StarTech 19-Inch Racks

15U 19" Server Rack Cabinet - 4 Post Adjustable Depth (6-32") Locking Knock Down Network/Computer Equipment Enclosure - Mobile w/Glass Door & Casters - HP ProLiant ThinkServer (RK1536BKF).15U 4-POST CABINET: Server rack cabinet features all metal 4 post design with 15U, adjustable depth, casters & levelling feet, removable locking sides/doors & top/bottom/front/rear cable access.MOBILITY & STABILITY: Mobile computer rack features a 1768 lb. capacity, solid metal floor which can be used as a shelf, casters & levelling feet & rear and top mesh w/ vented lockable glass front door.SERVER READY: EIA/ECA 310-E standard server rack cabinet with internal depth of 39" and an adjustable mounting depth of 6-32" in a compact 39" tall design.STRAIGHT FORWARD ASSEMBLY: Knock down network data equipment enclosure comes in an easy ship flat pack, with clear assembly instructions & supporting videos; includes tools needed for assembly.THE STARTECH.COM ADVANTAGE: StarTech.com offers a lifetime warranty and free lifetime technical support on this cabinet, and has been the choice of IT professionals and businesses for over 30 years.Knock Down Server Rack | EIA-310 | 4 Post | Weight Cap. 1768 lb. | Lockable

DIN-rail equipment in a 19-inch server rack/cabinet or wall plate simple, Without wasting space due to special bracket requirements for each piece of equipment..Black.Length: 19".Frame type: Steel.Dimensions: 19"(H) x 14.1"(W) x 3 1/2"(D).Device supported: Rack.U Height: 2U.Additional information: Maximum mounting depth: 222.25 mm.Fits all standard 19" racks, includes three types of DIN rails: top-hat, miniature top-hat, and G-type.Meets ANSI/EIA RS-310-D standards.Occupies 2U of rack space, adjustable depth.Constructed from solid cold press steel.Application: Two ADJDINKIT's can be used in the same U height, facing each other and mounted on both front and back rails.Compatibility: Standard 19" rack.Certifications and standards: EIA-310D, UL, CE.Green compliance certificate/authority: RoHS.Includes 1 x rack mount din rail frame, 1 x adjustable din rail mount with top hat din rail, 1 x mini top hat DIN rail, 1 x G-type DIN rail, 2 x carriage bolt, 2 x wing nut, 4 x plastic washer, 2 x M5 screw, 2 x M5 nut, 1 x installation guide.Warranty: Lifetime.Rail Kit fits all standard 19" racks and includes three types of DIN rails top-hat, miniature top-hat, and G-type.

The StarTech black deep sliding server cabinet shelf is sturdy and strong. It includes all the tools required for installation and offers additional storage space for mission-critical hardware. This shelf features rugged steel construction..Server cabinet has a sturdy sliding shelf for easy peripheral and equipment access in server rack or cabinet.1.8"H x 17.5"W x 22"D external.Sturdy black cold-rolled steel construction for rugged operation.Weight capacity: 55.3 lbs..Compatible with 7236 cabinet.Used with all 19" wide server racks and cabinets.When inverted, shelf functions as a sliding shelf or a 1U drawer.Provides additional sliding storage space for mission-critical hardware.Includes 1U sliding shelf, two front and rear mounts, two rails, and hardware pack including screws, nuts, and bolts.Meets RoHS and Green Compliance.Weight: 12.6 lbs..Comes with lifetime warranty.The StarTech black deep sliding server cabinet shelf is compatible with all 19" wide server racks and cabinets with a 22" depth.

The StarTech® WALLSHELF4U wall-mount server rack in black, comes with built-in-shelf for easy customization. It provides 4U of space for mounting your servers or A/V equipment to a wall. This solid steel accessory has 10 - 32 tapped rails for hassle-free setup..Wall-mount server rack with shelf provides 4U of space for mounting your servers or A/V equipment to a wall.Dimensions: 10 1/2"H x 19"W x 18"D.Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 75.2 lbs..Customize your setup with a built-in shelf that can be positioned at either the top or the bottom of the rack.Save space in your office or server room by mounting IT or AV equipment to the wall.Hassle-free setup with 10-32 tapped rails, enabling you to mount your equipment directly to the rail without cage nuts.Tie-off points for cable management.Rear opening for cable access.Includes 1 x back plate, 1 x right bracket, 1 x left bracket, 1 x shelf bracket, 2 x adjustable rails, 16 x 10-32 x 3/8 screws, 12 x 10-32 screws.RoHS compliant.Comes with lifetime warranty

The StarTech RKPNLTL2U black blank panel offers hassle-free installation with a tool-less design. It has a solid design that helps to guide airflow down the back of the rack, rather than passing between occupied spaces. This blank panel offers improved airflow that helps to ensure rack-mounted equipment is running at an optimal temperature..Dimensions: 3.5"H x 19"W x 0.6"D.Comes in black aluminum and plastic enclosure for durability.Mounting method: Front mount.Rack height: 2U.Offers hassle-free installation with tool-less design.2U panel mounts to any standard 19" 2 or 4-post rack.Helps to fill in unused gaps between equipment in server racks, cabinets.Keeps rack-mounted equipment running at an optimal temperature.Meets EIA RS310-D industry standards.Includes 2U tool-less rack panel.Meets RoHS compliant certifications or standards.Weight: 19.2 oz..2 year warranty.1 Pack.The StarTech black blank panel with tool-less installation helps to guide the airflow along the back of the rack instead of passing through your equipment.

