Steel Racks
131 results
This IRIS USA dish rack sits on a plastic drip tray that catches water as it falls off the dishes. The draining spout on the bottom of the tray lets you drain water right into your sink. Spout rotates 360° so it can reach the sink no matter which side you place the rack on, letting you place it in the spot that best suits your countertop. The rust-resistant stainless steel frame means this dish rack is built to last and is easy to clean. Compact design is great for fitting a lot of dishes in a small space. Rubber feet on legs keep rack from sliding when loaded with dishes. Drain spout can be removed making cleaning quick and easy..Bottom tray and 360-degree-adjustable drain spout catch water and drain it back into your sink..Sturdy stainless steel construction holds your plates, dishes, cups, pans and more..Stainless steel frame is rust resistant and easy to clean. Drain spout also removeable for easy cleaning..Rubber feet prevent dish rack from sliding around keeping your dishes and you safe..Dimensions: 16.90"L x 9.05"W x 5.10"H
The Tripp Lite SmartRack® SRWO8U22MD 8U/12U/22U expandable very low-profile patch-depth open rack frame has heavy-duty steel construction with a durable black powder-coated finish. The cabinet has a maximum load capacity of 150 lb. Easy to assemble and suitable for installing patch panels and other shallow networking equipment in secure IT areas with limited floor space..Expandable very low-profile patch-depth open rack frame is suitable for installing patch panels and other shallow networking equipment.Dimensions: 45.22 (8U), 63 (12U), 107.45 (22U) cm H x 51.08 cm W x 30.48 cm D, 19"D (rack), Maximum device depth: 30.48 cm.Black steel.Form factor: Wall mountable.Maximum weight capacity: 150 lbs..Rack height (U spaces): 8.Houses EIA-standard 19" rack equipment up to 11 1/2" deep.Open-frame design in 3 configurations: Assembles in 8U, 12U or 22U to meet current needs, allows easy access for organizing, servicing and cabling.Made from heavy-duty steel with a black powder-coated finish, easy to assemble w/included hardware, vertical mounting rails with threaded 12-24 holes.Includes rack frame, 24x12-24 mounting screws, 16xM5 cap screws, 8xM6x12 head screws, 2xshort/long rails, 2xmounting rail tie plates, owner's manual.Meets Green compliant, RoHS, EIA-310-D, IEC 60297-3-100 standards.Weight: 6.71 Kg, Weight varies depending on configuration 8U = 10.24lbs, 12U = 11.25lbs, 22U: 14.08 lbs..Comes with 5 year limited warranty
The drying rack includes 2 adjustable side wings, one lower section for flat drying, two sets of holders to dry shoes, a T bar for hang-drying, and a side clip to hang smaller items. When not in use all tiers fold down into a compact size that can be stored away. Providing more than 50 feet of drying space and 30 lb. weight capacity, this is a practical and versatile solution for drying in laundry rooms, bathrooms, bedrooms, or balconies.This clothes drying rack is made of high quality stainless steel and durable plastic with strong load bearing capacity and stability..Includes 2 adjustable side wings, one lower section for flat drying, two sets of holders to dry shoes, a T bar for hang-drying, and a side clip to hang smaller items.50 feet of drying space and 30 lb. weight capacity.Easy, 30-minute Assembly.Fully assembled rack measures 78.25" H x 54.75" W x 20" deep.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.This multi tier stainless steel laundry drying stand provides large capacity drying while its ability to fold down ensures it works within smaller spaces.
This StarTech 1U Universal fit mount shelf is designed to fit any 19" wide rack..19" 1U.Heavy duty steel construction.Supports a total weight of 33lbs/15kg.Mounting screws included.Mounting options Front mount (front only).Material Steel.Very compact form factor makes it ideal for any wall mount server rack, and even network switching racks.Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.Durable steel construction holds up to even the harshest industrial environments.Supply additional storage space for mission critical hardware and non-rack mount equipment.Rack unit 1U height.Includes 1U fixed rack shelf, 4 x M6 screws, 4 x M6 cage nuts.Certifications and standards CE, RoHs, UL.Warranty 3 years limited.Startech.Com® CABSHELF1U Universal Fixed Server Rack Cabinet Shelf has very compact form factor that makes it ideal for any wall-mount server rack, and even network switching racks.
Heavy-gauge steel with rustproof, vinyl-coated shelves.Includes wire hat shelf.Dimensions: 60"H x 48"W x 23"D.Accepts slotted or open hook hangers (sold separately)..Two perimeter rods allows for double hanging capacity of up to 40 hangers.Center rod accommodates up to 20 hangers.Predrilled for optional casters MGNCST4 (sold separately)..Ready to assemble
Trademark 5' Overdoor storage basket rack measuring 5' x 19" x 5" can be mounted to a wall/hung over the inside any door. Rack is ideal for storing craft items to cleaning products..Dimensions: 5'(H) x 19"(W) x 5"(D).Can be mounted to wall or hung over the inside of any door.Will not harm the finish of wall or door.Great for storage solution.6 shelves hold everything from canned foods to gifts wrap, craft items to cleaning products.Trademark 5' Overdoor storage basket rack features 6 shelves to accommodate everything from canned foods to gifts wrap.
