Tilt And Swivel TV Wall Mounts

Relieve neck and back pain while freeing up desk space by mounting your monitor on the wall. This Mount-It! single-monitor wall mount can tilt, swivel, and rotate for versatile positioning. It features a gas-spring arm for effortless height adjustment and includes integrated in-arm cable management for a neat and organized appearance. Installation is easy with a single-stud wall plate and detachable VESA bracket. The sturdy aluminum and high-strength steel construction will stand the test of time. Turn the hexagonal bolt at the base of the gas-spring arm to adjust the tension to hold the monitor in place..Single-monitor wall mount helps you adjust your monitor to fit your needs.Fits monitors up to 32".Gas-spring arm allows for effortless height adjustment up to 11".Made of aluminum, steel, and plastic; comes in black.Tilt angle: +/-35 degrees; swivel: +/-180 degrees; rotation: +/-180 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Rotate between portrait and landscape orientation with ease.In-arm cable slots keep your space organized.Installing your monitor is quick and easy with a detachable plate.Extension from wall: 3.9"-20.5".Maximum weight capacity: 17.6 lbs..Supported by manufacturer's limited lifetime warranty

Kanto PDC650 TV mount is specifically designed for inner and outer corner installations. Its two independent wall plates can be mounted to adjacent walls, allowing TVs up to 125 lbs. to be safely positioned within a corner. Alternatively, turning the wall plates inwards allows for mounting to an outer edge, column or pillar. Depending on screen size and the distance between the wall plates, the articulating arms offer up to 40 degrees of swivel in either direction. Further improve line-of-sight and reduce glare by tilting your TV 15 degrees forward or three degrees backward. The PDC650 also includes cable management clips and wall plate covers to ensure a professional looking setup..Full-motion corner TV mount designed for inner and outer corner installations.Compatible with most 37" to 70" TVs.Made of solid steel with durable black powder-coated finish.Features dual wall plates for flexible corner installations.Suitable for inner and outer corners, as well as pillars and columns.40 degrees of swivel in either direction, depending on screen size and location of the wall plates.Adjustable horizontal leveling and integrated cable management.Comes with a convenient bolt box containing all the lag bolts, anchors, washers, and spacers you'll need to safely mount your TV

The PDX700 full motion wall mount is designed to give you flexibility and peace of mind when mounting TVs as large as 100 inches. Built to meet extensive UL safety requirements, its extra-wide wall plate and heavy-duty articulating arms comfortably support 150 pounds, even at full extension. Swivel your TV to accommodate angled viewing and tilt it to reduce glare and improve line-of-sight when mounting above eye-level. The PDX700 includes a drill template and an assortment of hardware for mounting to brick, concrete or wood-studs up to 24 inches apart. Integrated cable management and wall plate covers are also provided to ensure a clean, professional looking setup..FULL MOTION DESIGN: Heavy-duty articulating arms allow you to safely extend your TV 31.1" from the wall and swivel it up to 90° in either direction, depending on screen size. Maintain a perfect viewing angle wherever you're seated..IMPROVED LINE-OF-SIGHT: Achieve between +15° to -3° of tilt in order to reduce glare and improve line-of-sight when mounting your TV above eye-level. The tilt head can be easily tensioned to allow for on-the-fly adjustments or to lock your TV in place..HASSLE-FREE INSTALLATION: Use the provided drill template to accurately mount your TV to brick, concrete or wood studs up to 24" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers and spacers you'll need for a custom fit installation..SAFETY FIRST: Designed to meet UL safety standards, the PDX700's high-grade steel construction and heavy-duty lag bolts easily support up to 150 lb. Mount up to a 100" TV without hesitation..CLEAN SETUP: In addition to providing a low-profile solution to displaying your TV, the PDX700 comes with wall plate covers and cable management clips to keep your viewing area tidy.

