Tilt And Swivel TV Wall Mounts

This Mount-It! weatherproof TV mount is specially designed for your outdoor movie night or watching your favorite sport or TV show in the comfort of your own backyard. Powder coating, electroplating, and stainless steel hardware ensure this TV mount withstands harsh weather conditions, is resistant to rain, corrosion, and humidity. The full-motion mount holds TVs with screens between 37" and 80" and securely supports a maximum weight of 110 lbs. To help you find your perfect viewing angle, the mount can swivel 120 degrees, tilt +10/-20 degrees, and can be extended up to 20" from the wall..Weatherproof TV wall mount designed for your perfect outdoor viewing experience.Dimensions: 16.92"H x 25.98"W x 2.5"-20"D.Compatible with TVs between 37" to 80" and up to 110 lbs..Full-motion design ensures you will find your perfect viewing angle with a 60-degree swivel left and right, tilt +10/-20 degrees, and an extension up to 20" from the wall.Outdoor durability is achieved through electroplating, extended powder coating, and stainless steel hardware, which makes this mount resistant to corrosion, rain, and humidity.Rigorous 90-hour salt spray test ensures the mount is suitable for coastal environments and was designed to withstand harsh weather conditions.VESA compatibility: 200 x 200, 300 x 200, 400 x 200, 300 x 300, 400 x 300, 400 x 400, 600 x 400.Made of durable powder-coated steel in black.Suitable for both indoor and outdoor use

The Mount-It! extra-long arm TV mount is designed for extra-large screens. The mount extends up to 38" and features a sliding arm adjustment along with the wall plate. Built-in cable management is included for a clean look and will prevent pinching of your audio video and power cables. Get the most out of your TV's high-definition quality with this versatile and heavy-duty mount..Full-motion TV wall mount with dual long-extension arms is made for extra large screens.Fits 65"-110" screens up to 275 lbs. and VESA patterns from 100 x 100mm to 800 x 600mm, and holds up to 275 lbs..Made of steel and comes in black.Extension: 3.7"-38".Dual arms prevent sagging when extended.Designed for 16" and 24" stud spacing or concrete.Built-in cable management is included for a clean look and will prevent pinching of your audio/video and power cables.Post-installation leveling feature will ensure you have a perfect installation every time, even if your TV is crooked.Tilt: 10 degrees down/5 degrees up.Swivel: up to 90 degrees.All necessary hardware included.Supported by manufacturer's limited lifetime warranty

Upgrade your television viewing experience with this. This, Full Motion Articulating TV Wall Mount makes viewing more enjoyable. The TV wall mount swivels ± 180° when the bracket is extended, with ± 2.8° horizontal adjustments and tilts from -10° to +2° to eliminate glare and reduce neck or eye strain. This full motion TV wall bracket can be extended to 25.3” from the wall for a more exciting viewing experience. Start enjoying your new view in no time! The UA-PRO640 is an easy to install TV mount with all the hardware included. With the Full Motion Articulating TV Wall Mount, you can mount your large flat screen TV with confidence! Designed to mount screens anywhere from 37” to 100”, suitable for VESA 200x200 and 600x400, in your family room, media room, den, or bedroom. The Extra-Large Full Motion Articulating Wall Mount allows you to enjoy your safely and securely mounted flat screen TV in comfort. Enjoy a great picture no matter where you sit with the tilt, swivel, and rotation features..Full-Motion Wall Mount.13.6'' H x 2.9'' W.150 lbs.

The Stanley® DIY Basics 13"-37" FULl Motion Mount is an easy to Install mount for TVs up to 40lbs. It features fULl swivel, tilt and level correction along with VESA® 200 x 200 compatibility. It also allows for extension up to 5" from the wall and retracts to only 2" in depth..Fits 13"-37" TVs.Holds 40lbs.Tilts -10 degrees -5 degrees , swivels 90 degrees.Extends 5" from the wall & retracts to 2" depth.FULl swivel, tilt & level correction.VESA® 200 x 200 compatible

Free up space by mounting your flat-panel TV on a wall, with full-motion adjustment capability. Maximize space while creating an impressive display. With its dual-arm design, this heavy-duty TV wall mount securely supports large flat-screen TVs up to 70". The arms are easy to extend, to provide smooth, full-motion positioning for ideal viewing.Mount your monitor to save valuable spaceIdeal for the boardroom or digital signageMount your flat-screen TV in a location that's convenient for visitors, clients and employees, and frees up valuable space. The wall mount is ideal for the lobby, boardroom or other venues, providing an impressive and secure way to display a large flat-panel TV or create digital signage. The TV wall mount supports most 32" to 70" (812.8 to 1778 mm) LED or LCD flat panel TVs weighing up to 99 lb. (45 kg).Full-motion adjustmentThe TV wall mount provides full-motion adjustment capability. The dual-arm extends up to 20.3" (517 mm) from the wall to provide a wide range of movement and accommodate different screen positions and angles. The dual-arm can also fold to tuck-in closely to the wall, providing a low profile that enables your display to be positioned just 2.24" (57 mm) from the wall.The TV wall mount swivels +90° / -90° to provide maximum viewing flexibility. The mount also tilts +5° / -8°, letting you angle your TV display toward your audience. With the tilt feature, you can mount your TV lower or higher than eye level and still view it comfortably. A built-in level adjustment also offers 5° clockwise and counterclockwise turning, to ensure your display is perfectly level. Heavy-duty steel constructionThe robust steel TV wall mount, with its dual-arm design and dual-stud mounting for studs placed 16" apart, provides increased durability and security. It safely and securely supports your flat-screen TV, to protect your investment. The TV wall mount also includes built-in cable management to keep cables neatly out of sight.The FPWARTB2 is backed by a StarTech.com 2-year warranty and free lifetime technical support..Heavy-duty steel TV wall mount with dual-arm design.Supports most 32"-70" LED, LCD flat panel TVs up to 99 lb. (45kg).Full-motion adjustment with arm extension up to 20.4" (517 mm)