The Household Essentials Collapsible Portable Indoor Tripod Clothes Drying Rack is the perfect environmentally friendly alternative for drying laundry. This thoughtfully designed indoor folding tripod hanging rack is designed to make air drying your clothes a breeze. Crafted with a sturdy steel frame and arms, this rack provides ample strength and stability to hold even the heaviest of items like wet towels and jeans. Its hanger slots can accommodate hanger placement through and atop the provided holes, ensuring your clothes dry wrinkle-free and without any marks. Measuring 64.5 inches H x 26 inches diameter, this drying rack provides ample space for drying a full load of laundry. When not in use, it folds and disassembles easily to store in a closet or small space. Its silver and blue color scheme adds a touch of modern style to your space, while its clever design makes it easy to use and maintain..This thoughtfully crafted indoor folding tripod hanging rack is an environmentally friendly alternative for drying laundry.Folds and disassembles easily to store when not in use, or use in guest room as a garment rack for visitors.Steel frame and cleverly designed arms provide ample strength and stability.Hangers can fit either through or on top of hanger slots for wrinkle-free air drying.Drying rack measures 64.5 inches H x 26 inches diameter.Collapsible Portable Indoor Tripod Clothes Drying Rack for Hanging Laundry, Silver and Blue
The AdirOffice Vertical File Rolling Stand with 12 Brackets 613 provides hanging blueprint storage that's convenient and easy to get to. The 12 pivot brackets swing out wide so it's a cinch to see and access your blueprints, plan drawings, maps, or other large documents. Just clamp your files into a hanging paper clamp and snap it onto 1 of the brackets. The brackets accommodate any size clamp, so you can fit documents in a variety of sizes onto this mobile blueprint stand at the same time. (Clamps are sold separately) This mobile blueprint rack is adjustable to fit even your largest files: the length is adjustable from 28 in. to 46 in., the width is 27 in., and the height is adjustable from 46 in. to 66 in. Made of solid steel, with a 240 lbs. W capacity (20 lbs. per bracket), this hanging file rack can hold a lot of documents. It's easy to move your documents from room to room on this mobile plan rack, which has four 3 in. swivel wheels. The front 2 lock to hold it stable when your get it to its destination. This hanging file rack with wheels comes with a 1 year warranty..Accommodates large files up to a 27-inch width with its adjustable length from 28.5 to 46.5 inches and adjustable height from 46 to 66 inches to effectively store smaller and larger files with ease.Blueprint hanging file storage boasts a 240-pound weight capacity and is able to hold up to 1200 documents at the same time.Large file rack features 12 pivoting brackets that swing out wide, allowing you to see and retrieve your blueprints, plan drawings, maps and other large-format documents.The bottom is outfitted with four, 3-inch swivel wheels to facilitate easy movement from one location to the next and the front two casters can be locked to keep the unit securely in place when you get to your destination.Outer dimensions: 28.5”L x 27”W x 46”H.Easy to assemble and adjust.Can accommodate various size hanging clamps.Sturdy file rack weighs 36.1 pounds.1 year manufacturer warranty.Gray finish.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Blueprint, Maps, Filing and Storage
Thoughtfully designed with a free-standing frame, this shoe rack can hold up to 9 pairs of shoes, keeping them off the floor and neatly organized. Unlike traditional shoe racks that hold shoes horizontally, this rack holds shoes vertically, taking up less room in your closet. Its low-to-the-ground design ensures that shoes won't get in the way of hanging garments, and its black finish adds a touch of elegance to an otherwise mundane space. Made from 100% steel, this shoe rack is durable and built to last. Measuring 22 inches W x 16 inches D x 9.25 inches H, this shoe rack is the perfect size for closet of any size. Upgrade your shoe storage with the Household Essentials 9-Pair Metal Wire Shoe Rack and enjoy a tidy and clutter-free closet..This thoughtfully designed metal wire shoe rack showcases a free-standing frame and holds up to 9 pairs of shoes.Rather than holding shoes horizontally, this shoe rack holds shoes vertically, thus taking up less room in your closet.Low-to-the-ground design prevents shoes of getting in the way of hanging garments.Made from 100% steel.Shoe rack measures 22 inches W x 16 inches D x 9.25 inches H.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.The 9-Pair Metal Wire Shoe Rack is the perfect solution for organizing your shoe collection.
The Tripp Lite SmartRack flat-pack low-profile switch-depth open frame rack with 200 lbs load capacity, secures and organizes 12U of 19" rack equipment up to 18" deep in locations with limited floor space. The pivoting, 2-post open-frame design provides convenient access for installing, configuring and servicing equipment and cabling from any direction. It is suitable for use in network closets, retail outlets, warehouses, offices, classrooms and other locations. Heavy-duty rack comes with assembly and equipment-mounting hardware for easy installation..Has steel construction for durability.Form factor: Wall mountable.Comes in black powder coat color.Dimensions: 24.8"(H) x 20.1"(W) x 18.2"(D), 12U(H) x 19"(W) x 18"(D) rack.Device depth: 45.72 cm max.Maximum load capacity: 200 lbs..Provides easy access to equipment and cabling.Simple to assemble and mount, with included assembly and equipment-mounting hardware.Ideal for network wiring closets, back offices and other secure areas with limited floor space where there is a requirement of locked enclosure.Wall mounting holes have 16" space in between for standard wall stud placement.Has rails that support threaded-hole equipment mounting and rack spaces come numbered for easy reference.Includes 12-24 equipment mounting screws, M5 button-head cap screws, M6 x 12 Phillips-head screws, vertical mounting rails and owner's manual.Meets Tested to NOM, EIA-310-D, IEC 60297-3-100 and RoHS certifications or standards.Weight: 6.48 kg.Comes with 5 years limited warranty
Household Essentials Gullwing air dryer features corrosion free stainless drying rods and an aluminum frame for durability. Dryer allows clothes to hang dry or lie flat and even will allow your sneakers to be sparkling..Its unique wing-like design allows clothes to hang dry or lie flat, so practically everything can find a place.White.Material: Stainless steel.Dimensions: 39"(H) x 61.6"(W) x 25.5"(D).25 stainless steel rods provide 44' of drying space.Hang dry or lay clothes flat.Shoehorns on bottom help shoes keep their shape during drying.Foldable for easy storage.Household Essentials Gullwing air dryer has unique wing-like design and provides an enormous 44' of drying space.
