Tube Cutters
3 results
HV Tools Pipe Cutter is designed for the cutting of pipe. The cutter features a quick-feed carriage adjustment which allows you to bypass the feed threads and engage the cutting surface quickly. Four contact rollers provide greater cutting stability and reduce the risk of spiraling. The large knurled handle maximizes torque when cutting through tough metals..Pipe Cutter.2 x 4 x 8.The cutter features a quick-feed carriage adjustment which allows you to bypass the feed threads and engage the cutting surface quickly..Four contact rollers provide greater cutting stability and reduce the risk of spiraling.he large knurled handle maximizes torque when cutting through tough metals.
Ridgid® 2 9/16" Close quarters midget tube cutter with cutting length of 3/16" - 15/16" OD is designed to use in restricted spaces on small diameter, hard/soft copper, aluminum, brass and plastic tubing. Tube cutter features knurled knob handle..Length: 2 9/16 in.Cutting capacity: 3/16 - 15/16 in outer diameter.Handle type: Knurled knob.Weight: 1/3 lb..Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts.Strong, lightweight slide and wheel housing, large knurled feed screw knob gives easy control of cutting pressure for clean cuts.Grooved rollers for close-to-flare cuts.E-3469 standard wheel.For aluminum, brass, copper, plastic tubing; Replacement wheel: 4CW65.Ridgid® Close Quarters Midget Tube Cutter is strong and has lightweight slide and wheel housing. Its large knurled feed screw knob gives easy control of cutting pressure for clean cuts.
Ridgid® Heavy-duty replacement tube cutter wheel is designed to fit model 105 and 205. Replacement tube cutter wheel is ideal to use with stainless steel tube cutter..Type: Replacement, heavy duty.Fits model: 105, 205.For stainless steel tube cutter.0.162 in blade expansion.Fits model:105, 205.Ridgid® Heavy Duty Replacement Tube Cutter Wheel, Fits model: 105, 205 is precision-machined from high-grade steel and is engineered for long life and maximum cutting accuracy.
You May Also Like
Ridgid® 26" Center cut bolt cutter features rubber grip steel handle and hardened alloy steel jaws for durable blade life. Bolt cutter is designed to cut soft steel, nonferrous metals, bolts, screws, rivets and wire..Type: Center cut.Length: 26 in.Cutting capacity: Soft (15RC): 7/16 in, medium (31RC): 3/8 in, hard (42RC): 5/16 in.Handle type: Rubber grip steel.Weight: 5 7/8 lb.Hardened alloy steel jaws are designed and manufactured to assure the longest possible blade life.One-step internal cam mechanism provides the quickest and simplest way to keep the cutting blades precisely aligned.Handles and grips designed to allow greater mechanical advantage for crisp, controlled cutting.Soft steel and nonferrous metals, bolts, screws, rivets, wire; Has Stainless steel, spring wire, heat-treated rod and reinforcing rod.Application: Center cut for soft, medium and hard metal; Iron and steel.Soft steel and nonferrous metals, bolts, screws, rivets, wire.Iron and steel.Ridgid® Center Cut Bolt Cutter handles and grips are designed to allow greater mechanical advantage for crisp and controlled cutting.
Ridgid® Heavy-duty replacement pipe cutter wheel is designed to fit model 1A, 202, 2A, 360, 42A, 732 and 820/364. Replacement pipe cutter wheel is ideal to cut steel or ductile iron pipe..Type: Replacement, heavy duty.Fits model : 1A, 202, 2A, 360, 42A, 732, 820/364.For steel or ductile iron pipe.0.312 in blade expansion.Ridgid® Heavy Duty Replacement Pipe Cutter Wheel, Fits 1A, 202, 2A, 360, 42A, 732, 820/364 and is ideal for steel or ductile iron pipe.
Ridgid® Standard thin replacement pipe cutter wheel is designed to fit model 1A, 202, 2A, 360, 42A, 732 and 820/364. Replacement pipe cutter wheel is ideal to cut steel or ductile iron pipe..Type: Replacement, standard thin.Fits model : 1A, 202, 2A, 360, 42A, 732, 820/364.For steel or ductile iron pipe.0.312 in blade expansion.Ridgid® Standard Thin Replacement Pipe Cutter Wheel, Fits 1A, 202, 2A, 360, 42A, 732, 820/364 and is ideal for steel or ductile iron pipe.