The AM95 is a top quality articulating mount has 18 inches of extension, 12 degrees of tilt and allows for lateral shifting. Made to be mounted into double studded walls for extra rigidity, the AM95 holds up to 95 lbs. With unrivaled versatility as a key feature in it's design, it was created to be ADA compliant with a flat depth of only 2 inches. Add a slim display to this mount and you will have a very sleek, against the wall design making it very aesthetically pleasing. Among articulating mounts the AM95's price to value is amazing, especially with the evolution of newer and thinner flat panel displays in use today. Complete install from box to wall is much quicker than most other wall mount models available. Cable management channels are also built into the arm to keep power cables protected when pulling or pushing the display to your desired angle. In addition, an open wall plate allows for clear access to cable and power connections..Low profile swing out collapses to just 2.0" from the wall making it ADA compliant.Single piece construction makes for a quicker install.Scissor style arms pull up to 18" from the wall.12° of downward tilt.Universal mounting pattern up to 600 x 400

The Mount-It! fireplace TV mount was designed to solve the typical problem of installing TVs above the fireplace. Do not underestimate the sleek design of this TV wall mount, which can carry 37"-70" TV screens up to 77 lbs. Though the mount is motor-powered, it moves quietly and fast. The cable management system helps achieve an elegant and clean look while ensuring that no cable accident will happen while you adjust your TV mount. Bring your TV down over your fireplace mantel when it's time to watch, and conveniently move it back at the push of a button..Make perfect use of the space above your fireplace with this motorized TV mount.Fits most 37"-70" TVs up to 77 lbs..Tilt and swivel features help achieve the perfect viewing angle.Tilt: -3 degrees (manual adjustment, not motorized); swivel: +/- 25 degrees (manual adjustment, not motorized); leveling: -3 degrees (manual adjustment, not motorized).Convenient remote-controlled height adjustment (height range: up to 22.6").High weight capacity makes this mount perfect for large-screen TVs.VESA compatibility: 200 x 100, 200 x 200, 300 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400, 600 x 400.Mounts to standard 16" studs.Comes in white

The MegaMounts full motion wall mount with bubble level for easy centering fits 32" - 70" Plasma/LCD/LED TV securely. This mount is a space saver as it contrasts when not in use and upon extending from wall up to 17 1/2", swivels left to right and tilts up and down. This mount with a holding capacity of 100 lbs, is a great companion to our shelf wall mounts and helps to keep cords off floor. The mount comes with mounting hardware..TV mount holds DVD players and gaming consoles securely.Extend from wall up to 17 1/2".Comes in black color

Mounting your TV in a corner can be a great way to deal with limited wall space or angled seating arrangements. While some full motion mounts achieve this by being installed on near-by studs, the FMC1's unique 90° wall plate can be mounted squarely in a corner, ensuring a perfectly centered setup with far more flexibility. Suitable for wood stud and concrete walls, the FMC1 features a telescoping support arm that provides adequate space for TVs as large as 60 inches. It's also capable of swiveling left and right, allowing your TV to be pushed up against adjacent walls, and tilting forwards and backwards to reduce glare and improve line-of-sight with your screen..SUPPORTS 88 POUNDS: Constructed out of steel, the FMC1 safely supports 40" to 60" TVs weighing up to 88 pounds, and features adjustable mounting brackets to accommodate VESA sizes from 100a-100 to 600a-400..SIMPLE CORNER INSTALLATION: Unlike other full motion mounts, the FMC1's unique 90° wall plate can be mounted squarely in the corner of any wood stud or concrete wall. Its contoured design ensures each lag bolt can be properly secured, regardless of how your studs are configured..TELESCOPING ARM: The FMC1's telescoping support arm extends 20.4" to 29.8" from the corner, providing enough space for TVs as large as 60"..SWIVELS LEFT AND RIGHT: When sufficiently extended, this full motion TV mount is capable of swivelling up to 90° left and right. This allows you to place your TV against the adjacent walls, or to make simple adjustments to your viewing angle..16° OF TILT: The FMC1 tilts 10° forwards and 6° backwards to reduce glare and improve line-of-sight with your TV..EVERYTHING YOU NEED: Along with a clearly labeled bolt pack, the FMC1 comes with cable management straps and a wall plate cover to keep your viewing area tidy. A step-by-step video is also provided to help you through every step of your instalation.