Quartet Garment rack featuring 1 shelf measures 36" and has perforations on shelves for aeration to garments. Rack is made of powder coated steel for strength that can be fastened to wall with ease and has evenly indexed hanger rail..Mounting style: Screws to solid surface (Mounting hardware included).6"H x 36"W x 14 1/2"D.Custom molded hanger rail is indexed to hold 4 to 8 hangers per foot, allowing ample room for heavy garments.Features a perforated shelf to provide ventilation for damp garments.Ready to assemble.Black steel shelf with flat, perforated top includes a rail for hanging garments.Holds up to 18 hangers (not included).Shelf mounts securely to any wall.Black powder-coat finish is modern and discreet.100% Satisfaction Guaranteed.Quartet Garment rack in black color is free standing that features a single shelf holds four hangers per foot and is an ideal organizer at homes/workplace.
The Tripp Lite SmartRack expandable low-profile open-frame rack with 150 lbs. load capacity, secures and organizes 19U of 19" rack equipment up to 23.5" deep in locations with limited floor space. The pivoting, 2-post open-frame design provides convenient access for installing, configuring and servicing equipment and cabling from any direction. Heavy-duty steel with black powder-coated finish provides durability. It is suitable for setting up UPS systems, battery packs, network switches and patch panels in secure IT areas. The open-frame design helps to configure this rack to 8U, 12U or 22U to meet current needs. Rack comes with assembly and equipment-mounting hardware for easy installation..Rack height: 8U, 12U, 22U.Weight capacity: 150 lbs..Dimensions: 17.8" (8U), 24.8" (12U), 42.3" (22U)H x 20.11"W x 24"D.Device depth: 23.5".Perfect for installing UPS systems, battery packs, network switches and patch panels in secure IT areas with limited floor space.Expands to add equipment later without buying a bigger rack.Offers easy access for organizing, installing and servicing equipment and cabling.Heavy-duty steel construction with a black powder-coated finish offers added durability.Easy to assemble with included hardware.Vertical mounting rails with threaded 12-24 holes.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Contains 24 x 12-24 mounting screws, 16 x M5 button-head cap screws, eight M6 x 12 Phillips-head screws, two short vertical mounting rails.Meets EIA-310-D, IEC 60297-3-100, RoHS certifications and standards.Weight: 8U = 13.03 lbs., 12U = 14.04 lbs., 22U = 16.87 lbs..Comes with 5 years limited warranty
Affix this sleek, functional rack over the door of a bathroom or laundry room as a space saving, energy conscious drying alternative; Simply expand the metal drying bars when needed, and clip back into position when not in use; Ideal for delicate clothing items or towels.This cleverly designed drying rack showcases solid metal construction with 2 mounting hooks and 5 functional bars.Expand the attached drying bars when in use, and swiftly collapse to save valuable space in a bathroom or laundry room.Streamline your laundry routine with this thoughtfully designed over the door drying rack.Made from 100% metal.Rack measures 22 inches L x 2 inches W x 21 inches H.Metal Expandable Over the Door Drying Rack, Silver
The Tripp Lite SRSHELF2P1UTM Rack shelf in black, is a fixed shelf with 1U cantilever mount. This shelf made of cold-rolled steel supports up to 30 lbs load. The rack-mountable shelf is suitable for 4 post rack tool less mounting..Rack shelf.Dimensions: 1.8"H x 19"W x 12"D, 1U (rack height), 19"W (rack).Black cold-rolled steel.Compatible with 4 post rack tooless mounting.Load capacity: 30 lbs..Form factor: Rack-mountable.RoHS compliant.Weight: 3.5 lbs..Comes with 5 year limited warranty.Black rack shelf is designed for 4 post rack tool less mounting.
Store boots in less space and help them keep their shape with HOUSEHOLD ESSENTIALS 3-Tier Carousel Boot Tree Shoe Rack. This innovative boot storage rack uses a rotating carousel design to keep up to 12 pairs of boots easily accessible. It stores the boot upside down, so there is less creasing and strain on the calf and leg of boots. Each boot tier has an inverted loop that is 16 inches tall: boots fit over the metal frame loop for secure and tidy storage. Boots can be stored with toes pointed inward or outward--whichever way best fits the style of boot and your space! This Boot Tree Shoe Rack also includes a basic shoe storage rack tier with space for 6 pairs of shoes, heels, or ankle boots. All tiers can be re-positioned along the center pole to accommodate varied heights of footwear. And, as always, the carousel tiers spin easily and comfortably. Pair this smart way to store shoes and boots with the 58106 Cedar Fresh Shoe Refresh Sachets (sold separately) that attach to the ends of the carousel loops for a bit of extra padding that both freshens shoes, deters odor, and helps protect shoe shape. This boot tree has a weighted, sand-filled base and a handle topper to get it into position more comfortably. Without shoes, the tree is 12 inches in diameter and 52.75 inches high..3-tier boot and shoe storage rack with rotating carousels.Holds boots upside to protect their shape.16-inch long metal boot hooks fit ankle, calf, and knee-high boots.24 storage hooks in all: 12 long boot hooks (2 tiers), 12 short shoe hooks (1 tier).52.75 inches high, 12 inches wide, and 12 inches deep; includes 2 boot tiers, 1 shoe tier, center post, weighted base, and top handle.Re-positionable spinning carousel tiers.Tipping-resistant weighted base.Steel frame with satin silver finish.Handle topper.No-tool assembly.3-tier carousel boot storage rack holds boots upside down to protect against cracks and creases.
Tripp Lite Rack shelf has front to rear rail distances between 28” / 71cm minimum and 46 “/ 117cm maximum. Rack shelf in black color is made of cold rolled steel material and has dimensions of 30.8”L x 20.5”W x 3”H..Material: Cold-rolled steel (CRS).Weight capacity: 50 lbs..Sliding shelf mountable rack accessory.Designed for 4 post rack mounting.Extendable shelf accommodates tower units, monitors, and other equipment.Required mounting hardware included.Certifications: RoHS.Weight: 18.6 lbs..Warranty: 5 years limited.Tripp Lite Rack shelf supports up to 50lbs and is an extendible shelf which can accommodate tower units, monitors and other equipment.
