM port assignments, which are maintained across reboot and is powered by an available USB port.Works well with system including PC with an available USB 1.1 (or above) port for ultimate performance.Feasibly operates at temperature rating of -10 - 80 deg C and storage temperature of -20 - 100 deg C with humidity of 5 - 85% RH.Contains USB to serial adapter, driver CD and instruction manual for added convenience.Meets CE, FCC and RoHS standards.Weighs: 2.5 oz.Comes with 2 years warranty

Effortlessly connect your modern computer to legacy serial devices with the Rocstor 3ft USB to Serial Cable. This versatile adapter is perfect for IT professionals, industrial applications, POS systems, AV setups, and more. Easily connect RS232 (DB9) devices to your computer using this USB to serial adapter. The screw-lock nuts on the male serial DB9 connector ensure a secure connection. With a 3 ft (0.91 m) cable length, you have the flexibility to position your peripherals exactly where you need them. Ideal for connecting and monitoring serial devices such as barcode readers, network switches, receipt printers, PLCs, medical devices, oscilloscopes, and scales. Suitable for IT applications, industrial control, logistics, POS, AV installations, laboratories, and more. Maintain the use of legacy hardware with modern systems. Featuring a max baud rate of 921.6 Kbps, 512 Byte FIFO, and compatibility with Windows, macOS, and Linux. The integrated Prolific PL2303 chipset ensures reliable performance. Backed by Rocstor's limited lifetime warranty and free technical support, you can trust in the quality and longevity of this cable. Upgrade your connectivity with the Rocstor 3ft USB to Serial Cable and enjoy seamless communication between your modern and legacy devices..Ideal for data transfer, this cable is perfect for connecting and monitoring serial devices such as barcode readers, network switches, receipt printers, PLCs, medical devices, oscilloscopes, and scales..The cable measures 3 feet, providing ample length for flexible positioning of peripherals..Features a USB 2.0 Type A male connector on one end and a 9-pin DB-9 RS-232 serial male connector on the other end, ensuring a secure and reliable connection..Constructed with high-quality copper conductors and a durable PVC jacket, this cable is designed for optimum performance and reliability. The true color is black..Terminal type 1: 1 x USB 2.0 Type A male connector. Terminal type 2: 1 x 9-pin DB-9 RS-232 serial male connector..Supports a maximum baud rate of 921.6 Kbps, ensuring fast and efficient data transfer between your computer and serial devices..Compatible with Windows, macOS, and Linux operating systems. For more details, refer to the extended description..Complies with industry standards for USB to serial cables, ensuring reliable and consistent performance..Backed by Rocstor's limited lifetime warranty, providing peace of mind and assurance of quality..Bridge the Gap Between Modern and Legacy Devices with Rocstor 3ft USB to Serial Cable

Brainboxes Ethernet to 4 Digital IO and RS323 serial port device server supports fast ethernet technology with 10/100Base-TX network standard. Server delivers uncompromising performance of up to 1 megabaud and is rail-mountable..Serial port, network (RJ-45).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX, media type supported: Twisted-pair.Interface: 2 x RJ-45, 1 x serial port.Form factor: Rail-mountable.Power consumption: Input: 5 - 30 VDC, 100mA at 24 V 2.5 W (max).Digital inputs: 4, digital output type: Open drain transistor, protected MosFET, short circuit protection up to 36V, over temperature shutdown -175 deg C typical 150 deg C (min).Latched inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged.Counter inputs: User programmable- counts positive or negative transitions up to 100Hz.Watchdog: Active high/low, pulsed high/low.Logic level 0: 0 - 1 V, logic level 1: 2 - 30 V.Maximum output load voltage: 30 - 250 VAC, maximum output current sink: 5.0 A per channel.Operating systems: Windows server 2008 32 bit & 64 bit editions, windows vista 32 bit & 64 bit editions, mac OS X, windows server 2003 32 bit & 64 bit editions, windows XP 32 bit & 64 bit editions, microsoft windows 2000, Linux.Operating temperature: 0 - 60 deg C.Includes ED-004 4 Port Selectable DIO + RS232, installation CD (manual, Microsoft signed drivers & utilities, quick-start guide).Certifications and standards: CE, CCC-mark, C-TICK, RoHS, WEEE.Warranty: Lifetime limited.Brainboxes Ethernet to 4 Digital IO and RS323 serial port device server is supported with twisted pair media and has a RJ-45 network port.