The Chief Fusion flat panel ceiling mounts offer perfect TV positioning and flexible adjustments for large flat panel screens and is a great solution for digital signage installations. Effortlessly adjust display with Centris fingertip tilt technology and set display with four set locking points to eliminate guess work when installing multiple displays. Enjoy increased flexibility with mount swivels for your preferred viewing angle..The Chief Fusion Large Flat Panel Ceiling Mount (LCM1U) is a Tilt and Swivel Ceiling Mounting System. This type of mount is designed to securely hold large flat panel screens from the ceiling, offering flexible adjustments including tilt and swivel capabilities..The dimensions of the Ceiling Mount are approximately 16 inches (H) x 26.81 inches (W) x 6.37 inches (D).The Chief Fusion Large Flat Panel Ceiling Mount (LCM1U) has the following capacity and compatibility specifications: Weight Capacity Can hold displays up to 125 pounds (56.7 kg). Display Size Compatibility Supports displays ranging from 42 to 75 inches.It comes with a 10 years warranty..Compatibility with Traditional and CPA Pinned Ceiling Plates: Works with both traditional 1.5" NPT and new CPA pinned ceiling plates and column systems.Tool-Free Screen Engagement: Ensures simple and secure display attachment with optional padlock security

Combining H-Frame mounting arms with a single stud wall plate, PS350 is the new standard in Full Motion Mounts. SUPPORTS UP TO 88 POUNDS: With its solid steel construction, the PS350 is designed to hold up to 88 pounds. EXTENDS UP TO 22 INCHES: The PS350 extends 22" from the wall to give you a variety of viewing options. CLEAN FINISH: The PS350 is made of solid steel with a durable powder coated finish - giving you a sophisticated look and feel. TILT MECHANISM: With 12° of forward tilt and 2° of backwards tilt, the PS350 makes it easy to angle your TV just the way you want it. LOW PROFILE DESIGN: When pushed back into place, your TV sits less than 2" from the wall. VESA SIZES TO 600×400: The adjustable H-frame mounting brackets allow the PS350 to accommodate VESA sizes ranging from 200×75 to 600×400 SWIVELS UP TO 180 DEGREES: The two extension arms allow you to swivel the TV up to 180°, depending on TV size. When pushed back against the wall, note that the center of the TV plate is centered with the wall mount. MAGNETIC COVERS: Magnetic covers attach to the wall plate to give you a clean, modern look. SLEEK CABLE MANAGEMENT: An integrated cable management system allows you to route your power and video cables neatly between the TV and the wall. EVERYTHING YOU NEED: Because every installation is unique, PS350's are carefully packaged with all the lag bolts, anchors, mounting bolts, washers and spacers that you could need. Everything is labeled with clear instructions that correspond with the manuals in order to simplify your installation. WHITE CABLE SLEEVE (WHITE MODEL ONLY): For a more discreet appearance, the white model comes with a white cable sleeve to match the surrounding area..Tilt: +12° to -2°.Swivel: 180° at full extension (with 37" TV).Extension: 22" (56.1 cm) from the wall.Raised bezel screen protection

Free up space by mounting your monitor, and adjust its position easily with this pivoting wall mount. Wall-mount your computer monitor or flat-screen TV to free up space on your desk or table. This monitor wall mount supports displays up to 27". It swivels and tilts to enable you to adjust the angle of your screen and provide viewing flexibility. Save space by wall-mounting your flat-panel display. The monitor wall mount helps you save space on your desk or table surface, by letting you securely wall-mount a computer monitor or LED / LCD TV from 13" to 27" (330 to 686 mm) in size and up to 33 lb. (15kg) in weight. It's ideal for many different applications, including business meeting rooms, healthcare or financial settings. The monitor wall mount works well in office settings or workspaces that back against a wall. Adjust your screen position with ease. The monitor wall mount makes it easy to change your screen position, so you can work more comfortably. It swivels +45° / - 45°, enabling you to move your screen easily to the left or right. It also tilts freely +45° / - 45°, which makes it easy to adjust the angle of your display up or down. Easy installation. The aluminum monitor wall mount features slide-in wall plate construction for easy installation. To help keep your work area free of clutter, the monitor arm also features a cable clip that keep your cables neatly out of sight. The ARMWALL is backed by a StarTech.com 2-year warranty and free lifetime technical support..Mount your monitor or flat-screen TV on a wall to save space and easily share your screen.Supports a 13'' - 27'' monitor up to 33 lb. (15 kg).Swivels +45° / - 45° to provide viewing flexibility