Tripp Lite Smart rack shelf accommodates monitors and other equipment. Shelf features cold rolled steel with black finish and 18" of shelf depth..2U.Black.Material: Cold-rolled steel.Dimensions: 3.5"(H) x 19"(W) x 18"(D).Maximum weight capacity: 27 kg.Rack height: 2U.2 or 4 post rack compatible.Cantilever shelf supports monitors and other equipment.Use two shelves back to back to create a deep fixed shelf in 2POST racks.Includes shelf and mounting hardware.Weight: 5 lbs..Warranty: 5 years limited.Compliant standards: IEEE 802.1ab (LLDP), IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP).Tripp Lite Smart rack shelf measuring 3 1/2" x 19" x 18" is designed for 2 or 4 post rack mounting and withstands 60 lb of weight capacity.
A well-organized home makes life more enjoyable, especially in small spaces. When everything is in its place, routines run smoothly, and your day starts better. Whitmor's Over-the-Fridge Shelf is an affordable and easy storage solution with an open, airy feel to make the most out of your available living space. Perfect for a dorm, rec room, small break room, studio apartment, or kitchenette, this stylish and highly functional shelving unit is designed to stand around and over a standard-size mini-fridge to maximize the unused vertical space above it. The sturdy frame and strong wire shelving are made of heavy-duty steel with a durable black epoxy coating. Each adjustable shelf supports up to 105 pounds. The top reinforced shelf will hold a small microwave, and the bottom shelf has room for a coffee maker, toaster, or other kitchen essentials. It even has an adjustable and removable rack of 7 built-in hooks for hanging cups, mugs, utensils, gadgets, and pot holders. No-tool assembly allows you to construct this unit easily, and adjustable leveling feet provide customization and stability on slightly uneven surfaces. It also includes an anti-tip wall anchor kit for additional safety and security. To keep it looking clean and fresh, simply wipe with a damp cloth and towel dry. Reduce clutter and wasted space with Whitmor, and bring organization home..2-shelf unit designed to stand over and around a standard-size mini-fridge to maximize vertical space above.Over-the-fridge stand is perfect for a small microwave, coffee maker, toaster, or other kitchen essentials.Sturdy frame and strong wire shelving made of heavy-duty steel with a durable black epoxy coating.2 adjustable grid wire shelves, each supporting up to 105 pounds, minimizes dust and provides venting for appliances.Removable and adjustable rack of 7 built-in hooks for hanging cups, mugs, utensils, gadgets, and pot holders.Adjustable leveling feet for customization and stability on slightly uneven floor surfaces.No-tool assembly allows you to construct this shelf unit quickly and easily.Includes anti-tip wall anchor kit for additional safety and security.Assembled Dimensions (inches): 15.75 D x 23 W x 56.5 H.Maximize Kitchen Space with the Whitmor Supreme Over-the-Fridge Shelf Featuring Mug and Cup Hooks
Add a sturdy, 1U server rack shelf into almost any rack or cabinet. This 1U rack shelf lets you add 10 in. of flat storage space to any EIA-310 compliant server rack or cabinet. Ensure your equipment is secure: The durable fixed-rack shelf can hold up to 20 kg (44 lb.s. ) of equipment and is constructed using SPCC commercial-grade cold-rolled steel. Make the most of your available space: The 1U cantilever shelf lets you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space. It's perfect for your SOHO (small office, home office) environment, server room or any other location with limited space available. Customize your setup: You can install the 1U vented rack shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable or storing your tools. The CABSHELF1U10 is backed by a StarTech.com lifetime warranty and free lifetime technical support..Ensure your equipment or tools are secure with heavy-duty steel construction.Save space in your office or server room by placing non-rackmount IT or AV equipment on your rack.Hassle-free compatibility with EIA-310 compliance
Quartet® Garment rack in black color has 12 hangers and 2 perforated shelves for garment ventilation. Rack measuring 61.5" x 48" has adjustable leveling glides that are ideal for subtle garment storage in meeting as well as conference rooms..Surface color: Black.Paint/finish: Powder coat.Material: Steel.Perforated shelves for garment ventilation.Adjustable leveling glides.Top storage shelf, bottom shelf for boots.Single-sided freestanding garment rack features a top and bottom shelf for double the storage space.3" standard hanger spacing.Two shelves provide ample space to hold not only coats but hats, footwear and other miscellaneous items.Black finish is stylish and modern allowing rack to provide neat, subtle garment storage in meeting and conference rooms.Shelves hold hats, footwear and miscellaneous items.Levelers keep rack stable on all floor surfaces.Attachable umbrella rack and 12 durable hangers included.Attractive, contemporary, radius design blends into any environment
The Traxx Solutions rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack. The rack is constructed from durable 16-gauge steel with an industrial powder coated finish and is guaranteed to fit the models: MX68, MX68W (rear facing orientation only), MX68CW (rear facing orientation only). An assortment of mounting holes support rear facing mounting for network connection visibility or forward mounting for a cleaner rack aesthetic, leaving only the status indicator light in view..This rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack.Dimensions: 1.75"H x 19"W.Made of durable 16-gauge steel in a black powder-coated finish.Compatible with Cisco Meraki MX68, MX68W (rear-facing orientation only), MX68CW (rear-facing orientation only)
This heavy duty rack can be adjusted from 19 1/2-inch to 38inch to fit your rack. It is constructed using 1.0mm SPCC commercial grade cold-rolled steel, providing the ability to hold up to 80kg (175lbs) of equipment..Adjustable Mounting Depth: Easily fits a wide range of server racks and cabinets with adjustable brackets from 19.5" to 38"..Heavy-Duty Load Capacity: Supports up to 80kg (175 lbs) of mission-critical hardware and non-rackmount equipment..Universal 19” Rack Compatibility: Designed for standard 19" server racks with a 1U height profile..Durable Steel Construction: Built with 1.0mm SPCC cold-rolled steel for long-lasting performance in industrial environments..Front-Mount Installation: Simple front-only mounting for quick and secure setup..Optimized Ventilation: Vented design promotes airflow to help maintain optimal operating temperatures for your equipment..Dimensions: 1.7" (H) x 19" (W) x 27.6" (L).Supports up to 175 lbs. (80 kg) of equipment - ideal for heavy servers, UPS systems, and non-rackmount gear in demanding IT or industrial environments..Commercial-grade steel with black powder-coated finish.Mounting Options: Front mount only.Rack Unit: 1U.Enclosure Thickness: 1.0 mm.Rack unit 1U height.Certifications: CE, RoHS Compliant.Warranty Lifetime limited.What's in the Box: 1 x Adjustable Vented Rack Shelf, 2 x Rear Mounting Brackets, 8 x M5 Panel Screws, 1 x Instruction Manual.Startech ADJSHELFHDV Vented Server Rack Cabinet Shelf has an adjustable mounting depth bracket that makes it simple to add a storage shelf to a wide variety of racks or cabinets.