This genuine Zebra accessory adds both Ethernet (10/100Base-TX) and RS-232 Serial ports, enabling reliable wired networking and serial communication for high-performance label printing. Whether you need to integrate your printer into a secure wired network or connect to legacy systems, this module ensures seamless and stable data transfer. The compact, lightweight design fits perfectly into the printer without adding bulk, maintaining a clean and professional setup. Installation is quick and hassle-free, allowing you to upgrade your printer without technical complexity or downtime. Specifically engineered for Zebra ZD620T printers, this module works across all major operating systems supported by Zebra printers, including Windows, Linux, and Mac OS. Built to Zebra’s high standards for durability and performance, this upgrade module is a cost-effective way to extend the functionality of your existing printer rather than investing in a new device. Backed by Zebra’s warranty and support, it offers peace of mind and long-term reliability. Enhance your printer’s connectivity today and keep your operations running smoothly with the Zebra Ethernet/Serial Upgrade Module..This is a genuine Zebra upgrade module designed to add Ethernet and Serial connectivity to Zebra ZD620T thermal transfer printers.Lightweight and compact design that integrates seamlessly into the printer.Specifically designed for Zebra ZD620T performance desktop printers.Compatible with all major operating systems supported by Zebra printers, including Windows, Linux, and Mac OS environments.Adds both Ethernet (10/100Base-TX) and RS-232 Serial ports for versatile wired networking options.Upgrade your Zebra ZD620T thermal transfer printer with the Zebra Ethernet/Serial Module, designed to provide enhanced connectivity and flexibility for your business operations.

Brainboxes Ethernet to digital IO/RS232/switch device server supports fast ethernet technology with 10/100Base-TX network standard. Server delivers uncompromising performance of up to 1 megabaud and is rail-mountable..Serial port, network (RJ-45).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX, media type supported: Twisted-pair.Interface: 2 x RJ-45, 1 x serial port.Form factor: Rail-mountable.Power consumption: Input: 5 - 30 VDC, 100mA at 24 V 2.5 W (max).Digital inputs: 4, digital output type: Open drain transistor, protected MosFET, short circuit protection up to 36V, over temperature shutdown -175 deg C typical 150 deg C (min).Latched inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged.Counter inputs: User programmable- counts positive or negative transitions up to 100Hz.Watchdog: Active high/low, pulsed high/low.Logic level 0: 0 - 1 V, logic level 1: 2 - 30 V.Maximum output load voltage: 30 - 250 VAC, maximum output current sink: 5.0 A per channel.Operating systems: Windows server 2008 32 bit & 64 bit editions, windows vista 32 bit & 64 bit editions, mac OS X, windows server 2003 32 bit & 64 bit editions, windows XP 32 bit & 64 bit editions, microsoft windows 2000, Linux.Operating temperature: 0 - 60 deg C.Includes Ethernet to digital/RS232/switch, installation CD (manual, Microsoft signed drivers & utilities, quick-start guide).Certifications and standards: CE, CCC-mark, C-TICK, RoHS, WEEE.Warranty: Lifetime limited.Brainboxes Ethernet to digital IO/RS232/switch device server is supported with twisted pair media and has two RJ-45 network ports.