The Mount-It! 40" heavy-duty mount is one of the longest extending mounts. Made of heavy-duty steel with two support arms, this mount is designed to be one of the strongest possible brackets to support TVs weighing up to 110 pounds, so you know your TV is in safe hands. Tilt your screen down 15 degrees and swivel left or right at three pivot joints. Provides smooth adjustment for all directions, so you can choose the most comfortable and healthiest viewing angles. Full-motion movement makes this mount ideal for corner installation, inside an entertainment center, or anywhere you want..Full-motion wall TV mount with dual long-extension arms is made for extra large screens.Fits TVs with VESA patterns 75 x 75mm up to 400 x 400mm, holds screens up to 70" and weighing up to 110 lbs..Made of black heavy-duty steel.Extension: 3.2"-40".Dual-arm design prevents sagging when TV is extended.Full-motion mount can tilt, swivel, and extend for the perfect positioning.Tilt: 15 degrees down/5 degrees up.Swivel: up to 180 degrees.Package includes: wall mount, installation hardware, easy-to-follow installation instructions.Supported by manufacturer's limited lifetime warranty

Mount-It! full-motion TV wall mount with shelf conveniently holds your DVD player, gaming console or other media devices near your TV for an easier connection. Full-motion TV mount allows maximum viewing flexibility. Upgrade your entertainment center with this TV wall mount with shelf for a clean, sleek and minimalist look. Fits TVs up to 55 inches, with VESA patterns from 75x75mm to 400x400mm..Full-motion TV wall mount with shelf conveniently holds your DVD player, gaming console, or other media devices near your TV for an easier connection.Compatible screen size: 32" to 55"; VESA compatibility: 75 x 75 to 400 x 400 (mm); weight capacity: 66 lbs.; shelf weight capacity: 22 lbs..3.5"-15.7" TV mount profile allows for maximum viewing flexibility.Swivel range: from 90 degrees to -90 degrees.Tilt range: from 20 degrees to -20 degrees.Easy single-stud installation.Supports cable management for keeping your cables organized.Package includes: wall mount, HDMI cable, cable ties, screen cleaner, microfiber cloth.Supported by manufacturer's limited lifetime warranty

The MegaMounts full motion wall mount with bubble level for easy centering fits 26" - 55" Plasma/LCD/LED TV securely. This mount is a space saver as it contrasts when not in use and upon extending from wall up to 17 1/2", tilts 0 to 12 deg and swivels up to 180 deg. This mount with a holding capacity of 100 lbs, comes with mounting hardware..TV mount holds DVD players and gaming consoles securely.Comes in black color.Full-motion wall mount with mounting hardware.Features 180 deg swivel, so you can view from different angles.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Free up valuable floor space and position your monitor or TV for greater flexibility and productivity. The Fellowes full-motion TV wall mount fits displays up to 55" and is great for a wide array of spaces and environments. Securely mounts to a wall and easily tucks into tight places. Achieve the perfect viewing position with the depth adjustability. Minimize clutter with the intuitive cord management system..Full-motion TV wall mount designed to make it easier to mount your TV or monitor.Dimensions: 17.88"H x 16.25"W x 19.75"D.Holds a monitor up to 55", maximum load capacity: 77 lbs..Made of heavy-duty steel, comes in black.360-degree rotation makes the transition between portrait and landscape orientation much easier.Allows for tilt, swivel, and levelling adjustment.Securely mounts to a wall and easily tucks into tight places.Minimize clutter with the intuitive cord management system.Meets or exceeds VESA mounting standards.3-year manufacturer limited warranty

The steel and aluminum construction of this VESA TV Wall Mount supports TVs from 23" to 55" and up to 66lbs. The arm assembly provides smooth one-touch height adjustment thanks to its spring-loaded mechanism that acts as a counterbalance. The VESA plate supports mounting patterns of 75x75 to 400x400..Spring-assisted height adjustable TV wall mount (range 12.6in/32cm); Tilting and full motion for 23"-55" TVs; VESA TV wall mount patterns 75x75 to 400x400; Max weight 66lb (30kg).VESA plate features +/-90° swivel; +8/-15° tilt; +/-3° rotation.Jointed arm swivels +/-90° and folds to 2.2in (5.8cm) from the wall for low-profile storage; Max arm extension 23.4in (59.5cm).TV mounting bracket ships assembled for quick deployment; Keyhole mounting on the wall plate simplifies installation.Versatile TV Mounting for up to 55"

The MegaMounts wall mount bundle with bubble level for easy centering fits 26" - 55" TVs securely. This mount is a space saver as it contrasts when not in use and upon extending from wall up to 17 1/2", tilts 0 to -12 deg. This mount is a space saver as it frees up space and keeps cords off the floor. This mount with a holding capacity of 100 lbs, comes with mounting hardware and HDMI cable..Comes in black color.Full-motion wall mount with mounting hardware.Features 180 deg swivel, so you can view from different angles.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