This heavy duty rack can be adjusted from 19 1/2-inch to 38inch to fit your rack. It is constructed using 1.0mm SPCC commercial grade cold-rolled steel, providing the ability to hold up to 80kg (175lbs) of equipment..Adjustable Mounting Depth: Easily fits a wide range of server racks and cabinets with adjustable brackets from 19.5" to 38"..Heavy-Duty Load Capacity: Supports up to 80kg (175 lbs) of mission-critical hardware and non-rackmount equipment..Universal 19” Rack Compatibility: Designed for standard 19" server racks with a 1U height profile..Durable Steel Construction: Built with 1.0mm SPCC cold-rolled steel for long-lasting performance in industrial environments..Front-Mount Installation: Simple front-only mounting for quick and secure setup..Optimized Ventilation: Vented design promotes airflow to help maintain optimal operating temperatures for your equipment..Dimensions: 1.7" (H) x 19" (W) x 27.6" (L).Supports up to 175 lbs. (80 kg) of equipment - ideal for heavy servers, UPS systems, and non-rackmount gear in demanding IT or industrial environments..Commercial-grade steel with black powder-coated finish.Mounting Options: Front mount only.Rack Unit: 1U.Enclosure Thickness: 1.0 mm.Rack unit 1U height.Certifications: CE, RoHS Compliant.Warranty Lifetime limited.What's in the Box: 1 x Adjustable Vented Rack Shelf, 2 x Rear Mounting Brackets, 8 x M5 Panel Screws, 1 x Instruction Manual.Startech ADJSHELFHDV Vented Server Rack Cabinet Shelf has an adjustable mounting depth bracket that makes it simple to add a storage shelf to a wide variety of racks or cabinets.
Its rectangular shape and ample capacity make it ideal for use in laundry rooms, bathrooms, bedrooms, or balconies. Expands from 24.5" to 42.5" depending on your need and with up to 40 feet of hanging potential, you'll have plenty of room for all your clothes and linens. The top 4 dowels are arranged for flat drying, allowing for gentle and efficient drying of delicate items. This rack is easy to use and store, and its lightweight design makes it the perfect choice for smaller homes, apartments, dormitories, and townhouses. No-tool assembly, done in minutes, and you'll be ready to enjoy the benefits of air drying in no time..A standing and foldable drying rack that features a black metal frame with 11 rods for drying.Expands from 24.5" to 42.5" providing up to 40 feet of drying space.Ideal for indoor use in laundry rooms, bathrooms, bedrooms, or balconies.Entire rack has a maximum weight capacity of 15 pounds.Open: 39.25" H x 24.5" W x 15" deep, expands to 42.5" W; Closed: 20.5” H x 24.5” W x 4” deep.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.This folding, expandable standing drying rack is a sleek and efficient solution for drying clothes, towels, or linens without relying on electricity or taking up much space.
The Traxx Solutions rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack. The rack is constructed from durable 16-gauge steel with an industrial powder coated finish and is guaranteed to fit the models: MX64, MX64W (rear facing orientation only), MX67, MX67W (rear facing orientation only), MX67C (rear facing orientation only). An assortment of mounting holes support rear facing mounting for network connection visibility or forward mounting for a cleaner rack aesthetic, leaving only the status indicator light in view..This rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack.Dimensions: 1.75"H x 19"W.Made of durable 16-gauge steel in a black powder-coated finish.Compatible with Cisco Meraki MX64, MX64W (rear-facing orientation only), MX67, MX67W (rear-facing orientation only), MX67C (rear-facing orientation only)
The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall
Keep the office mail system running smoothly with this sorter module, which can accommodate documents up to 11 inches wide. The powder-coat finish and heavy-gauge steel construction of this module make it durable enough for extensive use in high-traffic areas. This Safco E-Z Sort mail sorter module comes with 20 shelves to create up to 25 sections, making it perfect for small to mid-sized offices..Extra-wide mail organizer with 25 slots, can also be used to sort, store and organize documents.Overall dimensions: 14.25"H x 57.5"W x 13"D, product weight is 56 lbs..Made of durable heavy-gauge steel with powdered gray coat finish.11" mail shelves form combination of up to 25 shelves.Stand-alone or stacked, stacks up to four high.20 molded compartment shelves, each with finger cutout and label holder.Shelves adjust in 0.75" increments.Assembly required.Shipping dimensions and weight: 5.5"H x 14.75"W x 59"D, 56.6 lbs..Lifetime manufacturer limited warranty.Sort mail and other documents with this Safco gray E-Z Sort module.