Lantronix® UD1100IA2-01 1-Port Serial to ethernet industrial device server is a rugged and powerful tool that enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet. In minutes, securely connect factory floor devices to enterprise systems. Support RS-232, RS-422 and RS-485 communications..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports a baud rate of 300 bps to 230 Kbps.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity, XON/XOFF (software), CTS/RTS (hardware) types flow control.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP,UDP,TCP, ICMP,Telnet,TFTP, AutoIP,DHCP,HTTP, SNMP, TCP,UDP and Telnet,TFTP.Power supply is rated at 9 - 30 VDC, 3.3 VDC on serial interface.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ softwares.Supports Lantronix DeviceInstaller GUI, Serial login,SNMP, Telnet login,HTTP management.Box includes UDS1100-IAP industrial device server, 500-163 serial cable.Meets UL, CSA, FCC, CE,TUV, CTick,VCCI certifications and standards.Weighs 0.20 kg.Comes with 2 years limited warranty.Weight: 7.05 oz..Black.Lantronix® 1-Port Device server is a quick, inexpensive & simple way to bring the advantages of remote management to equipment. Delivers increased performance with the best memory.

Lantronix® UD1100002-01 1-Port Device server enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. On-board Flash memory offers room for future system software upgrades and maintenance-free, non-volatile web page storage. The built-in web server enables users to access and configure this server from a standard web browser..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports RS232, RS422 or RS485 modes, 300 to 921.6 kbps data rates and has 2 DB9 DTE serial ports for connectivity.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP and Telnet, TFTP, RFC2217.Power supply is rated at 100 - 240 VAC, 1.8 W max.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software.Box includes UD1100002-01 device server, power adapter, DeviceInstaller Software, Com Port Redirector software.Meets FCC, C/UL, CSA, VCCI, CE, TUV, Ctick certifications and standards.Weighs 0.4 kg.Comes with 2 years limited warranty.Includes UD1100002-01 device server, device installer software, com port redirector software.Weight: 7.05 oz..Black.Lantronix® 1-Port Device server is a quick, simple & inexpensive way to bring the advantages of remote management to equipment. Delivers increased performance with the best memory.

Lantronix® UD1100001-01 1-Port Serial to IP ethernet device server enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. Replace dedicated PCs and modem lines with fast and reliable Ethernet networking. It features TruPort Com port control technology for better performance..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports RS232, RS422 or RS485 modes, 300 to 921.6 kbps data rates and has 2 DB9 DTE serial ports for connectivity.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP and Telnet, TFTP, RFC2217.Power supply is rated at 110 VAC, 1.8 W max.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software.Box includes UD1100001-01 device server, DeviceInstaller software, Com Port Redirector software.Meets FCC, C/UL, CSA, VCCI, CE, TUV, Ctick certifications and standards.Weighs 0.4 kg.Comes with 2 years limited warranty.Black.Lantronix® Device server features Fast Ethernet technology that offers better performance. It supports RS232, RS422 and RS485 communications.

The Polycom 10' data transfer cable in black color, is suitable for use with Polycom RealPresence group system. It features one 8-pin mini-DIN RS-232 serial connection on first end and one DB-9 RS-232 serial connection on second end..Cable provides efficient connectivity from RealPresence Group systems to serial devices.Cable length: 10'.Connections: One 8-pin mini-DIN RS-232 serial on first end and one DB-9 RS-232 serial on second end.Connectivity: Wired.RoHS Compliant.Compatibility: Polycom RealPresence group system

