Short LAN Cables
200 resultsOS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.6.56 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.6.56 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty.This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.9.48 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 3.2ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime
Crossover cables directly link one computer to another on a Local Area Network (LAN). The Belkin RJ45 CAT 5e UTP crossover cable with molded strain relief is designed to connect Hub-to-Hub, PC-to-PC or Mac-to-Mac. Features RJ45 male-to-male connectors and a molded strain relief. Perfect in conjunction with 10 and 100 Base-T networks..Ensures clean and clear transmissions with 50-micron, gold-plated connectors.Provides extra security around connector via molded-strain relief.Belkin lifetime warranty.Exceeds the performance requirement of Category 5e.7' length; yellow color.Manufacturer's lifetime warranty
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 6.56ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime
Belkin CAT5e RJ45 Patch cable in blue color is 7' long and has 50 micron gold plated connectors to ensure perfect transmission. Cable offer reliable connection from IT hardware to network and ideal for use with 10 or 100 base-T networks..7' long.Blue.1 each.Connector on second end: 1 x RJ-45 - male.Connector on first end: 1 x RJ-45 - male.Cable details: patch cable.Cable type: category 5e.Standard warranty: lifetime.The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.9.84 ft. for short distance application.This cable is Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty
OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 6.56ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime
Connect your computer system to a router, switch or hub with the Monoprice 100134 CAT-5e Cable that offers reliable Ethernet connectivity. This networking cable features an RJ-45 male connector at one end and an RJ-110 female connector at the other, for seamless transfer of signals between devices. Its high-quality copper conductor is sheathed in a sturdy jacket for durability and optimal insulation of the wire..CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male and 1x RJ-110 Female connectors for connecting networking devices.7' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty.The Monoprice 100134 7' CAT-5e Ethernet Network Cable, Blue, supports 1000 Mbps networks to provide uninterrupted data transfer.
Monoprice® 7' Cat5e UTP Ethernet network cable with a data transfer speed of 350 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in yellow color has snagless strain relief boots and provides reliable performance..Yellow.Cat5e.Fixed length network cables are the perfect combination of value and performance.7'.Gauge: 24 AWG.Cable rating: 350 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 7' Cat5e UTP Ethernet network cable in yellow color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.
The Belkin 6' yellow Cat6 snagless patch cable features RJ-45 50-micron gold-plated male connectors on both ends for clear signal transmission. This male/male cable is great for VoIP, video and file transfers. It helps to maximize your network speed with higher bandwidth. This patch cable features a staggered pin configuration, has bare stranded copper conductors for high conductivity and a PVC jacket for added durability. It is compatible with Belkin Omniview SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switch..Cat6 UTP snagless patch cable is suitable for VoIP, video and file transfers.Cable length: 6'.Connections: one RJ-45 male connector on both ends.PVC Jacket for added durability and 4-pair 24 AWG bare stranded copper conductors for excellent signal transmission.Meets ISO/IEC 11801, TIA/EIA-568-B.2-1 standards and certifications.Contact material: 50 micron gold-plated.Compatible with Belkin Omniview SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switchComes in yellow color.Diameter: 5.9 mm + 0.15 mm jacket.Dielectric strength: 1.5 kV (AC).Dielectric strength: 1.5 kV (AC).Resistance: 93.8 Ohm/km/20 deg C max, Impedance: 100 Ohm + 15 Ohm at 1 - 550 MHz.Mutual capacitance: 56 pF/m max.Propagation delay: 536 ns/100 m max. at 550 MHz, Structural return loss: 8.6 dB min at 550 MHz.Staggered pin configuration ensures optimal data transmission.CM flame retardant tested.Comes with lifetime limited warranty
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 6.56ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime
CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty
OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.3.28 ft. cable for short distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty
Patch cable..CAT-6 for seamless connection over a network.Dual gold-plated RJ-45 male connectors for a flawless connection.7' CAT-6 allows convenient tethering
Patch cable..CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.7' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty
The Belkin™ A3L980-01-ORG-S CAT-6 1' snagless Ethernet patch cable in orange color, helps in connecting your network outlet with a patch panel or to terminate your own patch cords. This cable consists of four twisted pairs of stranded 24 AWG copper wires that prevent crosstalk. This snagless cable is suitable for use with 100/1000Base-T networks. The cable features 50 micron gold-plated male RJ-45 connectors to ensure clear transmission and the snagless mold protects RJ-45 tab from damage during installation..CAT6 snagless Ethernet patch cable is perfect for connecting to LANs or the internet.Cable length: 1'.Comes in orange color with PVC jacket, HDPE insulation.Output Voltage: 18.5 V.Power Capacity: 65 Watt.Output connectors: 1 x power DC jack 4.5 mm.Included Accessories: 4.5mm to 7.4mm power DC dongle.Dimensions (WxDxH): 4.2 in x 1.9 in x 1.1 in.Designed For: HP 250 G3, 25X G2; Elite x2; EliteBook 25XX, 725 G2, 745 G2, 755 G2, 820 G1, 820 G2, 840 G1, 840 G2, 850 G2; EliteBook Folio 1040 G2, 10XX G1; EliteBook Revolve 810 G1, 810 G2; Mobile Thin Client mt41; ProBook 430 G1, 430 G2, 450 G2, 45X G1, 640 G2, 64X G1, 65X G1; ZBook 14, 14 G2, 15u G2.Ideal for use with 100-1000Base-T networks.Snagless, molded, strain relief design prevents cracking and breaking.PowerSum tested, CM flame-retardant test, 2.5 kV spark test.Meets ISO/IEC 11801; TIA/EIA-568-B.2-1 standards
Establish a reliable connection between your computer and network devices by using this patch cable. A PVC jacket protects this Belkin Ethernet patch cable from damage, while the RJ45 connectors are easy to plug in with internal load bars..CAT5e Ethernet patch cable with extra headroom for connecting to LANs or the Internet.6.56' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets the CAT5e standard and is suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Get clear data transmissions with this 6.56-foot Belkin Ethernet patch cable.