The 37"-70" Large Articulating Mount by Stanley is built for quality, performance and durability. It is designed and built for TVs 37"-70" and holds up to 100 pounds. It features retracking to 3" and extension to 14 degree with post level install, full swivel and 20 degree tilt. Mount your TV for optimal visibility and simplicity with the Large Articulating Mount..Fits 37"-70" TVs.Holds 100lbs.Articulating.600 x 400 max VESA pattern.Retracts to 3" & extends to 14".Tilts 20 degree & swivels.Post-install leveling.Integrated cable covers for clean & neat install

Mount-It! MI-4211 articulating arm makes a great space saver and organizer for your home or work place.Can hold 13" to 27" displays.Supports up to 44 lbs..Heavy-duty, height adjustable, 45 degree rotation, and a 15 degree tilt.ideal for ceilings, bedrooms, offices, kitchens, and workspaces.Can hold 13" – 27" displays.Supports up to 44 lbs..Supported by manufacturer's limited lifetime warranty

R400 is a mount made for Pro's featuring a true no gap installation that allows your TV to sit perfectly flush against your wall for the ultimate low-profile look. Thin TVs like OLED appear to float like a picture frame with no visible hardware. With a recessed box that sits in-between studs, you can store streaming boxes and other small electronic accessories out of sight. Metal knockouts allow you to easily run a power outlet into the box, while rubber grommets handle all other cabling for a completely in-wall, wire-free experience. Durable metal cable management clips on the articulating arms take care of messy cables when the TV is pulled out to its full 18" of extension..The recessed in-wall TV mount features a full-motion articulating arm that extends, swivels, and tilts, allowing your TV to sit flush against the wall for a sleek, low-profile look while offering flexible positioning for optimal viewing angles..The mount measures of 13.3 inches in height, 14.3 inches in width, and 3.5 inches in depth..Supports most 35 to 65-inch flat-panel TVs, holds up to 80 lbs. (36 kg), and accommodates VESA sizes from 100x100 to 400x400..R400 is a true zero gap TV mount that allows TVs with a VESA pattern of 300×300 or less to sit directly against the wall for a completely flush look..400×400 VESA patterns are supported with provided extensions. Using these only increases the profile to 0.3".The recessed box is deep enough to store streaming boxes and other small AV accessories behind the TV for a clean, modern setup..A foldable, in-wall template for new construction can be temporarily placed between studs letting contractors plan cabling and drywall while the mount sits safely in its packaging until needed..Metal knock-outs allow for the installation of power outlets inside the box so you can keep everything needed to power your equipment within the wall..Metal cable management clips run along the length of the articulating arm while rubber grommets within the box help you to route your cabling without any mess..Comes with a 10 years limited warranty.