Reliable Serial Connectivity with Rocstor's Premium Null Modem Cable Enhance your serial connections with the Rocstor DB9 RS232 Serial Null Modem Cable. This high-quality cable is designed to connect serial devices or enable direct PC-to-PC file transfers, ensuring efficient and reliable performance for your data transfer needs. Key Features: High-Quality Shielding: Prevents EMI interference, providing a stable and reliable connection for your serial devices. Molded Connectors: Features strain relief for enhanced durability and long-lasting use, ensuring your connections remain secure. Versatile Connectivity: Connects a 9-pin PC serial port to a serial device or facilitates PC-to-PC file transfers, making it a versatile addition to your setup. Lifetime Warranty: Backed by Rocstor's lifetime warranty and free technical support, offering peace of mind and reliable service. Whether you're linking a 9-pin PC serial port to a serial device or performing PC-to-PC file transfers, the Rocstor DB9 RS232 Serial Null Modem Cable is the perfect solution for stable and reliable serial connections. Trust Rocstor for quality and performance that stands the test of time..Designed for data transfer, this cable connects serial devices or enables PC-to-PC file transfers via a 9-pin PC serial port..The cable measures 3.28 ft (1 m), providing ample length for flexible and convenient installation..Features two 9-pin DB9 female connectors, ensuring secure and reliable connections..Constructed with 28 AWG copper conductors and a durable PVC jacket, this cable is built to last. The true color is black, making it easy to identify..Terminal Type 1: 1 x 9-pin DB-9 RS-232 Serial – Female; 1 x 9-pin DB-9 RS-232 Serial – Female.High-quality shielding prevents EMI interference, ensuring a stable and reliable connection..Compatible with PCs and modems. For a full list of compatible devices, refer to the extended description..Backed by Rocstor's limited lifetime warranty, ensuring peace of mind and reliable support.

StarTech.com® Adapter cable with FTDI is 3.3' long and has plastic material construction for added safety and long lasting durability. Offers maximum baud rate of up to 921.6 Kbps to ensure high performance. Cable has a DB-9 female serial connector on first end and type A male USB on second end for efficient connectivity. Portable USB-powered design requires no bulky power adapter or outlet for superior performance. FTDI - FT232RL Chipset ID is highly customizable and broadly compatible making it the perfect solution for any setup. Cable with relative humidity of 5 - 95 percent operates at 0 to 55 deg C temperature. Perfect choice for any RS232 application. Supports monitor, tablet PC, bar code reader and satellite receiver. Compatible with USB 1.1 or 2.0 port, Windows, Mac OS and Linux..USB/serial cable is well suited for connecting bar code scanners, receipt printers, program LED & digital signage boards with serial for data transfer.A convenient length of 3.3' for ease of installation.Has 1 x 9 pindB 9 female first end and 1 x 4 pin male USB A second end connectors for clear transmission.Comprises of copper coated conductor with a plastic enclosure to render high-tensile strength.Measures 0.6"H x 1.3"W x 7"L.Comes in black color for a new look.Compatible to use with Monitor, tablet pc, bar code reader, printer, satellite receiver, modem, PDU devices.Features bus type of USB 2.0, Chipset ID of FTDI - FT232RL with a serial interface having a port to deliver high-performance.Supports data bits of 7, 8, FIFO of 256 bytes with a max baud rate of 921.6 Kbps and generates none, odd, even, mark, space parity.Works well with system including one available USB 1.1 port and USB powered power source.Well designed for IT administrators looking to add legacy functionality to newer notebooks.Feasibly operates at temperature rating of 0 - 55 deg C and storage temperature of -20 - 85 deg C with humidity of 5 - 95% RH.Contains USB to RS-232 null modem adapter, driver CD and instruction manual for added convenience.Meets CE, FCC and RoHS standards.Weighs: 3.1 oz.Comes with 2 years warranty.StarTech.com® ICUSB232FTN 3.3' Black cable with USB and DB-9 serial connectivity allows to connect RS-232 port to laptop with a USB port. Supports baud rate up to 921.6 Kbps.

