Snagless Patch Cables

Snagless molded patch cable..White.Category 6 RJ45 male/RJ45 male.Molded connectors with integral strain relief.14'.Material: Polyvinyl chloride (PVC) jacket.Conductor: Copper.Device supported: Network device.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Wires per cable: 8 wires, Pairs per cable: 4 pairs, Wiring scheme: T568B.Communications: 550 MHz/1 Gbps.Deliver stable performance up to 550 MHz/1 Gbps communication.Drastically reduce impedance and structural return loss compared to standard 100 MHz wire.Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.Includes 14' Cat6 white gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited

The C2G 3975 6' black Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Category 6 for Network Device.RJ-45 Male.6ft.Black.Certifications & Standards: TIA/EIA.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Comes with lifetime warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.3' CAT-6 for easy tethering.Comes with a lifetime limited warranty

Snagless molded patch cable..CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

Make Power-over-Ethernet-capable Gigabit network connections - 50ft Cat6 Cable / 50' Ethernet Patch Cable / 50 ft Gigabit Cat6 Cable - Yellow Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 50 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

CAT-6 for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.15' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

CAT-6 cable provides an easy connection for network devices and supports data transfer speeds of up to 1,000 Mbps..Dual gold-plated RJ-45 male connectors for a flawless connection.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

The C2G ® 50' male to male category 6 snagless blue patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 50'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Features durable polycarbonate connector and four twisted pair 24 AWG stranded bare copper for good conductivity.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Unshielded twisted pair technology for less signal loss.Comes in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 1.35 lbs..Comes with lifetime warranty

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

CAT-5e to conveniently connect network devices..Capable of transmitting data at 1024 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.20' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty

The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty

The C2G ® 3' red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

Tripp Lite Cat6 Snagless Molded Patch Cable, 10 Ft, Gray.Designed for high-speed data transfer.Reduces cross-talk and return loss.Snagless boot.Connectors: RJ45 Male/RJ45 Male.Drastically reduce impedance and structural return loss compared to standard 100MHz wire.High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.Tripp Lite 10' Cat6 patch cable in gray color is ideal for category 6, category 5e and category 5 applications.

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.6' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

Startech® 35' Cat 6 Snagless RJ-45 Male/Male Patch Cables31.Cat6 utp patch cable offers reliable signal routing.Easy-to-install 35' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.StarTech.com® N6PATCH35BK 35' Black UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.

CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.25' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

CAT-5e to conveniently connect network devices is capable of transmitting data at 100 Mbps..CAT-5e to conveniently connect network devices.Capable of transmitting data at 100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.6' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

Tripp Lite N201-001-BL CAT-6 Gigabit Snagless Molded Patch Cable, 1 ft..Meets Category 6 cabling standards.Premium cabling for CAT-6, CAT-5E & CAT-5 applications.Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 & ETL (Category 6, draft 11).Drastically reduces impedance & structural return loss compared to standard 100MHz wire.Snagless boots protect the locking tabs on the RJ45 male connectors from being damaged during installation.Features molded connectors with integral strain relief.Rated for 550MHz/1Gbps communication.Blue.Lifetime limited warranty.The Tripp Lite N201-001-BL 1' RJ-45 CAT-6 Patch Cable, Blue, supports 10 Gigabit Ethernet networks to provide uninterrupted data transfer.

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 12-foot orange patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionsEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH12OR is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Orange PVC jacket for color coding your connections.12 ft. in length

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

Tripp Lite 2' Molded gigabit patch cable in gray color has 2 RJ45 male connectors and features boots with integral strain relief. Cable has snagless design which protects the locking tabs and provides cabling for category 6, 5 and 5e applications..Gray.Category 6 RJ45 Male/RJ45 Male.Snagless, molded, stranded, booted.2'.Material: Polyvinyl chloride(PVC) jacket.Conductor: Copper.Device supported: Network device.Applications: Computer networking.Technology: Unshielded twisted pair (UTP).System requirements: For 1000Base-T (1Gbps ethernet), 10/100Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type3 applications as well as EIA/TIA applications.Provides EMI/RFI shielding in ethernet networks, molded boot for extra strain-relief and durability.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.TSB 568B (AT and T 258A)wiring.Includes 2' Cat6 gray gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab/ IEEE 802.5/ ANSI/EIA/TIA 568/ ISO/IEC 11801/ ETL/ RoHS.Warranty: Lifetime.Tripp Lite 2' Molded gigabit patch cable in gray color is manufactured from PVC 4-pair stranded UTP and is suitable for 550 MHz/1 Gb/s communication.