The STANLEY 37 in. to 80 in. Large Full Motion Single Arm TV Mount is ideal for displaying your flat or curved screen on any flat surface. This unit is designed to be mounted on 2 studs and will hold up to 130 lbs. It features 1 arm and integrated cable management for a neat and clean appearance after installation. All hardware required is included and it installs in seconds..Fits TVs from 37 in. to 80 in..Supports up to 130 lbs..Installs in 2 studs.Single arm.Depth: 2.7 in..Tilt amount: +5° to -15°.Swivel: 180°.Extension: 24.2 in..Simple and easy to install and operate.Offers full motion capabilities.Features several state-of-the-art safety and security features.Integrated cable management..VESA mounting pattern: 200 x 200 up to 600 x 400.Includes manual, template, screws, nuts, and mounting hardware

The Mount-It! heavy-duty TV wall mount supports VESA compatible displays incl. curved TVs up to 100" and 165 lbs. Engineered from high-grade steel, the heavy duty tv wall mount securely supports VESA compatible displays, including curved TVs. With a smooth and effortless motion, you can extend the articulating arm out from the wall up to 31.7". You can also retract the arm back to nest just 2.9" away from the wall. Swivel your screen +/- 90 degrees and tilt your screen -2 to +15 degrees for great viewing and to reduce glare. The TV wall mount bracket also has a screen level adjustment, so you can adjust your display up to 3 degrees clockwise or counterclockwise after it is installed..Low profile full-motion wall TV mount is great for a meeting space, lobby, boardroom, classroom or other venues.Dimensions: 19.2"H x 31.5"W x 26.4"D.Maximum weight capacity: 165 lbs.; compatible with 37" to 100" displays and VESA patterns from 200mm x 100mm to 600x400 mm.Engineered from high-grade steel in powder-coated black finish.Full motion TV wall mount with post-install lateral shifting lets you center the display on a wall or corner, with 16"/24" off-centered studs and a range of 47"/1.2m from left to right.The adjustable tv wall mounting bracket with integrated cable management and optional black snap-on covers keeps flat screen cables organized.Swivel your screen +/- 90 degrees and tilt your screen -2 to +15 degrees for ideal viewing and to reduce glare.Securely wall-mount your TV for easy viewing in boardrooms, lobbies, classrooms and meeting spaces.Universal TV wall mount supports LG, Samsung, Sony, Sharp, among others (screws/spacers included).5-year manufacturer limited warranty

This full-motion locking TV mount features a removable VESA plate for easy installation and works great as an outdoor TV mount, allowing you to bring your TV indoors at night. The single-stud installation and integrated bubblehead is purposely designed to make mounting your TV a breeze. Rotate this mount to get the perfect view of your screen and enjoy its 360-degree rotation ability as well as its swivel and tilt abilities..Full-motion TV wall mount is great for indoor and outdoor use.VESA compatibility: 75x75, 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x400 (mm); compatible screen size: 23" to 42"; max weight capacity: 44 lbs..Tilt: 15 degrees down, 15 degrees up.Swivel: 85 degrees.360-degree plate rotation makes the transition between portrait and landscape orientation much easier.Features an anti-theft, lockable TV wall mount.Easy single stud installation with integrated bubble level.Removable VESA plate makes it great for outdoor use.Package includes wall mount, installation hardware, easy-to-follow installation instructions.Supported by manufacturer's limited lifetime warranty

Tripp Lite Full-motion wall mount in black color offers 180 deg swivel for added convenience and has adjustable arm. Durable wall mount increases available desk/table space in office applications..Tilt angle: +/-15 deg.Display size supported: 13" - 27".Device supported: Flat panel display.Material: Metal frame.Mounting location: Wall.Display mount type: Economy.VESA pattern: 75 x 75, 100 x 100.Min/max arm extension: 4.14" min to 15.95" max.Features articulating, 180 deg swivel, scratch resistant, adjustable arm, durable, full motion.Can be used to increase available desk/table space in office applications.Includes DWM1327SE full motion flat-screen wall mount, mounting hardware, owner’s manual.Certifications and standards: RoHS, Green compliant.Weight: 2.66 lbs..Warranty: 5 years limited.Tripp Lite Full-motion wall mount in black color has durable metal frame construction and is ideal for 13" - 27" flat-screen displays up to 33 lbs.

This ADA-compliant full motion TV wall mount blends aesthetic appeal and functionality. Its ultra-slim 1.1" profile allows the mounted display to appear weightlessly suspended like art. This minimalist yet articulating mount offers full motion capabilities for an optimized viewing experience from any angle. Swivel, tilt, and extend the screen with smooth adjustments. Robustly engineered, it securely supports displays up to 90" and supports Up to 132 lbs. This heavy-duty TV mount provides a stable, long-lasting foundation for large-screen TVs and digital signage installations..Our Full motion TV mount is wall-mounted with swivel, tilt, and extension features for effortless functionality..The mount features an adjustable height based on TV size and VESA configuration, with a sleek 1.1" profile when retracted and an extension capability of up to 16.5"..The mount Supports TVs ranging from 43" to 90" with a maximum weight capacity of 132 lbs..Supported by Limited Lifetime Warranty..The product is designed to meet ADA standards, ensuring accessibility without sacrificing style or functionality..Our Mount is engineered with high-quality aluminum and steel, making it ideal for both residential and commercial use..The swivel range of +60° to -60° allows for a wide range of side-to-side adjustments for optimal viewing..VESA Compatibility: 100x200, 200x200, 200x300, 300x200, 200x400, 400x200, 300x300, 300x400, 400x300, 600x200, 400x400, 600x300, 600x400 fitting most TV brands and models..The mount offers an adjustable profile ranging from 1.1 inches to 16.5 inches, allowing for convenient placement and extension..Enjoy a tilt range of +3° to -12°, for customizable viewing angles..Includes all the necessary hardware to seamlessly mount the wall at your desired space..Get the best of both worlds. An ultra-slim mount that can swivel, tilt and extend for a fully customizable viewing experience.