Klien Tools Heavy-Duty Diagonal Cutter Pliers are made with tough alloy steel to ensure lasting performance. The pliers are plastic dipped and have long-lasting knives for smooth cutting..Material: Alloy Steel.Cut Type: Bevel.Handle Type: Plastic-Dipped.Cutting Direction: Straight.Finish: Black Oxide.Features: Induction Hardened & Long-lasting Cutting Knives.Warranty: 1 Year.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Klien Tools Heavy-Duty Diagonal Cutter Pliers - Made with alloy steel that ensures smooth cutting
Ridgid® Replacement pipe cutter wheel is designed to fit model 44S, 466C, 466S, 468S and 764. Replacement pipe cutter wheel is ideal to cut stainless steel pipe..Type: Replacement.Fits model: 44S, 466C, 466S, 468S, 764.For stainless steel pipe.0.411 in blade expansion.Ridgid® Replacement Pipe Cutter Wheel, Fits 44S, 466C, 466S, 468S, 764 is ideal for steel or ductile iron pipe.
Channellock® 6" Slip joint thick nose shear wire cutter plier features Channellock® Blue® grips for comfort. Plier has Permalock® fastener that eliminates nut and bolt failures..Length: 6-inch.Cutting capacity: 3/4-inch Jaw Opening.Size: 0.96-inch Jaw Length.Throat depth: 1.89-inch.Handle type: Plastic Dipped Cushion Grip.Wire cutting shear.Permalock® fastener eliminates nut and bolt failures.Channellock® Blue® grips for comfort.Joint thickness: 0.43-inch, joint width: 1.28-inch.Throat depth: 1.89".Channellock® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention.Permalock® fastener eliminates nut and bolt failure.Made in USA.Channellock® Shear Wire Cutter Plier, Wire Stripping Plier is made of high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention.
Ridgid® High Carbon Steel Pipe Tap, 9/16 - 18, 3/8 in NPT.Thread size: 9/16 in.Thread per inch: 18.Thread type: NPT.Nominal size: 3/8 in.Material: High carbon steel.All taps have taper of 3/4 in per foot.Marked with drill size for pilot hole.Especially suited for restricted area work.Cutting Direction: Right.Weight: 1/4 lb..Ridgid® High Carbon Steel Pipe Tap is suited for restricted area work.
Knipex® Chrome vanadium steel jaw wire rope cutter features plastic coated steel handle and bolted joint for precise blade guidance. Cutter comes with two crimping dies for end caps on bowden cable sheaths and end ferrules for traction cables..Size: 5/16 in jaw length x 1 1/32 in jaw width.Length: 190 mm.Cutting capacity: 6 mm wire rope.Handle type: Plastic coated steel.Material: Steel jaw.Comes with two crimping dies for end caps on Bowden cable sheaths and end ferrules for traction cables;.Bolted joint for precise blade guidance, re-adjustable.High leverage for reduced effort; Cutting-edge hardness approximate 64 HRC.Chrome vanadium heavy-duty steel, forged, oil-hardened; Application: Cuts all wire ropes and high tension wire; 15/64 in jaw capacity.Also cuts 6 And 7 mm Cu + Al multi-conductor cable, strand and multi-stranded, 4 mm Iron, 4 mm medium hard wire, 2.5 mm piano wire and 7 AWG.Knipex® Chrome Vanadium Steel Jaw Wire Rope Cutter cuts all wire ropes without splaying, including extremely strong ones.
Channellock® 7" Straight cutting plier is made of C1080 high carbon steel material for durability. Plier features plastic dipped handle for comfort Forged Steel Blue Comfort Grip..Length: 7-inch.Size: 0.35-inch Jaw Length.Throat depth: 1.89-inch.Handle type: Plastic Dipped Forged Steel Blue Comfort Grip.Material: C1080 High Carbon Steel.End cutting plier/nipper.Perfectly mated laser heat-treated cutter comes with laser heat-treated cutting-edges that last longer.Channellock® uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life.Channellock® uses a high-carbon c1080 steel for superior performance on the job and electronic coating for ultimate rust prevention.Channellock® Blue® grips for comfort.Joint: 0.49-inch thickness x 1.63-inch width, cutting-edge: 1.18-inch.Channellock® Cutting Pliers has knife and anvil style cutting-edge to ensure perfect mating and superior cutting-edge life.