This C2G 50' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is useful for high performance networking applications..Cable length: 50'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 1.38 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Kensington Technology Mobile Tablets Blue Kensington Trapper Keeper Universal Case - Designed with a mead-inspired style

CAT-6 for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.100' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.14' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

StarTech N6PATCH10BL Cat6 Patch Cable with Snagless RJ45 Connectors, 10ft, Blue.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

CAT-6 for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.20' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

Tripp Lite N201-100-BL CAT-6 Gigabit Snagless Molded Patch Cable (100ft).Meets Category 6 cabling standards.Premium cabling for CAT-6, CAT-5E & CAT-5 applications.Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 & ETL (Category 6, draft 11).Drastically reduces impedance & structural return loss compared to standard 100MHz wire.Snagless boots protect the locking tabs on the RJ45 male connectors from being damaged during installation.Features molded connectors with integral strain relief.Rated for 550MHz/1Gbps communication.Blue.Lifetime limited warranty.The Tripp Lite N201-100-BL 100' CAT-6 Patch Cable, Blue, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

The C2G ® 3' red Cat6 snagless shielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 26 AWG bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 3'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in red color.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.High quality cable and plug construction effectively minimizes near-end crosstalk levels.Protects from EMI/RFI interference.Weight: 0.05 lbs..Comes with lifetime warranty.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments

CAT6 Snagless Patch Cable, 14 ft, Black45.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.14' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.Designed for high-speed data transfer.Reduces cross-talk and return loss.Snagless boot.The Tripp Lite N201-014-BK 14' CAT-6 Snagless Patch Cable, Black, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

StarTech.com's 50ft Blue Cat6 UTP Snagless Patch Cable is constructed of top quality materials (100% Copper conductors, 23 Gauge Wire, 50 micron Gold Connectors) to ensure optimum performance and durability and is backed by our Lifetime Warranty..RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty.Constructed with top quality components

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Offers a reliable network connectivity.Features Category 6 cable type.Protects the plug and socket from dust when plugged in

Tripp Lite 5' Molded patch cable in red color has snagless design to protect the locking tabs on the RJ45 male connectors. Cable is constructed from PVC 4-pair stranded UTP and reduces cross-talk or return loss..Red.Category 6 RJ45 Male/RJ45 Male.Snagless, molded.5'.Material: Polyvinyl chloride(PVC) jacket.Conductor: Copper.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Communications: 550 MHz/1 Gbps.All cables feature boots with integral strain-relief and RJ45 (Male) connectors.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.TSB 568B (AT and T 258A)wiring.Includes 5' Cat6 gray Gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited.Tripp Lite 5' Molded patch cable in red color is rated for 550 MHz/1 Gb/s communications and provides premium cabling for category 6, 5 and 5e applications.

Connect your computer system to a router, switch or hub with the Tripp Lite N201-003-OR CAT-6 Cable that offers reliable Ethernet connectivity. RJ-45 male connectors are fitted at both ends of this networking cable for efficient signal transfer between devices. Its high-quality copper conductor is sheathed in a PVC jacket for durability and optimal insulation of the wire. The cable's snagless design lowers the risk of snapping during installation and reduces connector clip damage..Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.3' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty.The Tripp Lite N201-003-OR 3' CAT-6 Snagless Patch Cable, Orange, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.12' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The C2G 22014 15' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15ft.Blue.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty

CAT-5e for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 1-foot gray patch cable is perfect for use in server closets, patch panels and with Ethernet hubs. The cable is intended for short-distance applications such as point-to-point in-rack and across-rack network switch and server connections. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH1GR is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Gray PVC jacket for color coding your connections.1 ft. in length for shorter connections, without the clutter of excess cable

Tripp Lite® 25' Cat6 molded patch cable in blue color has snagless pattern that offers protection for locking tabs on RJ45 male connectors. Cable with 4 pair stranded UTP is ideal for application requiring stable performance up to 550MHz/1 Gb/s..25ft.1 x RJ-45 Male.Blue.Material: Polyvinyl chloride (PVC) jacket.Connector details: 1 x RJ-45 male network on first and second end.Technology: Unshielded twisted pair (UTP).Conductor: Copper, Wires per cable: 8, Pairs per cable: 4.Features: Snagless, molded.Application: Computer networking.System requirements: or 1000 Base-T (1Gbps Ethernet), 10/100 Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring TYPE 3 applications as well as EIA/TIA applications.Drastically reduce impedance and structural return loss, staggered-pin plug design to keep near-end crosstalk levels to a minimum.Integral strain relief.Certification and Standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL, RoHS.Warranty: Lifetime limited.Tripp Lite 25' Cat6 Gigabit snagless molded patch cable in blue color has a molded design to provide reliable performance and enables high speed distribution of data, voice as well as video.

10ft Cat6 Snagless Unshielded (UTP) Network Patch Cable - Red.Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Red

The C2G ® 10' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Yellow

The C2G 3975 6' blue Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Dimensions: 6'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Type: Patch cable - CAT 6.Technology: UTP.Wiring Scheme: T568B.Wires per Cable: 8 wires.Features: Snagless, stranded , minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Manufacturer Warranty: Limited lifetime warranty

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Experience a simpler way to connect devices with the entire business network.Features Category 6 cable type.Features Snagless.Features 1 x RJ-45 Male Network connector, permitting you to establish a connection with a network device