The PDC650 TV mount is specifically designed for inner and outer corner installations. Its two independent wall plates can be mounted to adjacent walls, allowing TVs up to 125 pounds to be safely positioned within a corner. Alternatively, turning the wall plates inwards allows for mounting to an outer edge, column or pillar. Depending on screen size and the distance between the wall plates, the articulating arms offer up to 40° of swivel in either direction. Further improve line-of-sight and reduce glare by tilting your TV 15° forward or 3° backward. The PDC650 also includes cable management clips and wall plate covers to ensure a professional looking setup..SECURE CORNER MOUNTING: Featuring two independent wall plates, the PDC650 allows for TVs weighing up to 125 pounds to be safely mounted to any corner, column or pillar..PAN AND SWIVEL: Swivel the articulating arms up to 40° in either direction to ensure your TV is properly positioned. Note that the range of movement will depend on the size of your TV and the location of the wall plates..ANGLED VIEWING: In order to improve line-of-sight with your TV and reduce glare, the VESA compliant TV brackets can be tilted 15° forward and 3° backward..TIDY SETUP: Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation..EVERYTHING YOU NEED: The PDC650 comes with a convenient bolt box containing all the lag bolts, anchors, washers and spacers you'll need to safely mount your TV.

This recessed TV mount offers the convenience of a traditional wall mount that extends, swivels, and tilts with the clean look of a zero-gap mounting bracket. When not in use, this mount folds out of sight, so your TV looks like a piece of art hanging on your wall. The universal mounting pattern is compatible with all TV brands on the market. Cable management clips conceal your cables against the bracket arms..Supports Screen Size 32-70 Inches.Extension: 26.8" from wall.Weight Capacity: 175 lbs..Tilt: up 5°, down 15°.Swivel: 180°.All Mounting Hardware Included.VESA 200x200, 300x200, 300x300, 400x200, 400x400, 600x200, 600x400.Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

Immerse yourself in an amazing large-screen viewing experience with this Mount-It! TV mount's dynamic full-motion design, ensuring optimal TV positioning. Made of sturdy steel with heavy-duty arms, this mount is tailored for TVs with screens ranging from 60" to 120". Enjoy the flexibility of an extension up to 27.7" from the wall, along with a tool-free tilt range of +5 to -15 degrees and an expansive 120-degree swivel range, allowing you to discover the perfect viewing angle. With a high weight capacity of 264 lbs., this mount guarantees secure and stable TV mounting on wood studs and solid walls. Installation is made effortless and precise with the included mounting template, bubble level, and post-installation leveling feature. VESA compatibility from 200 x 200 to a generous 900 x 600 ensures this wall mount accommodates all large TV sizes..Experience optimal TV positioning with this mount's dynamic full-motion design.Dimensions: 24.8"H x 39.8"W x 3"-27.7"D.Compatible with TVs between 60" and 120" and up to 264 lbs., including those with curved screens.With an extension up to 27.7" from the wall, tool-free tilt between +5 and -15 degrees, and a 120-degree swivel range, you are sure to find the perfect viewing angle.Easy and precise installation in wood studs or solid wall thanks to the included mounting template, bubble level, and the post-installation leveling feature.Safety latches with quick-release system facilitate secure TV attachment and easy removal.VESA compatibility: 200 x 200, 300 x 200, 400 x 200, 300 x 300, 400 x 300, 400 x 400, 600 x 400, 800 x 400, 800 x 600, 900 x 600.Made of high-strength steel and comes in black

The Mount-It! fireplace TV mount was designed to solve the typical problem of installing TVs above the fireplace. Do not underestimate the sleek design of this TV wall mount. It can carry a 37-70" TV screen weighing up to 77 lbs. Though the mount is motor-powered, it moves quietly but fast. The cable management system helps achieve an elegant and clean look while ensuring that no cable accident will happen while you adjust your TV mount..Fireplace TV mount was designed to solve the typical problem of installing TVs above the fireplace.Dimensions: 20.6"H x 25.6"W x 6"-19"D.Compatible with 37"-70" TV screens up to 77 lbs. and VESA patterns from 200 x 100mm to 600 x 400mm.Comes in black.Large weight capacity makes this mount perfect for large-screen TVs.Height-adjustable: lowers up to 22.6".Mounts to a solid wall or double studs with 16" spacing.Position your TV with remote control adjustment.Neatly hide your cables behind your TV with cable clips.Powerful motor for strong, durable, and fast electric adjustment.Tilt: 3 degrees forward/backward.Swivel: up to 25 degrees.1-year manufacturer limited warranty

This Mount-It! full-motion dual-arm TV mount allows you to maximize space by mounting your TV in a corner by utilizing the mount's split dual-arm design. It is perfect for corner mounting, but can be mounted to any flat wall as well. The steel arms ensure your TV will be safely mounted and feature a 66 lb. weight capacity. Its full-motion design features both tilt and swivel functions and can extend and retract while mounted on a flat wall..Full-motion TV mount is perfect for corner mounting, but can be mounted to any flat wall as well.Dimensions: 16.5"H x 17"W x 15.45"D.Compatible with VESA pattern from 100 x 100mm to 400 x 400mm and screens up to 55"; holds up to 66 lbs..Dual split wall brackets are perfect for corner mounting.Full-motion mount can tilt, swivel, and extend for the perfect positioning.Great for corner or flat wall TV mounting.Tilt: 15 degrees down and 2 degrees up.Swivel: 90 degrees.Extension: 4.33" minimum to 16.14" maximum.Package includes: wall mount, installation hardware, easy-to-follow installation instructions.Comes in black.Supported by manufacturer's limited lifetime warranty

