Standard Computer Cables

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..it is used for Networking and suitable for high-performance Ethernet connections Ensuring reliable and high-speed data transfer in network setups for various devices..The cable length is 75 feet..Has the following connections: Connectors: RJ45 (male) on both ends Pins: 8 pins in each RJ45 connector.27 AWG cable with a low smoke zero halogen (LSZH) jacket, featuring pure bare copper conductors and a black exterior.Compatible with the following devices: Computers , Printers , Routers.Comes with a Lifetime warranty.

The C2G 27152 7' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 7'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

C2G ® CAT6 UTP Patch cable in blue color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 25' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 25' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in blue color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.67 lb.Comes with lifetime warranty.C2G ® 27145 25' Blue CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

The 10ft (3m) USB-C to C 2.0 Male to Male Cable is the ultimate solution for connecting your USB-C enabled devices for fast charging and data transfer. With a 5A charging output and data transfer speeds up to 480 Mbps, this cable ensures your devices stay powered and synced effortlessly. Its reversible USB-C connectors make it easy to plug in, while the durable PVC jacket and stranded copper conductors provide reliable performance. Compatible with Apple® and Microsoft® Surface® devices, this high-quality cable offers versatility and longevity with a lifetime warranty..The USB-C to C 2.0 Male to Male Cable is ideal for connecting devices like laptops, tablets, and smartphones for charging and data transfer. It is perfect for use with Apple®, Microsoft® Surface®, and other USB-C enabled devices..This cable has a length of 10 feet (3 meters), providing ample reach for connecting devices in various settings..It features USB-C Male connectors on both ends, providing a stable connection for charging and data transfer. The connectors are symmetrical for a reversible, hassle-free plug-in..The cable is built with 30 AWG wire gauge and is made of PVC jacket material. It uses stranded copper for conductors, offering durability and effective data transmission. The true color is black..While this cable is primarily for charging and data transfer, it also supports video input and output via USB-C, allowing for media sharing across devices..Connector 1: USB-C Male Connector 2: USB-C Male.The cable supports data transfer speeds of up to 480 Mbps, allowing for quick and efficient file sharing between devices..Compatible with Apple® iPad Pro®, MacBook®, MacBook Air®, and MacBook Pro®. It also works with the Microsoft® Surface® Book 2, Surface Go, and other USB-C enabled devices..This cable complies with the USB 2.0 standard and is RoHS compliant, ensuring it meets environmental and safety regulations..The product comes with a lifetime warranty, ensuring long-term reliability and support.

Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications..Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 22011 15' Cat5e 350MHz snagless unshielded blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.34 lbs..Comes with lifetime warranty.Category 5e for Network Device.6" LP4 to LP4 SATA power Y cable adapter features powers an IDE (LP4 connected) drive using a SATA power connector from the computer power supply.

C2G® 10' Cat6 STP network patch cable in blue color has RJ-45 male/male connectors on first and second end. Cable will handle bandwidth-intensive applications such as datA/Voice and minimizes both impedance and structural return loss..Blue.Cable type: Category 6.Cable length: 10'.Material: Hood: Molded PVC, Housing: Polycarbonate, Jacket: PVC, Shielding: Copper, aluminum, Insulation: FM-PE.Connector details: 1 x RJ-45 male network on first and second end.Connector plating: 50 micron gold plated, Shell: Nickel plated for shielding, Technology: Unshielded twisted pair (UTP).Conductor: Copper, Conductor size: 26 AWG (7/0.16) (bare copper), Wiring scheme: 568B.Features: Molded, stranded, snagless, minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Rating: 75 deg C.Dimensions: 15.1(H) x 11.6(W) x 38.2(D).Protect from EMI/RFI interference; connect network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking applications in high noise environments.Certification and Standards: Meets all ANSI/TIA 568 C.2 Cat6, UL94V-0.Weight: 0.322 lbs..Warranty: Lifetime limited.C2G® 10' Cat6 STP network patch cable in blue color features RJ-45 male/male connectors and saves high-speed network from noise and electromagnetic interference.

Don't sacrifice convenience when determining where to place your hardware. A C2G Cables to Go DB9 extension cable can give you the flexibility to extend a computer peripheral wherever you need it. Each extension cable comes fully shielded to prevent unwanted EMI/RFI interference, and the fully molded cable design delivers excellent strain relief. Connector thumbscrews provide a quick and easy connection every time. All lines are wired straight through..DB9 extension cable can give you the flexibility to extend a computer peripheral wherever you need it.Cable length: 50'.Contains DB9 male to DB9 female connectors.Extend an existing DB9 cable up to 100'.Put peripherals in the most convenient place.Jacket is made of PVC

The C2G® 7' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.21 lbs..Comes with lifetime warranty

Active converter cable saves upgrade cost by connecting your DVI computer to a VGA monitor or projector. For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL)..Snagless design protects clips when plugging and unplugging.Standard RJ45 connectors and unshielded twisted pair wires.Color: Black.PoE (Power Over Ethernet).Warranty Type: Lifetime.Cable Length: 3 ft.Wire Gauge: 24 AWG.RJ-45 Male to RJ-45 Male

The C2G ® 3' blue Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..This patch cable is perfect for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications.Designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk; comes in blue.50 cables per pack.Supports 10 Gigabit Ethernet networks up to 180' for fast data transmission and maximum performance and 1 Gigabit Ethernet networks up to 328'.Snagless connector design for high-density environments and protecting the RJ45 connector's lock.Meets or exceeds the EIA/TIA TSB-40 CAT-6 standards.Cable length is 10'