Household Essentials Antique bronze valet dryer keeps clothes aired and properly hung without unsightly bulkiness. Dryer can be placed beside the ironing board to keep pressed items smooth and wrinkle free..This classic Antique Bronze Valet keeps clothes aired and properly hung without unsightly bulkiness.Antique bronze.Material: Steel.Dimensions: 61"(H) x 22 1/2"(W) x 19 3/4"(D).Take a bit of convenient refinement with you wherever you need it with this portable Valet.Use it next to your vanity to hold your next day's attire.Place it beside the ironing board to keep pressed items smooth and wrinkle free.Keep it by the washing machine to air delicates, or take it outside for an instant solar dryer.Save energy and give your clothes the fresh air scent of the outdoors.Portable garment rack sets up instantly.Folds flat for storage, Instantly provides generous clothes-hanging space in bedrooms, laundry rooms, and more.Sturdy, tubular steel framing with splayed design for stability.Freestanding clothing valet supplements overcrowded closets and wardrobes.Folding design stores compactly and assembles easily with no tools required.Household Essentials Antique bronze valet dryer provides instant extra hanging space and folds flat for convenient storage.
Innovation 2 Post, 2U kit relay rack mount kit is made of solid steel and has simple installation compatible with 3" uprights. Kit is compatible with many Dell, HP, IBM, other equipment includes hardware..Material: Solid steel construction.Compatibility: IBM x300 server, IBM x305 server, IBM x325 server, IBM x330 server, IBM x335 server, IBM x345 server.Only convert the space you need.2u, 3u, 4u, 5u and 7u.Quick and simple installation.Compatible with many dell, hp, ibm, other equipment.Preferred 2post mount by oem manufacturers.Compatible with 3" uprights.Dimensions: All brackets are 29 1/8" wide, height depends on u size.Weight: 50 lbs.Innovation 2 Post, 2U kit relay rack mount kit is designed to convert the required space.
The Tripp Lite SmartRack black low-profile wall-mount rack enclosure cabinet measuring 35.6" x 23.62" x 21.6", protects and organizes 18U of 19" rack equipment in network closets, classrooms and other locations with limited floor space. This cabinet with hinged back, features steel construction for durability. The clear acrylic window of the cabinet keeps the equipment clearly visible. It has 250 lbs. of holding capacity. The hinged back wings away from the wall to allow easy access to equipment. It has rails that support square-hole or threaded-hole mounting..Steel construction for added durability.Dimensions: 35.6"H x 23.62"W x 21.6"D.Form factor: Wall mountable
4XEM™ 12 U wall mount server rack cabinet has ventilated front door and side panels which keeps the equipment safe and allows for generous airflow. Rack cabinet has adjustable rack rails with square mounting holes and weighs around 48.50 lbs..Compatibility: 19" rack mount equipment.Wall mountable form factor.Rack height: 12U.Weight capacity: 200 lbs..Ventilated front door and side panels keep equipment safe and allow for generous airflow.Permits easy access.High quality steel build.Weight: 48.5 lbs..Warranty: Lifetime limited.4XEM™ 12 U wall mount server rack cabinet in black color supports up to 200 lbs and provides cable management in IT network applications with limited floor space. .
4XEM™ 9 U wall mount server rack cabinet has ventilated front door and side panels which keeps the equipment safe and allows for generous airflow. Rack cabinet has adjustable rack rails with square mounting holes and weighs around 35 lbs..Compatibility: 19" rack mount equipment.Wall mountable form factor.Rack height: 6U.Weight capacity: 200 lbs..Ventilated front door and side panels keep equipment safe and allow for generous airflow.Permits easy access.High quality steel build.Weight: 35 lbs..Warranty: Lifetime limited.4XEM™ 9 U wall mount server rack cabinet in black color supports up to 200 lbs and provides cable management in IT network applications with limited floor space. .
Safco Pivot wall rack is designed to hold up to 12 hanging clamps and includes pivot brackets. Rack installation is recommended on wall studs or solid backed wall surface..Pivot wall rack.Accommodates any length clamp.Steel rack bolts to any wall.Includes 12 pivot brackets.Unit measures 24"W x 9 1/2"H.Holds 12 hanging clamps (sold separately); approximately 100 sheets per clamp.Includes mounting hardware.Assembly required.Safco Pivot wall rack bolts to a wall for space saving storage and measures 24" x 9 1/2".