Ridgid® Pro arc hacksaw has durable rubberized hand grip aluminum construction and high-strength bow design resists twisting. Hack saw blade of length 12" has 24 teeth per inch for ripping and provides a comfort grips for better control/power..Length: 12 in blade.Width: 1/2 in blade.Teeth per inch: 24.Handle type: Rubberized hand grips fore.Material: Aluminum.Lightweight aluminum frame.High-strength bow design resists twisting.Accepts 12? blade either at 45° or 90° cut angles.Comfort grips before and after for better control and power.Ridgid® Rubberized Hand Grip Aluminum Pro Arc Hack Saw has superior strength and maximum control.
HV Tools Cable Cutter is designed to cut almost all kinds of cables particularly smaller hard-drawn copper and aluminum cables. Its hardened steel blades ensure consistent cuts and long-term durability. Rounded blade design minimizes cable distortion during cutting..Cable Cutter.1 x 4 x 10.Its hardened steel blades ensure consistent cuts and long-term durability..Rounded blade design minimizes cable distortion during cutting.
Quickie Cut™ 4 1/2" OD x 0.035" Type 27 Cut-Off wheel with arbor size of 7/8" is made of zirconia alumina for durability. 60-Medium grit wheel is designed to cut materials like iron/steel bar, pipe line and stainless steel sheets/bars..Diameter: 4 1/2 in.Thickness: 0.035 in.Arbor size: 7/8 in.Abrasive material: Zirconia alumina.Grit/Grade: 60 (medium).Flexible wheel design for fast cutting and easy work penetration.Recommended for ferrous metals: Angle iron, iron/steel bar, metal decking and cable, pipe line, stainless steel sheets and stainless steel bars.May be used for high tensile steel and non-ferrous metals: Aluminum alloys, copper, brass, bronze and titanium.Quickie Cut™ 4 1/2 in (OD) x 0.035 in (T) 27 ZA Cut-Off Wheel has a flexible design.
Ridgid® High Carbon Steel Pipe Tap, 45/64 - 14, 1/2 in NPT.Thread size: 45/64 in.Thread per inch: 14.Thread type: NPT.Nominal size: 1/2 in.Material: High carbon steel.All taps have taper of 3/4 in per foot.Marked with drill size for pilot hole.Especially suited for restricted area work.Cutting Direction: Right.Weight: 1/4 lb..Ridgid® High Carbon Steel Pipe Tap is suited for restricted area work.
VISE-GRIP® 8" Nickel chromium steel end cutting plier is made of nickel chromium steel material for durability. Plier features plain handle for comfort..Type: End cutting.Size: 1/2 in jaw length x 1 23/32 in jaw width x 1 1/8 in jaw thickness.Length: 8 in.Handle type: Plain.Material: Nickel chromium steel.ProTouch™ grips provide extra comfort and reduces hand fatigue.Induction hardened cutting edge stays sharper with longer life.With wire cutter.VISE-GRIP® Nickel Chromium Steel End Cutting Plier has induction hardened cutting edge that stays sharper with longer life.
For making sure you always have a box cutter on hand without spending lots of money, pick up this disposable steel Jiffi Cutter with replaceable blade. Changing the blade will save you the trouble of having to get a new knife every time the blade gets dull..Single-edge Jiffi cutters with blades for precise cutting.Includes 12 disposable cutters with a blade in each.Uses replacement blades - CUT-40474 (heavy duty) or CUT-40475 (economy).These single-edge Jiffi cutters with blades from Garvey are perfect for general-purpose cutting and trimming applications.
Excel Rotary Cutters are ideal for precisely cutting a variety of materials, including paper, cloth, foam wall paper, mat boards, and more. These cutters feature ergonomically designed grips to keep you comfortable, and retractable safety guards to keep you safe..Ideal for precisely cutting a variety of materials.Ergonomically designed grips.Retractable safety guards to keep you safe.blade size: 1.1" (28 mm).blade size: 1.1 in. (28 mm)