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking in data centers, enterprise setups, and telecom environments, this cable ensures seamless connectivity between devices requiring LC-to-LC fiber optic connections.Offers a convenient 1.64 feet (0.5 meters) length for short-distance, clutter-free installations.Equipped with LC male connectors on both ends, delivering secure and precise fiber optic connections.Constructed with 50/125 µm OM3 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in a blue color for easy identification.Supports 10 Gbps data transfer speeds, ensuring reliable performance for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.2-year manufacturer warranty
Stream your games to your laptop effortlessly and get high-resolution images with this 3-foot cable. The 50-micron gold-plated connector lets you get clear signals, while an internal load bar ensures an accurate fit. Made with durable stranded copper wires, this Belkin CAT-5e crossover patch cable supports Gigabit Ethernet speeds, which ensure consistent high performance in office and server setups..Crossover cable for connecting network devices of the same type.Cable length: 3 ft..RJ-45 plugs with 50-micron gold-plated connectors for clear signals.Comes in yellow color.Meets CAT-5e Ethernet network cable standard.Minimizes crosstalk with four twisted pairs of stranded copper wires.Molded strain relief provides extra security around connector.Perfect in conjunction with 10/100BASE-T networks.2-year manufacturer limited warranty.Connect and easily transmit data between two network devices with this Belkin CAT-5e crossover patch cable.
Monoprice® 3' Cat6A STP Ethernet network cable with a data transfer speed of 500 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in blue color has snagless strain relief boots while offering EMI and RFI interference protection..Blue.Cat6a.Fixed length network cables are the perfect combination of value and performance.3'.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Network cables are great for environments that are more susceptible to electronic interference.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 3' Cat6A STP Ethernet network cable in blue color is constructed from 24AWG stranded pure bare copper conductor for long lasting durability.
Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 1-foot gray patch cable is perfect for use in server closets, patch panels and with Ethernet hubs. The cable is intended for short-distance applications such as point-to-point in-rack and across-rack network switch and server connections. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH1GR is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Gray PVC jacket for color coding your connections.1 ft. in length for shorter connections, without the clutter of excess cable
Comprehensive CAT6 550 Mhz Snagless Patch Cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief. Comprehensive Patch Cables are available in a variety of colors. RoHS Compliant. Lifetime Warranty. When it has to work, it has to be Comprehensive!.Connecting devices to a local area network (LAN) for wired internet and data transfer. Ensuring stable and high-speed internet connectivity..This cable is 3 feet long..Cable uses RJ45 connectors on both ends. RJ45 connectors are standard for Ethernet cables and have the following features: RJ45 Connector Details: Connector Type: RJ45 (8P8C) Pin Count: 8 pins.It is constructed with a 24 AWG (American Wire Gauge) stranded copper conductor, ensuring flexibility and durability. It is encased in a CM Grade PVC (Polyvinyl Chloride) jacket, providing reliable insulation and protection. The cable is colored yellow, offering clear identification.primarily focuses on providing high-speed data transfer and reliable network connections with Data Transfer Rate: Up to 10 Gbps (10,000 Mbps)..Compatible with a variety of devices. Here are some common examples: Computers: Desktops, laptops, and servers. Network Switches: Managed and unmanaged switches. Routers: Home and office routers..Comes with a Life time warranty.