Mount your display anywhere with Mount-It! full-motion TV and monitor truss/pole mount. It is a versatile VESA monitor mount that fits displays up to 32" and is great for a wide array of spaces and environments. It is built for outdoor seating areas, garages, boats, retail, stage truss, and a lot more. Its heavy-duty steel construction will keep your display safely mounted and is sure to withstand the test of time..Full-motion truss/pole mount is designed to make it easier to mount your TV or monitor in unusual and unique places.VESA compatibility: 75mm x 75mm to 100mm x 100mm; max weight capacity: 17.6 lbs..Versatile clamping pole mount fits poles from 1.1"Dia. to 2.4"Dia..Great for outdoor seating areas, garages, boats, retail, stages, and more.360-degree rotation makes the transition between portrait and landscape orientation much easier.Features 45 degrees down/45 degrees up tilt and 180 degrees swivel (three swivel joints).Fits up to 32" TVs and monitors.Made of heavy-duty steel, comes in black.Locking screw secures monitor in place.All hardware included.Supported by manufacturer's limited lifetime warranty

This Mount-It! extra-long arm TV mount with full-motion capabilities extends up to 26", allowing you to position your TV perfectly in any setup. With its sturdy long reaching no sag arm extension, it can be mounted conveniently in a corner, allowing you to maximize space. It boasts a load capacity up to 220 lbs., which is plenty to hold most any TV or display on the market. Get the most out of your TV's high definition quality with this versatile television mount..Extra-long arm TV mount with full-motion capabilities to hold almost any TV or display.Compressed dimensions: 2.25"; extended dimensions: 25.75".Compatibility: VESA patterns from 100mm x 100mm to 850mm x 450mm; weight capacity: 220 lbs..Made of heavy-duty cold-rolled steel construction.Full-motion mount can tilt, swivel, and extend for the perfect positioning.TV mount with optimal 15-degree up and down tilt.Swivels 180 degrees to adjust to your viewing needs.Sturdy no sag articulating arm extension, great for corner mounting.Package includes wall mount, integrated bubble level installation hardware, easy-to-follow installation instructions.Supported by manufacturer's limited lifetime warranty

Capable of extending 27.6 inches from the wall, the PS400 full motion TV mount offers unparalleled range of motion for screens as large as 70 inches. Extend your TV out of recessed areas or swivel it up to 180° to reach around corners and accommodate angled seating arrangements. A 14° tilt range also helps to reduce glare and further improve line-of-sight with your TV. Sitting 1.9 inches from the wall when fully retracted, the PS400's low-profile design incorporates plastic wall plate covers and integrated cable management to ensure a professional looking setup..IMPROVED VIEWING: Extending 27.6" from the wall, the articulating arm gives you the freedom to pan, swivel and tilt your TV exactly where you want it..LOW-PROFILE DESIGN: Achieve an exceptionally low-profile setup by pushing your TV back to sit 1.9" from the wall..CLEAN SETUP: Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation..VESA COMPATIBLE: Along with four extension arms for larger TVs, the PS400 ensures compatibility with a wide range of VESA sizes..EVERYTHING YOU NEED: Because every installation is unique, a carefully packaged bolt box is provided, containing all the lag bolts, anchors, washers and spacers you'll need for wood stud and concrete installations.

Kanto PDC650 TV mount is specifically designed for inner and outer corner installations. Its two independent wall plates can be mounted to adjacent walls, allowing TVs up to 125 lbs. to be safely positioned within a corner. Alternatively, turning the wall plates inwards allows for mounting to an outer edge, column or pillar. Depending on screen size and the distance between the wall plates, the articulating arms offer up to 40 degrees of swivel in either direction. Further improve line-of-sight and reduce glare by tilting your TV 15 degrees forward or three degrees backward. The PDC650 also includes cable management clips and wall plate covers to ensure a professional looking setup..Full-motion corner TV mount designed for inner and outer corner installations.Compatible with most 37" to 70" TVs.Made of solid steel with durable black powder-coated finish.Features dual wall plates for flexible corner installations.Suitable for inner and outer corners, as well as pillars and columns.40 degrees of swivel in either direction, depending on screen size and location of the wall plates.Adjustable horizontal leveling and integrated cable management.Comes with a convenient bolt box containing all the lag bolts, anchors, washers, and spacers you'll need to safely mount your TV

The AM95 is a top quality articulating mount has 18 inches of extension, 12 degrees of tilt and allows for lateral shifting. Made to be mounted into double studded walls for extra rigidity, the AM95 holds up to 95 lbs. With unrivaled versatility as a key feature in it's design, it was created to be ADA compliant with a flat depth of only 2 inches. Add a slim display to this mount and you will have a very sleek, against the wall design making it very aesthetically pleasing. Among articulating mounts the AM95's price to value is amazing, especially with the evolution of newer and thinner flat panel displays in use today. Complete install from box to wall is much quicker than most other wall mount models available. Cable management channels are also built into the arm to keep power cables protected when pulling or pushing the display to your desired angle. In addition, an open wall plate allows for clear access to cable and power connections..Low profile swing out collapses to just 2.0" from the wall making it ADA compliant.Single piece construction makes for a quicker install.Scissor style arms pull up to 18" from the wall.12° of downward tilt.Universal mounting pattern up to 600 x 400