Mount your display anywhere with Mount-It! MI-390. This pole mount is designed to make it easier to mount your TV or monitor in unusual and unique places. It is a versatile VESA monitor mount that fits displays up to 32" and is great for a wide array of spaces and environments. It is built for outdoor seating areas, garages, boats, retail, stage truss, and a lot more. Tilts, swivels, and rotates to create a better view. Its heavy-duty steel construction will keep your display safely mounted and is sure to withstand the test of time..Truss/pole mount is great for indoor as well as outdoor seating areas, garages, boats, retail, stages, and more.VESA compatibility: 75mm x 75mm and 100mm x 100mm; max weight capacity: 17.6 lbs..Versatile clamping pole mount fits poles from 1.1"Dia. to 2.4"Dia..360-degree rotation makes the transition between portrait and landscape orientation much easier.Features 45 degrees down/45 degrees up tilt and 180 degrees swivel.Fits up to 32" TVs and monitors.Made of heavy-duty steel, comes in black.Locking screw secures monitor in place.All hardware included.Supported by manufacturer's limited lifetime warranty

Capable of extending 27.6" from the wall, Kanto PS400 full motion TV mount offers unparalleled range of motion for screens as large as 70". Extend your TV out of recessed areas or swivel it up to 180 degrees to reach around corners and accommodate angled seating arrangements. A 14 degrees tilt range also helps to reduce glare and further improve line-of-sight with your TV. Sitting 1.9" from the wall when fully retracted, the PS400's low-profile design incorporates plastic wall plate covers and integrated cable management to ensure a professional looking setup..Full-motion TV mount offers unparalleled range of motion for screens as large as 70".Compatible with most 30" to 70" TVs.Made of solid steel with durable powder-coated finish in black.Extending 27.6" from the wall, the articulating arm gives you the freedom to pan, swivel, and tilt your TV exactly where you want it.Achieve an exceptionally low-profile setup by pushing your TV back to sit 1.9" from the wall.Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation.Because every installation is unique, a carefully packaged bolt box is provided, containing all the lag bolts, anchors, washers, and spacers you'll need for wood stud and concrete installations

The MegaMounts full motion wall mount bundle with bubble level for easy centering fits 32" - 70" Plasma/LCD/LED TV securely. This mount is a space saver as it contrasts when not in use and upon extending from wall up to 17 1/2", swivels left to right and tilts up and down. This mount with a holding capacity of 100 lbs, is a great companion to our shelf wall mounts and helps to keep cords off floor. The mount comes with mounting hardware and HDMI cable..TV mount with HDMI cable holds DVD players and gaming consoles securely.Extend from wall up to 17 1/2".Comes in black color.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Mount-It! Camper RV Articulating TV Wall Mount is specifically designed to keep your TV safely stowed away while your motorhome, vehicle or boat is moving. When you've reached your destination and are ready to kick back for a movie, simply pull down on the quick release loop, and extend the cantilever arm. This heavy-duty steel frame supports up to 77 lbs and the VESA extender plates accommodate larger TVs from 23 to 55 inch screen sizes. The detachable VESA head bracket makes it convenient to remove the entire TV for long term storage..TV SIZE RANGE: 23" to 55" LED LCD PLASMA TVs.LOCKABLE ARM: Locks for transportation.EXTENSION: 2.3" to 15.7".TILT: +10/- degrees.SWIVEL: +/- 90 degrees.VESA COMPATIBILITY: 75x75,100x100,200x100,200x200,300x300,400x200,400x400 (mm).Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

This Mount-It! TV mount is your perfect solution for mounting your TV above a fireplace. With a maximum height of 24.8" (7.25" adjustment range), you can pull your TV down to a comfortable viewing height and then put it back in place when you're done. The spring mechanism offers a counterbalance to the weight of the TV, allowing it to be lowered and raised with the touch of a finger. Swivel, tilt, and level features help you precisely align your TV..Pull-down fireplace TV mount designed to solve the typical problem of installing TVs above the fireplace.Dimensions: 16.5"-24.8"H x 25.25"W x 23"D (arm extension from the wall).This sturdy, durable, and versatile TV mount holds TVs weighing up to 72 lbs. with screen sizes between 43" and 70".Maximum height of 24.8" (7.25" adjustment range) allows you to lower your TV over your fireplace mantel to your desired viewing position.Height adjusts with a soft-touch foam handle.Swivels (+/-30 degrees), levels, and comes with cable management clips.Tilts up to -9 degrees when pushed up and up to -3 degrees when pulled down.VESA compatibility: 200 x 200, 300 x 300, 300 x 200, 400 x 200, 400 x 300, 400 x 400, and 600 x 400.Made of durable metal and comes in black