The Brainboxes US-101 Serial Adapter is perfect for everyday use..Device Type: Serial adapter.Packaged Quantity: 50 (specifications are for single item).Form Factor: External.Interface (Bus) Type: USB 2.0.Ports: RS-232.Dimensions (WxDxH): 1.4 in x 3.5 in x 0.8 in.Weight: 0.88 oz.Data Link Protocol: RS-232.Data Transfer Rate: 921.6 Kbps.Compliant Standards: USB 2.0.System Requirements: Microsoft Windows Server 2003, Microsoft Windows Server 2008, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits).Microsoft Certification: Compatible with Windows 7.Manufacturer Warranty: Limited lifetime warranty

The C2G® 1.5' USB-A male to DB9 male serial RS232 blue adapter cable allows to connect cellphones, PDAs, digital cameras, modems or ISDN terminal adapters through your USB port. It offers a data transfer rate of over 230 Kbps. This cable is great for connecting DB9 devices to a PC without serial ports..Adapter cable offers remote wakeup and power management.Cable length: 1.5'.Connections: 1 x 4-pin USB-A male to 1 x 9-pin DB9 male.Copper conductor for good conductivity.Certifications and standards: RoHS compliant.Used with PDAs, digital cameras and many other peripherals.Allows to support automatic handshake mode.Comes in blue color.96 byte buffer offers upstream and downstream data flow.Offers easy installation for end-user.RS-232 ports are kept free for other uses.Has no IRQs or IRQ conflicts.Bus-powered hub draws power from the host computer's USB interface.DB9 serial device can be easily converted to USB.Provides support for remote wake-up and power management.Weight: 0.164 lbs..Comes with 1 year limited warranty

Quickly connect legacy serial devices to Ethernet networks with a compact 1‑port server. Features include SSH v2 security, port buffering, and SNMP management for reliable console access and device monitoring..Bridges RS‑232 devices to TCP/IP networks..SSH v2 secures remote management sessions..Port buffering helps ensure data reliability..SNMP enables centralized monitoring and alerts.

Seamless Connectivity with Rocstor's USB to Serial Adapter Bridge the gap between legacy serial devices and modern USB ports with the Rocstor USB to Serial Cable. This premium adapter features a DB9 male RS232 connector and a USB A connector, making it easy to connect your older serial devices to newer computers without the need for upgrades. Key Features: USB to RS232 Adapter: Connects legacy RS232 serial devices to modern USB ports, ensuring compatibility and extending the life of your equipment. COM Port Retention: Maintains assigned COM port values across reboots and reconnections, providing seamless and hassle-free operation. High-Speed Data Transfer: Supports data transfer rates up to 921.6 Kbps, ensuring efficient and reliable communication. USB-Powered: No need for an external power adapter; the cable is powered directly by the USB port for convenience. Dual Buffers: Equipped with dual buffers for efficient upstream and downstream data transfer, enhancing performance. Remote Wake Up and Power Management: Supports automatic handshake mode and power management control for optimal functionality. Broad Compatibility: Works with Windows, Linux, and Mac OS, making it a versatile solution for various operating environments. Warranty: Backed by Rocstor's 2-year warranty and free lifetime technical support, ensuring peace of mind and reliable service..Designed for data transfer, this cable connects legacy RS232 serial devices to modern USB ports, ensuring compatibility and extending the life of your equipment..The cable measures 1 ft (0.3 m), providing a compact and convenient length for easy installation..Features a USB A connector and a DB9 male RS232 connector, ensuring secure and reliable connections..Constructed with high-quality copper conductors and a durable PVC jacket, this cable is built to last. The true color is black, making it easy to identify..Terminal Type 1: 1 x USB A – Male; 1 x DB9 RS232 Serial – Male.Supports data transfer rates up to 921.6 Kbps, ensuring efficient and reliable communication..Compatible with Windows, Linux, and Mac OS. For a full list of compatible operating systems, refer to the extended description..Meets industry standards for reliable performance and durability..Backed by Rocstor's 2-year limited warranty and free lifetime technical support, ensuring peace of mind and reliable service.