The PDX700 full motion wall mount is designed to give you flexibility and peace of mind when mounting TVs as large as 100 inches. Built to meet extensive UL safety requirements, its extra-wide wall plate and heavy-duty articulating arms comfortably support 150 pounds, even at full extension. Swivel your TV to accommodate angled viewing and tilt it to reduce glare and improve line-of-sight when mounting above eye-level. The PDX700 includes a drill template and an assortment of hardware for mounting to brick, concrete or wood-studs up to 24 inches apart. Integrated cable management and wall plate covers are also provided to ensure a clean, professional looking setup..FULL MOTION DESIGN: Heavy-duty articulating arms allow you to safely extend your TV 31.1" from the wall and swivel it up to 90° in either direction, depending on screen size. Maintain a perfect viewing angle wherever you're seated..IMPROVED LINE-OF-SIGHT: Achieve between +15° to -3° of tilt in order to reduce glare and improve line-of-sight when mounting your TV above eye-level. The tilt head can be easily tensioned to allow for on-the-fly adjustments or to lock your TV in place..HASSLE-FREE INSTALLATION: Use the provided drill template to accurately mount your TV to brick, concrete or wood studs up to 24" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers and spacers you'll need for a custom fit installation..SAFETY FIRST: Designed to meet UL safety standards, the PDX700's high-grade steel construction and heavy-duty lag bolts easily support up to 150 lb. Mount up to a 100" TV without hesitation..CLEAN SETUP: In addition to providing a low-profile solution to displaying your TV, the PDX700 comes with wall plate covers and cable management clips to keep your viewing area tidy.

The Mount-It! fireplace TV mount was designed to solve the typical problem of installing TVs above the fireplace. Do not underestimate the sleek design of this TV wall mount, which can carry 37"-70" TV screens up to 77 lbs. Though the mount is motor-powered, it moves quietly and fast. The cable management system helps achieve an elegant and clean look while ensuring that no cable accident will happen while you adjust your TV mount. Bring your TV down over your fireplace mantel when it's time to watch, and conveniently move it back at the push of a button..Make perfect use of the space above your fireplace with this motorized TV mount.Fits most 37"-70" TVs up to 77 lbs..Tilt and swivel features help achieve the perfect viewing angle.Tilt: -3 degrees (manual adjustment, not motorized); swivel: +/- 25 degrees (manual adjustment, not motorized); leveling: -3 degrees (manual adjustment, not motorized).Convenient remote-controlled height adjustment (height range: up to 22.6").High weight capacity makes this mount perfect for large-screen TVs.VESA compatibility: 200 x 100, 200 x 200, 300 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400, 600 x 400.Mounts to standard 16" studs.Comes in white

The Kanto SDX600 full motion TV mount features anti-theft TV arms and screws that make TV removal difficult without the included tool. The anti-tamper tilt mechanism also helps prevent unauthorized tilt setting changes. The SDX600 mount is compatible with most TVs up to 65 inches with a VESA pattern between 100x100 and 400x400. The full motion dual articulating arms can extend up to 17-inches from the wall while the swivel and discreet 0-, +6-, and +12-degree tilt positions reduce glare and allow maneuvering for the best line-of-sight..ANTI-THEFT TV ARMS AND SCREWS: The screws have a specialized head that only the included tool will be able to tighten and loosen. Feel confident that your TV will be safe and secure..SECURE TILT MECHANISM: There are three discreet tilt positions, 0, +6, and +12 degrees, and an anti-theft mechanism that makes it difficult for the public to alter your TV's tilt settings without the included tool..ENHANCED TV VIEWING: Get the best possible viewing angle. Full-motion maneuverability makes it a breeze to extend, swivel, and tilt TVs that are up to 65 inches..LOW-PROFILE DESIGN: When retracted, the SDX600 allows you to get your TV to sit 2.6" from the wall, so it's less in the way. The stylish design makes it ideal for thinner TVs, like OLEDs..CABLE MANAGEMENT SYSTEM: Keep AV and TV cables out of sight with the integrated cable channels. A nice clean setup creates an aesthetically pleasing viewing area.

The MegaMounts full motion wall mount with bubble level for easy centering fits 32" - 70" Plasma/LCD/LED TV securely. This mount is a space saver as it contrasts when not in use and upon extending from wall up to 17 1/2", swivels left to right and tilts up and down. This mount with a holding capacity of 100 lbs, is a great companion to our shelf wall mounts and helps to keep cords off floor. The mount comes with mounting hardware..TV mount holds DVD players and gaming consoles securely.Extend from wall up to 17 1/2".Comes in black color

The 37"-70" Large Articulating Mount by Stanley is built for quality, performance and durability. It is designed and built for TVs 37"-70" and holds up to 100 pounds. It features retracking to 3" and extension to 14 degree with post level install, full swivel and 20 degree tilt. Mount your TV for optimal visibility and simplicity with the Large Articulating Mount..Fits 37"-70" TVs.Holds 100lbs.Articulating.600 x 400 max VESA pattern.Retracts to 3" & extends to 14".Tilts 20 degree & swivels.Post-install leveling.Integrated cable covers for clean & neat install