The Mount-It! RV Camper TV mount is designed to provide secure and stable TV installation in RVs, mobile homes, boats, and other dynamic-use applications. Two wall plates are included, so you can move your TV between two locations without having to remove the VESA mounting brackets. Tilt your TV up or down to reduce glare, and swivel left or right to maximize the line of sight..TV mount designed to provide secure and stable TV installation in RVs, mobile homes, boats, and other dynamic use applications.Fits TVs with VESA patterns from 75 x 75mm to 200 x 200mm, and holds up to 33 lbs..Comes in black.Vesa compatible: 75 x 75mm, 100 x 100mm, 200 x 100mm, and 200 x 200mm.Can be tilted up to 30 degrees and swiveled up to 60 degrees.Two wall plates allow you to mount your TV in two locations.Bubble level ensures alignment during installation.Side-in bracket makes installation and removal easy.Cable hook keeps cables neat and out of the way.Supported by manufacturer's limited lifetime warranty

Introducing the R600 Recessed In-Wall TV Mount, the ultimate solution for a clean and sleek home entertainment setup. Designed to accommodate TVs ranging from 65” to 90” and weighing up to 135 lbs, this mount offers a true zero gap installation, ensuring your TV sits flush against the wall for a polished look. Featuring an oversized in-wall box, the R600 allows for convenient storage of cable set-top boxes and TV breakout boxes, all neatly concealed behind your TV. The durable metal cable management clips and rubber grommets keep your cables organized and out of sight, creating a clutter-free environment. With an easy-to-use drywall template for new constructions and metal knockouts for power outlet installation, the R600 makes the installation process seamless for contractors. Its foldable design keeps the mount safe until you're ready to finish your project. Elevate your viewing experience with the R600, where style meets functionality!.The type of mount or mounting system for the R600 is a Recessed In-Wall Mount. This system is designed to be installed within the wall, allowing for a flush and sleek appearance while accommodating a variety of TV sizes and weights..The dimensions of the mount are 18 inches in height, 36.8 inches in width, and 5.7 inches in depth..The R600 Recessed In-Wall TV Mount is compatible with TVs ranging from 65 inches to 90 inches and supports a maximum weight capacity of 135 pounds..The Mount comes with a limited 10-year manufacturer warranty, ensuring peace of mind for your investment..Versatile VESA Compatibility supports a wide range of VESA patterns from 100x100 to 800x600, accommodating various TV sizes from 65” to 90” for flexible installation options.Heavy-Duty Construction is engineered to hold TVs weighing up to 135 lbs (61 kg), ensuring reliable support and durability for your entertainment system.Sleek, Low-Profile Design achieves a clean and modern aesthetic with a zero-gap profile that allows TVs to sit flush against the wall, creating a seamless look in any room.Efficient Cable Management features built-in cable management clips and rubber grommets to keep cords organized and out of sight, minimizing clutter and enhancing visual appeal.Easy Installation comes with a drywall template and in-wall template for straightforward mounting, allowing contractors to easily plan cable routing and drywall placement.Flexible Tilt and Swivel offers +10° to -2° tilt and 90° swivel capabilities for optimal viewing angles, ensuring your TV is positioned perfectly for any seating arrangement.Removable Accessory Plate simplifies the connection of TV breakout boxes or other accessories, providing convenient access and organization within the recessed box.Power Outlet Integration allows for easy installation of power outlets inside the mount, enabling you to power your devices directly from within the wall for a clean setup

Mount-It! Camper RV Articulating TV Wall Mount is specifically designed to keep your TV safely stowed away while your motorhome, vehicle or boat is moving. This mount can tilt, swivel, extend, and retract to be positioned in almost any viewing angle. This heavy-duty steel frame supports up to 77 lbs and the VESA extender plates accommodate larger TVs from 23 to 43 inch screen sizes. The detachable VESA head bracket makes it convenient to remove the entire TV for long term storage..TV SIZE RANGE: 23" to 43" LED LCD PLASMA TVs.LOCKABLE ARM: Locks for transportation.EXTENSION: 2.3" to 15.7".TILT: +10/- degrees.SWIVEL: +/- 90 degrees.VESA COMPATIBILITY: 75x75,100x100,200x100,200x200 (mm).Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