Effortless Serial Connectivity with Rocstor's Premium USB to Serial Adapter Upgrade your connectivity with the Rocstor 1 Port FTDI USB to Serial RS232 Adapter Cable. This high-quality adapter converts an available USB 1.1 or 2.0 port into an RS232 serial DB9 port, making it easy to connect, monitor, and control your serial devices. The standout feature of this adapter is its COM retention capability, which ensures that the same COM port value is automatically re-assigned if the cable is disconnected and reconnected or if the system is rebooted. This functionality guarantees consistent and reliable performance, minimizing the need for manual configuration. The adapter is compatible with a wide range of operating systems, including Windows, Mac OS, Linux, and Windows CE, making it easy to integrate into mixed environments. Its single-cable design enhances portability, and being USB-powered, it eliminates the need for an external power adapter, simplifying your setup and ensuring quick and easy serial port expansion. Whether you're connecting industrial equipment, legacy peripherals, or performing data transfers, the Rocstor 1 Port FTDI USB to Serial RS232 Adapter Cable is the perfect solution for reliable and efficient connectivity. Trust Rocstor for quality and performance that stands the test of time..Designed for data transfer, this cable converts a USB 1.1 or 2.0 port into an RS232 serial DB9 port, enabling you to connect, monitor, and control serial devices effortlessly..The cable measures 6 ft (1.8 m), providing ample length for flexible and convenient installation..Features a USB 2.0 Type A connector and a 9-pin DB9 male RS232 connector, ensuring secure and reliable connections..Constructed with high-quality copper conductors and a durable plastic jacket, this cable is built to last. The true color is black, making it easy to identify..Terminal Type 1: 1 x USB 2.0 Type A – Male; 1 x DB9 RS232 Serial – Male.Supports data transfer rates up to 115.2 Kbps, ensuring efficient and reliable communication..Compatible with Windows, Mac OS, Linux, and Windows CE. For a full list of compatible operating systems, refer to the extended description..Meets industry standards for reliable performance and durability..Backed by Rocstor's 2-year limited warranty and free lifetime technical support, ensuring peace of mind and reliable service.

Engineered for reliability and performance, the ASCSDB9F adapter bridges legacy serial devices with modern console servers using a compact, rugged design. Whether you're managing data centers, networking gear, or industrial systems, this adapter ensures seamless communication between RJ-45 Female and DB9 Female interfaces..Engineered for serial data communication and widely deployed across IT infrastructure, data centers, and industrial environments..Features an RJ-45 female connector and is compatible with the Raritan ConsoleSwitch SCS232 for reliable serial communication..Includes a DB9 female connector that delivers RS-232 serial output to compatible legacy devices..Equipped with female connectors on both the RJ-45 and DB9 ends, allowing seamless connectivity..Designed exclusively for data transmission.

Lantronix® Xdirect SGL port device comes with an c Ethernet port and serial cable, multiple power options. Port device provides a portable, extremely flexible and highly affordable network connectivity solution..Interfaces/ports: 10Base-T /100Base-T (auto-sensing), DB9F (DCE pinned).Dimensions: 9 1/2"(H) x 1.3"(W) x 1.1"(D).Modes: RS232, RS422* or RS485* (2 and 4 wire support).Baud rate: 300bps to 921.6 Kbps.Characters: 7 or 8 data bits, stop bits: 1 or 2.Parity: Odd, even, more.Control signals: CTS/RTS (hardware).Flow control: CTS/RTS, XON/XOFF.Connector: RJ45.Protocols: UDP, TCP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, HTTP, Telnet com port control.Power/status, link, activity, serial RX activity and TX activity.CPU: Based on DSTni-EX enhanced 16-bit x86 architecture.Memory: 256 KB SRAM, 1 MB flash.Input voltage: 5 V at mini-USB-B jack, input voltage: 5 - 15 VDC at DB9F pin 9.128/192/256-bit AES encryption.Environmental conditions: -40 - 85 deg C non-PoE models, -40 - 70 deg PoE model, humidity: 0% - 90% non-condensing.Weight: 0.15 lbs..Warranty: 5 years limited.Lantronix® Xdirect SGL port device is a compact serial-to- Ethernet device server and offers quick as well as easy Ethernet connectivity to virtually any device or machine with a serial interface.