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Standard 14 gauge double rivet beam has 2 3/4" profile and each shelf can handle loads up to 1,800 lbs.84"H x 69"W x 30"D.Medium grey paint with enamel finish to ensure years of lasting beauty.Unassembled-quick, easy assembly with a mallet, no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
The Tripp Lite SmartRack® SRWF4U 4U low-profile vertical-mount rack cabinet is designed to house shallow equipment up to 20" deep in network closets, retail locations and classrooms. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 150 lb. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. The vented top, bottom and removable side panels allow air to flow freely through the cabinet to keep the equipment cool..Low profile secure rack cabinet is suitable for network wiring closets, retail locations, classrooms and back offices with limited floor space.Dimensions: 73.15 cm H x 65.02 cm W x 20.32 cm D, 19"W (rack), Device depth: 43.18 - 50.80 cm.Black steel.Form factor: Wall mountable.Maximum weight capacity: 150 lbs., static/stationary weight capacity: 150 lbs..Rack height (U spaces): 4.Houses EIA-standard 19" rack equipment in 4U of space, vertical-mount cabinet extends only 8" from the wall while housing equipment up to 20" deep.Includes a slide-out 2U mounting bracket for patch panels up to 2 1/2" deep, top panel and reversible front door lock securely to prevent damage/theft.Front door latch accommodates a user-supplied padlock for added security, vented cabinet keeps equipment cool, convenient ports with removable covers.Wall mounting holes spaced 16" apart for standard wall stud placement, rails adjust easily, threaded mounting holes support M6 or 12-24 mounting.Rack spaces marked for easy reference, provides physical equipment and media security required for PCI DSS compliance.Includes rack cabinet, 12 x M6 screws, 12 x M6 cup washers, 12 x 12-24 screws, 2 x keys, owner's manual.Meets Green compliant, RoHS, EIA-310-E standards.Weight: 27.3 Kg.Comes with 5 year limited warranty
Whitmor's convertible garment rack lets you transform a single rod to a double rod garment rack in seconds. The single rod accommodates longer garments while the double rod allows for extra hanging space. Includes wheels that allow you to move the garment rack when you need to while 2 wheels lock for added stability. Use it as additional storage space in the closet or on the go for easy hanging storage. It is easy to care for, just wipe with a clean damp cloth to keep it looking as good as new for years to come. Assembly is easy with the tools included. Whitmor is a 4th generation family-owned and operated business. Since 1946, Whitmor has been dedicated to bringing organization home by creating products that simplify everyday life. Ensuring that those products are built with integrity, value, and innovation is our commitment to you..Portable convertible garment rack.Single rod accommodates longer garments.Transform a single rod to a double rod garment rack in seconds.Includes wheels that allow you to move the rack easily.2 wheels lock for added stability.Durable steel frame.Easy assembly with the tools included.Easy to clean, just wipe with a damp cloth and towel dry.Versatile Storage Solution with the Whitmor Convertible Garment Rack
Tripp Lite Cantilever fixed rack shelf is made of cold-rolled steel construction guaranteed to stand up to the rigors of everyday IT use. Shelf with 12" shelf depth is ideal for 2- or 4-post open frame racks and rack enclosures..Capacity: 18.14 kg.Compatibility: 2 PT / 4 PT rack enclosure.Dimensions: 1 3/4"(H) x 19"(W) x 12"(D).Rack units: 1U.5 years limited warranty.Tripp Lite Cantilever fixed rack shelf measuring 1 3/4" x 19" x 12" provides space for equipment like tower units, monitors and other non-mountable equipment.
Carrying documents from desk to desk or shuffling them about is messy and pass. This mobile plan center lets you easily roll your files anywhere, anytime. Simply drop the files in and lift them out, as needed. Composed of heavy gauge steel with ball bearing swivel casters (2 with brakes), this unit allows for up to 18 hanging clamps with adjustable widths of 24 in to 42 in. (Clamps are sold separately). The stand is simple to set up and simple to use..Measuring 51"H x 47"L x 20"D with an adjustable length from 29 to 47 inches, this mobile rack will effectively store your larger files with ease.To provide long-lasting strength and use throughout the years, this mobile blueprint stand is composed of heavy gauge steel with a powder-coated finish.Large file storage rack boasts a 360-pound weight capacity and can hold up to 1800 documents at once.The bottom is outfitted with four, ball-bearing swivel casters to facilitate easy movement from one location to the next with two lockable front casters to keep the unit securely in place when you get to your destination.Accommodating up to 18 clamps at the same time, just clamp your files into the paper clamps and drop them into the top bracket for quick access to your hanging blueprints.Fits 18 clamps 24”, 30”, 36”, or 42” long.Minimum Outer dimensions: 29”L x 20”W x 51”H.A perfect storage area for hanging maps, blueprints, plan drawings and other large-format documents.1 year manufacturer warranty.Black finish.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Blueprint, Maps, Filing and Storage
Protect patch panels, network switches, and other valuable rack equipment in this heavy-duty steel rack enclosure cabinet. Front, bottom, and side panels are vented to allow cooling, while top and bottom ports simplify cable routing. The cabinet comes pre-assembled and supports both square-hole and 12-24 threaded-hole wall mounting. With a maximum load capacity of 200 pounds, this Tripp Light SmartRack 6U rack enclosure easily accommodates all your rack equipment..Wall-mountable enclosure cabinet secures and organizes 6U of 19" rack equipment in network closets, classrooms, and other locations with limited floor space.Dimensions: 14.5"H x 23.63"W x 17.5"D.Side panels and front door lock securely to help prevent damage, tampering, or theft.Vented panels allow generous airflow that keeps equipment cool.Front and back door frames.Rack height: 6U.Meets or exceeds UL, EIA-310-E, RoHS, IP20, PCI DSS, CSA 60950-1 standards.5-year manufacturer limited warranty.Organize and house rack equipment securely in this Tripp Lite SmartRack 6U wall mount rack enclosure cabinet.