This high-quality motorized TV mount goes right above your fireplace and offers comfortable eye-level viewing. Conveniently bring your TV down using the remote control when it is time to watch your favorite show or sports event. Compared to conventional fireplace TV mounts, the recessed base design allows your TV to sit flush to the wall when in the upper position with an extremely low 1.65" profile. This mantel mount is compatible with TV sizes between 42" and 80" and up to 110 lbs. in weight*. Smooth, remote controlled gas spring height adjustment of up to 24.8", 30° left and right manual swivel as well as a -5°/+10° tilt ensure you will have the perfect, glare-free viewing experience. Compatible with VESA patterns from 100x100 to 600x500. *Please note that only TVs with screen size 60" and larger will fully cover the recessed box in the upper position. With TVs smaller than 60" a part of the box can be visible. External power source (in-wall or on-wall) as well as 16" stud spacing required for installation. We recommend consulting a professional installer for the installation of this motorized recessed base TV mount. Suitable for use above decorative fireplaces with max. 100°F heat development..This motorized fireplace TV mount supports screens from 42" to 80" and up to 110 lbs..The recessed base allows the mount arm to retract completely, keeping your TV flush to the wall when raised..A built-in RF remote lets you lower and raise the TV effortlessly with the touch of a button..Compatible with VESA patterns from 100x100, 200x200, 300x300, 300x200, 400x200, 400x300, 400x400, 600x400, 600x500 for a wide range of flat-panel TVs..Ideal for use above decorative fireplaces with mantels up to 14.5" deep and heat output not exceeding 100°F..Designed for installation on standard 16" stud spacing with a recessed wall cavity of 29"H x 14.5"W x 3.5"D..UL certified motor ensures safe, smooth operation and long-term reliability..Supported by Manufacturer's Limited Lifetime Warranty..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Transform your fireplace space into a seamless entertainment zone with our motorized recessed TV mount, offering hidden storage, smooth remote-controlled motion, and optimal eye-level viewing for larger screens.

The Pro Series 37"-70" Extension Mount by Stanley is designed for quality, performance and dependability. It is designed and built for most of the lighter but large screens. It is easily adjusted without complicated tools or screws and features integrated cable covers. It has a full 180 degree swivel with a 15 degree tilt and fits 37"-70" TVs..Fits 37"-70" TVs.Holds up to 90lbs.Retracts 3" & extends 19".Tilts 15 degree , swivels 180 degree.VESA pattern compatible up to 600 x 400.Integrated cable covers for clean install.Post-level install capabilities

Capable of supporting panels up to 120”, PMX800 adjustable wall mount can be horizontally offset 11” in either direction to dial in the lateral placement of your display. An oversized 900×600 VESA interface improves compatibility with extra-large touch screens and provides flexibility for vertical positioning. With 31.3” of extension, this full motion wall mount gives you all the swivel needed to get the perfect viewing angle. Its low-profile design allows your TV to sit 2.6” from the wall when fully retracted and features all-metal cable management and lag bolt covers to stand the test of time. Toolless tilt rounds off PMX800’s extensive feature set allowing for on-the-fly adjustments..This is a Articulating Wall Mount..Dimensions of this mount are (HxWxD) 25" x 37.8" x 2.6" (31.3 inches when fully extended).Supports TVs from 55 to 120 inches, up to 200 lbs..It comes with a 10 years warranty..Horizontal Offset Provides up to 11 inches of horizontal adjustment in either direction, allowing for precise TV placement even if studs are not ideally positioned.Durability Constructed with high-quality steel for long-lasting strength and stability.Don’t let the size of your TV dictate where you put it.