The Sabrent (CB-9P6F) USB to Serial converter is the perfect solution for transferring data from a PDA or digital camera. The USB to DB9 provides a connection between an available USB port and the more traditional RS-232 serial port found on many devices. This adapter is designed for connections to cellular phones, PDAs, digital cameras, modems, or ISDN terminal adapters through your USB port. Simply plug your device into the adapter and the adapter into your PC or Mac. COM ports and Baud rates can be modified to desired set up..This cable is perfect for connecting your USB compatible devices.Cable length: 6'.USB Type-A (4-pin) to Serial DB9 (9-pin) connectors.Comes in silver.Compatible with your computer.Meets or exceeds Plug and Play and USB / USB 2.0 standards

The Honeywell 53-53000-3 9' serial PowerLink coiled cable adapter featuring 9-pin DB-9 RS-232 serial connector on first end, works with IS3480 QuantumE, MS1690 Focus, MS3780 Fusion and MS9590 VoyagerGS barcode scanner. This black cable adapter features copper conductor for better conductivity and optimum performance..Powerlink coiled cable adapter is suitable for use with barcode scanner.Comes in black color and has copper conductor for good conductivity.Compatibility: IS3480 QuantumE, MS1690 Focus, MS3780 Fusion, MS9590 VoyagerGS, Metrologic IS3480 QuantumE, MS1690 Focus barcode scanner.Cable length: 9'.Connector on first end: One 9-pin DB-9 RS-232 Serial

Brainboxes ES-571 RS232 Isolated industrial switch device server meets the most demanding dynamic computing workloads. Ethernet to serial server delivers increased performance with the exceptional memory..Measures 4.7" x 0.9" x 3.9".Has 1 port for easy connectivity.Supports 5, 6, 7 or 8 data bit characters, 1, 1.5 or 2 stop bits and odd, even, none, mark or space parity.Supports 1,000,000, Tx/Rx modes point to point, full duplex, half duplex autogating, hardware autogating data rates.Has XON/XOFF Software handshake or RTS/CTS hardware handshake types of flow control.The Ethernet Interface takes benefit of a company's pre-existing infrastructure.Supports protocols like software selectable as RS232, RS422/485 full duplex or RS485 half duplex, 4 PCB layers.Power supply is rated at typical 1.6 W, 60 mA, 24 V and maximum of 2.9 W.Includes an integrated DIN rail clip for mounting.Supports Microsoft Windows 8, Windows 7, Windows Server 2008, Vista, Server 2003, Windows XP, Linux OS.Meets AEO (C-TPAT), WEEE, RoHS, METL, FCC compliant, CE, Microsoft Certified Gold Partner certification and standards.Weighs 0.211 kg.Brainboxes RS232 1-Port Ethernet switch device server is designed to with stand demanding environmental conditions.

Lantronix® ED1100002-01 1-Port Secure serial to IP ethernet device server meets the most demanding dynamic computing workloads. It delivers increased performance with the exceptional memory..Measures 0.9"H x 2.5"W x 3.5"D.Runs on high performance 32-bit processor for reliable performance.Has 8MB SDRAM with 8MB flash memory for optimum storage.Supports twisted pair media.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports software selectable RS232, RS422 or RS485, software selectable RS485/422 termination and biasing modes.Has 1 x Network (RJ-45) port for easy connectivity, has XON/XOFF types flow controls, supports CTS, RTS, DTR/DCD modem control signals.Operates in 10BaseT and 100Base-TX Link network using HTTP, HTTPS, FTP, TFTP, Telnet, TCP/IP, UDP/IP, LPD,DHCP protocols.Supports security protocols like SSL v3, SSH v2 client & server.Power supply is rated at 9 - 30 VDC, 1.8 W maximum.Supports desktop form factor.Supports Windows 98/NT/2000/XP/Vista-Based DeviceInstaller™, ComPort Redirector™, Secure ComPort Redirector softwares.Supports internal web manager, CLI, XML configuration records via CLI or FTP, DeviceInstaller software management.Meets FCC part 15, subpart B, Class A, EN55022, Class A, EN55022 and EN55024, EN61000-4-2, EN6100-4-3 certifications and standards.Weighs 0.20 kg.Comes with 2 years limited warranty.Gray.Lantronix® 1-Port Secure serial to IP ethernet device server has the ability to with stand demanding environmental conditions.