This 4-section Coated Steel Large Organizer from Better Houseware is designed for your kitchen or office. It's ideal for storing and organizing large plates, serving trays, and cookie sheets, or magazines, folders, and binders, and even LPs. Keep your items organized easily..Ideal for kitchen or office storage.Coated-steel wire rack works to store large size items.4 divider slots help store awkwardly sized items securely, such as large plates, serving trays, cookie sheets, and more.Each slot is approximately 2.5 in. wide.Durable organizer; rack will stand up to heavy items.Dimensions: 10-3/4 in. x 10-1/4 in. x 7-1/2 in. H
The SRWF12U38 SmartRack 12U Low-Profile Vertical-Mount Server-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices, two-post racks and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 400 pounds. Because the low-profile cabinet mounts vertically, it extends only 16 inches from the wall while housing equipment up to 35 inches deep, including 1U servers, UPS systems, battery packs and switches. In addition to 8U of rack space in the primary mounting area, it also includes a 4U mounting space at the top of the enclosure for patch panels. The top cover and front panel are removable to allow expedient access to equipment. The cover also locks securely with the included keys to help prevent damage, tampering or theft. The vented cabinet allows air to flow freely and keep equipment cool. Convenient top, bottom and side ports allow easy cable routing. The SRWF12U38's modular design allows you to disassemble the cabinet in minutes for wall-mounting with user-supplied hardware. Mounting holes are spaced 16 inches apart to accommodate standard wall studs. Equipment installation is easy with threaded mounting holes that support 12-24 mounting in two-post racks. Features Saves Valuable Workspace Recommended for areas with limited floor space where you need equipment to be secure, organized and out of the way. Houses EIA-standard 19 in. rack equipment in 8U of space. Also includes 4U of mounting space at the top of the enclosure for patch panels. Extends only 16 in. from the wall while housing equipment up to 35 in. deep. Maximum load capacity of 400 lb. Keeps Important Equipment Secure Top cover locks securely to help prevent damage, tampering or theft. Vented cabinet keeps equipment cool. Convenient ports with removable covers allow cable routing through top, bottom and sides Easy Enclosure and Equipment Installation Modular design for easy disassembly and assembly. Wall-mounting holes spaced 16 in. apart for standard wall stud placement. Threaded mounting holes support 12-24 mounting in 2-post racks. Rack spaces marked for easy reference Meets Payment Card Industry Standards Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Maximum load capacity of 400 lb..Locking steel cabinet vented to keep equipment cool.Secures 8U of 19 in. rack equipment up to 35 in. deep.Includes additional 4U of space for patch panels.Modular design for easy disassembly and assembly
StarTech.com® Vertical wall mount equipment rack bracket is compatible with network device, power strip, patch panel. 5.9" x 19.8" x 2.4" Rack bracket constructed with solid steel is ideal for mounting on virtually any wall/ceiling surface..Capacity: 125.3 lbs..Compatibility: Network device, power strip, patch panel.Dimensions: 5.9"(H) x 19.8"(W) x 2.4"(D).Frame type: Open frame.Wall mountable: Yes.Rack size: 19".Rack units: 1U.StarTech.com® Vertical wall mount equipment rack bracket measuring 5.9" x 19.8" x 2.4" offers space-savings for environments lacking the footprint space for a full size server equipment rack.
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Includes three 24"D industrial steel shelves with 1,750 lb., capacity per shelf evenly distributed.84"H x 72"W x 24"D.Long lasting durable medium grey paint finish.Quick, easy assembly with a mallet - no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.Unassembled.One year limited warranty.Special Order Item-Non-Returnable
The Tripp Lite SmartRack SRW12UDP Switch-Depth-Plus rack cabinet secures and organizes 12U of 19" rack equipment in network closets, classrooms and other locations with limited floor space. This locking steel cabinet in black, has flow-through ventilation at side, front, top and bottom that helps to keep the equipment cool. The low-profile cabinet has 200 lbs load capacity..Low-profile rack cabinet secures and organizes equipment in network closets.Dimensions: 25.1"H x 23.6"W x 21.8"D, 12U (rack height), 19"W x 20.5"D (rack).Black steel.Load capacity: 200 lbs..Form factor: Wall mountable.Interface/ports: 8 x RJ-11.Application/usage: LAN switch, patch panel.Convenient ports with removable covers allow cable routing through top and bottom.Front and back door frames, vented panels allow generous airflow that keeps equipment cool.Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space.Side panels and front door lock securely to help prevent damage, tampering or theft.Includes 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, 20 x 12-24 screws, 2 x keys, owner's manual.RoHS compliant.Weight: 58.4 lbs..Comes with 5 year limited warranty.Black low-profile rack cabinet secures and organizes 12U of 19-inch rack equipment in network closets, classrooms and other locations with limited floor space.
Give your guests easy access to magazines, pamphlets and brochures with this Safco 23-pocket magazine rack. Durable steel construction stands up to everyday use in your busy office, while the conveniently sized pockets hold a wide range of reading materials. This Safco 23-pocket magazine rack mounts securely to your wall, keeping clutter off waiting room tables. Base sold seperately..Display the latest editions of your magazines and books in the magazine floor holder.Black steel construction for strength and durability.Dimensions: 65.5"H x 10"W x 4"D.23 pockets to place all the literature you wish to display.Can be placed on floors and walls or mounted on a wall for easy viewing.Base sold separately, Model # 4323BL.⚠ WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture..Keep reading materials handy in your waiting area with this Safco black 23-pocket steel magazine rack.
The Tripp Lite SRW15US SmartRack 15U Low Profile Switch Depth Wallmount Rack Enclosure Cabinet is designed to house EIA-standard 19 in. rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 lbs. The cabinet swings away from the wall on a sturdy hinge, allowing easy backdoor access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW15US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack..Ideal for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space.Secures 15U of 19 in. rack equipment up to 20.5 in. deep.Maximum load capacity of 200 lbs..Swings away from wall on hinge for easy, backdoor access to equipment and cabling during installation and maintenance.Cabinet should be rotated 180° before mounting to open reversible doors left or right.Locking steel cabinet vented at sides, front, top and bottom.Flow-through ventilation keeps equipment cool.Convenient ports with removable covers allow cable routing through top and bottom.Wall-mounting holes spaced 16 in. apart for standard wall stud placement.Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels.Rails support square hole or 12-24 threaded-hole mounting.Rack spaces numbered for easy reference.Can be converted to a roll rack with optional SRCASTER (sold separately).Meets Payment Card Industry Standards.Ships fully assembled.5-year limited warranty.Includes 20 M6 screws, 20 M6 cage nuts, 20 M6 washers, 20 12-24 screws and 2 keys
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Includes three 48"D industrial steel shelves with 2,000 lb., capacity per shelf evenly distributed.84"H x 60"W x 48"D.Long lasting durable medium grey paint finish.Quick, easy assembly with a mallet - no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.Unassembled.One year limited warranty.Special Order Item-Non-Returnable