The StarTech.com® WALLSHELF8U wall mount server rack cabinet comes with built-in shelf that provides 8U of space for mounting. This mount features a dual-position 12" shelf depending on mount rack, which can be positioned at either the top or the bottom. The shelf gives you a stable surface for placing equipment and storing your tools..Server rack cabinet is used for enclosure of server.Dimensions: 17.5"H x 19"W x 18"L, 8U height, 17.8"W x 18"D (rack).Comes in black color with steel construction.Form factor: Wall mountable.Frame type: Open frame.Rack size: 19".Customize your setup with a built-in shelf that can be positioned at either the top or the bottom of the rack.Save space in your office or server room by mounting IT or AV equipment to the wall.Hassle-free setup with 10-32 tapped rails, enabling you to mount your equipment directly to the rail without cage nuts.8U wall mount design

StarTech.com® 2U Horizontal finger duct rack cable management panel in black color mounts to a standard 19" 2 or 4-post rack to organize horizontal cabling, through a covered cable duct. Features a removable top cover that holds it easy to add or remove bundled cables quickly. Helps to increase the longevity of server and networking equipment interfaces by providing cable strain relief. Includes one horizontal cable duct, four M5x15 screws, M5 cage nuts, M6x15 screws and M6 cage nuts..Cable management panel is perfect to organize horizontal cabling, through a covered cable duct.Comes in black color for new look and is made of sturdy steel for durability.Measures 3.5"H x 19"W x 3.1"D.Features front mounting for easy installation.Utilizes 1U rack height for designating the usable space.Includes removable top cover that helps for easy adding or removal of bundled cables quickly.Provides a series of fingers on either side, as well as pass-through holes at the back to helps to route cables.Offers better solution for your server room or wiring closet.Used to mount standard 19" 2 or 4-post server racks.Use the fingers on either side or the rear pass - through holes to detache and route cables easily.Maximize the longevity of server and networking equipment interfaces by offering cable strain relief.Contains horizontal cable duct, 4 x M5x15 screws, 4 x M5 cage nuts, 4 - M6x15 screws, 4 x M6 cage nuts fro reliable operation.Meets RoHS Compliant and is CE listed.Weighs up to 33.7 oz.Comes with 2 years warranty.StarTech.com® 2U Horizontal finger duct rack cable management panel in black color is made of high-quality steel for durability. Comes with 2 sets of rack screws.

StarTech.com 1U Horizontal cable management panel has a removable top cover that allows the user to add and remove the bundled cables easily. Panel comes with a series of fingers and passes through holes required for routing cables..Cable management panel.Help you organize horizontal cabling, through a covered cable duct.Hardware: 1U height, mounting options: Front mount (front only).Physical characteristics: Black colored, enclosure type: Steel.Compatibility: Mounts to standard 19" 2 or 4-post server racks.Finger duct plus rear pass-through holes for routing cables.Add or remove bundled cables quickly, with a removable top cover.1U rack design, sturdy steel construction.Separate and route cables easily, using the fingers on either side or the rear pass-through holes.Increase the longevity of your server and networking equipment interfaces by providing cable strain relief.Organize cables in your server rack or cabinet with a horizontal, covered cable duct.Dimensions: 19"H x 1.9"W x 2.4"D.Includes: 1 x horizontal cable duct, 2 x M5x15 screws, 2 x M5 cage nuts, 2 x M6x15 screws, 2 x M6 cage nuts.Certifications and standards: EIA RS310-D, CE industry standards.Weight: 23.7 oz..Warranty: 2 years.StarTech.com 1U Horizontal cable management panel has a sturdy steel construction for enhanced durability and can be easily mounted on standard 19", 2 or 4 post server racks.

This panel for 19-inch server racks and cabinets is designed to EIA RS-310-C specifications and fits all 19-inch standard server racks and cabinets..Dimensions 1.7"(H) x 19"(W) x 0.6"(L).Frame type Steel.Black.Industry standards EIA RS310-C.SPCC Cold Rolled Steal, 1.2 mm thick.Powder black coloring to match most rack and cabinets.Filling in the spaces when no other rack mounted equipment is needed.Low cost individual units mean you can buy exactly the right number for your rack need.Ideal for improving airflow within the rack by covering the unused spaces.Rack unit 1U height.Includes 1U blanking plate, package of M6 screws and cage nuts (2 sets).Certifications and standards RoHs.Warranty Lifetime limited.Startech.Com® BLANKB1 Rack Blank Panel is ideal for improving airflow within the rack by covering the unused spaces.

This panel for 19-inch server racks and cabinets is designed to EIA RS-310-C specifications and fits all 19-inch standard server racks and cabinets..Dimensions 3 1 2"(H) x 19"(W) x 1 2"(L).Frame type Steel.Black.Industry standards EIA RS310-C.SPCC Cold Rolled Steal, 1.2 mm thick.Powder black coloring to match most rack and cabinets.Filling in the spaces when no other rack mounted equipment is needed.Low cost individual units mean you can buy exactly the right number for your rack need.Ideal for improving airflow within the rack by covering the unused spaces.Rack unit 2U height.Includes 2U blanking plate, package of M6 screws and cage nuts (4 sets).Certifications and standards RoHs.Warranty 2 years limited.Startech.Com® BLANKB2 Rack Blank Panel is ideal for improving airflow within the rack by covering the unused spaces.