Ideal for AT-to-AT file transfers. Gray PVC jacket with metal (EMI/RFI) hoods. Has 115-ohm nominal impedance at 1 MHz or above. Crosses Pins 2 and 3 for RS-232 standards compliance. Guaranteed for life!.Gray PVC jacket with metal (EMI/RFI) hoods.Has 115-ohm nominal impedance at 1 MHz or above.Crosses Pins 2 and 3 for RS-232 standards compliance

Lantronix® Device server enables users to connect, manage and control any piece of equipment from virtually anywhere over Ethernet. Server is a single port wall mountable dual-port device offers control to equipment..Compatibility: PC.Network standard: 10/100Base-TX.Dimensions: 0.9"H x 2.8"W x 3.7"D.CPU: Lantronix DSTNI-EX 48 MHz clock.Protocols: Arp, Icmp/ip, Tcp/ip, Udp/ip, Dhcp, Http, Snmp, Telnet.Number of ports: Ethernet, Fast Ethernet, RS-232, RS-422, RS-485.Operating supply voltage: 9 - 30 V.Power consumption: 1.8 W.Memory: 256KB SRAM, 2MB flash.Minimum operating system required: Microsoft Windows 98/ME/NT/2000/XP.Status indicators: Link activity, Port duplex mode, Power, Status.Black.Lantronix® UD2100002-01 Device Server is a single port wall mountable device server that comes with Lantronix DSTNI-EX 48 MHz clock processor, designed for PC.

Quickly and easily add a serial port to your desktop to connect to your serial and parallel peripherals with the HP USB Serial Port Adapter, which plugs into any USB port on your PC..Transfer data in a snap.Serial and USB ports for instant connectivity.1 x 9-pin DB-9 Female RS-232 Serial establishes rapid connection with a PC

A secure, reliable 32‑port RS‑232/422/485 terminal server for serial‑to‑IP connectivity. Ideal for data centers and industrial sites, it supports flexible configuration, remote management, and robust isolation features..Consolidates up to 32 serial ports on Ethernet..Supports RS‑232/422/485 across diverse devices..Web/Telnet configuration with centralized tools..Rugged design for enterprise and industrial use.

Brainboxes Device server has wide operating voltages of 5 - 30 VDC input. Server features data transfer rates of up to 1000000 baud and coupled with 1 Mbps line drivers which deliver uncompromising performance..Network Certificates and standards: 10Base-T/100Base-Tx.LAN Ports: Ethernet 10Base-T/100Base-Tx.Connectivity technology: Wired.Protocol: Ethernet, fast ethernet, RS-232, RS-422, RS-485 data link, TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP network/transport.Form factor: DIN rail mountable.Status indicators: Port status, link activity, link OK.Voltage required: 5 - 30 VDC.Power consumption: 2.9 W.OS required: Microsoft Windows 2000/2008/2003 Server, Windows Vista/7/xP/ (32/64 bits).Operating distance: RS422/485 standard (4000 ft : 1200 metres) / EIA - RS232.Max baud rate: 1000000 baud.Features: Flow control, full duplex capability, auto-uplink (auto MDI/MDI-x).Operating tempreature: 176 - -22 deg F.Operating humidity range: 5 - 95 (non-condensing).Certifications and Standards: ISO 9001, ISO 14001, EMC, RoHS, WEEE, IEC 60529 IP30.Warranty: lifetime.Brainboxes Device server has removable screw terminals blocks for easy wiring and supports legacy software using COM port interfacing.