Duplex patch cable..CAT-6 for efficient data transfer across a network.Gold-plated RJ-45 male connectors on both sides for easy connectivity.6' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty
Snagless duplex patch cable..CAT-6 to conveniently connect network devices.Capable of transmitting data at 100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 for easy tethering.Comes with a lifetime limited warranty
The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the cables are compliant to fiber type B1.3 in IEC 6 793-2-5-7 G652d capable of supporting up to 1 gigabit applications over very long distances..Engineered for high-speed networking, this single-mode fiber optic cable is ideal for connecting servers, switches, and enterprise-grade network equipment, ensuring fast and reliable data transmission over long distances.The cable measures 1.64ft (0.5m), making it perfect for short-distance connections with minimal clutter.Features LC male connectors on one end and SC male connectors on the other, providing a secure duplex single-mode fiber link for efficient data transfer.Constructed with 9/125 µm OS2 fiber for superior signal quality, the cable includes a Low Smoke Zero Halogen (LSZH) jacket for safety and durability, and comes in a bright yellow color for easy identification.Supports up to 1Gigabit applications, delivering exceptional performance for demanding single-mode network environments.Works seamlessly with devices requiring LC to SC single-mode fiber connections, including enterprise switches, routers, and storage systems.Compliant with OS2 specifications and IEC 60793-2-50 G652d standards, ensuring top-tier performance and safety.2 Years Manufacturer's Warranty
Monoprice® 3' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in blue color has snagless strain relief boots and offers high performance..Blue.Cat6.Features molded, snagless strain-relief boots.3'.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 3' Cat6 UTP Ethernet network cable in blue color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.
CAT6 PATCH CABLE 5FT BLUE.Cat6 UTP snagless patch cable is perfect for VoIP, video and file transfers.Cable length: 5'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG copper conductors for better conductivity.ISO/IEC 11801 and TIA/EIA-568-B.2-1 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Belkin OmniView SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switch.Comes in blue color.Enhances your network speed with higher bandwidth.Diameter: 5.9 mm + 0.15 mm jacket.Voltage: 300 V, Dielectric strength: 1.5 kV (AC).Resistance: 93.8 Ohm/km/20 deg C max, Impedance: 100 Ohm + 15 Ohm at 1 - 550 MHz.Mutual capacitance: 56 pF/m max.Temperature: 75 deg C.Propagation delay: 536 ns/100 m max at 550 MHz, Structural return loss: 8.6 dB min at 550 MHz.Staggered pin configuration for secure connection.CM flame retardant test.Comes with lifetime limited warranty
Discover the ALOGIC fiber optic network cable, a solution designed for high-speed, reliable network connections. This duplex cable is engineered with a 50 / 125 micron core and cladding diameter, ensuring efficient data transmission and compliance with OM4 standards. The use of Low Smoke Zero Halogen (LSZH) material for the jacket makes it safer for the environment by reducing toxic emissions in case of fire and provides a durable construction for long-term use. Equipped with male LC multi-mode connectors on both ends, it offers easy and secure connections for a wide range of networking equipment. Whether you're setting up a new network or upgrading an existing one, the ALOGIC network cable is a smart choice for performance and safety..Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering exceptional performance for critical applications.Convenient 4.92ft length for short-distance connections, reducing clutter while maintaining superior signal integrity.LC to LC connectors ensure secure, precise, and low-loss optical signal transmission for maximum efficiency.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for demanding workloads.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty
Connect your computer system to a router, switch or hub with the Belkin A3L980-01-BLK-S CAT-6 Cable that offers reliable Ethernet connectivity. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor. The cable's snagless design lowers the risk of snapping during installation and reduces connector clip damage..CAT-6 for seamless connection over a network.Designed to transmit data at 10000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.1' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.The Belkin A3L980-01-BLK-S 1' CAT-6 RJ-45 Snagless Patch Cable, Black, supports 10 Gigabit Ethernet networks to provide uninterrupted data transfer.
The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the cables are compliant to fiber type B1.3 in IEC 6 793-2-5-7 G652d capable of supporting up to 1 gigabit applications over very long distances..This premium single-mode fiber optic cable is designed for high-speed networking, making it perfect for connecting servers, switches, and enterprise-grade network equipment that demand reliable long-distance data transmission.The cable measures 6.6ft (2m), offering the ideal length for clean and efficient short-to-medium distance connections.Features LC male connectors on one end and SC male connectors on the other, ensuring a secure duplex single-mode fiber link for fast and stable data transfer.Constructed with 9/125 µm OS2 fiber for superior signal quality, the cable includes a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety and durability, and comes in a bright yellow color for easy identification.Supports up to 1Gbps data transfer rates, delivering exceptional performance for demanding single-mode network environments.Works seamlessly with devices requiring LC to SC single-mode fiber connections, including enterprise switches, routers, and storage systems.Compliant with OS2 specifications and IEC 60793-2-50 G652d standards, ensuring top-tier performance and safety.2 Years Manufacturer's Warranty
Monoprice® 2' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in green color has snagless strain relief boots and offers high performance..Green.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.2'.Gauge: 24 AWG.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 2' Cat6 UTP Ethernet network cable in green color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.