Just plug-and-play for keyboards, mice, modems, printers, and other USB peripherals. This cable provides a transfer rate up to 480 Mbps depending upon the peripheral's USB version, and easily attaches to any USB device. Foil and braid shielding reduces EMI/RFI interference and twisted pair construction helps reduce crosstalk thus ensuring high speed, error-free data transfer..Black USB A Male/A Male cable is compatible to connect with various devices.6.56' length for convenient use.Connects USB A to USB A.Compatible with USB A-equipped devices.Meets or exceeds RoHS, Plug and Play, and USB / USB 2.0 standards.Lifetime manufacturer limited warranty.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Just plug-and-play for keyboards, mice, modems, printers, and other USB peripherals. This cable provides a transfer rate up to 480 Mbps depending upon the peripheral's USB version, and easily attaches to any USB device. Foil and braid shielding reduces EMI/RFI interference and twisted pair construction helps reduce crosstalk thus ensuring high speed, error-free data transfer. Meets all UL requirements for communication cabling, and is compatible with USB 1.0, 1.1, and 2.0..Black USB A Male/B Male cable is compatible to connect with various devices.6.56' length for convenient use.Connects USB B to USB A.Compatible with USB B-equipped devices.Meets or exceeds UL and USB / USB 2.0 standards.Lifetime manufacturer limited warranty.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

C2G® Universal power cord is 10' long and replaces overused and unreliable power cable. Fully-molded design cord comes in black color for an attractive look. 18 AWG SVT Cord has IEC-320 C13 female connector on the first end and NEMA 5-15P male connector on the second end for providing uninterrupting connection. The female connector plugs into the device directly and the male connector plugs into a standard outlet offers efficient connection. Cord of 6.3mm OD has 125 VAC input voltage and 10 A input current. Designed to use with three pins shroud power connector. Compatible to connect with PCs, monitors, scanners and printers..Power cord is designed for supporting computers, monitors, scanners, printers and devices that use a 3-pin shroud power connector.A convenient length of 10' for ease of installation.Features IEC 320 C13 first end and NEMA 5 15R second end for reliable connection.Well suited to use with computers, monitors, scanners, printers and devices that use a 3-pin shroud power connector.Comes in black color for a new look.STV type cable for reliable connectivity.Operates feasibly with input voltage of 125 V and current of 10 A.Comes with wire of size 18 AWG.Comes with outer diameter of 6.3 +/- 0.1 mm.DVW tested at 1500VAC for 1 second.Operates feasibly at 60 deg C and stores comfortably at -20 - 60 deg C.Rated with resistance 20 deg C < 22.4 ohms/km at 25 deg C < 22.8 ohms/km and features 0.33 mm insulation with 2 +or-0.1 mm diameter.Male connector plugs into a standard outlet while female connector plugs directly into the device.Meets UL-E135710, E115330, TAA and RoHS standards.Weighs about 0.547 lbs..Comes with lifetime warranty.C2G® 3134 10' Black standard power cord with NEMA 5-15P and IEC320C13 connectivity ideal for power cable replacement. 18 AWG Heavy duty cord provides high power connection.

The C2G® 3' male to male category 5e gray snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Snagless patch cable resists breakage.Cable length: 3'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 24 AWG stranded bare copper, Construction: Polycarbonate.Certifications and standards: Meets RoHS and Cat5e TIA/EIA standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.09 lbs..Comes with lifetime warranty.StarTech.com® HDDVIFM8IN 8" HDMI to DVI-D Cable adapter effectively routes video signal between DVI-D and HDMI devices. Supports 1920 x 1200 resolution video signal.

C2G ® Universal power cord is 25' long and replaces overused and unreliable power cable. Fully-molded design cord comes in black color for an attractive look. 18 AWG SVT Cord has IEC-320 C13 female connector on the first end and NEMA 5-15P male connector on the second end for providing uninterrupting connection. The female connector plugs into the device directly and the male connector plugs into a standard outlet offers efficient connection. Cord of 6.3mm OD has 125 VAC input voltage and 10 A input current. Designed to use with three pins shroud power connector. Compatible to connect with PCs, monitors, scanners and printers. Meets UL certification..Power cord is used for supporting computers, monitors, scanners, printers and devices that use a 3-pin shroud power connector.A convenient length of 25' for ease of installation.Features IEC 320 C13 first end and NEMA 5 15R second end for reliable connection.Well suited to use with computers, monitors, scanners, printers and devices that use a 3-pin shroud power connector.Comes in black color for a new look.STV type cable for reliable connectivity.Operates feasibly with input voltage of 125 V and current of 10 A.Comes with wire of size 18 AWG.Comes with outer diameter of 6.3 +/- 0.1 mm.DVW tested at 1500VAC for 1 second.Operates feasibly at 60 deg C and stores comfortably at -20 - 60 deg C.Rated with resistance 20 deg C < 22.4 ohms/km at 25 deg C < 22.8 ohms/km and features 0.33 mm insulation with 2 +or-0.1 mm diameter.Male connector plugs into a standard outlet while female connector plugs directly into the device.Meets UL-E135710, E115330, TAA and RoHS standards.Weighs about 1.19 lbs..Comes with lifetime warranty.C2G ® 14719 25' Black standard power cord with NEMA 5-15P and IEC320C13 connectivity ideal for power cable replacement. 18 AWG Heavy duty cord provides reliable power connection.