R400 is a mount made for Pro's featuring a true no gap installation that allows your TV to sit perfectly flush against your wall for the ultimate low-profile look. Thin TVs like OLED appear to float like a picture frame with no visible hardware. With a recessed box that sits in-between studs, you can store streaming boxes and other small electronic accessories out of sight. Metal knockouts allow you to easily run a power outlet into the box, while rubber grommets handle all other cabling for a completely in-wall, wire-free experience. Durable metal cable management clips on the articulating arms take care of messy cables when the TV is pulled out to its full 18" of extension..The recessed in-wall TV mount features a full-motion articulating arm that extends, swivels, and tilts, allowing your TV to sit flush against the wall for a sleek, low-profile look while offering flexible positioning for optimal viewing angles..The mount measures of 13.3 inches in height, 14.3 inches in width, and 3.5 inches in depth..Supports most 35 to 65-inch flat-panel TVs, holds up to 80 lbs. (36 kg), and accommodates VESA sizes from 100x100 to 400x400..R400 is a true zero gap TV mount that allows TVs with a VESA pattern of 300×300 or less to sit directly against the wall for a completely flush look..400×400 VESA patterns are supported with provided extensions. Using these only increases the profile to 0.3".The recessed box is deep enough to store streaming boxes and other small AV accessories behind the TV for a clean, modern setup..A foldable, in-wall template for new construction can be temporarily placed between studs letting contractors plan cabling and drywall while the mount sits safely in its packaging until needed..Metal knock-outs allow for the installation of power outlets inside the box so you can keep everything needed to power your equipment within the wall..Metal cable management clips run along the length of the articulating arm while rubber grommets within the box help you to route your cabling without any mess..Comes with a 10 years limited warranty.

Mount your display anywhere with Mount-It! MI-390. This pole mount is designed to make it easier to mount your TV or monitor in unusual and unique places. It is a versatile VESA monitor mount that fits displays up to 32" and is great for a wide array of spaces and environments. It is built for outdoor seating areas, garages, boats, retail, stage truss, and a lot more. Tilts, swivels, and rotates to create a better view. Its heavy-duty steel construction will keep your display safely mounted and is sure to withstand the test of time..Truss/pole mount is great for indoor as well as outdoor seating areas, garages, boats, retail, stages, and more.VESA compatibility: 75mm x 75mm and 100mm x 100mm; max weight capacity: 17.6 lbs..Versatile clamping pole mount fits poles from 1.1"Dia. to 2.4"Dia..360-degree rotation makes the transition between portrait and landscape orientation much easier.Features 45 degrees down/45 degrees up tilt and 180 degrees swivel.Fits up to 32" TVs and monitors.Made of heavy-duty steel, comes in black.Locking screw secures monitor in place.All hardware included.Supported by manufacturer's limited lifetime warranty

Capable of extending 27.6" from the wall, Kanto PS400 full motion TV mount offers unparalleled range of motion for screens as large as 70". Extend your TV out of recessed areas or swivel it up to 180 degrees to reach around corners and accommodate angled seating arrangements. A 14 degrees tilt range also helps to reduce glare and further improve line-of-sight with your TV. Sitting 1.9" from the wall when fully retracted, the PS400's low-profile design incorporates plastic wall plate covers and integrated cable management to ensure a professional looking setup..Full-motion TV mount offers unparalleled range of motion for screens as large as 70".Compatible with most 30" to 70" TVs.Made of solid steel with durable powder-coated finish in black.Extending 27.6" from the wall, the articulating arm gives you the freedom to pan, swivel, and tilt your TV exactly where you want it.Achieve an exceptionally low-profile setup by pushing your TV back to sit 1.9" from the wall.Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation.Because every installation is unique, a carefully packaged bolt box is provided, containing all the lag bolts, anchors, washers, and spacers you'll need for wood stud and concrete installations

The MegaMounts full motion wall mount bundle with bubble level for easy centering fits 32" - 70" Plasma/LCD/LED TV securely. This mount is a space saver as it contrasts when not in use and upon extending from wall up to 17 1/2", swivels left to right and tilts up and down. This mount with a holding capacity of 100 lbs, is a great companion to our shelf wall mounts and helps to keep cords off floor. The mount comes with mounting hardware and HDMI cable..TV mount with HDMI cable holds DVD players and gaming consoles securely.Extend from wall up to 17 1/2".Comes in black color.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Mount-It! Camper RV Articulating TV Wall Mount is specifically designed to keep your TV safely stowed away while your motorhome, vehicle or boat is moving. When you've reached your destination and are ready to kick back for a movie, simply pull down on the quick release loop, and extend the cantilever arm. This heavy-duty steel frame supports up to 77 lbs and the VESA extender plates accommodate larger TVs from 23 to 55 inch screen sizes. The detachable VESA head bracket makes it convenient to remove the entire TV for long term storage..TV SIZE RANGE: 23" to 55" LED LCD PLASMA TVs.LOCKABLE ARM: Locks for transportation.EXTENSION: 2.3" to 15.7".TILT: +10/- degrees.SWIVEL: +/- 90 degrees.VESA COMPATIBILITY: 75x75,100x100,200x100,200x200,300x300,400x200,400x400 (mm).Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

This Mount-It! TV mount is your perfect solution for mounting your TV above a fireplace. With a maximum height of 24.8" (7.25" adjustment range), you can pull your TV down to a comfortable viewing height and then put it back in place when you're done. The spring mechanism offers a counterbalance to the weight of the TV, allowing it to be lowered and raised with the touch of a finger. Swivel, tilt, and level features help you precisely align your TV..Pull-down fireplace TV mount designed to solve the typical problem of installing TVs above the fireplace.Dimensions: 16.5"-24.8"H x 25.25"W x 23"D (arm extension from the wall).This sturdy, durable, and versatile TV mount holds TVs weighing up to 72 lbs. with screen sizes between 43" and 70".Maximum height of 24.8" (7.25" adjustment range) allows you to lower your TV over your fireplace mantel to your desired viewing position.Height adjusts with a soft-touch foam handle.Swivels (+/-30 degrees), levels, and comes with cable management clips.Tilts up to -9 degrees when pushed up and up to -3 degrees when pulled down.VESA compatibility: 200 x 200, 300 x 300, 300 x 200, 400 x 200, 400 x 300, 400 x 400, and 600 x 400.Made of durable metal and comes in black