The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 0.5m to 100m length.Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, ensuring reliable performance for demanding applications.Offers a convenient 4.92ft length, ideal for short-distance connections without clutter or signal loss.Equipped with LC to LC connectors for secure, precise, and low-loss optical signal transmission.Built with OM3 multimode fiber for 10Gbps speed, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports ultra-fast data transfer up to 10Gigabit Ethernet, making it perfect for high-bandwidth applications.Works seamlessly with OM3-rated fiber optic equipment, including transceivers, patch panels, and network hardware.Meets ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-notch quality and compliance.2 Years Manufacturer's Warranty
Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty
With RJ-45 male-to-male connectors, this high-performance Category 6 UTP Patch Cable is an ideal performance upgrade for any network. PowerSum tested and exceeding performance requirements for Category 6, its internal load bar assures accurate positioning of pairs and consistent high performance. Its 2-row, staggered pin configuration controls cross-talk at hyper-frequencies. Use it to replace any Cat5 cable that fails to support 1000BaseT Gigabit Ethernet..Maximize your network speed with a 7-foot high-bandwidth CAT6 cable..Ideal for VoIP, video, and file transfers.Exceeds 500MHz in performance tests.CAT6 Ethernet patch cable for connecting to LANs or the Internet.Ideal for use with 100-1000BASE-T networks.RJ45 plugs with 50-micron gold-plated connectors for clear signal.4 twisted pairs of stranded copper wires prevent crosstalk.UTP stranded copper wires.Snagless design prevents cracking and breaking.Durable PVC jacket.RJ45 plugs with 50-micron gold-plated connectors.Molded strain relief.Belkin Lifetime Warranty.This cable is perfect for connecting 10/100/1000 networks and capable of improving return loss in your current network by 40%. 50 micron gold-plated connectors ensure clean, clear transmissions.
Monoprice® 14' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in red color has snagless strain relief boots and offers high performance..Red.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.14'.Gauge: 24 AWG.Cable rating: 550 MHz.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 14' Cat6 UTP Ethernet network cable in red color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.
CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 100 Mbps.Gold-plated RJ-45 male network connectors on both sides for dependable network connectivity.7' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty
Tripp Lite 7' Cat5e patch cord in black color is made of PVC and is rated for 350MHz/1 Gb/s communication. Cord features 1 RJ-45 male connector on both the ends..Type: Patch cable - CAT 5e.Technology: UTP.Wires per Cable: 8 wires.Features: Molded, stranded, snagless.Length: 7 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: Black.Package Type: Retail.Manufacturer Warranty: Limited lifetime warranty.Tripp Lite 7' Cat5e patch cord in black color offers optimal data transmission and features molded snagless design.
This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this seven-foot blue cable ensures peak performance throughout your local area network (LAN). This Cat6 UTP patch cord is more than 38% smaller in diameter than standard Cat6 cable. This increases airflow in tight spaces, which helps keep your equipment cool and properly functioning. It also makes the cable easier to install around corners and through cable management panels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. This Cat6 UTP patch cable features a blue PVC jacket. The color-coding allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected. Manufactured from 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 1 Gbps. The ends feature 50-micron gold plating to help ensure the most accurate signal transfer possible. Integral strain relief gives the unshielded cable extra flexibility, reduces stress, and helps the cable move freely without cracking or breaking loose from the connector. The N201-S07-BL is backed by a limited lifetime warranty, ensuring reliability and performance..This cable is perfect for connecting your data devices.Cable length: 7'.RJ45 to RJ45 connectors.28AWG blue cable has stranded copper conductor with PVC jacket to protect stranded copper conductor from environmental factors.Meets or exceeds REACH and RoHS standards.Cable features molded construction.Lifetime manufacturer limited warranty
Save the time and hassle of building Ethernet cables by using fixed-length UTP Cat6 Ethernet Network Cables from Monoprice! The ZEROboot series of Ethernet cables are designed for IT and data center professionals who prefer interconnect cables without the covers that protect the plug retaining clips, allowing for faster and easier cable connections. Features: Unshielded Twisted Pair (UTP) Category 6 Ethernet cable 24AWG stranded, pure bare copper conductors 550MHz bandwidth No protective plug retaining clip covers 50µm gold plated contacts 7-foot length (tip to tip) Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Delivers fast data transfer and optimal signal quality.Constructed with durable materials for long-lasting use.Slim design ensures easy installation and space efficiency
The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty
Belkin CAT5e RJ45 Patch cable in blue color is 3' long and has snagless-type moldings to ensure protection for connection. Cable offer reliable connection from IT hardware to network and ideal for use with 10 or 100 base-T networks..3' long.Blue.1 each.Cat5e, 10/100 base-T patch computer cables.Snagless.The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.