The Mount-It! RV Camper TV mount is designed to provide secure and stable TV installation in RVs, mobile homes, boats, and other dynamic-use applications. Two wall plates are included, so you can move your TV between two locations without having to remove the VESA mounting brackets. Tilt your TV up or down to reduce glare, and swivel left or right to maximize the line of sight..TV mount designed to provide secure and stable TV installation in RVs, mobile homes, boats, and other dynamic use applications.Fits TVs with VESA patterns from 75 x 75mm to 200 x 200mm, and holds up to 33 lbs..Comes in black.Vesa compatible: 75 x 75mm, 100 x 100mm, 200 x 100mm, and 200 x 200mm.Can be tilted up to 30 degrees and swiveled up to 60 degrees.Two wall plates allow you to mount your TV in two locations.Bubble level ensures alignment during installation.Side-in bracket makes installation and removal easy.Cable hook keeps cables neat and out of the way.Supported by manufacturer's limited lifetime warranty

Mount-It! Camper RV Articulating TV Wall Mount is specifically designed to keep your TV safely stowed away while your motorhome, vehicle or boat is moving. This mount can tilt, swivel, extend, and retract to be positioned in almost any viewing angle. This heavy-duty steel frame supports up to 77 lbs and the VESA extender plates accommodate larger TVs from 23 to 43 inch screen sizes. The detachable VESA head bracket makes it convenient to remove the entire TV for long term storage..TV SIZE RANGE: 23" to 43" LED LCD PLASMA TVs.LOCKABLE ARM: Locks for transportation.EXTENSION: 2.3" to 15.7".TILT: +10/- degrees.SWIVEL: +/- 90 degrees.VESA COMPATIBILITY: 75x75,100x100,200x100,200x200 (mm).Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

The Pro Series 37"-70" Extension Mount by Stanley is designed for quality, performance and dependability. It is designed and built for most of the lighter but large screens. It is easily adjusted without complicated tools or screws and features integrated cable covers. It has a full 180 degree swivel with a 15 degree tilt and fits 37"-70" TVs..Fits 37"-70" TVs.Holds up to 90lbs.Retracts 3" & extends 19".Tilts 15 degree , swivels 180 degree.VESA pattern compatible up to 600 x 400.Integrated cable covers for clean install.Post-level install capabilities

Capable of supporting panels up to 120”, PMX800 adjustable wall mount can be horizontally offset 11” in either direction to dial in the lateral placement of your display. An oversized 900×600 VESA interface improves compatibility with extra-large touch screens and provides flexibility for vertical positioning. With 31.3” of extension, this full motion wall mount gives you all the swivel needed to get the perfect viewing angle. Its low-profile design allows your TV to sit 2.6” from the wall when fully retracted and features all-metal cable management and lag bolt covers to stand the test of time. Toolless tilt rounds off PMX800’s extensive feature set allowing for on-the-fly adjustments..This is a Articulating Wall Mount..Dimensions of this mount are (HxWxD) 25" x 37.8" x 2.6" (31.3 inches when fully extended).Supports TVs from 55 to 120 inches, up to 200 lbs..It comes with a 10 years warranty..Horizontal Offset Provides up to 11 inches of horizontal adjustment in either direction, allowing for precise TV placement even if studs are not ideally positioned.Durability Constructed with high-quality steel for long-lasting strength and stability.Don’t let the size of your TV dictate where you put it.

The TE300 extendable tilting TV mount offers the simplicity of a tilt mount with none of the drawbacks. TE300 eliminates the need to plan cabling in advance by pulling away from the wall up to 6" providing easy access to the back of your TV. This extension allows TE300 to pan 8 degrees to left or right, while 12 degrees of forward tilt and 2 degrees backward tilt help avoid glare and improve visibility when mounted above eye level. To ensure perfect TV placement, oversized TV brackets let you adjust your TV vertically while the wide, open-frame wall bracket provides horizontal adjustment and an area to route cables. Capable of supporting up to 150 lbs., any TV between 43" and 90" can mount safely and securely to the TE300 tilting TV mount..EASY INPUT ACCESS: 6" of extension lets you access cables at the rear of your TV: something standard tilt mounts can't do. A spacious open wall plate allows you to mount over electrical outlets or media boxes for clean cable routing..ENHANCED VISIBILITY: The design of TE300 tilting TV mount lets you pan your TV up to 8 degrees left or right. With the ability to tilt forward 12 degrees or backward 2 degrees you'll be able to position your TV perfectly for comfortable viewing..EASY INSTALLATION: Simply screw two brackets to your TV, secure the wall plate to the studs in your wall, and hang your TV. Because you have easy access to the back of your TV at any time, managing cables is a simple task..PERFECT PLACEMENT: Nail your TVs placement with oversized TV brackets that let you adjust your TV vertically and a wide wall plate for horizontal adjustment. Post installation leveling is included for a professional looking finished result..SUPERIOR MOUNTING EXPERIENCE: TE300 extend and tilt tv mount comes with a highly organized hardware kit, and drill template with dust catcher for a hassle-free TV mount installation.